LCD-OpenPACS: sistema integrado de telerradiologia com auxílio ao diagnóstico de nódulos pulmonares em exames de tomografia computadorizada

Lung cancer is one of the most common types of cancer and has the highest mortality rate. Patient survival is highly correlated with early detection. Computed Tomography technology services the early detection of lung cancer tremendously by offering aminimally invasive medical diagnostic tool. However, the large amount of data per examination makes the interpretation difficult. This leads to omission of nodules by human radiologist. This thesis presents a development of a computer-aided diagnosis system (CADe) tool for the detection of lung nodules in Computed Tomography study. The system, called LCD-OpenPACS (Lung Cancer Detection - OpenPACS) should be integrated into the OpenPACS system and have all the requirements for use in the workflow of health facilities belonging to the SUS (Brazilian health system). The LCD-OpenPACS made use of image processing techniques (Region Growing and Watershed), feature extraction (Histogram of Gradient Oriented), dimensionality reduction (Principal Component Analysis) and classifier (Support Vector Machine). System was tested on 220 cases, totaling 296 pulmonary nodules, with sensitivity of 94.4% and 7.04 false positives per case. The total time for processing was approximately 10 minutes per case. The system has detected pulmonary nodules (solitary, juxtavascular, ground-glass opacity and juxtapleural) between 3 mm and 30 mm.

Núcleos de acessibilidade e o atendimento a alunos com necessidades educacionais especiais nas universidades federais do nordeste brasileiro

In the current context of policies for inclusiveness in the Brazilian higher education, the accessibility centers are responsible for the organization of actions toward the fulfillment of the legal requirements regarding accessibility and the elimination of barriers that interfere with the participation and learning of persons with special learning needs (SLN), providing conditions for the full inclusion of these students in the activities of learning, research and community outreach in this learning level. This research had the goal to analyse the work developed by the accessibility centers in the federal universities in the northeastern region of Brazil towards the care of students with SLN. It is a descriptive work, with quantitative and qualitative approaches. Twelve federal universities participated through their accessibility center’s coordinators. The data - gathered by means of an electronic survey filled out in 2014 - was organized and analyzed through descriptive statistics and content analysis; their discussion was made around four topics: organization of accessibility centers for the care of students with SLN, kinds and numbers of students with SLN cared for, actions developed, and suggestions for the improvement of the accessibility centers. It was found that in the sphere of the researched universities, the accessibility centers have been taking actions involving many parts of the academic community towards the improvement of the conditions and permanence of students with SLN. However, in some institutional realities, these action need to be expanded and/or consolidated. The coordinators suggest further actions towards the betterment of these centers, regarding expansion of financial and human resources, professional qualification, awareness of the academic community, institutionalization and the formation of a collaborative network among the accessibility centers. Thus, although there are still challenges to overcome, the presence of the accessibility centers is shown to advance the realization of policies for the inclusion of students with SLN in the post-secondary education, towards the democratization of learning starting from the universal right to education.

Núcleos de acessibilidade e o atendimento a alunos com necessidades educacionais especiais nas universidades federais do nordeste brasileiro

In the current context of policies for inclusiveness in the Brazilian higher education, the accessibility centers are responsible for the organization of actions toward the fulfillment of the legal requirements regarding accessibility and the elimination of barriers that interfere with the participation and learning of persons with special learning needs (SLN), providing conditions for the full inclusion of these students in the activities of learning, research and community outreach in this learning level. This research had the goal to analyse the work developed by the accessibility centers in the federal universities in the northeastern region of Brazil towards the care of students with SLN. It is a descriptive work, with quantitative and qualitative approaches. Twelve federal universities participated through their accessibility center’s coordinators. The data - gathered by means of an electronic survey filled out in 2014 - was organized and analyzed through descriptive statistics and content analysis; their discussion was made around four topics: organization of accessibility centers for the care of students with SLN, kinds and numbers of students with SLN cared for, actions developed, and suggestions for the improvement of the accessibility centers. It was found that in the sphere of the researched universities, the accessibility centers have been taking actions involving many parts of the academic community towards the improvement of the conditions and permanence of students with SLN. However, in some institutional realities, these action need to be expanded and/or consolidated. The coordinators suggest further actions towards the betterment of these centers, regarding expansion of financial and human resources, professional qualification, awareness of the academic community, institutionalization and the formation of a collaborative network among the accessibility centers. Thus, although there are still challenges to overcome, the presence of the accessibility centers is shown to advance the realization of policies for the inclusion of students with SLN in the post-secondary education, towards the democratization of learning starting from the universal right to education.

