From environmental concerns towards sustainable food provisioning. : Material flow and food consumption scenario studies on sustainability of agri-food systems

Agriculture is an economic activity that heavily relies on the availability of natural resources. Through its role in food production agriculture is a major factor affecting public welfare and health, and its indirect contribution to gross domestic product and employment is significant. Agriculture also contributes to numerous ecosystem services through management of rural areas. However, the environmental impact of agriculture is considerable and reaches far beyond the agroecosystems. The questions related to farming for food production are, thus, manifold and of great public concern. Improving environmental performance of agriculture and sustainability of food production, sustainabilizing food production, calls for application of wide range of expertise knowledge. This study falls within the field of agro-ecology, with interphases to food systems and sustainability research and exploits the methods typical of industrial ecology. The research in these fields extends from multidisciplinary to interdisciplinary and transdisciplinary, a holistic approach being the key tenet. The methods of industrial ecology have been applied extensively to explore the interaction between human economic activity and resource use. Specifically, the material flow approach (MFA) has established its position through application of systematic environmental and economic accounting statistics. However, very few studies have applied MFA specifically to agriculture. The MFA approach was used in this thesis in such a context in Finland. The focus of this study is the ecological sustainability of primary production. The aim was to explore the possibilities of assessing ecological sustainability of agriculture by using two different approaches. In the first approach the MFA-methods from industrial ecology were applied to agriculture, whereas the other is based on the food consumption scenarios. The two approaches were used in order to capture some of the impacts of dietary changes and of changes in production mode on the environment. The methods were applied at levels ranging from national to sector and local levels. Through the supply-demand approach, the viewpoint changed between that of food production to that of food consumption. The main data sources were official statistics complemented with published research results and expertise appraisals. MFA approach was used to define the system boundaries, to quantify the material flows and to construct eco-efficiency indicators for agriculture. The results were further elaborated for an input-output model that was used to analyse the food flux in Finland and to determine its relationship to the economy-wide physical and monetary flows. The methods based on food consumption scenarios were applied at regional and local level for assessing feasibility and environmental impacts of relocalising food production. The approach was also used for quantification and source allocation of greenhouse gas (GHG) emissions of primary production. GHG assessment provided, thus, a means of crosschecking the results obtained by using the two different approaches. MFA data as such or expressed as eco-efficiency indicators, are useful in describing the overall development. However, the data are not sufficiently detailed for identifying the hot spots of environmental sustainability. Eco-efficiency indicators should not be bluntly used in environmental assessment: the carrying capacity of the nature, the potential exhaustion of non-renewable natural resources and the possible rebound effect need also to be accounted for when striving towards improved eco-efficiency. The input-output model is suitable for nationwide economy analyses and it shows the distribution of monetary and material flows among the various sectors. Environmental impact can be captured only at a very general level in terms of total material requirement, gaseous emissions, energy consumption and agricultural land use. Improving environmental performance of food production requires more detailed and more local information. The approach based on food consumption scenarios can be applied at regional or local scales. Based on various diet options the method accounts for the feasibility of re-localising food production and environmental impacts of such re-localisation in terms of nutrient balances, gaseous emissions, agricultural energy consumption, agricultural land use and diversity of crop cultivation. The approach is applicable anywhere, but the calculation parameters need to be adjusted so as to comply with the specific circumstances. The food consumption scenario approach, thus, pays attention to the variability of production circumstances, and may provide some environmental information that is locally relevant. The approaches based on the input-output model and on food consumption scenarios represent small steps towards more holistic systemic thinking. However, neither one alone nor the two together provide sufficient information for sustainabilizing food production. Environmental performance of food production should be assessed together with the other criteria of sustainable food provisioning. This requires evaluation and integration of research results from many different disciplines in the context of a specified geographic area. Foodshed area that comprises both the rural hinterlands of food production and the population centres of food consumption is suggested to represent a suitable areal extent for such research. Finding a balance between the various aspects of sustainability is a matter of optimal trade-off. The balance cannot be universally determined, but the assessment methods and the actual measures depend on what the bottlenecks of sustainability are in the area concerned. These have to be agreed upon among the actors of the area

