994 resultados para Total correlations
Resumo:
Diferentes sistemas solventes foram aplicados para determinar a eficiência de extração de compostos com capacidade antioxidante em bagaço de uva, importante subproduto do processo de vinificação. Realizou-se a quantificação de compostos fenólicos totais, antocianinas totais e atividade antioxidante nos extratos de bagaço de uva Vitis vinifera das variedades Tannat e Ancelota, provenientes da região de Videira, Santa Catarina. A atividade antioxidante foi determinada pelos métodos ABTS, FRAP e β-caroteno/ácido linoléico. Conteúdos de compostos fenólicos totais em acetona 50 e 70% foram maiores nas duas variedades, enquanto que os conteúdos de antocianinas totais extraídos em ambas as variedades foram maiores no solvente etanol em concentrações de 50 e 70%. Pelo método ABTS, a atividade antioxidante foi maior nas concentrações de 50 e 70% de acetona para a variedade Tannat e 50 e 70% de acetona e etanol para a variedade Ancelota. Em relação ao poder redutor pelo método FRAP, este foi maior em solvente acetona 70% para as duas variedades. No ensaio do poder de inibição da oxidação, a adição de 100 e 200 µL de extratos etanólicos a 50% das variedades Tannat e Ancelota apresentou maior eficiência, sendo quase duas vezes superior aos extratos acetônicos testados.
Resumo:
The Graphite furnace atomic absorption spectrometry (GF AAS) was the technique chosen by the inorganic contamination laboratory (INCQ/ FIOCRUZ) to be validated and applied in routine analysis for arsenic detection and quantification. The selectivity, linearity, sensibility, detection, and quantification limits besides accuracy and precision parameters were studied and optimized under Stabilized Temperature Platform Furnace (STPF) conditions. The limit of detection obtained was 0.13 µg.L-1 and the limit of quantification was 1.04 µg.L-1, with an average precision, for total arsenic, less than 15% and an accuracy of 96%. To quantify the chemical species As(III) and As(V), an ion-exchange resin (Dowex 1X8, Cl- form) was used and the physical-chemical parameters were optimized resulting in a recuperation of 98% of As(III) and of 90% of As(V). The method was applied to groundwater, mineral water, and hemodialysis purified water samples. All results obtained were lower than the maximum limit values established by the legal Brazilian regulations, in effect, 50, 10, and 5 µg.L-1 para As total, As(III) e As(V), respectively. All results were statistically evaluated.
Resumo:
Polyphenolic compounds seem to be related to the health benefits produced by the cocoa due to their antioxidant properties. Cupuassu powder, prepared from Theobroma grandiflorum seeds, is a very promising cocoa powder substitute. In order to assess the potential health benefits of the cupuassu powder, a comparison was performed between cocoa, chocolate, and cupuassu powders in relation to the content of total phenolic compounds, flavonoids and DPPH scavenging capacity of methanolic extracts. Cupuassu "chocolates" (milk, dark, and white) were also analyzed. Mineral, lipid, protein, and moisture determinations were made in cocoa and cupuassu powders and in cupuassu "chocolates". Results showed that the phenolic contents of cocoa and chocolate powders are more than three times higher than those of cupuassu powder; however, flavonoid contents were significantly lower. The DPPH scavenging capacity varied hugely among the different samples, from 0.5 (white cupuassu "chocolate") to 120 (cocoa powder) μg of Trolox equivalent per 100 g (FW), and presented a significant correlation (r = 0.977) with the total phenolic contents but not with the flavonoid contents (r = -0.035).
Resumo:
The potential health benefits attributed to green tea and its catechins such as antioxidant effects, cancer chemoprevention, and weight loss have led to a huge increase of green tea products in the food market. The objectives of this work were to analyze and compare these products in terms of phenolic contents and in vitro antioxidant capacity including tea bags, dehydrated leaves, and ready-to-drink preparations after standardization of the infusion preparation procedure. Total phenolics content in 1 cup of the different teas varied from 90 to 341 mg of catechin equivalents, and the highest and the lowest values were both those of the ready-to-drink products. Infusions prepared from tea bags had contents varying from 96 to 201 mg.200 mL-1, and there were no significant differences among batches. The DPPH radical scavenging and the Oxygen Radical Absorbing Capacities (ORAC) varied largely among the different tea preparations, from 23 to 131 mmoles of Trolox Equivalents (TE).200 mL-1 (DPPH), and from 1.2 to 5.1 mmoles of TE.200 mL-1 (ORAC), but again there were no differences among infusions or ready-to-drink commercial preparations. However, the antioxidant capacity of ready-to-drink products was partially due to the presence of other non-phenolic compounds such as ascorbic acid
Effect of processing on antioxidant potential and total phenolics content in beet (Beta vulgaris L.)