O eterno retorno como paródia e como colagem na filosofia da diferença de Gilles Deleuze

Gilles Deleuze hás commented on many philosophers, but his relationship with Nietzsche plays a singular role in his thought: appropriating the concept of the “eternal return” to think the central axis of his thesis, Difference and repetition (1968). Terms “difference” and “repetition” appeared associated to eternal return in his Nietzsche and philosophy (1962). Our dissertation thesis analyzes the presentations of that concept in bothworks. Chapter one presents the style construction and critical, methodological aspects of Nietzschean philosophy, fundamental elements to understand Deleuze’s interpretation. It subsequently analyzes the first presentation of that concept, expressed in the following terms: the aesthetic existence, either innocent or justified from the figure of game. We will see how the image of game implies another concept of chance, that leads Deleuze to think of an affirmative philosophical “type”, capable of creating new values. Chapter two evaluates the existential, “ethical-selective”, “physicalcosmological” character of the concept of eternal return, as much as the difficulties it imposes upon Nietzsche’s interpreter. We present afterwards Deleuzian comprehension of eternal return as a “parody” or a “simulacrum of doctrine”. Chapter three analyzes that interpretive position as a transvaluation of values from a rearrange of perspectives in order to overcome the negative comprehensions of existence. We want to question the way Deleuze builds another image of thought from the concept of eternal return – an image that, by a sort of “colagem” and selective elimination of the negativity, proposes a historiographic work and unfolds a lineage of thinkers of immanence and difference, a detour from the thought of identity, the same and the similar. We want thus to understand Deleuze’s critique of “dogmatic image of thought”.

O eterno retorno como paródia e como colagem na filosofia da diferença de Gilles Deleuze

Gilles Deleuze hás commented on many philosophers, but his relationship with Nietzsche plays a singular role in his thought: appropriating the concept of the “eternal return” to think the central axis of his thesis, Difference and repetition (1968). Terms “difference” and “repetition” appeared associated to eternal return in his Nietzsche and philosophy (1962). Our dissertation thesis analyzes the presentations of that concept in bothworks. Chapter one presents the style construction and critical, methodological aspects of Nietzschean philosophy, fundamental elements to understand Deleuze’s interpretation. It subsequently analyzes the first presentation of that concept, expressed in the following terms: the aesthetic existence, either innocent or justified from the figure of game. We will see how the image of game implies another concept of chance, that leads Deleuze to think of an affirmative philosophical “type”, capable of creating new values. Chapter two evaluates the existential, “ethical-selective”, “physicalcosmological” character of the concept of eternal return, as much as the difficulties it imposes upon Nietzsche’s interpreter. We present afterwards Deleuzian comprehension of eternal return as a “parody” or a “simulacrum of doctrine”. Chapter three analyzes that interpretive position as a transvaluation of values from a rearrange of perspectives in order to overcome the negative comprehensions of existence. We want to question the way Deleuze builds another image of thought from the concept of eternal return – an image that, by a sort of “colagem” and selective elimination of the negativity, proposes a historiographic work and unfolds a lineage of thinkers of immanence and difference, a detour from the thought of identity, the same and the similar. We want thus to understand Deleuze’s critique of “dogmatic image of thought”.

