L’Irak au bord de l’éclatement « Les dix péchés capitaux d’une reconstruction ratée »

Les causes de la crise irakienne actuelle sont multiples. Au-delà des implications immédiates, les séquelles de l’intervention militaire de 2003 sont les plus déterminantes. L’échec du processus de reconstruction institutionnelle a donné lieu à un État déficient, dysfonctionnel et corrompu offrant ainsi un terreau fertile à l’implantation et à la prolifération des mouvements terroristes et mafieux. L’auteur tente, dans la présente contribution, d’identifier « les raisons profondes » du drame actuel en tenant compte de l’impact des bouleversements intervenus depuis la chute du régime baathiste en avril 2003 sur les structures étatiques.

Effect of Feeding Rate on Plastic Extrudates

Selected grades of low density polyethylene (LDPE) polystyrene (PS) were extruded in a laboratory extruder by varying the feeding rate at different revolutions per minute and temperatures. The mechanical properties of the extruded plastic sheets were determined. LDPE shows a marked variation in mechanical properties with feeding rate while PS shows a marginal change in mechanical properties with feeding rate. However, for both plastics there is a particular feeding rate in the starved region which results in maximum mechanical properties.

Significance of Feeding Rate in the Extrusion of Filled and Gum 11R Vulcanizates

Filled and gum compounds of Isobutylene-Isoprene rubber were extruded through a laboratory extruder at various feeding rates, different temperatures and revolutions per minute. The extruded compounds were vulcanized up to their optimum cure times and the mechanical properties of the vulcanizates were determined. The properties suggest that there is a particular feeding rate in the starved fed region, which results in maximum mechanical properties. The study shows that running the extruder at a slightly starved condition is an attractive means of improving the physical properties.

A fibre optic evanescent wave sensor for monitoring the rate of pulsed laser deposition of metal thin films

A novel sensing technique for the in situ monitoring of the rate of pulsed laser deposition (PLD) of metal thin films has been developed. This optical fibre based sensor works on the principle of the evanescent wave penetration of waveguide modes into the uncladded portion of a multimode fibre. The utility of this optical fibre sensor is demonstrated in the case of PLD of silver thin films obtained by a Q-switched Nd:YAG laser which is used to irradiate a silver target at the required conditions for the preparation of thin films. This paper describes the performance and characteristics of the sensor and shows how the device can be used as an effective tool for the monitoring of the deposition rate of silver thin films. The fibre optic sensor is very simple, inexpensive and highly sensitive compared with existing techniques for thin film deposition rate measurements

A fibre optic evanescent wave sensor for monitoring the rate of pulsed laser deposition of metal thin films

A novel sensing technique for the in situ monitoring of the rate of pulsed laser deposition (PLD) of metal thin films has been developed. This optical fibre based sensor works on the principle of the evanescent wave penetration of waveguide modes into the uncladded portion of a multimode fibre. The utility of this optical fibre sensor is demonstrated in the case of PLD of silver thin films obtained by a Q-switched Nd:YAG laser which is used to irradiate a silver target at the required conditions for the preparation of thin films. This paper describes the performance and characteristics of the sensor and shows how the device can be used as an effective tool for the monitoring of the deposition rate of silver thin films. The fibre optic sensor is very simple, inexpensive and highly sensitive compared with existing techniques for thin film deposition rate measurements.

An optical fibre based evanescent wave sensor to monitor the deposition rate of thin films

A novel fibre optic sensor for the in situ measurement of the rate of deposition of thin films has been developed. Evanescent wave in the uncladded portion of a multimode fibre is utilised for this sensor development. In the present paper we demonstrate how this sensor is useful for the monitoring of the deposition rate of polypyrrole thin films, deposited by an AC plasma polymerisation method. This technique is simple, accurate and highly sensitive compared with existing techniques.

Anomalous profile of a self-reversed resonance line from Ba+ in a laser produced plasma from YBa2Cu307

A laser produced plasma from the multielement solid target YBa2Cu3O7 is generated using 1.06 μm, 9 ns pulses from a Q-switched Nd:YAG laser in air at atmospheric pressure. A time resolved analysis of the profile of the 4554.03 Å resonance line emission from Ba II at various laser power densities has been carried out. It has been found that the line has a profile which is strongly self-reversed. It is also observed that at laser power densities equal to or exceeding 1.6×1011 W cm−2, a third peak begins to develop at the centre of the self-reversed profile and this has been interpreted as due to the anisotropic resonance scattering (fluorescence). The number densities of singly ionized barium ions evaluated from the width of the resonance line as a function of time delay with respect to the beginning of the laser pulse give typical values of the order of 1019 cm−3. The higher ion concentrations existing at smaller time delays are seen to decrease rapidly. The Ba II ions in the ground state resonantly absorb the radiation and this absorption is maximum around 120 ns after the laser pulse.