Enzymatic cross-linking of β-casein and its impact on digestibility and allergenicity

Protein modification via enzymatic cross-linking is an attractive way for altering food structure so as to create products with increased quality and nutritional value. These modifications are expected to affect not only the structure and physico-chemical properties of proteins but also their physiological characteristics, such as digestibility in the GI-tract and allergenicity. Protein cross-linking enzymes such as transglutaminases are currently commercially available, but also other types of cross-linking enzymes are being explored intensively. In this study, enzymatic cross-linking of β-casein, the most abundant bovine milk protein, was studied. Enzymatic cross-linking reactions were performed by fungal Trichoderma reesei tyrosinase (TrTyr) and the performance of the enzyme was compared to that of transglutaminase from Streptoverticillium mobaraense (Tgase). Enzymatic cross-linking reactions were followed by different analytical techniques, such as size exclusion chromatography -Ultra violet/Visible multi angle light scattering (SEC-UV/Vis-MALLS), phosphorus nuclear magnetic resonance spectroscopy (31P-NMR), atomic force (AFM) and matrix-assisted laser desorption/ionisation-time of flight mass spectrometry (MALDI-TOF MS). The research results showed that in both cases cross-linking of β-casein resulted in the formation of high molecular mass (MM ca. 1 350 kg mol-1), disk-shaped nanoparticles when the highest enzyme dosage and longest incubation times were used. According to SEC-UV/Vis-MALLS data, commercial β-casein was cross-linked almost completely when TrTyr and Tgase were used as cross-linking enzymes. In the case of TrTyr, high degree of cross-linking was confirmed by 31P-NMR where it was shown that 91 % of the tyrosine side-chains were involved in the cross-linking. The impact of enzymatic cross-linking of β-casein on in vitro digestibility by pepsin was followed by various analytical techniques. The research results demonstrated that enzymatically cross-linked β-casein was stable under the acidic conditions present in the stomach. Furthermore, it was found that cross-linked β-casein was more resistant to pepsin digestion when compared to that of non modified β-casein. The effects of enzymatic cross-linking of β-casein on allergenicity were also studied by different biochemical test methods. On the basis of the research results, enzymatic cross-linking decreased allergenicity of native β-casein by 14 % when cross-linked by TrTyr and by 6 % after treatment by Tgase. It can be concluded that in addition to the basic understanding of the reaction mechanism of TrTyr on protein matrix, the research results obtained in this study can have high impact on various applications like food, cosmetic, medical, textile and packing sectors.

The role of selected non-timber forest products for rural areas in Laos: Case studies in Ban Napo and Ban Kouay communities

Non-timber forest products (NTFPs) are one of the major income sources for the rural population of Laos. An exploratory study was conducted to determine the role of non-timber forest products for rural communities of the study area. The study was carried out in two villages viz. Ban Napo and Ban Kouay of Sangthong district between January and March 2010. A semi-structured questionnaire was used to gather data from the respondents. Twenty-five respondents from each village were chosen based on their involvement in NTFPs collection and marketing activities. Statistically significant NTFPs income differences were not found between the villages and age groups of the respondents, however, significant differences were found in the annual incomes between farms size of the respondents. This study also analyzed the value chain structure of the three (See khai’ ton, Bamboo mats and Incense sticks) important non-timber forest products and the interactions between the actors in the case study areas. Barriers to entry the market, governance and upgrading possibilities have been discussed for each of the value chains. Comparison of unit prices at different levels of the value chains indicated uneven income distribution in favour of the intermediaries, factories and foreign buyers. The lack of capital, marketing information and negotiation skills restricted the villagers to increase their income. However, all the respondents have shown their satisfaction with their income from NTFPs.

