Conceções e práticas de trabalho colaborativo : estudo de caso com professores do 2º ciclo e de apoio educativo de uma escola da Região Autónoma dos Açores

A colaboração é um tema cada vez mais atual nas práticas pedagógicas dos docentes. No que diz respeito a esta temática, a avaliação externa das escolas no seu quadro de referência apela ao trabalho colaborativo entre os docentes, na prestação do serviço educativo, afirmando o acompanhamento e a supervisão da prática letiva e apresentando um papel relevante na monitorização da eficiência das práticas de apoio educativo. Pretendemos, desta forma, investigar as metodologias colaborativas evidenciadas, bem como a partilha de vivências e perspetivas em relação à efetiva prática ou ausência de colaboração, entre professores do 2º ciclo do ensino básico e professores de apoio educativo das disciplinas de Português, Matemática e Inglês, de uma escola da Região Autónoma dos Açores. Para além disso, também investigámos os processos de supervisão das práticas de colaboração. Para a consecução dessa investigação realizámos questionários a professores de turma e de apoio educativo do 2.º ciclo das disciplinas de Português, Matemática e Inglês, para evidenciar as práticas colaborativas entre os professores titulares e os professores de apoio educativo. Também foram realizadas entrevistas às coordenadoras dos respetivos departamentos, sobre a temática da investigação, e à coordenadora dos apoios educativos. Sendo assim, evidenciou-se uma metodologia mista cujas técnicas de análise de dados tiveram como base a análise estatística descritiva e a análise de conteúdo categorial. Desta recolha de dados foi percetível que as práticas colaborativas ainda não são uma realidade entre os docentes de turma do 2.º ciclo e de apoio educativo. Foi notório que essas práticas se centram apenas na troca de informações, de forma informal, ou então em momentos de avaliação, através da realização de relatórios periodais. A noção do conceito de colaboração ainda não se encontra bem definido para esses docentes, no entanto afirmam a importância dos processos colaborativos para o processo de ensino-aprendizagem. No que diz respeito às práticas de supervisão, estas não se encontram instituídas na escola onde decorreu a investigação, nomeadamente a supervisão promotora de processos de colaboração. Esta investigação poderá ser promotora de outros estudos relacionados com a colaboração e a supervisão das práticas colaborativas, bem como um contributo para a abertura a essas mesmas práticas.

Obtenção de polímeros de LCC para aplicação como antioxidante de biodiesel de soja

Biodiesel is a fuel obtained from vegetable oils, such as soy, castorbean, among others. The monoester of fatty acid of these oils have chains with mono, di and tri double connections. The presence of these insaturations are susceptible to oxidization. Antioxidants are substances able to prevent oxidization from oils, fats, fat foods, as well as esters of Alquila( biodiesel). The objective of this work is to summarize a new antioxidant from the Cashew Nut Shell Liquid (CNSL) using the electrolysis technique. A current of 2 amperes was used in a single cell of only one group and two eletrodos of stainless steel 304 in a solution of methanol, together with the eletrolits: acetic acid, sodium chloride and sodium hydroxide, for two hours of agitation. The electrolysis products are characterized by the techniques of cromatography in a thin layer, spectroscopy of infrared and gravimetric analysis. The material was submitted to tests of oxidative stability made by the techniques of spectropy of impendancy and Rancimat (EN 14112). The analyses of characterization suggest that the polimerization of the electrolytic material ocurred. The application results of these materials as antioxidants of soy biodiesel showed that the order of the oxidative stability was obtained by both techniques used

Análise da produção de carga líquida e sólida na bacia do ribeirão do Gama- DF através do modelo SWAT

Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Humanas, Departamento de Geografia, 2016.

