On the dynamic behaviour of a mass supported by a parallel combination of a spring and an elastically connected damper

This paper presents a consistent and concise analysis of the free and forced vibration of a mass supported by a parallel combination of a spring and an elastically supported damper (a Zener model). The results are presented in a compact form and the physical behaviour of the system is emphasised. This system is very similar to the conventional single-degree-of freedom system (sdof)-(Voigt model), but the dynamics can be quite different depending on the system parameters. The usefulness of the additional spring in series with the damper is investigated, and optimum damping values for the system subject to different types of excitation are determined and compared.There are three roots to the characteristic equation for the Zener model; two are complex conjugates and the third is purely real. It is shown that it is not possible to achieve critical damping of the complex roots unless the additional stiffness is at least eight times that of the main spring. For a harmonically excited system, there are some possible advantages in using the additional spring when the transmitted force to the base is of interest, but when the displacement response of the system is of interest then the benefits are marginal. It is shown that the additional spring affords no advantages when the system is excited by white noise. (c) 2007 Elsevier Ltd. All rights reserved.

Proteção constitucional do consumidor no âmbito da regulação publicitária

The concern with issues related to consumer protection has emerged in North America and then spread throughout the world. In Brazil, consumer‟s rights and interests only gained greater importance after their consolidation in the Constitution of 1988 and the enactment of the 8078/90 Law (Consumer‟s Protection and Defense Code), which established the consumerist microsystem. The understanding of the legal relationship of consumption concept is necessarily connected to knowledge of the elements that compose it. Among these, we can find the consumer and the provider (subjective elements), the product or service (objective elements), and the consumer‟s condition as final receiver of the consumption object (finalistic element). In order to elucidate the configuration of consumer protection before advertising communication, this work will analyze the advertising through the prism of consumerist laws, conceptualizing it and presenting a differentiation of it in relation to practices such as marketing, offer and commercial communication as well as examining its several kinds of manifestation, focusing mainly the ones categorized as misleading or unfair advertising. All kinds of advertising communication against the consumerist microsystem are subject to judicial control exercised by the State. Besides individual protection possibilities, this state-owned control can be collectively exercised as a result of the utilization of public civil action and popular action. Some specific categories of advertising (smoking products, alcoholic beverages, pesticides, medicines and therapies) are still subject to a set of particular restraints provided by the 9294/96 Law, which enables the performance of a special control in relation to them. In addition to state control, there is also a system of advertising communication self-regulation, which develops itself through the actions of the National Council of Advertising Self-Regulation that are based mainly on the laws established by the Brazilian Code of Advertising Self-Regulation and its annexes. However, this system of advertising self-regulation still has some deficiencies that hinder its effectiveness

Identification of Staphylococcus saprophyticus isolated from patients with urinary tract infection using a simple set of biochemical tests correlating with 16S-23S interspace region molecular weight patterns

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of the Connector and Implant Design on the Implant-Tooth-Connected Prostheses

Purpose:The purpose of this study was to evaluate stress transfer patterns between implant-tooth-connected prostheses comparing rigid and semirigid connectors and internal and external hexagon implants.Materials and Methods:Two models were made of photoelastic resin PL-2, with an internal hexagon implant of 4.00 x 13 mm and another with an external hexagon implant of 4.00 x 13 mm. Three denture designs were fabricated for each implant model, incorporating one type of connection in each one to connect implants and teeth: 1) welded rigid connection; 2) semirigid connection; and 3) rigid connection with occlusal screw. The models were placed in the polariscope, and 100-N axial forces were applied on fixed points on the occlusal surface of the dentures.Results:There was a trend toward less intensity in the stresses on the semirigid connection and solid rigid connection in the model with the external hexagon; among the three types of connections in the model with the internal hexagon implant, the semirigid connection was the most unfavorable one; in the tooth-implant association, it is preferable to use the external hexagon implant.Conclusions:The internal hexagon implant establishes a greater depth of hexagon retention and an increase in the level of denture stability in comparison with the implant with the external hexagon. However, this greater stability of the internal hexagon generated greater stresses in the abutment structures. Therefore, when this association is necessary, it is preferable to use the external hexagon implant.

Comparison of Single-Standing or Connected Implants on Stress Distribution in Bone of Mandibular Overdentures: A Two-Dimensional Finite Element Analysis

This study aimed to compare the influence of single-standing or connected implants on stress distribution in bone of mandibular overdentures by means of two-dimensional finite element analysis. Two finite element models were designed using software (ANSYS) for 2 situations: bar-clip (BC) group-model of an edentulous mandible supporting an overdenture over 2 connected implants with BC system, and o'ring (OR) group-model of an edentulous mandible supporting an overdenture over 2 single-standing implants with OR abutments. Axial loads (100 N) were applied on either central (L1) or lateral (L2) regions of the models. Stress distribution was concentrated mostly in the cortical bone surrounding the implants. When comparing the groups, BC (L1, 52.0 MPa and L2, 74.2 MPa) showed lower first principal stress values on supporting tissue than OR (L1, 78.4 MPa and L2, 76.7 MPa). Connected implants with BC attachment were more favorable on stress distribution over peri-implant-supporting tissue for both loading conditions.

