Distribuição de Leptopharsa heveae em seringal no Estado de São Paulo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Distribuição de Carabidae e Staphylinidae em agroecossistemas

O objetivo deste trabalho foi determinar a distribuição da riqueza de espécies e a preferência pelo habitat de Carabidae e Staphylinidae (Coleoptera), em áreas com rotação de soja e milho, em plantio direto e convencional, e em áreas adjacentes a estas com fragmento florestal e povoamento de pínus, respectivamente. Os besouros foram amostrados por meio de armadilhas de solo distribuídas em dois transectos de 100 m de comprimento. A distribuição da riqueza de espécies nas culturas, no fragmento florestal e no pínus foi avaliada por meio de análise de regressão linear. A análise de agrupamento foi empregada para identificar as espécies quanto à preferência pelos habitats: fragmento florestal, pínus, cultura e interface. A distribuição da riqueza de espécies de Carabidae e Staphylinidae não variou em relação à posição no transecto, enquanto a riqueza de espécies observada nas interfaces foi elevada em comparação com a encontrada nos demais habitats. A ocorrência de espécies de Carabidae diferiu conforme o tipo de cobertura vegetal: Megacephala sp. e Scarites sp. preferiram áreas cultivadas em sistema de rotação soja-milho; Odontochila nodicornis (Dejean) preferiu o fragmento florestal e o povoamento de pínus. A espécie Abaris basistriatus Chaudoir caracterizou-se como generalista quanto à preferência pelo habitat.

Períodos de interferência das plantas daninhas na cultura do arroz de terras altas. II - cultivar Caiapó

Os experimentos foram desenvolvidos nos anos agrícolas 2003/2004 e 2004/2005, em área experimental da Universidade Estadual Paulista, Campus de Jaboticabal (SP), com o objetivo de se determinarem os períodos de interferência das plantas daninhas na cultura do arroz de terras altas, cultivar Caiapó. O delineamento experimental foi em blocos ao acaso com quatro repetições e 16 tratamentos. Os tratamentos foram constituídos por períodos crescentes de controle ou de convivência das plantas daninhas após a emergência da cultura: 0-10, 0-20, 0-30, 0-40, 0-50, 0-60, 0-70 dias e 0-colheita. Nos dois anos, as famílias predominantes eram Poaceae, Asteraceae, Amaranthaceae e Malvaceae e as principais plantas daninhas presentes foram: Cyperus rotundus L., Cenchrus echinatus L., Digitaria spp Heist., Echinochloa crus-galli (L.) P. Beauv., Brachiaria decumbens Stapf., Eleusine indica Gaertn e Alternanthera tenella Colla. A cultivar de arroz de terras altas Caiapó deve ser mantida sem plantas daninhas nos 30 dias após a emergência.

Períodos de interferência das plantas daninhas na cultura do arroz de terras altas: I - Cultivar IAC 202

O trabalho foi conduzido com o objetivo de determinar os períodos de interferência e de controle das plantas daninhas na cultura do arroz de terras altas. Os experimentos foram instalados nos anos agrícolas de 2003/04 e 2004/05 em área experimental da Universidade Estadual Paulista, campus de Jaboticabal/SP, situado a 21º 15' 22 de latitude sul e 48º 18' 58 de longitude oeste. O cultivar utilizado foi o IAC 202, semeado, respectivamente, em 18 de novembro de 2003 e 24 de novembro de 2004. O delineamento experimental foi em blocos ao acaso, com os tratamentos constituídos por períodos crescentes de controle ou de convivência das plantas daninhas com a cultura. Os períodos iniciais de controle ou de convivência após a emergência da cultura foram: 0-10, 0-20, 0-30, 0-40, 0-50, 0-60, 0-70 dias e 0-colheita. As principais plantas daninhas em 2003/04 foram Cyperus rotundus, Cenchrus echinatus, Digitaria spp. Echinochloa crus-galli e Brachiaria decumbens. No ano agrícola de 2004/05, destacaram-se Digitaria spp., C. echinatus, Raphanus raphanistrum e Alternanthera tenella. Considerando 5% de tolerância na redução da produtividade do arroz nos anos agrícolas de 2003/04 e 2004/05, concluiu-se que os períodos anteriores à interferência (PAI) foram de 12 e 26 DAE, respectivamente; os períodos totais de prevenção à interferência (PTPI), de 40 e 42 DAE; e os períodos críticos de prevenção à interferência (PCPI), de 12 a 40 DAE e de 26 a 42 DAE, respectivamente.

