Crescimento e produtividade de cana-de-açúcar em função da disponibilidade hídrica dos Tabuleiros Costeiros de Alagoas

The aim of this study was to evaluate the interaction among meteorological variables and yield components of six sugarcane varieties and to establish appropriate varietal management at the Coastal Tablelands of the Alagoas State (Brazil). The sugarcane planting was carried out in September 2005, and three cane harvests were made in November 2006, 2007 and 2008. The experimental design was in randomized block with six treatments consisting of the varieties RB863129, RB867515, RB92579, RB93509, RB931003 and RB951541, with four replications. The growth variables evaluated were number and length of stalks, leaf area index, and productivity of stalks and sugar. On average, the crop water balance showed water deficit of 869 mm between September and March and excess of 837 mm from April to August. The irregularity of rainfall in the Coastal Tablelands promoted differential responses in the development and productivity of varieties of sugarcane. Varieties RB93509 and RB931003 are considered options for the varietal management in this region.

Suscetibilidade à podridão negra e produtividade de brócolis em função de doses de nitrogênio e potássio

The purpose of this study was to investigate the influence of potassium and nitrogen on the severity of black rot and yield of head. The experiment was carried out in split plots with factorial subplots, in randomized blocks with four replications. In the plots we assessed the influence of inoculation (injured plants with distilled water and inoculated with Xanthomonas campestris pv. campestris) and in the subplots we evaluated the 4 x 4 factorial, potassium doses (0, 275, 550 and 825 kg ha-1) and nitrogen (0, 150, 300 and 450 kg ha-1). The hybrid Broccoli BRO68 was inoculated using the toothpick method at 64 days after sowing. We observed that potassium in the plant reduced the disease, but nitrogen increased disease. We estimated that the highest levels of potassum in the plant reduced the severity of the disease but lack or excess of nitrogen increased disease severity. The highest production of broccoli inflorescence was obtained at doses from 541 to 751 kg ha-1 of K2O and 286 to 328 kg ha-1 of N. However, when considering a balanced fertilization to obtain higher yield and size of inflorescences and greater resistance to black rot, the ideal doses are 283 kg ha-1 of N and 550 kg ha-1 of K2O.

Teor de nitrogênio inorgânico no solo em função de plantas de cobertura, fontes de nitrogênio e inibidor de nitrificação

A utilização de plantas de cobertura pode alterar a rela-ção NO3-:NH4+ no solo, proporcionando maiores quantidades de NH4+ e podendo viabilizar o desenvolvimento de culturas que absorvem mais e preferem esta forma de nitrogênio (N), como o arroz. Objetivou-se avaliar a influência da interação de plantas de cobertura e fontes de N, com e sem inibidor de nitrificação (dicianodiamida), em sistema plantio direto (SPD). O experimento foi realizado em 2009/2010, em Botucatu (SP), em Latossolo Vermelho distroférrico cultivado por seis anos no SPD. O delineamento experimental foi em blocos casualizados, em esquema de parcela subdividida, com quatro repetições. As parcelas foram constituídas por seis espécies de plantas de cobertura do solo (Urochloa brizantha, U. decumbens, U. humidicola, U. ruziziensis, Pennisetum americanum e Crotalaria spectabilis) e as subparcelas por sete formas de fertilização nitrogenada, aos 0 e 30 dias após a emergência (DAE) do arroz [1 - controle, sem aplicação de nitrogênio; 2 - nitrato de cálcio (40 + 40 kg ha-1); 3 - nitrato de cálcio (0 + 80 kg ha-1); 4 - sulfato de amônio (40 + 40 kg ha-1); 5 - sulfato de amônio (0 + 80 kg ha-1); 6 - sulfato de amônio + dicianodiamida (40 + 40 kg ha-1); e 7 - sulfato de amônio + dicianodiamida (0 + 80 kg ha-1)]. O uso do inibidor de nitrificação e o cultivo de C. spectabilis proporcionaram maiores teores de amônio no solo. A aplicação da fonte amoniacal sem inibidor em dose total aos 30 DAE e com inibidor tanto parcelada quanto em dose total proporcionaram os maiores teores de nitrato no solo.

Biodiesel de buriti em trator: desempenho em função do tipo de diesel e da proporção de mistura na operação de preparo do solo

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

A aplicação do principio da função social da empresa nos empreendimentos recuperados por trabalhadores: um estudo comparado entre Brasil e Argentina

Pós-graduação em Direito - FCHS

Zeros da função zeta de Riemann e o teorema dos números primos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Verificação da dureza de gessos em função da compatibilidade com materiais de moldagem à base de borracha

Currently the most widespread material used in dies is gypsum that together with its simple technique has very satisfactory mechanical, chemical and physical properties. However, its compactibility with the impression materials can compromise the die surface quality. In our work, we studies the hardness of the two gypsum types: Type III (die stone) and type IV (improved die stone), as well as the influence of the contact with three types of impression materials: polymerized silicone for condensation (Xantopren), polysulfide (Permlastic) and polymerized silicone by addition (Provil). As comparison parameter gypsum was used in contact with a glass surface…(Complete abstract click electronic access below)

Qualidade de sementes de soja convencional e transgênica em função da dessecação das plantas com glyphosate

Pós-graduação em Agronomia (Agricultura) - FCA

A indeterminação pragmática e semântica do sujeito

Pós-graduação em Estudos Linguísticos - IBILCE

Desempenho agronômico de feijão e milho em cultivo solteiro e consorciado, em função da população de plantas de feijão

Pós-graduação em Agronomia - FEIS

Estimativa da produtividade de trigo em função da adubação nitrogenada utilizando modelagem neuro fuzzy

Currently new techniques for data processing, such as neural networks, fuzzy logic and hybrid systems are used to develop predictive models of complex systems and to estimate the desired parameters. In this article the use of an adaptive neuro fuzzy inference system was investigated to estimate the productivity of wheat, using a database of combination of the following treatments: five N doses (0, 50, 100, 150 and 200 kg ha(-1)), three sources (Entec, ammonium sulfate and urea), two application times of N (at sowing or at side-dressing) and two wheat cultivars (IAC 370 and E21), that were evaluated during two years in Selviria, Mato Grosso do Sul, Brazil. Through the input and output data, the system of adaptive neuro fuzzy inference learns, and then can estimate a new value of wheat yield with different N doses. The productivity prediciton error of wheat in function of five N doses, using a neuro fuzzy system, was smaller than that one obtained with a quadratic approximation. The results show that the neuro fuzzy system is a viable prediction model for estimating the wheat yield in function of N doses.

Demanda energética na colheita de híbridos de milho para silagem em função do estádio de maturidade e tamanho de partícula

Corn is the crop most used for making silage. The efficiency of the process should also be evaluated by cost per kg of dry matter harvested (kgDM). The objective of this study was to evaluate energy consumption in the harvest of corn hybrids for silage depending on the texture of the hybrid, four and three harvest maturities of particle sizes - Tp was used a tractor Massey Ferguson MF 610 model 86 cv. Cutting and harvesting the forage harvester is used model JF92 Z10. To obtain data on fuel consumption (CC) and time spent for each plot, we used a flow meter, installed near the fuel filter of the tractor. The experimental design was completely randomized in a split plot. The interaction between factors triple stage hybrid * Harvest * Tp. The velocity and displacement of the tractor were different for the maturities for hybrid hard texture. The CC schedule for hybrid dent increased harvest maturity earlier and at lower Tp. Consumption was lower by kgDM later maturity, hard texture and bite respectively. The theoretical power was higher in earlier maturity and yield were higher for hybrid hard texture in the most advanced. The CC was lower in late maturity and the hybrid hard texture can be used for silage in relation to the Cc and income in later maturity in higher Tp.

Produtividade e qualidade de grãos de canola em função da adubação nitrogenada e sulfatada

The canola (Brassica napus, L.) cultivation was encouraged for grain and oil production at the 80's, and it is also considered a good option for crop rotation. The nitrogen is one of the most required nutrients by the plant to increase its production, while sulfur is essential to provide seed quality. Thus, the objective of this study was, at Cerrado region, evaluate the effects of nitrogen and sulfur fertilization at yield and contents of oil and crude protein in the grains. We also sought relate to grain yield the S content in the soil and concentrations of N and S in the diagnosis leaf. The experiment was conducted in Uberaba County, State of Minas Gerais, Brazil, in an Oxisol, utilizing the Hyola 401 hybrid. The treatments consisted in a factorial scheme 5 x 4 (five N rates: 0, 60, 100, 140 and 180 kg ha(-1) and; four S rates: 0, 15, 30 and 60 kg ha(-1)) in a randomized blocks design, with four replicates. The nitrogen and sulfur fertilization increased canola grain yield, without significantly alter contents of oil and crude protein. Rates higher than to 140 kg ha(-1) of N and 15 kg ha(-1) of S provided grain yield above 1100 kg ha(-1). Plots with yield higher than to 1000 kg ha(-1) presented foliar concentration of N above 52 g kg(-1). The highest S content was observed at the 0.15-0.30 m layer, proving the sulfate anion mobility. The lowest grain yield were observed when the S content in the soil at this layer were less than 4 mg dm(-3). The N concentrations in the diagnostic leaf and S-SO4-2 content in the 0.15-0.30 m layer correlated positively with crop yield.

Produção de repolho em função de doses e fontes de potássio em cobertura

The objective of this research was to evaluate the effects of rates and sources of potassium in top dressing on yield of cabbage hybrid Kenzan. Two experiments were conducted (15/07 to 22/11/2010 and 28/09/2010 to 27/01/2011) and nine treatments, resulted from a factorial 4 rates (45; 90; 135 and 180 kg ha(-1) of K2O) x 2 sources (KCl and K2SO4) + 1 control (without K in top dressing) were evaluated at randomized block design, with 4 replicates. After the harvest, fresh and dry weight of cabbage head and of external leaves; leaf number (from cabbage and external); diameter and height of cabbage head were evaluated. It was evaluated soil chemical characteristics at the end of first experiment and content of macro and micronutrients in plants. It was observed that potassium rates and sources did not influence most of evaluated characteristics. K content in plant increased linearly with KCl application. Results obtained show that, probably, it is not necessary application of K in top dressing when base fertilization is done with this nutrient, besides existing recommendations for this crop.

Modelagem da área foliar de duas cultivares de amendoim em função das dimensões lineares dos folíolos

The purpose of this study was to determine a shape factor to estimate area of leaflets of two peanut cultivars (IAC TATU ST, IAC RUNNER 886). Correlation studies were conducted involving real leaf area (Sf) and leaf length (C), maximum leaf width (L) and the product between C and L. For each cultivar was determined a form factor (f) by means of regression analysis between the product of the length by the width and the actual area of leaves and the correlation between leaf area estimated by the correction factor and direct measurement. All evaluated models (linear, exponential or geometric) provided good estimates of leaf area (above 87%). Linear models had the best fit, passing or not through the origin. From a practical viewpoint, it is suggested to use the linear model involving the C and L product, using a linear coefficient equal to zero, with values of factor f equal to 0.7111 and 0.7266 for IAC RUNNER 886 and IAC TATU ST, respectively. The method of dimensions is feasible for the estimation of leaf area for both peanut cultivars, for showing good r(2) values (0.97), with errors below 3%, even when used with independent data.