Adhesion,Presence and Antifouling of Deinococcus geothermalis in Paper Machine Environment

This thesis has two items: biofouling and antifouling in paper industry. Biofouling means unwanted microbial accumulation on surfaces causing e.g. disturbances in industrial processes, contamination of medical devices or of water distribution networks. Antifouling focuses on preventing accumulation of the biofilms in undesired places. Deinococcus geothermalis is a pink-pigmented, thermophilic bacterium, and extremely resistant towards radiation, UV-light and desiccation and known as a biofouler of paper machines forming firm and biocide resistant biofilms on the stainless steel surfaces. The compact structure of biofilm microcolonies of D. geothermalis E50051 and the adhesion into abiotic surfaces were investigated by confocal laser scanning microscope combined with carbohydrate specific fluorescently labelled lectins. The extracellular polymeric substance in D. geothermalis microcolonies was found to be a composite of at least five different glycoconjugates contributing to adhesion, functioning as structural elements, putative storages for water, gliding motility and likely also to protection. The adhesion threads that D. geothermalis seems to use to adhere on an abiotic surface and to anchor itself to the neighbouring cells were shown to be protein. Four protein components of type IV pilin were identified. In addition, the lectin staining showed that the adhesion threads were covered with galactose containing glycoconjugates. The threads were not exposed on planktic cells indicating their primary role in adhesion and in biofilm formation. I investigated by quantitative real-time PCR the presence of D. geothermalis in biofilms, deposits, process waters and paper end products from 24 paper and board mills. The primers designed for doing this were targeted to the 16S rRNA gene of D. geothermalis. We found D. geothermalis DNA from 9 machines, in total 16 samples of the 120 mill samples searched for. The total bacterial content varied in those samples between 107 to 3 ×1010 16S rRNA gene copies g-1. The proportion of D. geothermalis in those same samples was minor, 0.03 1.3 % of the total bacterial content. Nevertheless D. geothermalis may endanger paper quality as its DNA was shown in an end product. As an antifouling method towards biofilms we studied the electrochemical polarization. Two novel instruments were designed for this work. The double biofilm analyzer was designed for search for a polarization program that would eradicate D. geothermalis biofilm or from stainless steel under conditions simulating paper mill environment. The Radbox instrument was designed to study the generation of reactive oxygen species during the polarization that was effective in antifouling of D. geothermalis. We found that cathodic character and a pulsed mode of polarization were required to achieve detaching D. geothermalis biofilm from stainless steel. We also found that the efficiency of polarization was good on submerged, and poor on splash area biofilms. By adding oxidative biocides, bromochloro-5,5-dimethylhydantoin, 2,2-dibromo-2-cyanodiacetamide or peracetic acid gave additive value with polarization, being active on splash area biofilms. We showed that the cathodically weighted pulsed polarization that was active in removing D. geothermalis was also effective in generation of reactive oxygen species. It is possible that the antifouling effect relied on the generation of ROS on the polarized steel surfaces. Antifouling method successful towards D. geothermalis that is a tenacious biofouler and possesses a high tolerance to oxidative stressors could be functional also towards other biofoulers and applicable in wet industrial processes elsewhere.

Chromatographic separation, fractionation and oxidation of selected beta-lactoglobulin peptides

