Lappeenrannan ulkovalaistusverkon verkkotietojärjestelmän modernisointi

Sähköisen verkon täsmällinen tunteminen on edellytys verkon tehokkaalle suunnittelulle ja käytölle. Lappeenrannassa ulkovalaistusverkon dokumentointi oli lähtökohtaisestei hyvin hajanaista. Tämän tutkimuksen tärkein anti oli tarjota Lappeenrannan kaupungille dokumentointiratkaisu, jolla ulkovalaistusverkon dokumentaatio ja topologia saatetaan moderniin sähköiseen muotoon. Tutkimus jakaantui neljään eri pääkohtaan: Lappeenrannan ulkovalaistusverkon tutkimustyöhön, verkkotietojärjestelmien tutkimustyöhön, dokumentointiprosessin määrittelyyn ja verkkotietojärjestelmien ylläpitoprosessin määrittelyyn. Näissä on käytetty merkittävissä määrin asiantuntijoiden lausuntoja, erityisesti ulkovalaistusverkon rakenteesta ja eri verkkotietojärjestelmien ominaisuuksista sekä käytöstä. Näihin perustuen on muodostettu kuva uuden verkkotietojärjestelmän vaatimuksista ja dokumentoinnin lähtötasosta, joiden avulla on määritelty itse dokumentointiprosessi, sen potentiaaliset ongelmat ja arvioitu työmäärää. Ylläpitoprosessien määrittelyssä on käytetty lähtökohtana Lappeenrannan Energiaverkot Oy:n nykyisiä ylläpitoprosesseja ja -menetelmiä. Tutkimuksen tuloksena syntyi määrittelyt kolmelle eri verkkotietojärjestelmälle, joilla ongelma saadaan ratkaistua. Näistä kaksi täytti vaatimukset täysin: Trimble NIS ja Keypron KeyLight.

Näin opetan lisäävää valmistusta ja 3D-tulostusta: Pohdintoja uuden teknologian opetuksesta ja koulutuksesta

Additive manufacturing (shortened as AM), or more commonly 3D printing, consists of wide variety of different modern manufacturing technologies. AM is based on direct printing of a digital 3D model to a final product which is fabricated adding material layer by layer. This is from where term additive manufacturing has its origin. It is not only material what is added, but it is also value, properties etc. which are added. AM enables production of different and even better products compared to conventional manufacturing technologies. An estimation of potential of additive manufacturing can be gathered by considering the potential of laser cutting, which is one of the most widely used modern manufacturing technologies. This technique has been used over 40 years, and whole market around this technology is at the moment c. four billion euros and yearly growth is around 10 %. One factor affecting this success of laser cutting is that laser cutting enables radical improvements to products made of flat sheet. AM and 3D printing will do the same for three dimensional parts. Laser devices, which are at the moment used in 3D printing, are globally at the moment only around 1% of all laser devices used in any fabrication technology, so even with a cautious estimate the potential growth of at least 100 % is coming in next few years. Role of education is very important, when this kind of modern technology is industrially implemented. When both generation entering to work life and also generation who has been a while in work life understands new technology, its potential and limitations, this is the point when also product design can be rethought Potential of product design is driving force for wide use of additive manufacturing and 3D printing. Utilization of additive manufacturing and 3D printing is also opportunity for Finland and Finnish industry. This technology can save Finnish manufacturing industry. This technique has stron potential, as Finland has traditionally strong industrial know-how and good ICT knowledge.

Knowledge governance, innovation and development

This paper aims to be a very preliminary effort to contribute to a better understanding of the interaction among innovation, competition and intellectual property policies from an evolutionary-developmental perspective. As such, it seeks to build a more coherent framework within which the discussions of both institution building and policy design for development can proceed. In order to accomplish that, the paper introduces the concept of "Knowledge Governance" as an alternative analytical and policy-oriented approach, and suggests that from a public policy/public interest perspective, and within an evolutionary framework, it is a better way to address the problems concerning the production, appropriability and diffusion of knowledge. In doing so, it also intends contribute to broaden the ongoing discussions on the "New Developmentalism".

