Earthen plasters: the potential of the clayey soils of barrocal region in Algarve

Due to their high adsorption capacity of water vapor, earthen plasters can act as a moisture buffer, contributing to balance the relative humidity of the indoor environment of buildings. As a consequence of this capacity earthen plasters may also contribute to the perception of thermal comfort, since a high relative humidity increases the thermal conductivity of air and restricts skin evaporation, increasing the discomfort associated with the perception of heat or cold. Simultaneously, earthen plasters may also contribute to the indoor air quality. In one hand, by mitigating health problems of the respiratory system associated with indoor environment with high relative humidity, in which increases the risk of development of microorganisms usually responsible for infections, allergies or asthma. In the other hand, by mitigating the probability of inflammation of the respiratory system airways associated to exceedingly dry indoor environments. Therefore it also becomes expectable that earthen plasters may contribute for reducing the needs for air conditioning and mechanical ventilation in buildings and, thereby, also allowing the reduction of the associated energy consumption. The «Barrocal» region, located in the sedimentary basin of Algarve, South Portugal, presents geomorphological characteristics that promote the occurrence of soils with a clay mineralogy dominated by illite, which is a clay mineral characterized by a high adsorption capacity of water vapor and low expansibility. This fact turns expectable that these soils have a high potential for interior plastering. In order to evaluate this potential four mortars were formulated with an increasing content of clayey soil extracted from a selected clay quarry from «Barrocal» region. The results from the preliminary characterization campaign confirmed the reduced linear shrinkage of these mortars, as well as their high adsorption-desorption capacity, that is positively correlated with the content of clayey soil present in mortar formulation. However, the mechanical tests showed that the mechanical resistance of these mortars should be improved, for instance through the addition of natural fibers for reinforcement, which will be investigated in future research. This research contributed to increase certainty regarding the potential of clayey soils of the «Barrocal» sub-region of Algarve to produce mortars suitable for eco-efficient interior plastering.

A CMMI-compliant requirements management and development process

Requirements Engineering has been acknowledged an essential discipline for Software Quality. Poorly-defined processes for eliciting, analyzing, specifying and validating requirements can lead to unclear issues or misunderstandings on business needs and project’s scope. These typically result in customers’ non-satisfaction with either the products’ quality or the increase of the project’s budget and duration. Maturity models allow an organization to measure the quality of its processes and improve them according to an evolutionary path based on levels. The Capability Maturity Model Integration (CMMI) addresses the aforementioned Requirements Engineering issues. CMMI defines a set of best practices for process improvement that are divided into several process areas. Requirements Management and Requirements Development are the process areas concerned with Requirements Engineering maturity. Altran Portugal is a consulting company concerned with the quality of its software. In 2012, the Solution Center department has developed and applied successfully a set of processes aligned with CMMI-DEV v1.3, what granted them a Level 2 maturity certification. For 2015, they defined an organizational goal of addressing CMMI-DEV maturity level 3. This MSc dissertation is part of this organization effort. In particular, it is concerned with the required process areas that address the activities of Requirements Engineering. Our main goal is to contribute for the development of Altran’s internal engineering processes to conform to the guidelines of the Requirements Development process area. Throughout this dissertation, we started with an evaluation method based on CMMI and conducted a compliance assessment of Altran’s current processes. This allowed demonstrating their alignment with the CMMI Requirements Management process area and to highlight the improvements needed to conform to the Requirements Development process area. Based on the study of alternative solutions for the gaps found, we proposed a new Requirements Management and Development process that was later validated using three different approaches. The main contribution of this dissertation is the new process developed for Altran Portugal. However, given that studies on these topics are not abundant in the literature, we also expect to contribute with useful evidences to the existing body of knowledge with a survey on CMMI and requirements engineering trends. Most importantly, we hope that the implementation of the proposed processes’ improvements will minimize the risks of mishandled requirements, increasing Altran’s performance and taking them one step further to the desired maturity level.

Case histories of infectious disease management in developing countries: Phnom Penh and Kabul

Healthcare in developing countries is affected by severe poverty, political instability and diseases that may be of lesser importance in industrialized countries. The aim of this paper was to present two cases and histories of physicians working in hospitals in developing countries and to discuss the opportunities for clinical investigation and collaboration. Cases of patients in Phnom Penh, Cambodia, with histoplasmosis, cryptococcal meningitis, crusted scabies, cerebral lesions and human immunodeficiency virus and of patients in Kabul, Afghanistan, with liver cirrhosis, nephrotic syndrome and facial ulcer are discussed. Greater developmental support is required from industrialized nations, and mutually beneficial cooperation is possible since similar clinical problems exist on both sides (e.g. opportunistic cardiovascular infections). Examples for possible support of hospital medicine include physician interchange visits with defined objectives (e.g. infection control or echocardiography training) and collaboration with clinical investigations and projects developed locally (e.g. epidemiology of cardiovascular diseases or nosocomial bloodborne infections).