Evanescent wave sensor to monitor the etching rate of an optical fibre

The design and development of an evanescent wave sensor to determine the etching rate of the core of an optical fibre is discussed in this paper. The working of the device is based on the principle of propagation and loss of the evanescent wave in the cladding region of the fibre. The fraction of light intensity creeping out of the core of an uncladded fibre is a function of the core radius. As this radius decreases, the evanescent wave coupling to the medium surrounding the core enhances. This results in a decrease of the transmitted light intensity through the fibre. This technique is useful to design and fabricate optical fibres with different core geometries.

Chaotic, memory, and cooling rate effects in spin glasses: Evaluation of the Edwards-Anderson model

We investigate chaotic, memory, and cooling rate effects in the three-dimensional Edwards-Anderson model by doing thermoremanent (TRM) and ac susceptibility numerical experiments and making a detailed comparison with laboratory experiments on spin glasses. In contrast to the experiments, the Edwards-Anderson model does not show any trace of reinitialization processes in temperature change experiments (TRM or ac). A detailed comparison with ac relaxation experiments in the presence of dc magnetic field or coupling distribution perturbations reveals that the absence of chaotic effects in the Edwards-Anderson model is a consequence of the presence of strong cooling rate effects. We discuss possible solutions to this discrepancy, in particular the smallness of the time scales reached in numerical experiments, but we also question the validity of the Edwards-Anderson model to reproduce the experimental results.

Spatial and temporal characteristics of rain intensity in the peninsular Malaysia using TRMM rain rate

The present study is focused on the intensity distribution of rainfall in different classes and their contribution to the total seasonal rainfall. In addition, we studied the spatial and diurnal variation of the rainfall in the study areas. For the present study, we retrieved data from TRMM (Tropical Rain Measuring Mission) rain rate available in every 3 h temporal and 25 km spatial resolutions. Moreover, station rainfall data is used to validate the TRMM rain rate and found significant correlation between them (linear correlation coefficients are 0.96, 0.85, 0.75 and 0.63 for the stations Kota Bharu, Senai, Cameron highlands and KLIA, respectively). We selected four areas in the Peninsular Malaysia and they are south coastal, east coastal, west coastal and highland regions. Diurnal variation of frequency of rain occurrence is different for different locations. We noticed bimodal variation in the coastal areas in most of the seasons and unimodal variation in the highland/inland area. During the southwest monsoon period in the west coastal stations, there is no distinct diurnal variation. The distribution of different intensity classes during different seasons are explained in detail in the results

Effect of Feeding Rate in Polymer Extrusion ”

Starve feeding of single screw extruder was described as an important means of improving the performance characteristics of the extruder. In addition to such improvement with versatility, the starve feeding technique also may affect the mechanical properties of the extrudate since the heat transfer an(l mixing characteristics in the starve fed and Hood fed extruders are not the same. Since the material is more loosely packed in the channels of the starve fed extruder, there may be greater bed mobility and uniformity. Further, the. thermal an(l shear induced degradation are also less since possibilities of developing local high temperatures are less compared to a densely compacted extruder bed. This study has been undertaken mainly to explore the effect of feeding rate on the mechanical properties of rubber and plastic extrudates since the effect of feeding rate has not been analysed from this angle so far.

A Numerically efficient power optimization scheme for coded OFDM systems in achieving minimum frame error rate

Coded OFDM is a transmission technique that is used in many practical communication systems. In a coded OFDM system, source data are coded, interleaved and multiplexed for transmission over many frequency sub-channels. In a conventional coded OFDM system, the transmission power of each subcarrier is the same regardless of the channel condition. However, some subcarrier can suffer deep fading with multi-paths and the power allocated to the faded subcarrier is likely to be wasted. In this paper, we compute the FER and BER bounds of a coded OFDM system given as convex functions for a given channel coder, inter-leaver and channel response. The power optimization is shown to be a convex optimization problem that can be solved numerically with great efficiency. With the proposed power optimization scheme, near-optimum power allocation for a given coded OFDM system and channel response to minimize FER or BER under a constant transmission power constraint is obtained

Identification of models using failure rate and mean residual life of doubly truncated random variables

In this paper, we study the relationship between the failure rate and the mean residual life of doubly truncated random variables. Accordingly, we develop characterizations for exponential, Pareto 11 and beta distributions. Further, we generalize the identities for fire Pearson and the exponential family of distributions given respectively in Nair and Sankaran (1991) and Consul (1995). Applications of these measures in file context of lengthbiased models are also explored

Field measurements of the CO2 evolution rate under different crops during an irrigation cycle in a mountain oasis of Oman

For millennia oasis agriculture has been the backbone of rural livelihood in the desertic Sultanate of Oman. However, little is known about the functioning of these oasis systems, in particular with respect to the C turnover. The objective was to determine the effects of crop, i.e. alfalfa, wheat and bare fallow on the CO2 evolution rate during an irrigation cycle in relation to changes in soil water content and soil temperature. The gravimetric soil water content decreased from initially 24% to approximately 16% within 7 days after irrigation. The mean CO2 evolution rates increased significantly in the order fallow (27.4 mg C m^−2 h^−1) < wheat (45.5 mg C m^−2 h^−1) < alfalfa (97.5 mg C m^−2 h^−1). It can be calculated from these data that the CO2 evolution rate of the alfalfa root system was nearly four times higher than the corresponding rate in the wheat root system. The decline in CO2 evolution rate, especially during the first 4 days after irrigation, was significantly related to the decline in the gravimetric water content, with r = 0.70. CO2 evolution rate and soil temperature at 5 cm depth were negatively correlated (r = -0.56,n = 261) due to increasing soil temperature with decreasing gravimetric water content.