The literature review elucidates the mechanism of oxidation in proteins and amino acids and gives an overview of the detection and analysis of protein oxidation products as well as information about ?-lactoglobulin and studies carried out on modifications of this protein under certain conditions. The experimental research included the fractionation of the tryptic peptides of ?-lactoglobulin using preparative-HPLC-MS and monitoring the oxidation process of these peptides via reverse phase-HPLC-UV. Peptides chosen to be oxidized were selected with respect to their amino acid content which were susceptible to oxidation and fractionated according to their m/z values. These peptides were: IPAVFK (m/z 674), ALPMHIR (m/z 838), LIVTQTMK (m/z 934) and VLVLDTDYK (m/z 1066). Even though it was not possible to solely isolate the target peptides due to co-elution of various fractions, the percentages of target peptides in the samples were satisfactory to carry out the oxidation procedure. IPAVFK and VLVLDTDYK fractions were found to yield the oxidation products reviewed in literature, however, unoxidized peptides were still present in high amounts after 21 days of oxidation. The UV data at 260 and 280 nm enabled to monitor both the main peptides and the oxidation products due to the absorbance of aromatic side-chains these peptides possess. ALPMHIR and LIVTQTMK fractions were oxidatively consumed rapidly and oxidation products of these peptides were observed even on day 0. High rates of depletion of these peptides were acredited to the presence of His (H) and sulfur-containing side-chains of Met (M). In conclusion, selected peptides hold the potential to be utilized as marker peptides in ?-lactoglobulin oxidation.

Hiekkatympösen (Hebeloma cylindrosporum) L-aminohappo-oksidaasi -geenin eristäminen

Pohjoisella havumetsävyöhykkeellä typpi on usein kasvien kasvua rajoittava tekijä. Metsämaan typpivarannot koostuvat pääasiassa orgaaniseen ainekseen sitoutuneista typpiyhdisteistä, erityisesti aminohapoista. Ektomykorritsasienet osallistuvat metsämaassa tapahtuvaan typenkiertoon hajottamalla orgaanisia typpiyhdisteitä ja kuljettamalla niitä kasvien käytettäväksi. Sienisolun sisällä tapahtuvasta aminohappojen mineralisaatiosta tiedetään toistaiseksi melko vähän. Aminohappo-oksidaasit katalysoivat aminohappojen mineralisaatiota. Eräissä ektomykorritsaa muodostavien kantasienten suvuissa on osoitettu L-aminohappo-oksidaaseja (LAO). Toistaiseksi LAO-geeniä ei tunneta kantasienistä. Työssä kuvattiin ensimmäistä kertaa LAO-geeni kantasienistä. Hiekkatympösen LAO1- geenin cDNA:n 5´ ja 3´ päiden emäsjärjestykset määritettiin RACE-PCR -menetelmällä, josta saatujen sekvenssien perusteella suunniteltiin alukkeet koko geenin cDNA:n ja genomisen DNA:n monistamiseksi. Genomisen DNA ja cDNA -sekvenssien perusteella määritettiin hiekkatympösen LAO1-geenin rakenne. Hiekkatympösen LAO1-geeni koostuu viidestä eksonista ja neljästä intronista. Hiekkatympösen LAO1-geenin yläpuoliselta alueelta löydettiin typpimetabolian säätelyyn osallistuvan proteiinin sitoutumiskohta. LAO1-geeniä edeltävä geenin osittainen genominen DNA-sekvenssi määritettiin. Kangaslohisienen genomissa LAO1-geeniä edeltävä geeni oli ennustettu pyruvaattidekarboksylaasiksi. Lisäksi työssä määritettiin hiekkatympösen toisen LAOhomologin cDNA:n osittainen emäsjärjestys. Työssä tunnistettiin myös toisen kantasienen, kangaslohisienen, LAO-geeni. LAO-geeniksi tunnistettu kangaslohisienen geenimalli oli aiemmin ennustettu NCBI:n tietokannassa toiminnaltaan tuntemattomaksi proteiiniksi. Proteiinien sukupuun perusteella hiekkatympösen ja kangaslohisienen LAO:n kantamuoto on kahdentunut. Työstä saatu tutkimustulos tuo täysin uutta tietoa molekyylibiologian tasolla ektomykorritsasienten aminohappojen katabolisista reaktioista. Aminohappojen mineralisaation seurauksen muodostuneet ammoniumionit saattavat olla merkittävä typen lähde myös maan muille mikrobeille ja kasveille. On mahdollista, että ektomykorritsasienten LAO-entsyymi on yksi merkittävä tekijä metsämaan typenkierrossa.

