Toxoplasma gondii in semen of experimentally infected swine

Eight reproductive boars were divided into three groups and inoculated with Toxoplasma gondii [GI (n=3) 1.5x10(4) oocysts strain P; GII (n=3) 1.0x10(6) tachyzoites strain RH; and GIII (n=2) non-inoculated control]. Clinical, hematological, parasitemia and serological tests and studies of the parasite in the semen through bioassay and PCR, and in reproductive organs (Bioassay and immunohistochemical analyses) were conducted to evaluate the toxoplasmic infection. Blood and semen were collected on day -2, -1, 1, 3, 5, 7, 9, 11, 14 and weekly up to 84 days post-inoculation (DPI). No clinical or hematimetric alteration was observed in the boars. Parasitemia was detected in one boar inoculated with oocysts at the 7th DPI and in another boar infected with tachyzoites (GII) at the 3rd and 49th DPI. Serological tests revealed antibodies against T. gondii in animals inoculated with oocysts or tachyzoites at the 7th DPI with dilutions of 1:256 and 1:64, which reached peaks of 1:4096 at day 11 and 9, respectively. The bioassays revealed the presence of the parasite in semen samples of a boar inoculated with oocysts (GI) at 3, 49 and 56 DPI and from two boars infected with tachyzoites (GII), one animal at 5 and two animals at 49 days DPI. Mice inoculated with semen from the control group (GIII) remained serologically negative. PCR analysis showed T. gondii DNA in the semen of Boar 1 and Boar 3 inoculated with tachyzoites and oocysts, respectively. The immuno-histochemical tests showed T. gondii in the reproductive organs of Boar 1 and Boar 2, inoculated with tachyzoites and oocysts, respectively. These findings suggest the possible occurrence of venereal transmission of T. gondii in swine.

Technological development of 40mg furosemide tablets: equivalence and bioavaibility study in dogs

Furosemide (40mg) was administered to 20 street dogs, 10 males and 10 females, in two different pharmaceutical forms: (1) compressed furosemide 40mg formulated at the Federal University of Pernambuco (UFPE-tablet), and (2) a commercial formulation with equal bioequivalence produced by the Laboratory for Pharmaceutical Technology of Pernambuco State (LAFEPE), the LAFEPE-furosemide. The study aimed to evaluate the kinetics of dissolution of the UFPE-tablet in order to analyze the behavior of bioavailability of the best formulation for veterinary use. The plasmatic concentrations of furosemide for the determination of parameters of pharmacological kinetics were analyzed by high-performance liquid chromatographic method (HPLC). The in vitro study accomplished through physiochemical analyses demonstrated that the formulas of the furosemide tablets attained the pharmaceutical requirements in agreement with USP 23 and the Brazilian Pharmacopoeia. The evaluation accomplished in dogs with UFPE-tablets given in only dose demonstrated uniformity in blood levels indicating stability in maintenance of the pharmaceutical formulation and efficiency in absorption of the active compound. These values are not significantly different in relation to the 5% confidence limit. Regarding maximum concentration (Tmax) time and global bioavaibility assessed by AUC means, there were no considerable differences as well. UFPE-furosemide displayed 743.492µg/mL.h as AUC average value whereas LAFEPE-furosemide had an average of 537.284µg/mL.h.

Toxoplasma gondii in experimentally infected Bos taurus and Bos indicus semen and tissues

Eighteen young steers were inoculated with Toxoplasma gondii and randomly distributed into three groups of six animals each: GI, 2.5x10(5) "P" strain oocysts, GII, 5.0x10(6) "RH" strain tachyzoites, and GIII (Control). Clinical, serological and parasitemia exams were realized. Parasite investigation by bioassay and PCR was realized on semen and fragments of skeletal musculature, lymph nodes, brain, retina, spleen, liver, lung, testicle, epididymis and seminal vesicle. Blood and semen samples were collected on days -2, -1, 1, 3, 5, 7, 14 and weekly thereafter, up to postinfection day (PID) 84. The inoculated steers (GI and GII) presented hyperthermia from PID 3 to 16. Antibodies against T. gondii were detected through the indirect fluorescence antibody test (IFAT) on PID 5 (1:16) in both inoculated groups (oocysts and tachyzoites), reaching peaks of 1:4096 on PID 7. Parasitemia outbursts occurred in all infected bovines, principally from PID 7 to 28, independent of the strain and inoculate used. Bioassays revealed the presence of parasites in semen samples of animals infected with oocysts (GI) and tachyzoites (GII) on several experimental days between PID 7 and 84. Tissue parasitism by T. gondii was diagnosed by bioassay and the PCR technique in several organ and tissue fragments. These findings suggest the possibility of sexual transmission of T. gondii in the bovine species.