Qualidade de vida de pessoas com estomias intestinais

Ostomy is an open surgical origin, when it is necessary to deviate temporarily or permanently, the normal transit of food and / or deletions. The patient with ostomy disposal is faced with changes in their physiology, also emerging on the need to care collection bag. This study aimed to analyze the quality of life (QOL) of people living with ostomy Intestinal (EI), who attended the Pediatric and Adult Rehabilitation Center of Rio Grande do Norte (CRI / CRA-RN). It is an analytical study with cross-sectional design and quantitative approach, accomplished with 89 people who had EI. The study was approved by the Ethics Committee of the Federal University of Rio Grande do Norte (CEP / UFRN), CAAE: 19866413.3.0000.5537. Held data collection in the period January-March 2015 using two instruments: an adapted general questionnaire covering socio-demographic, clinical and self-care and a specific instrument for assessing QOL of people with stoma titled as City of Hope Quality of Life - Ostomy Questionnaire (COH-QOL-Q), validated and adapted to Portuguese in 2010, composed of four areas, namely: Welfare Body (BEF), Welfare Psychological (BEP), Welfare (BES ) and Spiritual Well-Being (BEE). The collected data were entered into a database in Microsoft Excel 2007 spreadsheet application and processed in computerized software for descriptive and inferential analysis. The results showed that 83.1% had a colostomy and ileostomy 16.9%. Sociodemographic characteristics prevailed in males (57.3%), over 50 (57.3%), mulatto (46.1%), with presence of companion / a (57.3%), retired / beneficiaries (50.5%), monthly income above the minimum wage (68.5%) and who have studied up to elementary school (67.4%). Regarding clinical aspects, it was observed that the main cause that led to the making of the stoma was the neoplasm (59.6%) followed by trauma (21.3%). The sample showed people with stoma for more than six months (79.8%) of permanently (57.3%), in use sink equipment piece drainable (68.5%) of flat base (82.0%). With respect to self-care, 93.3% emptied and washed the bag alone (care related to hygiene) and 75.3% fixed the new exchange on the skin during the exchange (care related to the stock). Patients with more than six months of ostomy and had no partner (a) had higher averages of self-care related hygiene and purse. The average of respondents QoL scores was 68.90% for General QOL; 68.03% for the BEF; 68.38% for the BEP; 66.46% for BES and 75.41% for BEE. Among the aspects that influenced QOL included: physical strength, pain, suffering and gases (physical domain); appearance, care of the stoma and adaptation to new condition (psychological domain); isolation, interference in personal relationships and social activities (social domain) and going to church or synagogue, spiritual activities and positive change after ostomy (spiritual realm). Based on these results, it is concluded that this was a predominantly adult sample / elderly (between 50 and 70 years), with low education and the cause motivating the stoma, neoplasms. However, such findings did not pass at low percentage levels on the self-care capacity to deliver even at low QOL scores.

Qualidade de vida de pessoas com estomias intestinais

Ostomy is an open surgical origin, when it is necessary to deviate temporarily or permanently, the normal transit of food and / or deletions. The patient with ostomy disposal is faced with changes in their physiology, also emerging on the need to care collection bag. This study aimed to analyze the quality of life (QOL) of people living with ostomy Intestinal (EI), who attended the Pediatric and Adult Rehabilitation Center of Rio Grande do Norte (CRI / CRA-RN). It is an analytical study with cross-sectional design and quantitative approach, accomplished with 89 people who had EI. The study was approved by the Ethics Committee of the Federal University of Rio Grande do Norte (CEP / UFRN), CAAE: 19866413.3.0000.5537. Held data collection in the period January-March 2015 using two instruments: an adapted general questionnaire covering socio-demographic, clinical and self-care and a specific instrument for assessing QOL of people with stoma titled as City of Hope Quality of Life - Ostomy Questionnaire (COH-QOL-Q), validated and adapted to Portuguese in 2010, composed of four areas, namely: Welfare Body (BEF), Welfare Psychological (BEP), Welfare (BES ) and Spiritual Well-Being (BEE). The collected data were entered into a database in Microsoft Excel 2007 spreadsheet application and processed in computerized software for descriptive and inferential analysis. The results showed that 83.1% had a colostomy and ileostomy 16.9%. Sociodemographic characteristics prevailed in males (57.3%), over 50 (57.3%), mulatto (46.1%), with presence of companion / a (57.3%), retired / beneficiaries (50.5%), monthly income above the minimum wage (68.5%) and who have studied up to elementary school (67.4%). Regarding clinical aspects, it was observed that the main cause that led to the making of the stoma was the neoplasm (59.6%) followed by trauma (21.3%). The sample showed people with stoma for more than six months (79.8%) of permanently (57.3%), in use sink equipment piece drainable (68.5%) of flat base (82.0%). With respect to self-care, 93.3% emptied and washed the bag alone (care related to hygiene) and 75.3% fixed the new exchange on the skin during the exchange (care related to the stock). Patients with more than six months of ostomy and had no partner (a) had higher averages of self-care related hygiene and purse. The average of respondents QoL scores was 68.90% for General QOL; 68.03% for the BEF; 68.38% for the BEP; 66.46% for BES and 75.41% for BEE. Among the aspects that influenced QOL included: physical strength, pain, suffering and gases (physical domain); appearance, care of the stoma and adaptation to new condition (psychological domain); isolation, interference in personal relationships and social activities (social domain) and going to church or synagogue, spiritual activities and positive change after ostomy (spiritual realm). Based on these results, it is concluded that this was a predominantly adult sample / elderly (between 50 and 70 years), with low education and the cause motivating the stoma, neoplasms. However, such findings did not pass at low percentage levels on the self-care capacity to deliver even at low QOL scores.

Estudo da produção eletroquímica de espécies de cloro ativo para tratamento de efluentes sintéticos

The treatment of wastewater is essential to human health. One of the most important steps is the disinfection treatment which uses chlorine to eliminate bacteria as required by environmental agencies. However, the identification of potentially toxic byproducts generated by this method, such as trihalomethanes, has stimulated the development of new alternative disinfection technologies. Among them, heterogeneous photocatalysis, TiO2 photocatalysis and electrochemical disinfection are considered suitable alternatives to the chlorination method. Thus, the present dissertation analyzes the evolution of active chlorine species in a synthetic NaCl solution and it is tested to treat a synthetic solution of the dye Reactive Blue 19 using boron-doped diamond (BDD) and ruthenium oxide (Ti/Ru0.3Ti0.7O2) as anodes. The indirect electrochemical process was discussed in terms of mineralization of the total organic load and percentage of color removal in order to evaluate the applicability of electrochemical technology. Electrochemical experiments were carried out with different current densities (25, 50 and 75 mA.cm-2) during 120 minutes. On the other hand, other important parameter in this study was the influence of the proportion sp3/sp2 on BDD anode on the performance of the evolution of active chlorine species which was investigated by electrolytic techniques (linear polarization), with the intention of determining the related training oxidizing species and consumption energy to chemical or electrochemical reactions. From the results, it can be noted that the BDD electrode showed better efficiency throughout the electrochemical process.

Estudo da produção eletroquímica de espécies de cloro ativo para tratamento de efluentes sintéticos

The treatment of wastewater is essential to human health. One of the most important steps is the disinfection treatment which uses chlorine to eliminate bacteria as required by environmental agencies. However, the identification of potentially toxic byproducts generated by this method, such as trihalomethanes, has stimulated the development of new alternative disinfection technologies. Among them, heterogeneous photocatalysis, TiO2 photocatalysis and electrochemical disinfection are considered suitable alternatives to the chlorination method. Thus, the present dissertation analyzes the evolution of active chlorine species in a synthetic NaCl solution and it is tested to treat a synthetic solution of the dye Reactive Blue 19 using boron-doped diamond (BDD) and ruthenium oxide (Ti/Ru0.3Ti0.7O2) as anodes. The indirect electrochemical process was discussed in terms of mineralization of the total organic load and percentage of color removal in order to evaluate the applicability of electrochemical technology. Electrochemical experiments were carried out with different current densities (25, 50 and 75 mA.cm-2) during 120 minutes. On the other hand, other important parameter in this study was the influence of the proportion sp3/sp2 on BDD anode on the performance of the evolution of active chlorine species which was investigated by electrolytic techniques (linear polarization), with the intention of determining the related training oxidizing species and consumption energy to chemical or electrochemical reactions. From the results, it can be noted that the BDD electrode showed better efficiency throughout the electrochemical process.

