Three-stage transformation of chlorophyll transient fluorescence pattern under sustained dehydration and the discovery of critical water content in seaweeds

The chlorophyll fluorescence kinetics of marine red alga Grateloupia turutunt Yamada, green alga Ulva pertusa Kjellm and brown alga Laminaria japonica Aresch during natural sustained dehydration were monitored and investigated. The pulse amplified modulation (PAM) system was used to analyze the distinct fluorescence parameters during thallus dehydration. Results proved that the fluorescence kinetics of different seaweed all showed three patterns of transformation with sustained water loss. These were: 1) peak kinetic pattern (at the early stage of dehydration fluorescence enhanced and quenched subsequently, representing a normal physiological state). 2) plateau kinetic pattern (with sustained water loss fluorescence enhanced continuously but quenching became slower, finally reaching its maximum). 3) Platform kinetic pattern (fluorescence fell and the shape of kinetic curve was similar to plateau kinetic pattern). A critical water content (CWC) could be found and defined as the percentage of water content just prior to the fluorescence drop and to be a significant physiological index for evaluation of plant drought tolerance. Once thallus water content became lower than this value the normal peak pattern can not be recovered even through rehydration, indicating an irreversible damage to the thylakoid membrane. The CWC value corresponding to different marine species were varied and negatively correlated with their desiccation tolerance, for example. Laminaria japonica had the highest CWC value (around 90%) and the lowest dehydration tolerance of the three. In addition, a fluorescence "burst" was found only in red algae during rehydration. The different fluorescence parameters F-o, F-v and F-v, F-m were measured and compared during water loss. Both F-o and F-v increased in the first stage of dehydration but F-v/F-m. kept almost constant. So the immediate response of in vivo chlorophyll fluorescence to dehydration was an enhancement. Later with sustained dehydration F-o increased continuously while F-v decreased and tended to become smaller and smaller. The major changes in fluorescence (including fluorescence drop during dehydration and the burst during rehydration) were all attributed to the change in F-o instead of F-v This significance of F-o indicates that it is necessary to do more research on F-o as well as on its relationship with the state of thylakoid membrane.

投射性空间关系表达过程的研究

It is easy to find that, in each language, the terms and phrases for the representation of spatial locating and orientation, and the ways for sharing spatial knowledge are very rich. The basic way of sharing spatial information is mapping our experience and actions with the environment by using terms and utterances that represent spatial relations. How to build the mapping relation among them and what factors affect the process of mapping are the questions need to be answered in this study. The whole course of expressing projective spatial relation includes the verbal expression and perception to the projective spatial relation. In experiment 1, the perceptual characteristics of perceiving the projective spatial relation was studied by analyzing the production latencies from the presentation of the stimulators in different directions (at 5 levels: 00, 22.50, 450, 67.50, and 900) to the onset of the corresponding buttons triggering on the keyboard, the study verifies the results of prior researches and revealed the foundation of expressing the projective spatial relation. In the experiment 2, and 3, the way and the role of the verbal expression were investigated. Subjects were asked to speak out the spatial relation between intended object and reference object by using verbal locative expressions. In experiment 2, Chinese was used as the verbal expression way, and in Experiment 3, English instead. Experiment 4 was similar as experiment 3, but time of voice key triggering was controlled and balanced among trials to verify the results of Experiment 3 further. Experiment 5 investigated the effect of pre-cue on the courses of expressing projective spatial relation. There were two kinds of clues, one was the spatial locative utterances, and the other was the perceptual coordinates framework, such as drawing a cross ”+” in a circle to imply four quadrants. The main conclusions of this research were as follows: 1. When speaking out a spatial relation, different sets of spatial terms, such as “left and right”, or “north and south”, affected the speed of verbal expression. Verbal coding process was affected by how well the perceptual salient direction matched with spatial terms, which made the speed of verbal expression different. 2. When using composite spatial terms to express diagonal directions, people tend to use direct mapping from spatial conceptual representation to composite spatial terms, rather than combining the two axes, which implied there existed direct one-on-one mapping between spatial conceptual representation and spatial terms. But during specific developing period, the way of combining two axes was employed as well for spatial expression, which meant perceptual salient directions played critical role in the process of perceiving and expressing projective spatial relations. 3. The process of verbal expression of the projective spatial relation was improved by the familiarity of spatial utterances, but this improvement was not the results of enhancement of the effect of prototypical diagonal direction.

Computational Vision: A Critical Review

We review the progress made in computational vision, as represented by Marr's approach, in the last fifteen years. First, we briefly outline computational theories developed for low, middle and high-level vision. We then discuss in more detail solutions proposed to three representative problems in vision, each dealing with a different level of visual processing. Finally, we discuss modifications to the currently established computational paradigm that appear to be dictated by the recent developments in vision.

Automatically Recovering Geometry and Texture from Large Sets of Calibrated Images

Three-dimensional models which contain both geometry and texture have numerous applications such as urban planning, physical simulation, and virtual environments. A major focus of computer vision (and recently graphics) research is the automatic recovery of three-dimensional models from two-dimensional images. After many years of research this goal is yet to be achieved. Most practical modeling systems require substantial human input and unlike automatic systems are not scalable. This thesis presents a novel method for automatically recovering dense surface patches using large sets (1000's) of calibrated images taken from arbitrary positions within the scene. Physical instruments, such as Global Positioning System (GPS), inertial sensors, and inclinometers, are used to estimate the position and orientation of each image. Essentially, the problem is to find corresponding points in each of the images. Once a correspondence has been established, calculating its three-dimensional position is simply a matter of geometry. Long baseline images improve the accuracy. Short baseline images and the large number of images greatly simplifies the correspondence problem. The initial stage of the algorithm is completely local and scales linearly with the number of images. Subsequent stages are global in nature, exploit geometric constraints, and scale quadratically with the complexity of the underlying scene. We describe techniques for: 1) detecting and localizing surface patches; 2) refining camera calibration estimates and rejecting false positive surfels; and 3) grouping surface patches into surfaces and growing the surface along a two-dimensional manifold. We also discuss a method for producing high quality, textured three-dimensional models from these surfaces. Some of the most important characteristics of this approach are that it: 1) uses and refines noisy calibration estimates; 2) compensates for large variations in illumination; 3) tolerates significant soft occlusion (e.g. tree branches); and 4) associates, at a fundamental level, an estimated normal (i.e. no frontal-planar assumption) and texture with each surface patch.

A System for Representing and Using Real-World Knowledge

This report describes a knowledge-base system in which the information is stored in a network of small parallel processing elements ??de and link units ??ich are controlled by an external serial computer. This network is similar to the semantic network system of Quillian, but is much more tightly controlled. Such a network can perform certain critical deductions and searches very quickly; it avoids many of the problems of current systems, which must use complex heuristics to limit and guided their searches. It is argued (with examples) that the key operation in a knowledge-base system is the intersection of large explicit and semi-explicit sets. The parallel network system does this in a small, essentially constant number of cycles; a serial machine takes time proportional to the size of the sets, except in special cases.

Knowledge based strategy: appraising knowledge creation capability in organisations.

This thesis sets out a journey which culminates in the development of an analytical framework, the "Organisational Creativity Appraisal" which is intended to assist organisations in evaluating their ability to support and develop creativity. This framework is derived from the common thread of the thesis, which is drawn from a range of research and consultancy projects, and the resulting published work, spanning an eight year period, centring on the role of knowledge and creativity in the strategy and performance of organisations. The literature of strategy, learning and creativity increasingly recognises that organisational context is critical to the formation of strategy, to the content of the strategy and to its successful implementation. The thesis explores the ways in which learning and creativity, the basis of knowledge-based strategy, are influenced by organisational context or social architecture. The research explores the ways in which managers can gain greater understanding of the social architectures of their organisations so as to assist in supporting their strategic development. The central core of the thesis is the nine published papers upon which it is based but it also derives from the broader perspective of my published work in the form of both articles and books. The thesis further draws upon my own experience as a leader and manager in the context of university business schools and as a consultant, researcher and developer in the context of a range of international private and public sector organisations. The work is based upon a premise that theory should inform practice and that practice should inform theory. The "Organisational Creativity Appraisal" framework is informed by both theory and practice and is intended to assist in management practice. There is no assumption that management research can arrive at prescriptions for managerial and organisational behaviour. On the other hand management research can usefully inform management and organisational behaviour, as long as it is employed in a critically reflective manner. The "Organisational Creativity Appraisal" presented in this work should be regarded as the framework in its present form which is likely to develop further as my research progresses in the future.

Design thinking - a critical analysis.