Lignoselluloosapohjaisten väkevähappohydrolysaattien jatkuvatoiminen kromatografinen fraktiointi

Työssä tutkittiin lignoselluloosapohjaisten väkevähappohydrolysaattien (monosakkaridit, rikki- ja etikkahppo) jatkuvatoimista kromatografista fraktiointia käyttäen Japan Organo SMB -prosessia. Adsorbenttinä toimi happomuotoinen (H+) vahva kationinvaihtohartsi. Panostoimista fraktiointia käytettiin vertailukohtana. Jatkuvatoimisen prosessin optimoinnilla saavutettiin monosakkaridien suurimmaksi tuottavuudeksi 283 mol/(m3 h) (panosprosessille 145 mol/(m3 h). JO-prosessilla saavutettiin korkeat rikki- ja etikkahapon saannot: 97,3 % ja 93,5 %. Monosakkaridisaanto jäi hieman alhaisemmaksi (61,7 %) johtuen monosakkaridi- ja rikkihappo-profiilien hankalasta erottamisesta. Ulostulo virtojen puhtaudet olivat korkeat: 89 % monosakkarideille, 89 % rikkihapolle ja 100 % etikkahapolle.

Classification of antimicrobial resistance using artificial neural networks and the relationship of 38 genes associated with the virulence of Escherichia coli isolates from broilers

Avian pathogenic Escherichia coli (APEC) is responsible for various pathological processes in birds and is considered as one of the principal causes of morbidity and mortality, associated with economic losses to the poultry industry. The objective of this study was to demonstrate that it is possible to predict antimicrobial resistance of 256 samples (APEC) using 38 different genes responsible for virulence factors, through a computer program of artificial neural networks (ANNs). A second target was to find the relationship between (PI) pathogenicity index and resistance to 14 antibiotics by statistical analysis. The results showed that the RNAs were able to make the correct classification of the behavior of APEC samples with a range from 74.22 to 98.44%, and make it possible to predict antimicrobial resistance. The statistical analysis to assess the relationship between the pathogenic index (PI) and resistance against 14 antibiotics showed that these variables are independent, i.e. peaks in PI can happen without changing the antimicrobial resistance, or the opposite, changing the antimicrobial resistance without a change in PI.

Vibration analysis for Bearing outer race condition diagnostics

This paper investigates defect detection methodologies for rolling element bearings through vibration analysis. Specifically, the utility of a new signal processing scheme combining the High Frequency Resonance Technique (HFRT) and Adaptive Line Enhancer (ALE) is investigated. The accelerometer is used to acquire data for this analysis, and experimental results have been obtained for outer race defects. Results show the potential effectiveness of the signal processing technique to determine both the severity and location of a defect. The HFRT utilizes the fact that much of the energy resulting from a defect impact manifests itself in the higher resonant frequencies of a system. Demodulation of these frequency bands through use of the envelope technique is then employed to gain further insight into the nature of the defect while further increasing the signal to noise ratio. If periodic, the defect frequency is then present in the spectra of the enveloped signal. The ALE is used to enhance the envelope spectrum by reducing the broadband noise. It provides an enhanced envelope spectrum with clear peaks at the harmonics of a characteristic defect frequency. It is implemented by using a delayed version of the signal and the signal itself to decorrelate the wideband noise. This noise is then rejected by the adaptive filter that is based upon the periodic information in the signal. Results have been obtained for outer race defects. They show the effectiveness of the methodology to determine both the severity and location of a defect. In two instances, a linear relationship between signal characteristics and defect size is indicated.

Fracture modes and acoustic emission characteristics of hydrogen-assisted cracking in high-strength low-alloy steel weldment

The aim of the present paper is to study the relationship between the fracture modes in hydrogen-assisted cracking (HAC) in microalloied steel and the emission of acoustic signals during the fracturing process. For this reason, a flux-cored arc weld (FCAW) was used in a high-strength low-alloy steel. The consumable used were the commercially available AWS E120T5-K4 and had a diameter of 1.6 mm. Two different shielding gases were used (CO2 and CO2+5% H2) to obtain complete phenomenon characterization. The implant test was applied with three levels of restriction stresses. An acoustic emission measurement system (AEMS) was coupled to the implant test apparatus. The output signal from the acoustic emission sensor was passed through an electronic amplifier and processed by a root mean square (RMS) voltage converter. Fracture surfaces were examined by scanning electron microscopy (SEM) and image analysis. Fracture modes were related with the intensity, the energy and the number of the peaks of the acoustic emission signal. The shielding gas CO2+5% H2 proved to be very useful in the experiments. Basically, three different fracture modes were identified in terms of fracture appearance: microvoid coalescence (MVC), intergranular (IG) and quasi-cleavage (QC). The results show that each mode of fracture presents a characteristic acoustic signal.