Distribuição do Tamanho de Poros em Cascas de Ovos Determinada pela Porosimetria de Mercúrio

Neste trabalho foi aplicada a porosimetria de mercúrio na caracterização da porosidade de cascas de ovos de poedeiras com 28 semanas de idade. Aplicando-se a técnica de porosimetria de mercúrio, pudemos descrever as características associadas a porosidade de modo mais amplo, determinando uma distribuição do tamanho de poros nas cascas de ovos estudadas. Nossos resultados mostraram que a maioria dos poros nas cascas de ovos tem tamanhos entre 1 a 10 mim. Neste artigo introduzimos a técnica de porosimetria de mercúrio como uma nova ferramenta aplicada no estudo de cascas de ovos.

Avaliação mesoscópica da origem, distribuição e ramificação do nervo radial no braço do gato doméstico (Felis catus domesticus, Linnaeus, 1758)

The present study evaluated the origin, distribution and ramification of the radial nerves were studied in 30 adult domestic cats. The sample included 15 females and 15 males of unknown breed. The specimens were fixed in 10% formaldehyde solution. The radial nerve showed many fascicles from the origin also your ramification in superficial and deep branches. Radial nerves were observed to originate, in 16 cases (26.7%), from the ventral branch of the sixth cervical spinal nerve; in 60 cases (100%), from the ventral branch of the seventh cervical spinal nerve; in 60 cases (100%), from the ventral branch of the eight cervical nerve and in 60 cases (100%), from the ventral branch of the first thoracic nerve. The radial nerves branched out, in all of the animals studied (100.0%), to the tensor fasciae antebrachii, long, accessory, medial and lateral heads of the triceps branchii and anconeus muscles. The radial nerve emits of 14 to 25 nervous branches in this region. However, the branch of the sixth cervical spinal nerve and the nervous fascicles reveal significant differences (p <= 0.05), respectively, in or with relation to sex of the animals and the studied region.

Adubação nitrogenada em cultivares de arroz de terras altas

O objetivo deste trabalho foi avaliar a influência de diferentes doses de N em cobertura (0, 30, 60, 90 e 120 kg ha-1) sobre as características agronômicas de diferentes cultivares de arroz de terras altas (Caiapó, Primavera, Confiança, IAC 202 e Carisma) sob irrigação por aspersão durante os anos agrícolas 2003/04 e 2004/05, em área experimental da FCAV - UNESP - Jaboticabal (SP). Os cultivares Caiapó, IAC 202 e Carisma são os de maior produtividade, com o Primavera não respondendo ao incremento da adubação nitrogenada; o IAC 202 e Carisma são possuidores de índice de colheita mais elevado e responsivos ao nitrogênio aplicado em cobertura, sugerindo-se indicá-los para sistemas produtivos mais evoluídos; o cultivar Caiapó demonstra ser mais eficiente em absorver e utilizar o N contido no solo, sugerindo sua indicação para sistemas produtivos de menor aporte de tecnologia.

Características agronômicas de arroz de terras altas sob plantio direto e adubação nitrogenada e potássica

O objetivo do presente trabalho foi avaliar o efeito da adubação nitrogenada e potássica em cobertura na cultura de arroz de terras altas, utilizando um delineamento estatístico inteiramente casualizado, com 15 tratamentos, em esquema fatorial 5 x 3, representados por cinco doses de nitrogênio (0, 25, 50, 75, 100 kg ha-1) e três doses de potássio (0, 25, 50 kg ha-1), com três repetições. Os resultados mostraram que diversas características produtivas foram influenciadas positivamente pela adubação nitroggenada e potássica. A melhor combinação de doses estaria em torno de 65 kg ha-1 de N e 20 kg ha-1 de K2O, resultando em maiores valores de produtividade e proteína bruta por hectare.

Distribuição do sistema radicular da goiabeira 'Rica' produzida a partir de estaquia herbácea

O conhecimento da distribuição do sistema radicular de plantas, principalmente de perenes, não é muito estudado, devido a inúmeros fatores, dentre os quais, a dificuldade inerente ao método de amostragem. A presente pesquisa objetivou conhecer o sistema radicular da goiabeira através do método de escavação. Utilizando jatos de água, retirou-se a terra até um volume de 10 m³ (5x5x0,4m), subdivididos em paralelepípedos de 0,1 m³ (0,5x0,5x0,4m), expondo o sistema radical da goiabeira 'Rica'. Verificou-se um vigoroso sistema radicular sem a caracterização da raiz principal e com distribuição homogênea, grande número de raízes primárias, proporcionado pela adequada formação de mudas, através de estaquia herbácea.