Resumo:
The antioxidant capacity of beet is associated with non-nutritive constituents, such as phenolic compounds. The purpose of this research was to evaluate the effect of two different heat-processing techniques (drying and canned) on the antioxidant potential (ABTS) and phenolics content of beets. A forced air circulation dehydrator was used for the drying. Drying at high temperatures (100 + 90 °C/5.6 hours; 90 °C/6 hours) increased the antioxidant potential of the processed products while mild drying conditions decreased it (80 °C/6 hours; 100 + 70 °C/6 hours) or had no effect on it (70 °C/7 hours; 100 + 80 °C/6 hours). For the canned products, the antioxidant potential did not differ according to the pH (4.2 to 3.8) for any of the four acids tested. Some processing methods influenced the antioxidant potential of the processed products, and this was also dependent on changes in the total phenolics content.
Resumo:
This study assessed the antioxidant, total phenolic, and physicochemical properties of in vitro Terminalia Catappa Linn (locally called castanhola) using the DPPH assay. The castanhola fruits had an average weight of 19.60 ± 0.00 g, combining shell, pulp, and seed weight, and a soluble solids content of 8 °Brix. The chemical composition was determined with predominance of carbohydrates (76,88 ± 0,58%).The titration method was used to determine Vitamin C content using 2,6-dichlorophenolindophenol (DCFI), known as reactive Tillmans resulting in no significant levels. Aqueous extracts of castanhola pulp showed a higher concentration of phenolics, 244.33 ± 18.86 GAE.g-1 of fruit, and alcoholic extracts, 142.84 ± 2.09 GAE.g-1 of fruit. EC50 values of the aqueous extract showed a greater ability to scavenge free radicals than the alcoholic extracts. The fruit had a significant content of phenolic compounds and high antioxidant capacity.
Resumo:
The total phenolic and flavonoid content, color, and antioxidant activity were evaluated from ten honey samples from Apis mellifera L. collected from Roraima State, Brazil. The total phenolic content was determined using the Folin-Ciocalteu reagent and ranged from 250 to 548 mg gallic acid kg-1 of honey. The total flavonoid content was obtained using two methods: total flavones/flavonols were determined with aluminum chloride, and flavonones/dihydroflavonols were determined with 2,4-dinitrophenylhydrazine. The results ranged from 9 to 48.6 mg of quercetine kg-1 of honey and 1805 to 2606 mg of pinocembrin kg-1 of honey, respectively. Antioxidant activity was measured with 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavengers, and the results of the IC50 ranged from 3.17 to 8.79 mg/mL. Statistical analysis demonstrated positive correlations between color intensity, flavone and flavonol content, and phenolic content and negative correlations with antioxidant capacity.
Resumo:
Considering the extensive use of hot peppers and spicy sauces in the Mexican cuisine, in the present paper, three widely consumed Mexican condiments (mole sauce, achiote, and pasilla hot pepper) were analyzed for their total phenols, flavonoids and proanthocyanidins, antioxidant activity, and protective effect against lipid oxidation in chopped pork meat. All samples were extracted first with methanol and then with acetone, and the extracts were compared. Pasilla pepper showed the highest phenolic and flavonoid content in both solvents, followed by mole and achiote. Achiote showed the highest proanthocyanidin concentration. All samples showed high antioxidant activity, and good correlations with phenolic compounds and flavonoids, while no correlation was observed in the case of condensed tannins. Mole sauce methanolic extract showed the highest inhibition of pork meat oxidation, followed by pasilla pepper, and finally achiote paste extracts. These results suggest that these condiments are useful to prevent meat lipid oxidation during storage.