Exploring knowledge worker motivation in autonomous and interdependent problem solving tasks on virtual platforms

The objective of this study is to understand why virtual knowledge workers conduct autonomous tasks and interdependent problem solving tasks on virtual platforms. The study is qualitative case study including three case organizations that tap the knowledge of expert networks, and utilize virtual platforms in the work processes. Research data includes 15 interviews, that is, five experts from each case company. According to the findings there are some specific characteristics in motivation to work on tasks on online platforms. Autonomy, self-improvement, meaningful tasks, knowledge sharing, time management, variety of contacts, and variety of tasks, and projects motivate virtual knowledge workers. Factors that may enhance individuals’ engagement to work on tasks are trust, security of continuous task flow and income, feedback, meaningful tasks and tasks that contribute to self-improvement, flexibility and effectiveness in time management, and virtual tools that support social interaction. The results also indicate that there are some differences in individuals’ motivation based on the tasks’ nature. That is, knowledge sharing and variety of contacts motivated experts who worked on interdependent problem solving tasks. Then again, autonomy and variety of tasks motivated experts who worked on autonomous tasks.

Hiljaisen tiedon hyödyntäminen verkostoituneen yrityksen ict-ryhmässä

Työn alustavana tavoitteena oli havaita yrityksen ict-ryhmässä käytettävien teknisten välineiden, informaation hallinnan järjestelmien ja ryhmän työtilojen vaikutus hiljasen tiedon jakamiseen tai sen estymiseen. Työssä tarkasteltiin myös vaikutusta ryhmän oppimiseen sekä ryhmään muodostuvan hiljaisen tiedon syntymisen ja henkilöitymisen syihin sekä hiljaisen tiedon laatuun. Lisäksi työssä pyritään löytämään tapoja, joiden avulla hiljaista tietoa voidaan hyödyntää ja jakaa ryhmässä siten että se mahdollistaa myös ryhmän oppimisen. Haastatteluissa nousivat esiin informaation hallintaongelmat, jotka johtuvat informaation hajautumisesta informaation eri hallinta järjestelmiin, tietoturvamääräysten aiheuttamiin esteisiin ja kriittisen teknisen dokumentaation tallentamiseen. Nämä vaikeuttavat tallennetun informaation hyödyntämistä ict-ryhmässä. Tämä osaltaan aiheuttaa hiljaisen tiedon henkilöitymistä ryhmässä ja hiljaisen tiedon jakamisen menetelmien jää hyödyntämättä. Haastatteluissa osoittautui, että hiljaisen tiedon hyödyntämisongelmat johtuvat osittain ryhmän sisäisten yhteyksien verkoston rakenteesta. Vahvojen linkkien vähyys ryhmässä ja vahvojen linkkien suuntautuminen ryhmän ulkoisiin verkostoihin vaikeuttaa hiljaisen tiedon siirtymistä ryhmässä ja aiheuttaa hiljaisen tiedon henkilöitymistä. Kiire todettiin ryhmän kannalta ongelmalliseksi hiljaisen tiedon jakamisen ja hyödyntämisen esteeksi. Tiedon adaptaatioon ja omaksumiseen liittyvät ongelmat ovat sidoksissa aikaan ja hiljaisen tiedon henkilöitymiseen ryhmässä. Ryhmätyö ja ryhmän päivittäisessä toiminnassa käytettävissä olevat hiljaisen tiedon jakamisen menetelmät osoittautuvat sopivimmiksi edistämään ryhmän yhteistyökykyä sekä sosiaalisen rakenteen ja luottamuksen kehittymistä. Ne poistavat myös tiedon omaksumisen ja adaptaation esteitä. Ryhmätyö vaikuttaa myönteisesti ryhmän kollektiiviseen osaamiseen ja ryhmän hiljaisen tiedon kehittymiseen. Lisäksi se parantaa teknisen dokumentaation ymmärrettävyyttä.