A monitorização da carga de treino através da análise tempo-movimento e da perceção subjetiva do esforço, PSE, no futebol

O objetivo do presente estudo foi verificar se existe variação dos parâmetros que caraterizam a atividade motora de jogadores de futebol em treino, obtidos através do Viper Software STATSports, ao longo de vários microciclos (MCs) integrando o período preparatório (PP) e o início do período competitivo (PC), assim como, averiguar a associação existente entre a variação destes parâmetros, MC a MC, e a Perceção Subjetiva do Esforço Sessão (PSE-sessão) respetiva, e verificar, ainda, se existe correlação entre estes parâmetros e a PSE, em cada MC do período considerado. A amostra do estudo foi constituída por 13 jogadores (idade: 25 ± 1,78 anos) de futebol do sexo masculino a competir no escalão de Séniores da Associação Futebol de Setúbal. A recolha de dados ocorreu durante o PP (4 semanas) e o PC (4 semanas). Os jogadores incluídos no estudo cumpriram o único critério definido: a realização total das sessões de treino previstas. Os instrumentos utilizados durante o processo foram o sistema Viper (Viper Software v.1.2, STATSports), integrando um GPS 10 Hz, acelerómetro 100 Hz, cardiofrequencímetro e a escala de PSE adaptada por Foster. Verificou-se elevada variabilidade no comportamento dos parâmetros no PP, mas não nos 3 últimos MCs já integrados no PC. Verificamos forte associação entre os parâmetros Distância Explosiva (r=0,762), Nº Esforços de Elevada Carga Metabólica (r=0,714), Nº Acelerações (r=0,714), Nº Desacelerações (r=0,762) e a PSE-sessão (p˂0,05). O parâmetro com maior potencial preditor de elevados valores da PSE-sessão é a Distância Explosiva (p˂0,001). Por fim, não encontramos uma associação regular entre os parâmetros e a PSE-sessão em cada MC. Os valores de PSE-sessão apresentados durante o estudo são semelhantes a valores apresentados em outros estudos no futebol profissional. Conclui-se que no PP ocorreu a variabilidade de todos os parâmetros e estabilização no PC da Distância Total, Distância de Elevada Carga Metabólica, Distâcia Explosiva, Nº Esforços de Elevada Carga Metabólica e PSE-sessão. A PSE-sessão depende dos parâmetros Distância Explosiva, Nº Esforços de Elevada Carga Metabólica, Nº Acelerações e Nº Desacelerações, i.e., as ações de elevada exigência metabólica e neuromuscular explicam a relação existente entre os parâmetros de carga e a PSE-sessão como indicador global de carga interna. A utilização do sistema Viper possibilita a recolha de parâmetros que descrevem as exigências fisícas a que os jogadores estão sujeitos e fornece informação fundamental para o planeamento do treino em conjunto com a recolha sistemática da PSE-sessão.

Processamento e caracterização de compósitos Poli(METACRILATO DE METILA)/Sílica (PMMA/SiO2)

Currently the search for new materials with properties suitable for specific applications has increased the number of researches that aim to address market needs. The poly (methyl methacrylate) (PMMA) is one of the most important polymers of the family of polyacrylates and polymethacrylates, especially for its unique optical properties and weathering resistance, and exceptional hardness and gloss. The development of polymer composites by the addition of inorganic fillers to the PMMA matrix increases the potential use of this polymer in various fields of application. The most commonly used inorganic fillers are particles of silica (SiO2), modified clays, graphite and carbon nanotubes. The main objective of this work is the development of PMMA/SiO2 composites at different concentrations of SiO2, for new applications as engineering plastics. The composites were produced by extrusion of tubular film, and obtained via solution for application to commercial PMMA plates, and also by injection molding, for improved the abrasion and scratch resistance of PMMA without compromising transparency. The effects of the addition of silica particles in the polymer matrix properties were evaluated by the maximum tensile strength, hardness, abrasion and scratch resistance, in addition to preliminary characterization by torque rheometry and melt flow rate. The results indicated that it is possible to use silica particles in a PMMA matrix, and a higher silica concentration produced an increase of the abrasion and scratch resistance, hardness, and reduced tensile strength

Caracterização microestrutural e elétrica de La(FexNi1-x)O3 sintetizado pelo método da gelatina

