Relevância de compostos de baixa massa molar produzidos por fungos e envolvidos na biodegradação da madeira

Over the last decade, evidences have been shown that the wood biodegradation by fungi is not only a result of the action of their enzymatic machinery but also of various low molecular weight non-enzymatic compounds, especially in fungi that promote brown and white decay, which in nature are the major wood decaying microorganisms. The present review focuses on the recent theories involving these low molecular weight compounds that act direct or synergistically with lignocellulolytic enzymes to attack the wood main macromolecular constituents, their relevance as potential degradative systems, in the overall wood biodegradation, and also outlines their potential biotechnological applications.

Uma visão sobre a estrutura, composição e biodegradação da madeira

Wood is the main raw material used in the pulp and paper industry. It is a material that presents heterogeneous structure and complex composition, which results in a relatively resistant material to the biodegradation process. In the present review, we attempted to summarize the structural characteristics of wood and describe the chemical nature of its major components to, afterwards, comment about its biodegradation. The role of the enzyme manganese peroxidase in the lignin degradation by a selective white-rot fungus, Ceriporiopsis subvermispora, was highlighted.

Estudo fitoquímico da madeira de Guarea macrophylla (Meliaceae)

In the present work, the crude ethanol extract from wood of G. macrophylla was submitted to liquid/liquid partition between hexane, CH2Cl2, EtOAc and n-BuOH. Each phase was individually chromatographed over silica gel, Sephadex LH-20 or Amberlite XAD-2 to give eight terpene derivatives, such as five sesquiterpenoids (caryophyllene oxide, guai-6-en-10β-ol, spathulenol, aromadendrane-4β,10α-diol and aloaromadendrane-4α,10β-diol) as well as three triterpenoids (cicloart-24-ene-3β,23(R*)-diol, cicloart-24-ene-3β,23(S*)-diol, and cicloart-23E-ene-3β,25-diol). Additionally, were isolated three fatty acids (linolenic, linoleic and stearic), two steroids (sitosterol and stigmasterol) and sacarose. The structures of all these compounds were characterized by spectrometric analysis, mainly mass spectrometry and NMR and comparison of these data described in the literature.

Análise comparativa entre vários métodos de quantificação de hemiceluloses da madeira de eucalipto

Pulp hemicelluloses can be extracted with NaOH and quantified by colorimetric and gravimetric techniques. However the most usual methods to measure eucalyptus pulp hemicelluloses have been through the pentosan method or through xylan analyses by GC or HPLC techniques. In this study a comparison was made between the more traditional methods and indirect method of NaOH 5% extraction followed by colorimetric analyses. It was observed that the content of NaOH 5% extract correlates very well with pulp xylan content and reasonably well with the pentosan content. It is concluded that the 5% NaOH solubility method can be used in replacement of the other two, since it is faster, simpler and less costly to carry out than the others.

Determinação de constituintes químicos em madeira de eucalipto por Pi-CG/EM e calibração multivariada: comparação entre redes neurais artificiais e máquinas de vetor suporte

Multivariate models were developed using Artificial Neural Network (ANN) and Least Square - Support Vector Machines (LS-SVM) for estimating lignin siringyl/guaiacyl ratio and the contents of cellulose, hemicelluloses and lignin in eucalyptus wood by pyrolysis associated to gaseous chromatography and mass spectrometry (Py-GC/MS). The results obtained by two calibration methods were in agreement with those of reference methods. However a comparison indicated that the LS-SVM model presented better predictive capacity for the cellulose and lignin contents, while the ANN model presented was more adequate for estimating the hemicelluloses content and lignin siringyl/guaiacyl ratio.

Uso de aditivos na biodegradação de madeira pelo fungo Ceriporiopsis subvermispora: efeito na peroxidação de lipídios dependente de manganês-peroxidase

Ceriporiopsis subvermispora is a selective fungus in the wood delignification and the most promising in biopulping. Through the lipid peroxidation initiated by manganese peroxidase (MnP), free radicals can be generated, which can act in the degradation of lignin nonphenolic structures. This work evaluated the prooxidant activity (based in lipid peroxidation) of enzymatic extracts from wood biodegradation by this fungus in cultures containing exogenous calcium, oxalic acid or soybean oil. It was observed that MnP significant activity is required to promote lipid peroxidation and wood delignification. Positive correlation between prooxidant activity x MnP was observed up to 300 IU kg-1 of wood.

Classificação de resíduos de madeira tratada com preservativos à base de arseniato de cobre cromatado e de boro/flúor

Classification of waste wood treated with chromated copper arsenate (CCA) and boron/fluorine preservatives, according to NBR 10004, was investigated. The leaching test (ABNT NBR 10005) for As and Cr, and solubilization test (ABNT NBR 10006) for F, were applied to out-of-service wooden poles. Concentrations of As and Cr in leachates were determined by ICP-MS and of F by ESI. Values for As were higher than 1 mg L-1 classifying the waste as hazardous material (Class I) whereas values for F (> 1.5 mg L-1) were non-hazardous but indicated non-inert material (Class IIA).

Stratification of regional sampling by model-predicted changes of carbon stocks in Forested mineral soils

Selective papers of the workshop on "Development of models and forest soil surveys for monitoring of soil carbon", Koli, Finland, April 5-9 2006.

Caracterização através de análise química da escultura portuguesa sobre madeira de produção erudita e de produção popular da época barroca

Making use of several analytical techniques, four erudite and four popular Portuguese baroque wooden sculptures were studied. The materials and techniques employed were identified and the relationship between their artistic quality and the materials used was investigated. In general, the pigments were common at the time, but one pigment discovered in the beginning of the 18th century and two rare arsenic pigments were also identified. In popular sculptures cost-saving was detected, particularly concerning the gold leaf. Regarding some technical procedures identified, recommendations found in historical documents did not seem to have been entirely followed, neither in erudite nor in popular sculptures.