Putting the horse before the cart: a pragmatist analysis of knowledge

The definition of knowledge as justified true belief is the best we presently have. However, the canonical tripartite analysis of knowledge does not do justice to it due to a Platonic conception of a priori truth that puts the cart before the horse. Within a pragmatic approach, I argue that by doing away with a priori truth, namely by submitting truth to justification, and by accordingly altering the canonical analysis of knowledge, this is a fruitful definition. So fruitful indeed that it renders the Gettier counterexamples vacuous, allowing positive work in epistemology and related disciplines.

Social media in the purchasing of knowledge-intensive business services

The purpose of this thesis was to understand how industrial buyers utilize social media in the purchasing of knowledge-intensive business services. By combining theories from past research a theoretical framework was formed to visualize the role of the social media at the different stages of the purchasing process. The subject was approached from the industrial buyers’ perspective instead of the knowledge-intensive business firm. The research was conducted using two qualitative research methods: interviews and netnography. The selected interviewees have been involved in the decision-making unit for purchasing knowledge-intensive business services. Additionally all of them are using various social media. Based on the interviews social media is used merely to support decision-making. Some of the interviewees had also shared their own experiences about the service and collaboration with the service provider with other social media users. Based on the interviews two social media were chosen for closer examination. The findings from netnography support the results from the interviews. The outcome of knowledgeintensive business services is dependable of the professionals. Therefore the information is used during decision-making process to confirm the formed image of the service, and the professionals of the service provider. Information obtained from social media complements information provided by the supplier. Even though the interviewees had not themselves used social media to find information about the service during search process, finding from netnography suggest it to exist. Industrial buyers ask other users’ opinions and experience about the services, and receive recommendations to them. Some recommendations are given publicly, but more discreet information is shared in private conversations. Observations in social media show that industrial buyers might be exposed to triggers to promote problem recognition as well. Companies share news and successful customer cases through their social media profiles, which might affect the industrial buyers, but to confirm this requires further research. The industrial buyers’ use of social media during different purchasing processes of knowledgeintensive business services can be conceptualize based on the findings. This helps companies to create right content to their social media pages, and encourage professionals to develop their networks in social media.

Intellectual capital, knowledge management practices and firm performance

Researchers have widely recognised and accepted that firm performance is increasingly related to knowledge-based issues. Two separately developed literature streams, intellectual capital (IC) and knowledge management (KM), have been established as the key discussions related to knowledge-based competitive advantage of the firm. Intellectual capital has provided evidence on the strategic key intangible resources of the firm, which could be deployed to create competitive advantage. Knowledge management, in turn, has focused on the managerial processes and practices which can be used to leverage IC to create competitive advantage. Despite extensive literature on both issues, some notable research gaps remain to be closed. In effect, one major gap within the knowledge management research is the lack of understanding related to its influence on firm performance, while IC researchers have articulated a need to utilise more finegrained conceptual models to better understand the key strategic value-creating resources of the firm. In this dissertation, IC is regarded as the entire intellectual capacity, knowledge and competences of the firm that can be leveraged to achieve sustained competitive advantage. KM practices are defined as organisational and managerial activities that enable the firm to leverage its IC to create value. The objective of this dissertation is to answer the research question: “What is the relationship between intellectual capital, knowledge management practices and firm performance?” Five publications have addressed the research question using different approaches. The first two publications were systematic literature reviews of the extant empirical IC and KM research, which established the current state of understanding regarding the relationship between IC, KM practices and firm performance. Publications III and IV were empirical research articles that assessed the developed conceptual model related to IC, KM practices and firm performance. Finally, Publication V was among the first research papers to merge IC and KM disciplines in order to find out which configurations could yield organisational benefits in terms of innovation and market performance outcomes.