Perdas de nutrientes por erosão e sua distribuição espacial em área sob cana-de-açúcar

O presente trabalho teve como objetivo principal determinar as perdas de nutrientes por erosão em entressulcos, sulcos e global (entressulcos + sulcos, A), em área cultivada com cana-de-açúcar submetida à queima da palhada na sua pré-colheita, na Fazenda Santa Bárbara, localizada em Guariba - SP, sob um Latossolo Vermelho eutroférrico (LVef). Parcelas experimentais foram submetidas à chuva simulada com intensidade de 80 mm h-1, durante 65 minutos. Análises do sedimento erodido indicaram altas taxas de enriquecimento: 1,62 (matéria orgânica, MO); 4,30 (P); 1,17 (K); 1,33 (Ca) e 1,24 (Mg) vezes em relação ao solo original. As perdas de solo e nutrientes, em função do tipo de erosão, obedeceram à seguinte ordem: sulcos > global > entressulcos. Análises geoestatísticas indicaram que as perdas de solo (A), MO, P, K e Ca por erosão apresentaram forte grau de dependência espacial, enquanto as perdas de Mg tiveram moderado grau de dependência espacial. Mapas da distribuição dos padrões de variabilidade espacial das perdas por erosão indicaram que o cultivo de cana-de-açúcar conserva as propriedades químicas e físicas do solo na maior parte da área.

Cadeia produtiva da farinha de mandioca na perspectiva da análise de filière e supply chain management :um estudo de caso das relações entre a agroindústria e a distribuição

This research aims to study the manioc flour productive chain in order to understand how the relationship between its segments happens, specially between the flour agroindustry and the distribuition. This research was made from a study of case that envolved three agro industries from the Potiguar wasteland and a company of food distribution. The filiére and the supply chain management analysis were applied to identify the functioning and the organization of the manioc flour productive chain. From the study of case it s noticed that the existing contracts, even the informal ones, has mutual benefits and it suggests that they be legalized

Algoritmos de otimização para decisões de localização de facilidades e distribuição em sistemas multiníveis de transporte rodoviário de carga

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developing the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. It s important to point out that, in spite of the loads being normally connected to the transformer s secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Um algoritmo para estimação de estado em alimentadores de distribuição de energia elétrica com base no método da soma de potências

Most algorithms for state estimation based on the classical model are just adequate for use in transmission networks. Few algorithms were developed specifically for distribution systems, probably because of the little amount of data available in real time. Most overhead feeders possess just current and voltage measurements at the middle voltage bus-bar at the substation. In this way, classical algorithms are of difficult implementation, even considering off-line acquired data as pseudo-measurements. However, the necessity of automating the operation of distribution networks, mainly in regard to the selectivity of protection systems, as well to implement possibilities of load transfer maneuvers, is changing the network planning policy. In this way, some equipments incorporating telemetry and command modules have been installed in order to improve operational features, and so increasing the amount of measurement data available in real-time in the System Operation Center (SOC). This encourages the development of a state estimator model, involving real-time information and pseudo-measurements of loads, that are built from typical power factors and utilization factors (demand factors) of distribution transformers. This work reports about the development of a new state estimation method, specific for radial distribution systems. The main algorithm of the method is based on the power summation load flow. The estimation is carried out piecewise, section by section of the feeder, going from the substation to the terminal nodes. For each section, a measurement model is built, resulting in a nonlinear overdetermined equations set, whose solution is achieved by the Gaussian normal equation. The estimated variables of a section are used as pseudo-measurements for the next section. In general, a measurement set for a generic section consists of pseudo-measurements of power flows and nodal voltages obtained from the previous section or measurements in real-time, if they exist -, besides pseudomeasurements of injected powers for the power summations, whose functions are the load flow equations, assuming that the network can be represented by its single-phase equivalent. The great advantage of the algorithm is its simplicity and low computational effort. Moreover, the algorithm is very efficient, in regard to the accuracy of the estimated values. Besides the power summation state estimator, this work shows how other algorithms could be adapted to provide state estimation of middle voltage substations and networks, namely Schweppes method and an algorithm based on current proportionality, that is usually adopted for network planning tasks. Both estimators were implemented not only as alternatives for the proposed method, but also looking for getting results that give support for its validation. Once in most cases no power measurement is performed at beginning of the feeder and this is required for implementing the power summation estimations method, a new algorithm for estimating the network variables at the middle voltage bus-bar was also developed

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developping the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. Its important to point out that, in spite of the loads being normally connected to the transformers secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity