Plataforma Robótica de Baixíssimo Custo para Robótica Educacional

Robots are present each time more on several areas of our society, however they are still considered expensive equipments that are restricted to few people. This work con- sists on the development of control techniques and architectures that make possible the construction and programming of low cost robots with low programming and building complexity. One key aspect of the proposed architecture is the use of audio interfaces to control actuators and read sensors, thus allowing the usage of any device that can produce sounds as a control unit of a robot. The work also includes the development of web ba- sed programming environments that allow the usage of computers or mobile phones as control units of the robot, which can be remotely programmed and controlled. The work also includes possible applications of such low cost robotic platform, including mainly its educational usage, which was experimentally validated by teachers and students of seve- ral graduation courses. We also present an analysis of data obtained from interviews done with the students before and after the use of our platform, which confirms its acceptance as a teaching support tool

RoboEduc: especificação de um software educacional para ensino da robótica às crianças como uma ferramenta de inclusão digital

Because of social exclusion in Brazil and having as focus the digital inclusion, was started in Federal University of Rio Grande do Norte a project that could talk, at the same time, about concepts of collaborative learning and educational robotics , focused on children digitally excluded. In this context was created a methodology that approaches many subjects as technological elements (e. g. informatics and robotics) and school subjects (e. g. Portuguese, Mathematics, Geography, History), contextualized in everyday situations. We observed educational concepts of collaborative learning and the development of capacities from those students, as group work, logical knowledge and learning ability. This paper proposes an educational software for robotics teaching called RoboEduc, created to be used by children digitally excluded from primary school. Its introduction prioritizes a friendly interface, that makes the concepts of robotics and programming easy and fun to be taught. With this new tool, users without informatics or robotics previous knowledge are able to control a robot, previously set with Lego kits, or even program it to carry some activities out. This paper provides the implementation of the second version of the software. This version presents the control of the robot already used. After were implemented the different levels of programming linked to the many learning levels of the users and their different interfaces and functions. Nowadays, has been implemented the third version, with the improvement of each one of the mentioned stages. In order to validate, prove and test the efficience of the developed methodology to the RoboEduc, were made experiments, through practice of robotics, with children for fourth and fifth grades of primary school at the City School Professor Ascendino de Almeida, in the suburb of Natal (west zone), Rio Grande do Norte. As a preliminary result of the current technology, we verified that the use of robots associated with a well elaborated software can be spread to users that know very little about the subject, without the necessity of previous advanced technology knowledges. Therefore, they showed to be accessible and efficient tools in the process of digital inclusion

Semeadura direta de milho com dois tipos de sulcadores de adubo, em nível e no sentido do declive do terreno

O presente estudo teve como objetivo avaliar parâmetros operacionais de um conjunto mecanizado envolvendo trator e semeadora, assim como o rendimento da cultura do milho semeada nas diferentes configurações das máquinas e combinações com o ambiente de produção. Os tratamentos consistiram de tipos de sulcadores (discos duplos e hastes), os quais foram avaliados em experimentos em que a operação de semeadura direta do milho foi efetuada transversalmente ao declive (em nível) e em aclive e declive. A semeadura contra o declive e o uso de haste sulcadora implicaram maior demanda de esforço de tração, patinagem do trator e consumo de combustível por área trabalhada e não influenciaram o volume de solo mobilizado, a população de plantas e a produtividade de grãos do milho, em relação à operação realizada em declive e uso de sulcador de discos duplos, respectivamente. A utilização de sulcador do tipo haste resultou em menor número de plantas acamadas e quebradas, em relação ao uso de discos duplos, independentemente do sentido da operação. A principal diferença entre semear em nível ou em declive é a formação de sulcos orientados no sentido do terreno, pela ação de sulcadores do tipo haste e elevada patinagem dos rodados do trator, já que o consumo de combustível por área trabalhada e capacidade operacional não foram afetados por aquelas variáveis.