Concentração do óleo de girassol em compostos insaturados utilizando destilação molecular

Vegetable oils are characterized as important raw materials in the supplying of natural substances of interest pharmaceutical, food and cosmetic industry. Sunflower oil stands out for its important composition present in unsaturated fatty acids such as oleic acid (C18:1) and linoleic (C18:2), responsible for many health benefits. The main objective of this study is obtain enriched fractions in unsaturated compounds from refined sunflower oil. The oil used in this study was characterized by the determination of some properties, like iodine number, acid number and viscosity. A transesterification was done to transform the triglycerides into their corresponding methyl esters of fatty acids. These was submitted the molecular distillation process, for present as an efficient alternative to separation and purification of these substances, using high vacuum and low temperatures. Of the esters fractions that was obtained, were analyzed by gas chromatography. The experimental design technique was used to evaluate the influence of the temperature variation of evaporation and condensation system on the percentage obtained residue. The evaporator temperature proved to be the most influential variable on the studied response. The optimized conditions for the answer was studied at 100 °C for evaporator temperature and 10 °C for the condenser temperature. The graph of "split ratio" showed that for the lowest flow feed (1 mL/min) and higher evaporator temperature (110 °C) was obtained in the largest fraction of distillate. It also used the study of the influence of evaporator temperature on the concentration of unsaturated compounds. The best operating conditions for temperature was 90 °C reached 82.21 % of unsaturated compounds. Elimination curves of the unsaturated compounds present in the distillate stream were obtained. The simulation results of the molecular distillation process of sunflower oil showed the concentration profiles for three different feed flow rates. The speed, temperature and thickness profiles of the liquid film were obtained. The speed of the film increases as the fluid flows through the walls of the evaporator, reaching a maximum on length of 0.075 m. The film thickness decreases on the route, since many compounds are volatilized. The result of the temperature profile had to be consistent with the literature reproduced, being constant after reaching the maximum operating temperature in the length of 0.15 m. This study allowed characterizing and focusing, through experimental analysis, unsaturated compounds and observing the sunflower oil´s behavior through process simulation.

Concentração do óleo de girassol em compostos insaturados utilizando destilação molecular

Vegetable oils are characterized as important raw materials in the supplying of natural substances of interest pharmaceutical, food and cosmetic industry. Sunflower oil stands out for its important composition present in unsaturated fatty acids such as oleic acid (C18:1) and linoleic (C18:2), responsible for many health benefits. The main objective of this study is obtain enriched fractions in unsaturated compounds from refined sunflower oil. The oil used in this study was characterized by the determination of some properties, like iodine number, acid number and viscosity. A transesterification was done to transform the triglycerides into their corresponding methyl esters of fatty acids. These was submitted the molecular distillation process, for present as an efficient alternative to separation and purification of these substances, using high vacuum and low temperatures. Of the esters fractions that was obtained, were analyzed by gas chromatography. The experimental design technique was used to evaluate the influence of the temperature variation of evaporation and condensation system on the percentage obtained residue. The evaporator temperature proved to be the most influential variable on the studied response. The optimized conditions for the answer was studied at 100 °C for evaporator temperature and 10 °C for the condenser temperature. The graph of "split ratio" showed that for the lowest flow feed (1 mL/min) and higher evaporator temperature (110 °C) was obtained in the largest fraction of distillate. It also used the study of the influence of evaporator temperature on the concentration of unsaturated compounds. The best operating conditions for temperature was 90 °C reached 82.21 % of unsaturated compounds. Elimination curves of the unsaturated compounds present in the distillate stream were obtained. The simulation results of the molecular distillation process of sunflower oil showed the concentration profiles for three different feed flow rates. The speed, temperature and thickness profiles of the liquid film were obtained. The speed of the film increases as the fluid flows through the walls of the evaporator, reaching a maximum on length of 0.075 m. The film thickness decreases on the route, since many compounds are volatilized. The result of the temperature profile had to be consistent with the literature reproduced, being constant after reaching the maximum operating temperature in the length of 0.15 m. This study allowed characterizing and focusing, through experimental analysis, unsaturated compounds and observing the sunflower oil´s behavior through process simulation.