The connection between on-farm assessed welfare (A-index) and production parameters of the sows

Tämän tutkimuksen tavoitteena oli selvittää tilalla määritetyn hyvinvoinnin yhteyttä emakoiden tuotantotuloksiin. Hyvinvointia arvioitiin suomalaisen hyvinvointi-indeksin, A-indeksi, avulla. Tuotantotuloksina käytettiin kahta erilaista tuotosaineistoa, jotka molemmat pohjautuivat kansalliseen tuotosseuranta aineistoon. Hyvinvointimääritykset tehtiin 30 porsastuotantosikalassa maaliskuun 2007 aikana. A-indeksi koostuu kuudesta kategoriasta ’liikkumismahdollisuudet’, ’alustan ominaisuudet’, ’sosiaaliset kontaktit’, ’valo, ilma ja melu’, ’ruokinta ja veden saanti’ sekä ’eläinten terveys ja hoidon taso’. Jokaisessa kategoriassa on 3-10 pääosin ympäristöperäistä muuttujaa, jotka vaihtelevat osastoittain. Maksimipistemäärä osastolle on 100. Hyvinvointimittaukset tehtiin porsitus-, tiineytys- ja joutilasosastoilla. Erillisten tiineytysosastojen pienen lukumäärän takia (n=7) tilakohtaiset tiineytys- ja joutilasosastopisteet yhdistettiin ja keskiarvoja käytettiin analyyseissä. Yhteyksiä tuotokseen tutkittiin kahden eri aineiston avulla 1) Tilaraportti aineisto (n=29) muodostuu muokkaamattomista tila- ja tuotostuloksista tilavierailua edeltävän vuoden ajalta, 2) POTSIaineisto (n=30) muodostuu POTSI-ohjelmalla (MTT) muokatusta tuotantoaineistosta, joka sisältää managementtiryhmän (tila, vuosi, vuodenaika) vaikutuksen ensikoiden ja emakoiden pahnuekohtaiseen tuotokseen. Yhteyksiä analysointiin korrelaatio- ja regressioanalyysien avulla. Vaikka osallistuminen tutkimukseen oli vapaaehtoista, molempien tuotantoaineistojen perusteella tutkimustilat edustavat keskituottoista suomalaista sikatilaa. A-indeksin kokonaispisteet vaihtelivat välillä 37,5–64,0 porsitusosastolla ja 39,5–83,5 joutilasosastolla. Tilaraporttiaineistoa käytettäessä paremmat pisteet porsitusosaston ’eläinten terveys ja hoidon taso’ -kategoriasta lyhensivät eläinten lisääntymissykliä, lisäsivät syntyvien pahnueiden ja porsaiden määrää sekä alensivat kuolleena syntyneiden lukumäärää. Regressiomallin mukaan ’eläinten terveys ja hoidon taso’ -kategoria selitti syntyvien porsaiden lukumäärän, porsimisvälin pituuden sekä keskiporsimiskerran vaihtelua. Paremmat pisteet joutilasosaston ’liikkumismahdollisuudet’ kategoriasta alensivat syntyneiden pahnueiden sekä syntyneiden että vieroitettujen porsaiden lukumäärää. Regressiomallin mukaan ensikkopahnueiden osuus ja ”liikkumismahdollisuudet” kategorian pisteet selittivät vieroitettujen porsaiden lukumäärän vaihtelua. POTSI-aineiston yhteydessä kuolleena syntyneiden porsaiden lukumäärän aleneminen oli ensikoilla yhteydessä parempiin porsitusosaston ’sosiaalisiin kontakteihin’ ja emakoilla puolestaan joutilasosaston parempiin ’eläinten terveys ja hoidon taso’ pisteisiin. Kahden eri tuotantoaineiston avulla saadut tulokset erosivat toisistaan. Seuraavissa tutkimuksissa onkin suositeltavampaa käyttää Tilaraporttiaineistoja, joissa tuotokset ilmoitetaan vuosikohtaisina. Tämän tutkimuksen perusteella hyvinvoinnilla ja tuotoksella on yhteyksiä, joilla on myös merkittävää taloudellista vaikutusta. Erityisesti hyvä eläinten hoito ja eläinten terveys lisäävät tuotettujen porsaiden määrää ja lyhentävät lisääntymiskiertoa. Erityishuomiota tulee kiinnittää vapaana olevien joutilaiden emakoiden sosiaaliseen stressiin ja rehunsaannin varmistamiseen kaikille yksilöille.