Modelagem e controle adaptativo de uma planta didática de nível com instrumentação industrial

The control, automation and optimization areas help to improve the processes used by industry. They contribute to a fast production line, improving the products quality and reducing the manufacturing costs. Didatic plants are good tools for research in these areas, providing a direct contact with some industrial equipaments. Given these capabilities, the main goal of this work is to model and control a didactic plant, which is a level and flow process control system with an industrial instrumentation. With a model it is possible to build a simulator for the plant that allows studies about its behaviour, without any of the real processes operational costs, like experiments with controllers. They can be tested several times before its application in a real process. Among the several types of controllers, it was used adaptive controllers, mainly the Direct Self-Tuning Regulators (DSTR) with Integral Action and the Gain Scheduling (GS). The DSTR was based on Pole-Placement design and use the Recursive Least Square to calculate the controller parameters. The characteristics of an adaptive system was very worth to guarantee a good performance when the controller was applied to the plant

S-Educ: Um Simulador de Ambiente de Robótica Educacional em Plataforma Virtual

We propose a robotics simulation platform, named S-Educ, developed specifically for application in educational robotics, which can be used as an alternative or in association with robotics kits in classes involving the use of robotics. In the usually known approach, educational robotics uses robotics kits for classes which generally include interdisciplinary themes. The idea of this work is not to replace these kits, but to use the developed simulator as an alternative, where, for some reason, the traditional kits cannot be used, or even to use the platform in association with these kits. To develop the simulator, initially, we conducted research in the literature on the use of robotic simulators and robotic kits, facing the education sector, from which it was possible to define a set of features considered important for creating such a tool. Then, on the software development phase, the simulator S-Educ was implemented, taking into account the requirements and features defined in the design phase. Finally, to validate the platform, several tests were conducted with teachers, students and lay adults, in which it was used the simulator S-Educ, to evaluate its use in educational robotics classes. The results show that robotic simulator allows a reduction of financial costs, facilitate testing and reduce robot damage inherent to its use, in addition to other advantages. Furthermore, as a contribution to the community, the proposed tool can be used to increase adhesion of Brazilian schools to the methodologies of educational robotics or to robotics competitions

Acelerando algoritmos de baixo nível em visão robótica com hardware reconfigurável

A challenge that remains in the robotics field is how to make a robot to react in real time to visual stimulus. Traditional computer vision algorithms used to overcome this problem are still very expensive taking too long when using common computer processors. Very simple algorithms like image filtering or even mathematical morphology operations may take too long. Researchers have implemented image processing algorithms in high parallelism hardware devices in order to cut down the time spent in the algorithms processing, with good results. By using hardware implemented image processing techniques and a platform oriented system that uses the Nios II Processor we propose an approach that uses the hardware processing and event based programming to simplify the vision based systems while at the same time accelerating some parts of the used algorithms

Ambiente de desenvolvimentoweb multiplataforma configurável para robótica educacional

We propose an online configurable multiplatform development environment specifically developed for educational robotics applications. The environment, which appears as an extension of RoboEduc software, allows the programming of several programmable robots to be performed using the R-Educ language. We make it possible for the user to program in the language R-Educ and then translate the code to a language previously registered, compiled and then sent or executed by the robot. To develop this work, we conducted a bibliographic research about the main programming languages used in robotics, as well as their definitions and paradigms, from which it was possible to define a set of patterns considered important for the creation of this environment. Then, in the software development phase, we implemented the development environment, bearing in mind the requirements and functionality defined in the design phase. Finally, to validate the platform, we conducted some trials of programming languages and verificate if the complete cycle was satisfied - registration of language, programming in R-Educ, compilation for the registered language, compilation to the machine code and send the code for the robot

Plantas aquáticas e nível de infestação das espécies presentes no reservatório de Bariri, no Rio Tietê

O monitoramento da vegetação aquática permite avaliar a evolução das comunidades e determinar o potencial de danos associados a essas populações. O objetivo do trabalho foi identificar as plantas aquáticas e os níveis de infestação de cada espécie, presentes no reservatório de Bariri. Foram avaliados todos os focos de vegetação aquática presente na represa (194 pontos), e os pontos foram demarcados com um aparelho de GPS. As plantas foram identificadas e realizou-se uma estimativa visual do valor geográfico do ponto (tamanho da área) e a distribuição proporcional das plantas no foco de infestação. Foram encontradas 15 espécies de plantas aquáticas vegetando na represa de Bariri. Considerando que as principais espécies ocorreram com níveis de infestação acima de 10%, as mais importantes foram: Brachiaria mutica (27,0% da área e 97,4% de freqüência), B. subquadripara (22,7% da área e 96,9% de freqüência), Eichhornia crassipes (13,8% da área e 85,6% de freqüência) e Typha angustifolia (16,7% da área e 72,7% de freqüência). Outra espécie que pode ser destacada e que apresentou um bom potencial de infestação foi Enidra sessilis, que ocorreu em 8,9% de ocupação na área vegetada e com 76,3% de freqüência.

Controle feedback de nível baseado em sensor de imagem aplicado ao equipamento misturador-decantador à inversão de fases (MDIF®)

The treatment of wastewaters contaminated with oil is of great practical interest and it is fundamental in environmental issues. A relevant process, which has been studied on continuous treatment of contaminated water with oil, is the equipment denominated MDIF® (a mixer-settler based on phase inversion). An important variable during the operation of MDIF® is the water-solvent interface level in the separation section. The control of this level is essential both to avoid the dragging of the solvent during the water removal and improve the extraction efficiency of the oil by the solvent. The measurement of oil-water interface level (in line) is still a hard task. There are few sensors able to measure oil-water interface level in a reliable way. In the case of lab scale systems, there are no interface sensors with compatible dimensions. The objective of this work was to implement a level control system to the organic solvent/water interface level on the equipment MDIF®. The detection of the interface level is based on the acquisition and treatment of images obtained dynamically through a standard camera (webcam). The control strategy was developed to operate in feedback mode, where the level measure obtained by image detection is compared to the desired level and an action is taken on a control valve according to an implemented PID law. A control and data acquisition program was developed in Fortran to accomplish the following tasks: image acquisition; water-solvent interface identification; to perform decisions and send control signals; and to record data in files. Some experimental runs in open-loop were carried out using the MDIF® and random pulse disturbances were applied on the input variable (water outlet flow). The responses of interface level permitted the process identification by transfer models. From these models, the parameters for a PID controller were tuned by direct synthesis and tests in closed-loop were performed. Preliminary results for the feedback loop demonstrated that the sensor and the control strategy developed in this work were suitable for the control of organic solvent-water interface level

Uso de índices de reflectância das folhas para avaliar o nível de nitrogênio em grama-bermuda

A reflectância da folha em determinados comprimentos de onda pode ser uma alternativa para estimar a concentração de nitrogênio (N) na planta, devido à relação entre o teor de clorofila e de N no tecido foliar. Este trabalho teve por objetivo avaliar índices da cor verde em grama-bermuda para predizer o nível de N na planta. O experimento foi conduzido em área comercial de produção de grama-bermuda, localizada na cidade de Capela do Alto/SP. O delineamento experimental utilizado foi de blocos ao acaso, com cinco tratamentos (0, 150, 300, 450 e 600kg de N ha-1) e quatro repetições. Foi avaliada a reflectância das folhas pelo uso de medidor de cor de grama, clorofilômetro, e por meio de análise da imagem digital. O matiz (H) e índice de cor verde escuro (ICVE), calculados com base nos índices de reflectância da imagem digital, o ICVE, obtido com medidor de cor de grama, e a intensidade de coloração verde (ICV), obtida com o clorofilômetro, apresentaram forte correlação positiva com a concentração de N e a taxa de cobertura do solo (TCS) da grama-bermuda, podendo ser utilizados como índices auxiliares na recomendação de adubação nitrogenada para a cultura. Os valores obtidos que podem servir como primeiros índices para avaliação do estado nutricional em N na grama-bermuda Celebration são: H de 88 a 109o e ICVE de 0,54 a 0,66 (imagem digital); H de 67 a 76o e ICVE de 0,41 a 0,44 (medidor de cor da grama TCM 500); e ICV de 374 a 471 (clorofilômetro CM 1000).

A parentetização: estratégia de construção textual-interativa do chat educacional

Este artigo descreve, sob a Perspectiva Textual-Interativa, tal como definida por Jubran (2006a), a parentetização (JUBRAN, 1996, 2006b) em uma conversação síncrona mediada por computador, voltada para a esfera educacional, escrita em espanhol por participantes brasileiros - o chat educacional. Observamos que a parentetização constitui-se como uma das regularidades dos processos de elaboração textual. Trata-se, portanto, de uma estratégia de construção textual do chat educacional bastante produtiva.

A correção como procedimento de reformulação em chat educacional escrito em espanhol por brasileiros: tipos de operacionalização e marcas

O objetivo deste artigo foi analisar, nas interações realizadas por escrito dentro de um chat educacional, os tipos de operacionalização para o processo da correção - enquanto procedimento de reformulação, de acordo com a Perspectiva Textual-Interativa. O corpus, constituído por 31 sessões e por 17 participantes (1 professor e 16 alunos), mostrou a presença de quatro tipos de operacionalização da correção: autocorreção autoiniciada, autocorreção heteroiniciada, heterocorreção autoiniciada e heterocorreção heteroiniciada. O maior número de ocorrências foi o da autocorreção autoiniciada. Esse resultado sugere que: i) os participantes, nesse contexto, parecem se preocupar em preservar a auto-imagem, já que a correção não era essencial à compreensão do texto; ii) os escreventes conhecem as regras e, por isso, se monitoram; iii) a própria ferramenta chat contribui para a autocorreção autoiniciada; e iv) a preferência pela autocorreção autoiniciada parece evitar que o professor assuma o papel de corretor do curso de língua. Foram identificados, ainda, padrões de reformulação com e sem marcadores inscritos na materialidade do texto.

Cosmoeducação: uma abordagem transdisciplinar no ensino de astronomia

This work proposes a transdisciplinary approach that integrates transpersonal psychology exercises with astronomy teaching, seeking to allow one to reintegrate the sky in his/her daily life, expand his/her environmental awareness and eventually experiment the unity between human and cosmos. This proposal intends to collaborate with the supplying of education, which lacks initiatives of this kind, with the promotion of an integration of the scientific knowledge with the human experience that transcends the materialistic and fragmentary objectives of the current educational system. As a result of that lack, the teachers formation is also poor as for an integral and transdisciplinary approach. Besides, we also approached in this research the necessity to propose alternatives so that the educators may work in a more assertive way with the environmental and anthropological crisis in which we are living. Our working hypothesis is that the contents of astronomy, when they are dealt in a holisticanthropological focus and are related with transpersonal psychology practices, can come to be an efficient cultural-academic vehicle, capable of propitiating an expansion of consciousness and changes in the way one conceives the world. Such changes are necessary so that a more solidary, fair and ecologically balanced life may come to exist and prevail in the planet. Part of the collection of data was done through the ethnographic method, once an anthropological interpretation is inextricably associated with this kind of educational intervention, which will naturally include ethno-visions of the universe as well as specific cultural elements. In the beginning the scope of this research was a group of students attending the Astronomy assignment in an undergraduate Geography course (UFRN), in which we accomplished participant observation, half-open interviews and the first experimental practices mentioned. After the evaluation of the first data collected from that initial group, we elaborated an academic extension course, Laboratory in Cosmoeducation, and we offered it to teachers of the 1st and 2nd cycles of the fundamental level of the Alceu Amoroso Lima State School, located in the North Zone of Natal. We prized self-experimentation in that course, so that the teachers could enrich their repertoire of personal experiences, stimulating meditative reflections and eventual changes in the ways of conceiving the world and in their pedagogical practice. The transdisciplinary attitude permeated all our educational action, because this approach transcends the boundaries of disciplines, seeking essentially the integral development of the human being. The process has made us realize that the practice of looking at the sky , as a way of reintegrating it into daily life, provokes a process of expansion of the consciousness and of reintegration of the self in a wider level of environmental interrelation. According to the results, the occurrence of conceptual and existential changes of the world vision of the participant teachers was evident, reassuring ourselves of the idea that the interface between astronomy teaching and the practices of transpersonal psychology can contribute to the recovery of a holistic relationship between the human being and the cosmos and to inspire the arising of a more wide-ranging ethics, based on universal, impartial and sustainable values

Reflexões e contribuições para o ensino de gravitação clássica no nível médio

The subject of Classic Gravitation is part of the actual curriculum for High School in Brazil, and it is taught in the first year of that education level. This master thesis presents a research regarding the subject Classic Gravitation in High School. This research was based in two complementary guidelines of research and action. The first guideline was the analysis of 21 didactic books of physics which are the more frequently used in High School, in the city of Natal/RN. The second guideline, worked after being verified the most common deficiencies presents in the didactic books, was the elaboration, followed by a practical application, of a course suggesting how to approach that subject in the classroom. The Parâmetros Curriculares Nacionais para o Ensino Médio (National Curricular Parameters for High School PCNEM) defend that Classic Gravitation is very important in the student s formation and that its study helps the comprehension of many nature s phenomena. Because of this vision of that subject by the PCNEM, the 21 analyzed books were separated in two groups: the first one, containing 10 books, was edited before the spreading of PCNEM, and the second, with 11 books, after that spreading. Whatever the group to which the didactic books belonged, the great majority of them let that subject in a second plan; two of them even suggesting, in the teacher s orientations, that the subject Gravitation can be suppressed in case of insufficient time . These analyses points that the PCNEM had produced no changes in the conception of the authors that wrote books regarding that subject. To analyze the didactic books, we elaborated a script which was used as an analysis tool, in which we put in evidence the relative importance of the historic and philosophic contextualization of the subject, the quotidian experience of the students and the interdisciplinary approach, among other aspects. It became evident that the didactic books give very little emphasis to historic aspects of the knowledge construction, to the relations with the day-by-day questions and to the interdisciplinary character of the subject Gravitation. It calls attention the non concordance among the authors opinions regarding the necessary previous knowledge or prerequisites the students should fulfill in order to begin to study Gravitation. The course we elaborated was given to a group of teachers as well as to students. In those courses we treated theoretical and practical aspects and emphasized historical questions and the ones which are related to people s daily life. The course for teachers was realized as an extra-mural activity of the UFRN and was given by the author of this thesis at the Escola Estadual Francisco Ivo Cavalcanti (a state public school in Natal/RN). There were 23 teachers present, from several public schools and several fields of knowledge. The thesis supervisor and the master degree s colleagues of the author acted as collaborators , reporting the participants opinions and speeches. The course to the students, on the other hand, had the participation of 300 regular students who belonged to 6 different 1st year classes of the High School Escola Marista de Natal (RN), in which the author acts as a physics teacher. The student s course was realized as part of the regular curriculum activities, in which three classes stood under the responsibility of the author and other three classes in charge of another Marista s teacher, who participated as a collaborator . The teacher s course as well as the students one were given in two stages, with five hours each. The first stage was divided in two moments, the first one focused on the survey of the spontaneous conceptions about gravitation, in which we worked basically with experiments of free throwing and pendulum, and the second one focused in theoretical presentations and quarrels about universe s models. In the second stage of the course we improved the study of Kepler s laws and the Newton s Universal Gravitation law, and we used as motivating tools some practices involving the construction of the solar system in scale. As instruments for evaluating both courses we used questionnaires and reported the speeches with participants opinions, beyond usual written evaluations in the course for the students. The teachers who participated in the course showed very good wills in realizing interdisciplinary practices; nevertheless, according their own speeches, they frequently came across the difficulty of how to do . From the experience we had in both courses, we conclude that the approach we propose hear to the teaching of the subject Classic Gravitation , supported on the tripod theory, practice and historical and philosophical aspects, is viable and effective. One hopes that this research may contribute in the formation of a opinion, among the teachers, concerning how to approach the subject of Classic Gravitation, and may offer suggestions in order those who want to apply that approach may develop classroom practices aiming to improve the teaching of that subject, which has a singular importance in the formation of High School students

Desenvolvimento de um programa de ensino de Física Térmica para o nível médio

Neste trabalho de mestrado, detemos nossa pesquisa na elaboração e implementação de planos de aula, que pudessem contribuir para estimular a participação e o interesse dos alunos nas aulas de física. Utilizamos como principal recurso didático, textos provenientes da Internet, que proporcionasse aos estudantes acesso a leitura envolvendo conteúdos científicos, tentando amenizar a falta de qualquer forma de material didático de ciências para os alunos. Pudemos constatar também, deficiências por parte dos educandos, em atividades que envolviam leitura e interpretação de textos, o que nos preocupou bastante enquanto educador e nos motivou a provocar mudanças neste quadro. As atividades aqui propostas foram elaboradas e aplicadas numa turma do segundo ano do nível médio, atendendo conteúdos de física térmica mas com um enfoque interdisciplinar. Cada plano de aula proporcionou participação ativa de cada estudante, seja na realização de tarefas solicitadas ou na participação de discussões em sala de aula. Os resultados mais expressivos desta pesquisa foram aumento na participação dos alunos nas atividades fora e dentro da classe e uma mudança na forma de pensar e elaborar soluções para determinados problemas