Untersuchungen zum Gesundheitsstatus und zu betrieblichen Maßnahmen der Gesundheitsvorsorge in der ökologischen Schweinehaltung

Im Rahmen dieser Arbeit wurde mittels einer umfassenden und von einer Projektgruppe begleiteten Literaturanalyse sowie anhand von Praxiserhebungen der Frage nachgegangen, wie es um die Tiergesundheit in der ökologischen Schweinehaltung bestellt ist. Ferner wurde untersucht, ob die ökologischen Rahmenrichtlinien (EWG-VO 2092/91) ein Hemmnis für die Sicherstellung eines hohen Gesundheitsstatus der Nutztiere darstellen. Die Literaturauswertung ergab, dass die Erkrankungsraten sowohl auf ökologisch wie auf konventionell geführten Betrieben ein hohes Niveau aufwiesen. Die Ursachen wurden vorrangig in einem unzureichenden betrieblichen Management gesehen, während den EG-Rahmenrichtlinien in der Regel keine maßgebliche Bedeutung für den Gesundheitsstatus beigemessen wurde. In Praxiserhebungen wurde die Status-quo-Situation zur Tiergesundheit auf sechs ökologisch wirt- schaftenden Schweinemastbetrieben erfasst. Ferner wurde untersucht, inwieweit eine Verbesserung des Gesundheitsstatus auf den Betrieben mit einem Mehraufwand an Arbeitszeit und Investitionen verbunden ist. Hierzu wurden die Bereiche Haltung, Fütterung und Hygienemanagement mittels einer Schwachstellenanalyse (Hazard Analysis Critical Control Points-Konzept) beurteilt. Der Zeit- bedarf für Maßnahmen zur Gesundheitsvorsorge wurde durch Arbeitszeitaufzeichnungen erfasst. Die Untersuchungen zeigten, dass auf den Betrieben zum Teil erhebliche Mängel im Hygiene- management bestanden. Anhand von Schlachtkörperbefunden wurde eine hohe Rate pathologischer Leberveränderungen, verursacht durch Larven des Schweinespulwurms Ascaris suum, diagnosti- ziert. Insgesamt wiesen die Schlachtkörper der Tiere von den sechs Betrieben mit durchschnittlich 48,8 % sowie die Schlachtkörper von ökologischen Vergleichsbetrieben mit 63,9 % signifikant höhere Befundraten auf als die Schlachtkörper konventioneller Vergleichsbetriebe (17,4 %). Der Arbeitszeitbedarf für die Mastschweinehaltung auf den sechs Betrieben variierte zwischen 2,0 und 3,7 Arbeitskraftstunden pro Mastplatz und Jahr und lag damit deutlich höher als vergleichbare Literaturdaten. Zwischen den Betrieben traten hohe Unterschiede hinsichtlich der zeitlichen Aufwendungen für Hygiene- und Tiergesundheitsmaßnahmen auf. Während der Interventionsphase wurden das Entwurmungs- und das Hygieneregime der sechs Betriebe optimiert. Die Buchten wurden ordnungsgemäß gereinigt und desinfiziert und der erforderliche Arbeitszeitaufwand quantifiziert. Dieser lag zusammen mit den zusätzlichen Kosten um ca. 46 % höher als der betrieblich übliche Arbeitszeitaufwand. Betriebe mit neu konzipierten Ställen und glatten Buchtenböden und -wänden konnten diese mit vergleichsweise geringem Arbeitsaufwand reinigen und desinfizieren. In einigen Altgebäuden hingegen war aufgrund rauer und schadhafter Oberflächen eine ordnungsgemäße Reinigung und Desinfektion nur bedingt durchzuführen. Die Rate der Leberveränderungen am Schlachthof konnte von durchschnittlich 48,9 % auf 32,7 % gesenkt werden. Während sich die Befundraten auf einigen Betrieben signifikant verbesserten, trat bei der Nutzung von unrenovierten Ställen in Altgebäuden keine Besserung ein. Es wird geschlussfolgert, dass die Rahmenbedingungen der EG-Verordnung einem hohen Tiergesundheitsstatus nicht entgegen stehen, in der Regel jedoch mit einem erhöhten Aufwand für Hygienemaßnahmen verbunden sind. Voraussetzung für eine geringe Parasitenbelastung sind ein konsequent umgesetztes Hygiene- und Entwurmungsregime sowie gut zu reinigende Buchten. Letzteres ist allerdings bei der Nutzung von Altgebäuden nicht immer gegeben.