Hartsin likaantuminen ja kestävyys mustalipeän fraktioinnissa kokoekskluusiokromatografialla

Sellunkeiton sivutuotteena syntyvä mustalipeä sisältää arvokkaita orgaanisia yhdisteitä, kuten hydroksihappoja. Toistaiseksi hydroksihapot on käytetty muun mustalipeän tavoin sellutehtaan lämmöntuotantoon. Hydroksihappojen merkitys lämmöntuotannon kannalta on kuitenkin pieni verrattuna mustalipeän sisältämään ligniiniin. Viime vuosina kiinnostus hydroksihappoja kohtaan on kasvanut sillä ne voisivat toimia lähtöaineena monille kemikaaleille, joiden valmistukseen käytetään perinteisesti fossiilisia polttoaineita. Hydroksihappoja voidaan erottaa mustalipeästä useilla eri menetelmillä. Erotukseen soveltuvia menetelmiä ovat esimerkiksi ioniekskluusiokromatografia, kalvosuodatus ja kiteytys sekä kokoekskluusiokromatografia. Kromatografisissa menetelmissä käytetyt hartsit ja kalvosuodatuksessa käytettävät kalvot ovat kuitenkin alttiita eri yhdisteiden aiheuttamalle likaantumiselle. Tämän työn kirjallisuusosassa käsitellään mustalipeän koostumusta sekä mustalipeän sisältämiä hydroksihappoja ja niiden käyttökohteita. Lisäksi kirjallisessa osassa on kuvattu aikaisemmin tutkittuja menetelmiä hydroksihappojen erottamiseksi mustalipeästä. Viimeisin menetelmä mustalipeän fraktioimiseksi on kokoekskluusiokromatografia. Työssä on kuvattu kokoeksluusiokromatografian periaate ja selvitetty menetelmän soveltuvuutta mustalipeän fraktiointiin. Lisäksi on käsitelty kromatografisissa menetelmissä käytettyjen hartsien likaantumista, likaantumisen vaikutusta erotustehokkuuteen ja likaantumisen ehkäisyä. Kokeellisessa osassa käsitellään hydroksihappojen erotusta mustalipeästä kokoekskluusiokromatografialla sekä kokoekskluusiokromatografiassa käytettävän hartsin likaantumista ja kestävyyttä. Työssä selvitettiin toistokokein likaantumisen vaikutusta hartsin erotuskykyyn käsitellyn mustalipeän määrän kasvaessa. Malliaineena käytettiin ultrasuodatettua soodakeitettyä mustalipeää. Tulosten perusteella hartsin likaantuminen ei vaikuttanut hydroksihappojen erotukseen mustalipeästä. Kestävyyskokeissa hartsin vesiretentiossa ei havaittu mittausten perusteella johdonmukaista muutosta. HPLC-analyysien perusteella huomattiin liuoksista kuitenkin mahdollisia hartsin hajoamistuotteita, joita ei kuitenkaan pystytty tunnistamaan.

Ion mobility spectrometry in liquid analysis

Ion mobility spectrometry (IMS) is a straightforward, low cost method for fast and sensitive determination of organic and inorganic analytes. Originally this portable technique was applied to the determination of gas phase compounds in security and military use. Nowadays, IMS has received increasing attention in environmental and biological analysis, and in food quality determination. This thesis consists of literature review of suitable sample preparation and introduction methods for liquid matrices applicable to IMS from its early development stages to date. Thermal desorption, solid phase microextraction (SPME) and membrane extraction were examined in experimental investigations of hazardous aquatic pollutants and potential pollutants. Also the effect of different natural waters on the extraction efficiency was studied, and the utilised IMS data processing methods are discussed. Parameters such as extraction and desorption temperatures, extraction time, SPME fibre depth, SPME fibre type and salt addition were examined for the studied sample preparation and introduction methods. The observed critical parameters were extracting material and temperature. The extraction methods showed time and cost effectiveness because sampling could be performed in single step procedures and from different natural water matrices within a few minutes. Based on these experimental and theoretical studies, the most suitable method to test in the automated monitoring system is membrane extraction. In future an IMS based early warning system for monitoring water pollutants could ensure the safe supply of drinking water. IMS can also be utilised for monitoring natural waters in cases of environmental leakage or chemical accidents. When combined with sophisticated sample introduction methods, IMS possesses the potential for both on-line and on-site identification of analytes in different water matrices.