Avaliação da influência de surfactantes químico e biológico na hidrólise enzimática de casca de coco verde após pré-tratamento ácido/alcalino e com peróxido de hidrogênio alcalino

In Brazil many types of bioproducts and agroindustrial waste are generated currently, such as cacashew apple bagasse and coconut husk, for example. The final disposal of these wastes causes serious environmental issues. In this sense, waste lignocellulosic content, as the shell of the coconut is a renewable and abundant raw material in which its use has an increased interest mainly for the 2nd generation ethanol production. The hydrolysis of cellulose to reducing sugars such as glucose and xylose is catalysed by a group of enzymes called cellulases. However, the main bottleneck in the enzymatic hydrolysis of cellulose is the significant deactivation of the enzyme that shows irreversible adsorption mechanism leading to reduction of the cellulose adsorption onto cellulose. Studies have shown that the use of surfactants can modify the surface property of the cellulose therefore minimizing the irreversible binding. The main objective of the present study was to evaluate the influence of chemical and biological surfactants during the hydrolysis of coconut husk which was subjected to two pre-treatment in order to improve the accessibility of the enzymes to the cellulose, removing this way, part of the lignin and hemicellulose present in the structure of the material. The pre-treatments applied to coconut bagasse were: Acid/Alkaline using 0.6M H2SO4 followed by 1M NaOH, and the one with Alkaline Hydrogen Peroxide at a concentration of 7.35% (v/v) and pH 11.5. Both the material no treatment and pretreated were characterized using analysis of diffraction X-ray (XRD), Scanning Electron Microscopy (SEM) and methods established by NREL. The influence of both surfactants, chemical and biological, was used at concentrations below the critical micelle concentration (CMC), and the concentrations equal to the CMC. The application of pre-treatment with coconut residue was efficient for the conversion to glucose, as well as for the production of total reducing sugars, it was possible to observe that the pretreatment fragmented the structure as well as disordered the fibers. Regarding XRD analysis, a significant increase in crystallinity index was observed for pretreated bagasse acid/alkali (51.1%) compared to the no treatment (31.7%), while that for that treated with PHA, the crystallinity index was slightly lower, around 29%. In terms of total reducing sugars it was not possible to observe a significant difference between the hydrolysis carried out without the use of surfactant compared to the addition of Triton and rhamnolipid. However, by observing the conversions achieved during the hydrolysis, it was noted that the best conversion was using the rhamnolipíd for the husk pretreated with acid/alkali, reaching a value of 33%, whereas using Triton the higher conversion was 23.8%. The coconut husk is a residue which can present a high potential to the 2nd generation ethanol production, being the rhamonolipid a very efficient biosurfactant for use as an adjuvant in the enzymatic process in order to act on the material structure reducing its recalcitrance and therefore improving the conditions of access for enzymes to the substrate increasing thus the conversion of cellulose to glucose.

Avaliação da influência de surfactantes químico e biológico na hidrólise enzimática de casca de coco verde após pré-tratamento ácido/alcalino e com peróxido de hidrogênio alcalino

In Brazil many types of bioproducts and agroindustrial waste are generated currently, such as cacashew apple bagasse and coconut husk, for example. The final disposal of these wastes causes serious environmental issues. In this sense, waste lignocellulosic content, as the shell of the coconut is a renewable and abundant raw material in which its use has an increased interest mainly for the 2nd generation ethanol production. The hydrolysis of cellulose to reducing sugars such as glucose and xylose is catalysed by a group of enzymes called cellulases. However, the main bottleneck in the enzymatic hydrolysis of cellulose is the significant deactivation of the enzyme that shows irreversible adsorption mechanism leading to reduction of the cellulose adsorption onto cellulose. Studies have shown that the use of surfactants can modify the surface property of the cellulose therefore minimizing the irreversible binding. The main objective of the present study was to evaluate the influence of chemical and biological surfactants during the hydrolysis of coconut husk which was subjected to two pre-treatment in order to improve the accessibility of the enzymes to the cellulose, removing this way, part of the lignin and hemicellulose present in the structure of the material. The pre-treatments applied to coconut bagasse were: Acid/Alkaline using 0.6M H2SO4 followed by 1M NaOH, and the one with Alkaline Hydrogen Peroxide at a concentration of 7.35% (v/v) and pH 11.5. Both the material no treatment and pretreated were characterized using analysis of diffraction X-ray (XRD), Scanning Electron Microscopy (SEM) and methods established by NREL. The influence of both surfactants, chemical and biological, was used at concentrations below the critical micelle concentration (CMC), and the concentrations equal to the CMC. The application of pre-treatment with coconut residue was efficient for the conversion to glucose, as well as for the production of total reducing sugars, it was possible to observe that the pretreatment fragmented the structure as well as disordered the fibers. Regarding XRD analysis, a significant increase in crystallinity index was observed for pretreated bagasse acid/alkali (51.1%) compared to the no treatment (31.7%), while that for that treated with PHA, the crystallinity index was slightly lower, around 29%. In terms of total reducing sugars it was not possible to observe a significant difference between the hydrolysis carried out without the use of surfactant compared to the addition of Triton and rhamnolipid. However, by observing the conversions achieved during the hydrolysis, it was noted that the best conversion was using the rhamnolipíd for the husk pretreated with acid/alkali, reaching a value of 33%, whereas using Triton the higher conversion was 23.8%. The coconut husk is a residue which can present a high potential to the 2nd generation ethanol production, being the rhamonolipid a very efficient biosurfactant for use as an adjuvant in the enzymatic process in order to act on the material structure reducing its recalcitrance and therefore improving the conditions of access for enzymes to the substrate increasing thus the conversion of cellulose to glucose.