Role and function of nonmuscle alpha-actinin-1 and -4 in regulating distinct subcategories of actin stress fibers in mammalian cells

Actin stress fibers are dynamic structures in the cytoskeleton, which respond to mechanical stimuli and affect cell motility, adhesion and invasion of cancer cells. In nonmuscle cells, stress fibers have been subcategorized to three distinct stress fiber types: dorsal and ventral stress fibers and transverse arcs. These stress fibers are dissimilar in their subcellular localization, connection to substratum as well as in their dynamics and assembly mechanisms. Still uncharacterized is how they differ in their function and molecular composition. Here, I have studied involvement of nonmuscle alpha-actinin-1 and -4 in regulating distinct stress fibers as well as their localization and function in human U2OS osteosarcoma cells. Except for the correlation of upregulation of alpha-actinin-4 in invasive cancer types very little is known about whether these two actinins are redundant or have specific roles. The availability of highly specific alpha-actinin-1 antibody generated in the lab, revealed localization of alpha-actinin-1 along all three categories of stress fibers while alphaactinin-4 was detected at cell edge, distal ends of stress fibers as well as perinuclear regions. Strikingly, by utilizing RNAi-mediated gene silencing of alpha-actinin-1 resulted in specific loss of dorsal stress fibers and relocalization of alpha-actinin-4 to remaining transverse arcs and ventral stress fibers. Unexpectedly, aberrant migration was not detected in cells lacking alpha-actinin-1 even though focal adhesions were significantly smaller and fewer. Whereas, silencing of alpha-actinin-4 noticeably affected overall cell migration. In summary, as part of my master thesis study I have been able to demonstrate distinct localization and functional patterns for both alpha-actinin-1 and -4. I have identified alpha-actinin-1 to be a selective dorsal stress fiber crosslinking protein as well as to be required for focal adhesion maturation, while alpha-actinin-4 was demonstrated to be fundamental for cell migration.

The effects of abiotic and biotic factors on somatic embryogenesis and seedlings of Pinus sylvestris (L.)

Somatic embryogenesis (SE) is an asexual form of plant propagation that occurs in nature and mimics many of the events of sexual reproduction. Pinus sylvestris (L.) is an important source of timber in Northern Eurasia but it is recalcitrant to somatic embryogenesis. Several factors important for the success of the P. sylvestris embryogenic cultures have not been thoroughly investigated. In this study, we examined the effects of parental genotypes on the SE in P. sylvestris, the involvement of the gaseous plant growth regulator, ethylene in SE, and also biotic effects on somatic embryos as well as on seedlings. We tested parental effects on immature embryo initiation for different media, storage periods, and on the maturation process. Maternal effects were found to be crucial for SE in the absence of paternal effects. No maternal-paternal interaction was observed at any stage of somatic embryo production. Additionally the role of ethylene at different developmental stages of SE was investigated. Two ACC synthase genes, PsACS1 and PsACS2, were isolated and characterized. PsACS1 was expressed during the proliferation stage in all tested genotypes, whereas PsACS2 was only expressed in somatic embryos of each genotype. Ethylene production in embryos at stage 3 was significantly higher than the other stages. In a parallel study, the response of somatic embryos to fungal elicitors was investigated. Three fungi, a mutualistic ectomycorrhizal (ECM) fungus (Suillus bovinus), a weak Scots pine pathogen (Heterobasidion parviporum) and a strong pathogen (H. annosum) were used. The gene expression patterns for embryos exposed to the H. parviporum elicitor were found to be similar to that documented for S. bovinus among the tested genes. By contrast somatic embryos exposed to the H. annosum elicitor had a different pattern of regulation which was marked by a delayed response, and in some cases death of the embryos. Furthermore, interaction without direct contact between P. sylvestris seedlings and microbes (mutualistic and pathogenic fungus, cyanobacterium) were investigated. Several novel genes expressed in seedlings treated with ECM fungus were isolated which suggested that physical contact is not necessary for elicitation of host responses. The results suggest that somatic embryos and seedlings of P. sylvestris are genetically well equipped to respond to fungal elicitor/exudates and could serve as a suitable model for reproducible molecular studies in conifer tree patho- and symbiotic systems.

Consumption in Rural Bangladesh : Households, Lifestyles, and Identities

Bangladesh, often better known to the outside world as a country of natural calamities, is one of the most densely populated countries in the world. Despite rapid urbanization, more than 75% of the people still live in rural areas. The density of the rural population is also one of the highest in the world. Being a poor and low-income country, its main challenge is to eradicate poverty through increasing equitable income. Since its independence in 1971, Bangladesh has experienced many ups and downs, but over the past three decades, its gross domestic product (GDP) has grown at an impressive rate. Consequently, the country s economy is developing and the country has outperformed many low-income countries in terms of several social indicators. Bangladesh has achieved the Millennium Development Goal (MDG) of eliminating gender disparity in primary and secondary school enrollment. A sharp decline in child and infant mortality rates, increased per capita income, and improved food security have placed Bangladesh on the track to achieving in the near future the status of a middle-income country. All these developments have influenced the consumption pattern of the country. This study explores the consumption scenario of rural Bangladesh, its changing consumption patterns, the relationship between technology and consumption in rural Bangladesh, cultural consumption in rural Bangladesh, and the myriad reasons why consumers nevertheless feel compelled to consume chemically treated foods. Data were collected in two phases in the summers of 2006 and 2008. In 2006, the empirical data were collected from the following three sources: interviews with consumers, producers/sellers, and doctors and pharmacists; observations of sellers/producers; and reviews of articles published in the national English and Bengali (the national language of Bangladesh) daily newspapers. A total of 110 consumers, 25 sellers/producers, 7 doctors, and 7 pharmacists were interviewed and observed. In 2008, data were collected through semi-structured in-depth qualitative interviews, ethnography, and unstructured conversations substantiated by secondary sources and photographs; the total number of persons interviewed was 22. -- Data were also collected on the consumption of food, clothing, housing, education, medical facilities, marriage and dowry, the division of labor, household decision making, different festivals such as Eid (for Muslims), the Bengali New Year, and Durga puja (for Hindus), and leisure. Qualitative methods were applied to the data analysis and were supported by secondary quantitative data. The findings of this study suggest that the consumption patterns of rural Bangladeshis are changing over time along with economic and social development, and that technology has rendered aspects of daily life more convenient. This study identified the perceptions and experiences of rural people regarding technologies in use and explored how culture is associated with consumption. This study identified the reasons behind the use of hazardous chemicals (e.g. calcium carbide, sodium cyclamate, cyanide and formalin, etc.) in foods as well as the extent to which food producers/sellers used such chemicals. In addition, this study assessed consumer perceptions of and attitudes toward these contaminated food items and explored how adulterated foods and food stuffs affect consumer health. This study also showed that consumers were aware that various foods and food stuffs contained hazardous chemicals, and that these adulterated foods and food stuffs were harmful to their health.