Switchable Lanthanide Luminescence for Detection of Biomolecules

Binary probes are oligonucleotide probe pairs that hybridize adjacently to a complementary target nucleic acid. In order to detect this hybridization, the two probes can be modified with, for example, fluorescent molecules, chemically reactive groups or nucleic acid enzymes. The benefit of this kind of binary probe based approach is that the hybridization elicits a detectable signal which is distinguishable from background noise even though unbound probes are not removed by washing before measurement. In addition, the requirement of two simultaneous binding events increases specificity. Similarly to binary oligonucleotide probes, also certain enzymes and fluorescent proteins can be divided into two parts and used in separation-free assays. Split enzyme and fluorescent protein reporters have practical applications among others as tools to investigate protein-protein interactions within living cells. In this study, a novel label technology, switchable lanthanide luminescence, was introduced and used successfully in model assays for nucleic acid and protein detection. This label technology is based on a luminescent lanthanide chelate divided into two inherently non-luminescent moieties, an ion carrier chelate and a light harvesting antenna ligand. These form a highly luminescent complex when brought into close proximity; i.e., the label moieties switch from a dark state to a luminescent state. This kind of mixed lanthanide complex has the same beneficial photophysical properties as the more typical lanthanide chelates and cryptates - sharp emission peaks, long emission lifetime enabling time-resolved measurement, and large Stokes’ shift, which minimize the background signal. Furthermore, the switchable lanthanide luminescence technique enables a homogeneous assay set-up. Here, switchable lanthanide luminescence label technology was first applied to sensitive, homogeneous, single-target nucleic acid and protein assays with picomolar detection limits and high signal to background ratios. Thereafter, a homogeneous four-plex nucleic acid array-based assay was developed. Finally, the label technology was shown to be effective in discrimination of single nucleotide mismatched targets from fully matched targets and the luminescent complex formation was analyzed more thoroughly. In conclusion, this study demonstrates that the switchable lanthanide luminescencebased label technology can be used in various homogeneous bioanalytical assays.

Microwave-assisted solvent extraction and analysis of shikimic acid from plant tissues

A better method for determination of shikimate in plant tissues is needed to monitor exposure of plants to the herbicide glyphosate [N-(phosphonomethyl)glycine] and to screen the plant kingdom for high levels of this valuable phytochemical precursor to the pharmaceutical oseltamivir. A simple, rapid, and efficient method using microwave-assisted extraction (MWAE) with water as the extraction solvent was developed for the determination of shikimic acid in plant tissues. High performance liquid chromatography was used for the separation of shikimic acid, and chromatographic data were acquired using photodiode array detection. This MWAE technique was successful in recovering shikimic acid from a series of fortified plant tissues at more than 90% efficiency with an interference-free chromatogram. This allowed the use of lower amounts of reagents and organic solvents, reducing the use of toxic and/or hazardous chemicals, as compared to currently used methodologies. The method was used to determine the level of endogenous shikimic acid in several species of Brachiaria and sugarcane (Saccharum officinarum) and on B. decumbens and soybean (Glycine max) after treatment with glyphosate. The method was sensitive, rapid and reliable in all cases.

Effects of Corynespora cassiicola on Lantana camara

The present study combines the examination of toxins produced by C. cassiicola and the effects of the fungus colonization on L. camara. C. cassiicola was cultivated on solid media and the crude extracts CAE and CE were produced. Both extracts were submitted to a seed germination and growth assay utilizing Physalis ixocarpa, Trifolium alexandrinum, Lolium multiflorum and Amaranthus hypochodriacus. The effect of the extracts on the ATP-synthesis in isolated spinach chloroplasts was also tested. Bioassay guided chromatographic fractionation identified the most active extract (CAE). From this extract ergosta-4,6,8(14),22-tetraen-3-one (C1) and fatty acids were isolated. The C1 compound reduce ATP synthesis in isolated spinach chloroplasts. The interference of fatty acids with ATP synthesis and also with weed growth provides one explanation of the phytogrowth-inhibitory properties of such fungal extracts. Histological observations involving fungus-plant interaction were made on L. camara plants inoculated with C. cassiicola conidia suspension. After inoculations, fragments of the leaf blades were prepared for observation by light and scanning electron microscopy. Fungal colonization of Lantana camara was typical of a necrotroph and penetration initiated a hypersensitive response. L. camara reacted to the pathogen penetration through thickening of the epidermis walls, cytoplasm granulation and a cicatrisation tissue.