The present work deals with the synthesis of materials with perovskite structure with the intention of using them as cathodes in fuel cells SOFC type. The perovskite type materials were obtained by chemical synthesis method, using gelatin as the substituent of citric acid and ethylene glycol, and polymerizing acting as chelating agent. The materials were characterized by X-ray diffraction, thermal analysis, spectroscopy Fourier transform infrared, scanning electron microscopy with EDS, surface area determination by the BET method and Term Reduction Program, TPR. The compounds were also characterized by electrical conductivity for the purpose of observing the possible application of this material as a cathode for fuel cells, solid oxide SOFC. The method using gelatin and polymerizing chelating agent for the preparation of materials with the perovskite structure allows the synthesis of crystalline materials and homogeneous. The results demonstrate that the route adopted to obtain materials were effective. The distorted perovskite structure have obtained the type orthorhombic and rhombohedral; important for fuel cell cathodes. The presentation material properties required of a candidate cathode materials for fuel cells. XRD analysis contacted by the distortion of the structures of the synthesized materials. The analyzes show that the electrical conductivity obtained materials have the potential to act as a cell to the cathode of solid oxide fuel, allowing to infer an order of values for the electrical conductivities of perovskites where LaFeO3 < LaNiO3 < LaNi0,5Fe0,5O3. It can be concluded that the activity of these perovskites is due to the presence of structural defects generated that depend on the method of synthesis and the subsequent heat treatment

Avaliação da adição de Nanosílica e silicato de sódio em pastas de cimento para poços de petróleo com baixo gradiente de fratura

The oil wells cementing is a critical step during the phase of well drilling, because problems during the operation of slurry pumping and an incomplete filling of the annular space between the metal casing and the formation can cause the slurry loss. Therefore, the slurry adopted in primary cementing an oil well must be properly dosed so that these problems are avoided during its pumping. When you drill a well in a weak rock formation requires even more careful, because should be a limit of hydrostatic pressure exerted during cementation, that does not occur rock collapse. With the objective of performing the cementing of a well whose formation is weak or unconsolidated are employed lighter slurries. Thus, this study used slurries with sodium silicate and nano silica in concentrations of 0,1; 0,4; 0,7 e 1,0 gpc, in which the slurries with nano silica showed the rheological parameters higher concentrations of up to 0.7 gpc and for concentration of 1.0 the slurry with sodium silicate obtained the highest values, remaining above the limits for application in fields, mainly wells with low fracture gradient, because a significant increase in viscosity may result in an increase in pressure pumping in operations of secondary cementations. Furthermore, there was no decrease in strength with increasing concentration of additive. Then, it is possible use of these additives to formulate Lighter slurry

Influência do método de síntese e caracterização de pós compósitos de NiO- Ce1-xEuxO2-δ para anodos catalíticos de células a combustível

Fuel cells are electrochemical devices that convert chemical energy into electricity. Due to the development of new materials, fuel cells are emerging as generating clean energy generator. Among the types of fuel cells, categorized according to the electrode type, the solid oxide fuel cells (SOFC) stand out due to be the only device entirely made of solid particles. Beyond that, their operation temperature is relatively high (between 500 and 1000 °C), allowing them to operate with high efficiency. Another aspect that promotes the use of SOFC over other cells is their ability to operate with different fuels. The CeO2 based materials doped with rare earth (TR+3) may be used as alternatives to traditional NiO-YSZ anodes as they have higher ionic conductivity and smaller ohmic losses compared to YSZ, and can operate at lower temperatures (500-800°C). In the composition of the anode, the concentration of NiO, acting as a catalyst in YSZ provides high electrical conductivity and high electrochemical activity of reactions, providing internal reform in the cell. In this work compounds of NiO - Ce1-xEuxO2-δ (x = 0.1, 0.2 and 0.3) were synthesized from polymeric precursor, Pechini, method of combustion and also by microwave-assisted hydrothermal method. The materials were characterized by the techniques of TG, TPR, XRD and FEG-SEM. The refinement of data obtained by X-ray diffraction showed that all powders of NiO - Cex-1EuxO2-δ crystallized in a cubic phase with fluorite structure, and also the presence of Ni. Through the characterizations can be proved that all routes of preparation used were effective for producing ceramics with characteristics suitable for application as SOFC anodes, but the microwave-assisted hydrothermal method showed a significant reduction in the average grain size and improved control of the compositions of the phases

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.