A set of polymorphic microsatellite loci for Vriesea gigantea and Alcantarea imperialis (Bromeliaceae) and cross-amplification in other bromeliad species

Fifteen polymorphic microsatellite markers were isolated and characterized in two species of Bromeliaceae: Vriesea gigantea and Alcantarea imperialis. The number of alleles observed for each locus ranged from three to 16. The loci will be used for studies of the genetic structure of natural populations, reproductive biology, and evolutionary relationships among and within these genera. A cross-amplification test in 22 taxa suggests that the markers will be useful for similar applications in numerous other bromeliad species.

Gene flow networks among American Aedes aegypti populations

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

New primers for the amplification and sequencing of nuclear loci in a taxonomically wide set of reptiles and amphibians

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

On the spectrum of stochastic perturbations of the shift and Julia sets

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

EIGENVALUES of FIBONACCI STOCHASTIC ADDING MACHINE

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of self-, chase and mixed self/cross-pollinations on pistil longevity and fruit set in Ceiba species (Bombacaceae) with late-acting self-incompatibility

Background and aims Late-acting self-incompatibility (LSI). in which selfed flowers fail to form fruits despite apparently successful growth of the pollen tubes to the ovules, is a contentious and still poorly understood phenomenon. Some studies have indicated pollen tube-pistil interactions, and major gene control. Others favour an early acting inbreeding depression explanation.Methods Experimental pollinations, including selfs (in a subsample of which the style was cut before pollen tubes reached the ovary), chase self/cross-pollinations, crosses, and mixed self/cross-pollinations were used to study floral/pistil longevity and effect on fruit set and seed yield in two Ceiba species known to have LSI.Results Self-pollinations, including those with a cut style, had extended floral longevity compared with unpollinated flowers. Chase pollinations in which cross-pollen was applied up to 3 h after selfing set fruits, but with reduced seed set compared with crosses. Those with cross-pollen applied at 4 and 8 h after self-pollination all failed to set fruits. Flowers subjected to 1 : 1 and 2 : 1 self/cross-pollinations all produced fruits but again with a significantly lower seed set compared with crosses.Conclusions Extended floral longevity initiated with self-pollen tubes growing in the style indicates some kind of pollen tube-pistil interaction. Fruit set only in chase pollinations up to 3 h implies that self-pollen tubes either grow more slowly in the style or penetrate ovules more slowly on arrival at the ovary compared with cross-tubes. This agrees with previous observations indicating that the incidence of penetrated ovules is initially lower in selfed compared with crossed pistils. However, the low seed yield from mixed pollinations indicates that self- and cross-pollen tubes arrive at the ovary and penetrate ovules more or less simultaneously. Possible explanations for these discordant results are discussed. (C) 2004 Annals of Botany Company.

Casimir energy in a small volume multiply connected static hyperbolic preinflationary universe

A few years ago, Cornish, Spergel and Starkman (CSS) suggested that a multiply connected small universe could allow for classical chaotic mixing as a preinflationary homogenization process. The smaller the volume, the more important the process. Also, a smaller universe has a greater probability of being spontaneously created. Previously DeWitt, Hart and Isham (DHI) calculated the Casimir energy for static multiply connected fat space-times. Because of the interest in small volume hyperbolic universes (e.g., CSS), we generalize the DHI calculation by making a numerical investigation of the Casimir energy for a conformally coupled, massive scalar field in a static universe, whose spatial sections are the Weeks manifold, the smallest universe of negative curvature known. In spite of being a numerical calculation, our result is in fact exact. It is shown that there is spontaneous vacuum excitation of low multipolar components.

Casimir energy in multiply connected static hyperbolic universes

We generalize a previously obtained result for the case of a few other static hyperbolic universes with manifolds of nontrivial topology as spatial sections.

Usando um voltímetro para medir tempo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ambientes educativos e conhecimento social: um estudo sobre as representações de escola

Este artigo apresenta parte de uma pesquisa sobre a construção do conhecimento social fundamentada na teoria piagetiana. Os dados analisados referem-se às ideias de crianças entre 7 e 8 anos a respeito da escola. Os sujeitos foram alunos de duas classes de primeira série: uma considerada ambiente tradicional e a outra considerada ambiente sócio-moral construtivista. Os dados obtidos sofreram análise qualitativa e quantitativa e as respostas dos sujeitos foram comparadas, com a finalidade de descobrir possíveis diferenças naquilo que as crianças pensam em função do ambiente escolar do qual participam. Os resultados demonstraram que as crianças não possuem compreensão real da função da escola e que houve diferença significativa em função do ambiente escolar pesquisado, especificamente em relação à compreensão que os sujeitos apresentam das razões para a existência de uma escola e das caracterizações de uma escola boa e uma escola ruim. Dessa forma, as crianças inseridas no ambiente tradicional consideram que para a existência de uma escola é necessário somente aspectos materiais; já aquelas inseridas no ambiente sócio-moral construtivista consideram a necessidade de outros elementos, tais como as pessoas. As crianças inseridas no ambiente considerado construtivista também apontam aspectos subjetivos e referentes a comportamentos considerados adequados para a caracterização de uma boa escola, o que não ocorre com os alunos do ambiente tradicional.