Open Access in Times of Knowledge Unlatched : Cooperative Action for Books and Journals

Presentation at the seminar "Publishers and Funders for OA in Finland", Helsinki, May 24, 2016

Can low domain knowledge be compensated for when using the internet? /

Previous researchers have found that learners do not benefit fi-om using the Internet when domain knowledge is low. The purpose of the current study was to investigate possible methods to compensate for low domain knowledge. Specifically, the presence of notes, more time to search the Internet, and high levels of motivation to use the Internet were examined as possible compensating factors. Sixty Political Science and Kinesiology undergraduate students were randomly assigned to one of three conditions. Students searched the Internet for an hour prior to vmting an essay with notes present, searched the Internet for an hour prior to writing an essay without notes present, or did not search the Internet prior to completing an essay. Each participant completed the same two essays, one corresponding to a high knowledge domain and another corresponding to a low knowledge domain. First, the presence of notes did not significantly improve essay scores in comparison to the absence of notes. Second, learners did benefit fi-om using the Internet for 1 hour in comparison to their peers who were not exposed to the Internet, regardless of level of domain knowledge. Third, high levels of motivation did not affect essay performance. A discussion of why time may have compensated for low domain knowledge while notes and motivation did not is included. In addition, methods that may compensate for low domain knowledge when time is restricted are suggested.

Knowledge and attitudes of Registered Nurses toward pain /

This research provided relevant data to support pain research literature that finds nurses do not have the knowledge base that they require to sufficiently provide effective pain management. The data demonstrated that nurses have mixed attitudes toward pain. These two findings have been observed in the literature for more than 20 years, but were important results for the hospitals and the nurses involved in the study. The purposes of this study were to identify the level of knowledge and attitudes in a sample of nurses fi-om the surgical and medical units in three hospitals, and determine whether a difference between these two groups existed. The institutional resources to support pain relief practices provided by each hospital were also documented. Data were collected using a convenience sample from the medical and surgical units of three hospitals. Ofthe 1 13 nurses who volunteered to participate, 78 worked in surgical units and 35 worked in medical units. Demographic data were collected about the participants. The established instruments used to obtain data about knowledge and attitude included: (a) Nurses Knowledge of Pain Issues Survey, (b)Attitude to Pain Control Scale, and (c) Andrew and Robert Vignette. Data collected were quantitative along with two open-ended questions for a rich, qualitative section. Inadequate knowledge and outdated attitudes were very evident in the responses. Data from the open-ended questions described how nurses assessed pain and the most conmion problems caring for patients in pain. Nursing practice implications for these hospitals involve initiating a process to develop an educational pain program for nurses throughout the hospital. Utilizing findings from other studies, the program should have an interdisciplinary approach to the planning, implementation, evaluation, and ongoing support. This study supports the belief that inadequate pain management has been attributed to many factors, most importantly to a lack of knowledge. Pain is a costly, unnecessary complication for the patient as well as the hospital. It follows then, that it is in the best interest of all involved to implement an educational pain program in order to influence practice.

Our future in geriatrics : an examination of the knowledge, attitudes and career choices of physical therapy students in Ontario : a pretest-posttest study /