Modelação e análise de um sistema flexível de produção

A modelação dos sistemas industriais apresenta para as organizações uma vantagem estratégica no domínio do estudo dos seus processos produtivos. Através da modelação será possível aumentar o conhecimento sobre os sistemas podendo permitir, quando possível, melhorias na gestão e planeamento da produção. Este conhecimento poderá permitir também um aumento da eficiência dos processos produtivos, através da melhoria ou eliminação das principais perdas detetadas no processo. Este trabalho tem como principal objetivo o desenvolvimento e validação de uma ferramenta de modelação, previsão e análise para sistemas produtivos industriais, tendo em vista o aumento do conhecimento sobre estes. Para a execução e desenvolvimento deste trabalho, foram utilizadas e desenvolvidas várias ferramentas, conceitos, metodologias e fundamentos teóricos conhecidos da bibliografia, como OEE (Overall Equipment Effectiveness), RdP (Redes de Petri), Séries Temporais, Kmeans, ou SPC (Statistical Process Control). A ferramenta de modelação, previsão e análise desenvolvida e descrita neste trabalho, mostrou-se capaz de auxiliar na deteção e interpretação das causas que influenciam os resultados do sistema produtivo e originam perdas, demonstrando as vantagens esperadas. Estes resultados foram baseados em dados reais de um sistema produtivo.

Avaliação experimental do comportamento dinâmico de paredes de alvenaria de tijolo térmico

Compete aos agentes que concebem os edifícios, bem como aos legisladores e aos promotores, dotá-los com o máximo possível de tecnologias passivas que permitam ao utilizador economizar, sem no entanto perder conforto nem salubridade. O presente estudo consiste num trabalho de revisão bibliográfica e de investigação experimental com vista à avaliação do comportamento dinâmico de paredes de alvenaria de tijolo térmico. Aferiu-se o desempenho térmico deste tipo de paredes e a viabilidade da sua utilização essencialmente numa perspetiva da redução dos consumos energéticos e de garantia do conforto térmico e salubridade nos edifícios. Os tijolos térmicos estão cada vez mais a ser introduzidos na construção devido ainda à simplicidade na construção e a possível eliminação/redução do material isolante. Neste trabalho construiu-se uma célula de teste com paredes constituídas por este tipo de tijolo, o Bloco ThermoPrélis, cedido pela empresa PRELIS Lda. Assim, mediu-se o desempenho térmico do mesmo em condições reais, em períodos nas estações de primavera e do verão. Os resultados experimentais mostram claramente as vantagens da construção com este tipo de tijolo, que apresenta um atraso térmico de 7 a 8 horas e um amortecimento da amplitude térmica no ambiente interior bastante significativo, tirando partido do mecanismo físico associado à inércia térmica. Em termos de custos, a construção com tijolo térmico apresenta vantagens, quando comparado com a construção típica em parede dupla com isolamento térmico na caixa-de-ar.