1000 resultados para diâmetro médio geométrico


Relevância:

20.00% 20.00%

Publicador:

Resumo:

A presente pesquisa teve como objetivo principal analisar a prática do Estudo Supervisionado da Escola de Referência em Ensino Médio de Timbaúba, visando verificar se há inovação pedagógica nesta prática e quais as contribuições da mesma para o processo de aprendizagem dos estudantes desta instituição de ensino. Para essa investigação utilizamos uma abordagem qualitativa, o estudo de caso etnográfico. Como procedimentos metodológicos foram utilizados registros fotográficos, entrevistas, questionários e análises de documentos. Participaram como sujeitos da pesquisa um total de 415 alunos e 12 professores. Para fundamentação teórica deste estudo, utilizamos as concepções propostas por autores de referência nas áreas de inovação pedagógica, práticas pedagógicas, aprendizagem e mudanças de paradigmas, que nos proporcionaram a discussão dos principais conceitos teóricos necessários ao desenvolvimento deste trabalho. A análise do contexto em que a prática do Estudo Supervisionado é desenvolvida, e das estratégias de aprendizagem utilizadas durante esta prática, foi realizada por meio da identificação da eficácia desta para o processo de aprendizagem dos estudantes da EREMT. Os resultados evidenciaram que a prática pedagógica desenvolvida no Estudo Supervisionado tem como principal característica inovadora a possibilidade do aluno assumir o papel de construtor ativo do seu conhecimento. As oportunidades de escolhas das atividades a serem desenvolvidas pelos aprendizes durante a realização do Estudo Supervisionado, proporciona o desenvolvimento da autonomia que favorece o enriquecimento de seu aprendizado através das ações construcionistas do aprender fazendo, que é característica importante para o ser humano na atual sociedade globalizada.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O presente estudo tem como tema a Prática Pedagógica Alfabetizadora bilíngue numa escola indígena: um estudo de caso na Escola Diferenciada de Ensino Fundamental e Médio Maria Venâncio. A pesquisa de abordagem do tipo etnográfico teve como foco central a prática pedagógica realizada no contexto da escola diferenciada e insere-se na linha de pesquisa de Inovação Pedagógica. Localizada no interior do estado do Ceará, em Itarema, na praia de Almofala, a escola pesquisada é considerada vitória da luta do povo Tremembé que ressurgiu no cenário nacional após os direitos conquistados com a Constituição Federal de 1988. Inicialmente a investigação visava observar o ensino bilíngue no âmbito da sala de aula. Porém, o mesmo não foi encontrado no universo escolhido para a pesquisa. Mesmo assim, a escola diferencia-se das escolas convencionais, rompendo com a infra-estrutura padrão, tendo uma organização docente e social únicas, onde a figura do cacique é fundamental tanto para os assuntos políticos, sociais, quanto pedagógicos. O Projeto Político Pedagógico fundamenta-se em suas tradições e práticas culturais e suas normas de conduta são os valores do povo Tremembé. Durante a observação participante, constatámos que o papel da escola vai muito além da sala de aula. A escola diferenciada é lugar de reinvenção da identidade indígena e resgate das práticas culturais que se sobrepõem ao modelo fabril, configurando uma ruptura do paradigma atual.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This research aimed at relating coordination and control forms to organizational performance. The multicase study was applied in two public high schools: Centro Federal de Educação Tecnológica do Rio Grande do Norte and Floriano Cavalcanti. In order to accomplish these objectives, it was developed a qualitative analysis and considered coordination and control forms of several authors. Also was considered Sander´s (1984) model of organizational performance. The mentioned model considers two criteria to analyze organizational performance: one instrumental (efficiency and efficacy) and other substantive (effectiveness e relevance). The research attempts to show the importance of balancing these criteria in a way that effectiveness and relevance becomes more important at schools. It was proven that the use of bureaucratic coordination forms has the power to influence the evaluation on the instrumental technique. At the same time, it was observed that the use of mechanisms based on the autonomy of the school is related to efficiency and efficacy. The object of this research can be considered successful