Resumo:
The objective of this paper is to establish a methodology for the Food List for the southeastern region of Brazil, according to the Total Diet Study (TDS) harmonized methodology at international level. The Food List can provide data for a further TDS with evaluation of essential and toxic element dietary intakes by food analysis in laboratories. The food consumption data source used was from 2008-2009 Household Budget Survey, by the Brazilian Institute of Geography and Statistics. The Food List was composed of 82 food items grouped into 19 food groups. It reflects 100% of the daily individual food consumption inside and outside Brazilian southeastern population households. According to the recommendation that each country should carry out their own TDS and the TDS methodology used, the Food List construction can contribute to the Food List of other Brazilian regions and other countries, besides allowing the TDS development. Additionally, the Food List showed the typical diet for the southeastern region of Brazil.
Resumo:
INTRODUCTION: C4d is a marker of antibody-mediated rejection (ABMR) in kidney allografts, although cellular rejection also have C4d deposits. OBJECTIVE: To correlate C4d expression with clinico-pathological parameters and graft outcomes at three years. METHODS: One hundred forty six renal transplantation recipients with graft biopsies by indication were included. C4d staining was performed by paraffin-immunohistochemistry. Graft function and survival were measured, and predictive variables of the outcome were determined by multivariate Cox regression. RESULTS: C4d staining was detected in 48 (31%) biopsies, of which 23 (14.7%) had diffuse and 25 (16%) focal distribution. Pre-transplantation panel reactive antibodies (%PRA) class I and II were significantly higher in C4d positive patients as compared to those C4d negative. Both glomerulitis and pericapillaritis were associated to C4d (p = 0.002 and p < 0.001, respectively). The presence of C4d in biopsies diagnosed as no rejection (NR), acute cellular rejection (ACR) or interstitial fibrosis/ tubular atrophy (IF/TA) did not impact graft function or survival. Compared to NR, ACR and IF/TA C4d-, patients with ABMR C4d+ had the worst graft survival over 3 years (p = 0.034), but there was no difference between ABMR versus NR, ACR and IF/TA that were C4d positive (p = 0.10). In Cox regression, graft function at biopsy and high %PRA levels were predictors of graft loss. CONCLUSIONS: This study confirmed that C4d staining in kidney graft biopsies is a clinically useful marker of ABMR, with well defined clinical and pathological correlations. The impact of C4d deposition in other histologic diagnoses deserves further investigation.
Resumo:
Target of this study was to develop a total cost calculation model to compare all costs from manufacturing and logistics from own factories or from partner factories to global distribution centers in a case company. Especially the total cost calculation model was needed to simulate an own factory utilization effect in the total cost calculation context. This study consist of the theoretical literature review and the empirical case study. This study was completed using the constructive research approach. The result of this study was a new total cost calculation model. The new total cost calculation model includes not only all the costs caused by manufacturing and logistics, but also the relevant capital costs. Using the new total cost calculation model, case company is able to complete the total cost calculations taking into account the own factory utilization effect in different volume situations and volume shares between an own factory and a partner factory.
Resumo:
Hip resurfacing arthroplasty (HRA) and large head metal-on-metal total arthroplasty (LDH MoM THA) gained popularity during the last decade. Adverse reaction to metal debris (ARMD) is a unique complication of metal bearings. ARMD is a complex reaction caused by metal debris from metal-on- metal bearing surfaces and from trunnion corrosion of modular junctions. We analyzed survivorship of 8059 LDH MoM THAs based on data of the Finnish Arthroplasty Register. We found relatively high short-term survivorship for some LDH MoM THAs, but there were remarkable differences between the devices studied. After some alarming reports of failing MoM THAs, we studied the first 80 patients who had received a ReCap-M2a-Magnum implant at our institution and evaluated the prevalence of ARMD. We found a high prevalence of pseudotumors, and, because of this, we discontinued the use of MoM bearings and followed up all patients with a MoM THA. Bone loss due infection, osteolysis or fracture poses a great challenge for reconstructive and fracture surgery. Onlay allografting for both revision and fracture surgery provides mechanical stability and increases bone stock. Bone loss and implant stability must be assessed preoperatively and adequately classified; this provides guidelines for the operative treatment of periprosthetic fractures and revision THA. In our studies on structural allografts union rates were high, although the rates of infections and dislocations were marked. In summary, early results of the use of LDH MoM devices were encouraging. However, the survival of the LDH MoMs varied. The prevalence of adverse reaction to metal debris was high after application of the ReCap-Magnum THA. New implants should be introduced carefully and under close surveillance by University clinics and arthroplasty registers.
Resumo:
Banco del conocimiento