There continues to be a shortage of health professionals interested in providing care for the older adult. Part of the problem seems to stem from the negative perceptions of geriatrics as a clinical speciality. This study examines the knowledge, attitudes and career decisions of physical therapy students in Ontario before and after an educational intervention. Surveys were conducted with 144 physical therapy students from five universities before and after their geriatrics course in order to measure their knowledge, attitudes and interest in working with older adults. The incoming class of physical therapy students (n = 1 86) acted as control subjects for the study. The Revised Palmore Facts On Aging Quiz measured the students' knowledge of aging (Miller & Dodder, 1980). The Revised Tuckman-Lorge (Axelrod & Eisdorfer, 1961) and the Kogan Old People Scales (Kogan, 1961) were used to examine attitude. An environmental scale was developed based on the work of Snape (1986) to measure the impact of the working conditions on the students' career choices. A 10-point Likert-type scale based on the work of Michlelutte & Diseker (1985) was modified and used to measure career interest in working with the elderly. On independent sample t-tests, positive attitudes were related to the demographic characteristic of gender; ethnicity was negatively related; and marital status was found to be unrelated to attitude (fi<.05). Having a relationship with an older adult and taking courses in gerontology were also found to be positively related to attitude (fi<.05). Results on a betweensubjects design which compared students before and after the course found that knowledge scores improved from pretest to posttest (fi<.05). In general, attitude scores improved from T1 to T2 on both measurement tools (b<.05). The environmental and vocational interest scales yielded statistically significant differences between the control and experimental groups during the intervention period (p<.05). The results of this research indicated that knowledge and attitudes improve after an educational intervention; however, there was little impact on the students' overall career decisions. Further research is indicated to examine the complex relationship between attitude and behaviour and its impact on students' career choices. In addition, the impact of geriatric clinical environment on students' attitudes and career decisions needs to be further explored.

Timing of di-ammonium phosphate addition to fermenting chardonnay must : effect on nitrogen utilization, ethyl-carbamate formation, and CAR1 expression by yeast /

The maximum amount of ethyl carbamate (EC), a known animal carcinogen produced by the reaction of urea and ethanol, allowed in alcoholic beverages is regulated by legislation in many countries. Wine yeast produce urea by the metabolism of arginine, the predominant assimilable amino acid in must. This action is due to arginase (encoded by CARl). Regulation of CARl, and other genes in this pathway, is often attributed to a well-documented phenomenon known as nitrogen catabolite repression. The effect of the timing of di-ammonium phosphate (DAP) additions on the nitrogen utilization, regulation of CARl, and EC production was investigated. A correlation was found between the timing of DAP addition and the utilization of nitrogen. When DAP was added earlier in the fermentations, less amino nitrogen and more ammonia nitrogen was sequestered from the media by the cells. It was also seen that early DAP addition led to more total nitrogen being used, with a maximal difference of ~25% between fermentations where no DAP was added versus addition at the start of the fermentation. The effect of the timing ofDAP addition on the expression of CARJ during fermentation was analyzed via northern transfer and the relative levels of CARl expression were determined. The trends in expression can be correlated to the nitrogen data and be used to partially explain differences in EC formation between the treatments. EC was quantified at the end of fermentation by GC/MS. In Montrachet yeast, a significant positive correlation was found between the timing of DAP addition, from early to late, and the final EC concentration m the wine (r = 0.9226). In one of the fermentations, EC levels of 30.5 ppb was foimd when DAP was added at the onset of fermentation. A twofold increase (69.5 ppb) was observed when DAP was added after 75% of the sugars were metabolized. When no DAP was added, the ethyl carbamate levels are comparable at a value of 38 ppb. In contrast, the timing of DAP additions do not affect the level EC produced by the yeast ECU 18 in this manner. The study of additional yeast strains shows that the effect of DAP addition to fermentations is strain dependent. Our results reveal the potential importance of the timing of DAP addition to grape must with respect to EC production, and the regulatory effect of DAP additions on the expression of genes in the pathway for arginine metabolism in certain wine yeast strains.

Bridging the gap between post-secondary students with disabilities and faculty members with their perceptions of access and accommodation

The purpose of this study was to identify factors related to successful university course completion for students with disAbilities including the knowledge that faculty members and students with disAbilities have about accommodation issues; the accommodations that students with disAbilities and faculty use and find effective in the university setting; faculty members' perceptions of and attitudes toward students with disAbilities; and the attitudes that students with disAbilities have toward faculty. Fiftyseven participants were involved in the research, eight students with disabilities and forty-nine faculty members. The main objective of the research was to describe how the skills, knowledge, and attitudes of students and faculty members, and organizational supports interact to support students' academic success. The utilization and effectiveness of accommodations to overcome barriers associated with disAbility in a post-secondary setting are described in relation to students' and faculty members' perceptions of academic success.