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In the teaching practice of architecture and urbanism in Brazil, educational legislation views modeling laboratories and workshops as an indispensable component of the infrastructure required for the good functioning of any architectural course of study. Although the development of information technology at the international level has created new possibilities for digital production of architectural models, research in this field being underway since the early 1990s, it is only from 2007 onwards that such technologies started to be incorporated into the teaching activity of architecture and urbanism in Brazil, through the pioneering experience at LAPAC/FEC/UNICAMP. It is therefore a recent experiment whose challenges can be highlighted through the following examples: (i) The implementation of digital prototyping laboratories in undergraduate courses of architecture and urbanism is still rare in Brazil; (ii) As a new developing field with few references and application to undergraduate programs, it is hard to define methodological procedures suitable for the pedagogical curricula already implemented or which have already been consolidated over the years; (iii) The new digital ways for producing tridimensional models are marked with specificities which make it difficult to fit them within the existing structures of model laboratories and workshops. Considering the above, the present thesis discusses the tridimensional model as a tool which may contribute to the development of students skills in perceiving, understanding and representing tridimensional space. Analysis is made of the relation between different forms of models and the teaching of architectural project, with emphasis on the design process. Starting from the conceptualization of the word model as it is used in architecture and urbanism, an attempt is made to identify types of tridimensional models used in the process of project conception, both through the traditional, manual way of model construction as well as through the digital ones. There is also an explanation on how new technologies for digital production of models through prototyping are being introduced in undergraduate academic programs of architecture and urbanism in Brazil, as well as a review of recent academic publications in this area. Based on the paradigm of reflective practice in teaching as designed by Schön (2000), the experiment applied in the research was undertaken in the integrated workshop courses of architectural project in the undergraduate program of architecture and urbanism at Universidade Federal do Rio Grande do Norte. Along the experiment, physical modeling, geometric modeling and digital prototyping are used in distinct moments of the design process with the purpose of observing the suitability of each model to the project s phases. The procedures used in the experiments are very close to the Action Research methodology in which the main purpose is the production of theoretical knowledge by improving the practice. The process was repeated during three consecutive semesters and reflection on the results which were achieved in each cycle helped enhancing the next one. As a result, a methodological procedure is proposed which consists of the definition of the Tridimensional Model as the integrating element for the contents studied in a specific academic period or semester. The teaching of Architectural Project as it is developed along the fifth academic period of the Architecture and Urbanism undergraduate program of UFRN is taken as a reference

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This masters thesis discusses the studying and the teaching of drama and its implications among teenagers of the contemporary world. This paper also analyses an extracurricular project entitled Drama in the development of citizenship , which was carried out in the public state school Berilo Wanderley in Natal/RN, between 1999 and 2005 with high school students. It comprises a case study that aimed at understanding how and why they chose to take drama classes outside of the school curriculum and even after they graduated, some of them never left the school project and even started participating in the cultural and artistic context of the city of Natal quite actively, both as part of an audience as well as on artistic, political, social and pedagogical performance. The project was high significant for its participants, for the school and for the community, by creating a sense of recognition of the relevance of the pedagogical and artistic production in the public school, as it managed to yield knowledge that helped students to understand the values of group work, sharing information, collaborative assessment and, most of all, to engender actions of protagonism by the teenagers themselves within their social environments. The empirical process developed is placed in a contemporary historical context where educational paradigms shifts occur, and where categories of youth empowerment and protagonism are fundamental to the educational process in the 21st century. The objective of this study is to reflect upon the pedagogical dimension of drama classes for teenagers, aiming at providing further discussions on the role of acting classes in the construction of the personality among youngsters, thus hoping to contribute to other teaching practices, including drama and other subjects of general education