The use of analytical hierarchy process in spatial decision support system for land use management

Geographic information systems give us the possibility to analyze, produce, and edit geographic information. Furthermore, these systems fall short on the analysis and support of complex spatial problems. Therefore, when a spatial problem, like land use management, requires a multi-criteria perspective, multi-criteria decision analysis is placed into spatial decision support systems. The analytic hierarchy process is one of many multi-criteria decision analysis methods that can be used to support these complex problems. Using its capabilities we try to develop a spatial decision support system, to help land use management. Land use management can undertake a broad spectrum of spatial decision problems. The developed decision support system had to accept as input, various formats and types of data, raster or vector format, and the vector could be polygon line or point type. The support system was designed to perform its analysis for the Zambezi river Valley in Mozambique, the study area. The possible solutions for the emerging problems had to cover the entire region. This required the system to process large sets of data, and constantly adjust to new problems’ needs. The developed decision support system, is able to process thousands of alternatives using the analytical hierarchy process, and produce an output suitability map for the problems faced.

Indexing and active fund management: International evidence

Author's pre-print

Enhancement of an implemented rating model and impact on existing risk management processes: A hands-on approach from financial supplier risk management within the automotive industry

The purpose of this paper is to conduct a methodical drawback analysis of a financial supplier risk management approach which is currently implemented in the automotive industry. Based on identified methodical flaws, the risk assessment model is further developed by introducing a malus system which incorporates hidden risks into the model and by revising the derivation of the most central risk measure in the current model. Both methodical changes lead to significant enhancements in terms of risk assessment accuracy, supplier identification and workload efficiency.

How to optimize Lipton’s business model in order to stimulate tea consumption in Portugal and increase Lipton Leaf tea market share?: The importance of distribution and sales channels management in a B2B2C market

Field Lab Entrepreneurial Innovative Ventures

The effect of ownership concentration on management behavior in Belgian banks: A case study

Double Degree. A Work Project, presented as part of the requirements for the Award of a Master’s Degree in Finance from NOVA – School of Business and Economics and a Masters Degree in Management from Louvain School of Management

Business continuity management at Banif: Defining and selecting recovery strategies

This project aims to delineate recovery strategies for a Portuguese Bank, as a way to increase its preparedness towards unexpected disruptive events, thus avoiding an operational crisis escalation. For this purpose, Business Continuity material was studied, a risk assessment performed, a business impact analysis executed and new strategic framework for selecting strategies adopted. In the end, a set of recovery strategies were chosen that better represented the Bank’s appetite for risk, and recommendations given for future improvements.

Strategic account management: the path to gain customer loyalty

The account management field works closely with the sales team, serving as the customer’s primary point of contact. This project’s purpose was to understand if shifting the account management from brand centric to customer centric, would be the best fit for a Portuguese Pharmaceutical company. This customer centric approach - Strategic Account Management (SAM) - was studied, understanding the implicated trade-offs to the company. The workforce was probed about the project and their comments were analyzed. The conclusion points to an implementation of SAM and proposes the adaptations to follow in order to smooth the change.

How to improve Sonae's processes of suppliers of services' management?

Sonae is one of the greatest retailers in Portugal. As the business got bigger, it centralized operations. Direcção de Serviços Administrativos processes all invoices sent by suppliers. However, there are many which deliver errors and are not processed automatically. As a result, there are lost invoices and suppliers who are not paid, while the company’s accountability becomes less transparent. Such is due to a lack of proactive attitude towards suppliers as well as to a lack of incentives for employees to perform well. Great savings may be achieved with little effort, if the right things are measured so that the right tools may be applied.

Exporting a model of integrated disease management: A cross-case study analysis and application to Associação Protectora dos Diabéticos de Portugal

Although literature is lacking in the topic of internationalization of services, we manage to apply both the Uppsala model and the Eclectic Theory to the healthcare service. A cross-case study analysis with three international hospitals is done in order to define an internationalization pattern and conditions for a successful process. This is then applied to Associação Protectora dos Diabéticos de Portugal with the purpose of defining an internationalization strategy to the Association.

Challenge in the management of infective endocarditis with multiple valvular involvement

We describe the case of a 41-year-old man with congenital heart disease and infective endocarditis (IE), who presented multiple vegetations attached to the pulmonary, mitral, and aortic valves. Three valve replacements were performed, but the patient developed an abscess at the mitral-aortic intervalvular fibrosa and died due to sepsis. We briefly discuss the indications for surgery in IE, emphasizing its role in the treatment of uncontrolled infection.

Towards an integrated technology management across the rail supply chain extended to society: building the case study on high-speed trains

The present paper was prepared for the course “Project III”, with the supervision of Prof. António Moniz, reporting on the author speaking notes at the Winter School on Technology Assessment, 6-7 December 2010, as part of the Doctoral Programme on Technology Assessment at FCT-UNL.

Wealth Management in Africa: The Cape Verde Opportunity

This work project consists of a comprehensive study of the possibility of opening a Wealth Management (WM) firm located in Cape Verde (CV), and was made at the request of NovoBanco’s Research Sectorial team. WM is a growing industry that consists in the set of financial services provided to wealthy clients. After taking into account the expected industry growth of the Sub-Saharan region, the preferences of the African wealthy, the current industry structure, and the advantages and disadvantages of locating a WM business in CV, it is concluded that a business opportunity exists. The reasons for thus, along with relevant recommendations, including which services a new business should offer and whom to target specifically, are presented in the final section.