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work a studied the high energy milling effect in microstructure and magnetic properties of the WC-10wt.%Co composite. The composite powders were prepared by mechanical mixed and milled at 2 hours, 100 hours, 200 hours and 300 hours in planetary milling. After this process the composite were compacted in stainless steel die with cylindrical county of 10 mm of diameter, at pressure 200 Mpa and sintered in a resistive furnace in argon atmosphere at 1400 oC for 5 min. The sintered composite were cutted, inlaid, sandpapered, and polished. The microestrutural parameters of the composite was analyzed by X-ray diffraction, scanning electronic microscopy, optical microscopy, hardness, magnetic propriety and Rietveld method analyze. The results shows, with milling time increase the particle size decrease, it possibility minor temperature of sintering. The increase of milling time caused allotropic transformation in cobalt phase and cold welding between particles. The cold welding caused the formation of the particle composite. The X-ray diffraction pattern of composite powders shows the WC peaks intensity decrease with the milling time increase. The X-ray diffraction pattern of the composite sintered samples shows the other phases. The magnetic measurements detected a significant increase in the coercitive field and a decrease in the saturation magnetization with milling time increase. The increase coercitive field it was also verified with decrease grain size with milling time increase. For the composite powders the increase coercitive field it was verified with particle size reduction and saturation magnetization variation is relate with the variation of free cobalt. The Rietveld method analyze shows at milling time increase the mean crystalline size of WC, and Co-cfc phases in composite sintered sample are higher than in composite powders. The mean crystallite size of Co-hc phase in composite powders is higher than in composite sintered sample. The mean lattice strains of WC, Co-hc and Co-cfc phases in composite powders are higher than in composite sintered samples. The cells parameters of the composite powder decrease at milling time increase this effect came from the particle size reduction at milling time increase. In sintered composite the cells parameters is constant with milling time increase

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Aiming to reduce and reuse waste oil from oily sludge generated in large volumes by the oil industry, types of nanostructured materials Al-MCM-41 and Al-SBA-15, with ratios of Si / Al = 50, were synthesized , and calcined solids used as catalysts in the degradation of oily sludge thermocatalytic oil from oilfield Canto do Amaro, in the state of Rio Grande do Norte. Samples of nanostructured materials were characterized by thermogravimetric analysis (TG / DTG), X-ray diffraction (XRD), scanning electron microscopy (SEM), absorption spectroscopy in the infrared Fourier transform (FT-IR) and adsorption nitrogen (BET). The characterization showed that the synthesized materials resulted in a catalyst nanostructure, and ordered pore diameter and surface area according to existing literature. The oily sludge sample was characterized by determining the API gravity and sulfur content and SARA analysis (saturates, aromatics, resins and asphaltenes). The results showed a material equivalent to the average oil with API gravity of 26.1, a low sulfur content and considerable amount of resins and asphaltenes, presented above in the literature. The thermal and catalytic degradation of the oily sludge oil was performed from room temperature to 870 ° C in the ratios of heating of 5, 10 and 20 ° C min-1. The curves generated by TG / DTG showed a more accelerated degradation of oily sludge when it introduced the nanostructured materials. These results were confirmed by activation energy calculated by the method of Flynn-Wall, in the presence of catalysts reduced energy, in particular in the range of cracking, showing the process efficiency, mainly for extraction of lightweight materials of composition of oily sludge, such as diesel and gasoline

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Food habits and morpho-histology of the digestive tract of marbled swamp eel, Synbranchus marmoratus (Block, 1917) were investigated. The fish samples were captured during August, 2007 to July, 2008 in the Marechal Dutra reservoir, Acari, Rio Grande do Norte. The rain fall data was obtained from EMPARN. The fish captured, were measured, weighed, dissected, eviscerated and individual stomach weights were registered. The stomach contents analyses were carried out based on volumetric method, points, frequency of occurrence and applying the Index of Relative Importance. The degrees of repletion of the stomachs were determined besides the Index of Repletion relating to feeding activity variations and frequency of ingestion during the rainy and dry seasons. The rainfall varied from 0 mm a 335 mm with a mean value of 71.62 mm. Highest rainfall of 335.5 mm was registered in March, 2008 and August to December was the dry period. During the dry period the study species presented high degrees of repletion of the stomachs, with a peak value in the month of September (mean = 4.54; ± SD = 0.56). The minimum mean value of = 3.99 ± SD = 0.25 was registered in the month of May during the rainy period. The stomach contents of S. marmoratus registered show that this fish prefers animals, 78.22% of crustaceans 2.85% of mollusks, 3.25% of fish, 1.4% of insects and 13.5% of semi-digested organic matter, thus characterizing the study species as a carnivore with a preference for crustaceans. The morpho-histological aspects of the digestive tract of S. marmoratus indicate that the mouth is terminal adapted to open widely, thin lips with taste buds, small villiform teeth forming a single series on maxillas, four pairs of branchial arches with short and widely spaced branchial rays. The oesophagus is short and cylindrical with a small diameter. The oesophagus wall is thick with mucas surface and internal parallel folds. The stomach is retilinical in form, presenting cardiac, caecal and pyloric portions. The caecal portion is long and is intermediary in position between the cardiac and pyloric portions. The cardiac portion of the stomach is short and cylindrical formed of simple epithelial cylindrical mucus cells. The caecal portion is long with narrow walls, a big cavity and smaller folds which give rise to gastric glands. The phyloric portion has no glands and primary or secondary mucas folds. The morphohistological aspects of the digestive tract of S. marmoratus indicate its adaptation to a carnivorous feeding habit

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A cutia (Dasyprocta aguti) é um roedor silvestre encontrado amplamente na região Nordeste do Brasil. É uma espécie muito utilizada pela população humana de baixa renda como fonte alternativa de proteína na alimentação. Foram utilizadas 31 cutias, machos, provenientes da Universidade Federal do Piauí (FUFPI), Estado do Piauí e da Escola Superior de Agricultura de Mossoró Estado do Rio Grande do Norte. Os animais foram divididos em grupos etários desde o nascimento até os 14 meses de idade. O diâmetro nuclear médio foi obtido pela medida de 10 núcleos do tipo celular estudado em cada testículo, no estágio 1 do ciclo do epitélio seminífero. Nos animais que não apresentaram o epitélio organizado em estágios bem definidos em virtude da idade, foram feitas medidas em secções transversais escolhidas somente pelo contorno circular. O início da assincronia do processo espermatogênico foi observado a partir dos seis meses de idade. A puberdade, na cutia Dasyprocta aguti, foi definitivamente estabelecida a partir dos nove meses de idade, pois estavam presentes todos os tipos celulares e espermatozóides liberados no lume tubular em grande parte do parênquima testicular.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The topical corneal application of antimitotic mitomycin-C (MMC) during refractive surgery is still characterized by a lack of standardization and considerable empirism. For this reason the creation of a system capable of reliable drug delivery represents a beneficial innovation for patients submitted to these procedures. Objective: Elaborate a new MMC delivery system during the transoperatory period of photorefractive keratectomy (PRK) followed by patent application. Methods: The project consists of an in vitro experimental study to create an MMC (0.02%) release system. The drug was impregnated in sterile Whatman® 41 paper filter discs with a diameter of 8 mm. After drying, the discs were applied to antibiogram plates seeded with Staphylococcus epidermidis (American Type Culture Collection ATCC 12228), followed by the addition of a drop of sterile water. At the end of 1 minute, the discs were removed and the plates incubated for 48 hours at 35oC. Mean drop volume in the collyrium flasks was measured using analytical balance weighing. The inhibition halo (mm) was correlated with the MMC impregnated into the disc. After completion of the invention design a patent application was lodged at the National Institute of Industrial Property. Results: The correspondence between MMC-produced inhibition halos indicated that a dose of 16μg was ideal for impregnating into the discs. The mean drop volume obtained from the collyrium flasks was 37.7 μL. A minute after the application of one drop of balanced saline solution, the system released an adequate concentration for PRK surgery. Conclusion: A new MMC delivery system was created for transoperatory application in photorefractive keratectomy (PRK). Publication of the patent application (number PI 0704739-8) gives the authors exclusive intellectual property rights. The study was sponsored by Ophthalmos Indústria e Comércio de Produtos Farmacêuticos S.A. (São Paulo-SP, Brazil) and received the indispensable scientific contribution of researchers from the fields of Pharmacy, Medicine, Biology, Statistics and Law, characterizing the work as multidisciplinary, in accordance with norms established by the Postgraduate Health Sciences Program of the Federal University of Rio Grande do Norte (UFRN)