The latest buzz phrase to enter the world of design research is “Design Thinking”. But is this anything new and does it really have any practical or theoretical relevance to the design world? Many sceptics believe the term has more to do with business strategy and little to do with the complex process of designing products, services and systems. Moreover, many view the term as misleading and a cheap attempt to piggyback the world of business management onto design. This paper seeks to ask is design thinking anything new? Several authors have explicitly or implicitly articulated the term “Design Thinking” before, such as Peter Rowe’s seminal book “Design Thinking” [1] first published in 1987 and Herbert Simon’s “The Sciences of the Artificial” [2] first published in 1969. In Tim Brown’s “Change by Design” [3], design thinking is thought of as a system of three overlapping spaces rather than a sequence of orderly steps namely inspiration – the problem or opportunity that motivates the search for solutions; ideation – the process of generating, developing and testing ideas; and implementation – the path that leads from the design studio, lab and factory to the market. This paper seeks to examine and critically analyse the tenets of this new design thinking manifesto set against three case studies of modern design practice. As such, the paper will compare design thinking theory with the reality of design in practice.

Development of process control methodology for tracking the quality and safety of pain, agitation and sedation management in critical care units

Objective: To develop sedation, pain, and agitation quality measures using process control methodology and evaluate their properties in clinical practice. Design: A Sedation Quality Assessment Tool was developed and validated to capture data for 12-hour periods of nursing care. Domains included pain/discomfort and sedation-agitation behaviors; sedative, analgesic, and neuromuscular blocking drug administration; ventilation status; and conditions potentially justifying deep sedation. Predefined sedation-related adverse events were recorded daily. Using an iterative process, algorithms were developed to describe the proportion of care periods with poor limb relaxation, poor ventilator synchronization, unnecessary deep sedation, agitation, and an overall optimum sedation metric. Proportion charts described processes over time (2 monthly intervals) for each ICU. The numbers of patients treated between sedation-related adverse events were described with G charts. Automated algorithms generated charts for 12 months of sequential data. Mean values for each process were calculated, and variation within and between ICUs explored qualitatively. Setting: Eight Scottish ICUs over a 12-month period. Patients: Mechanically ventilated patients. Interventions: None. Measurements and Main Results: The Sedation Quality Assessment Tool agitation-sedation domains correlated with the Richmond Sedation Agitation Scale score (Spearman [rho] = 0.75) and were reliable in clinician-clinician (weighted kappa; [kappa] = 0.66) and clinician-researcher ([kappa] = 0.82) comparisons. The limb movement domain had fair correlation with Behavioral Pain Scale ([rho] = 0.24) and was reliable in clinician-clinician ([kappa] = 0.58) and clinician-researcher ([kappa] = 0.45) comparisons. Ventilator synchronization correlated with Behavioral Pain Scale ([rho] = 0.54), and reliability in clinician-clinician ([kappa] = 0.29) and clinician-researcher ([kappa] = 0.42) comparisons was fair-moderate. Eight hundred twenty-five patients were enrolled (range, 59-235 across ICUs), providing 12,385 care periods for evaluation (range 655-3,481 across ICUs). The mean proportion of care periods with each quality metric varied between ICUs: excessive sedation 12-38%; agitation 4-17%; poor relaxation 13-21%; poor ventilator synchronization 8-17%; and overall optimum sedation 45-70%. Mean adverse event intervals ranged from 1.5 to 10.3 patients treated. The quality measures appeared relatively stable during the observation period. Conclusions: Process control methodology can be used to simultaneously monitor multiple aspects of pain-sedation-agitation management within ICUs. Variation within and between ICUs could be used as triggers to explore practice variation, improve quality, and monitor this over time

Understanding nurses’ decision-making when managing weaning from mechanical ventilation: a study of novice and experienced critical care nurses in Scotland and Greece.

Aim and objectives To examine how nurses collect and use cues from respiratory assessment to inform their decisions as they wean patients from ventilatory support. Background Prompt and accurate identification of the patient's ability to sustain reduction of ventilatory support has the potential to increase the likelihood of successful weaning. Nurses' information processing during the weaning from mechanical ventilation has not been well-described. Design A descriptive ethnographic study exploring critical care nurses' decision-making processes when weaning mechanically ventilated patients from ventilatory support in the real setting. Methods Novice and expert Scottish and Greek nurses from two tertiary intensive care units were observed in real practice of weaning mechanical ventilation and were invited to participate in reflective interviews near the end of their shift. Data were analysed thematically using concept maps based on information processing theory. Ethics approval and informed consent were obtained. Results Scottish and Greek critical care nurses acquired patient-centred objective physiological and subjective information from respiratory assessment and previous knowledge of the patient, which they clustered around seven concepts descriptive of the patient's ability to wean. Less experienced nurses required more encounters of cues to attain the concepts with certainty. Subjective criteria were intuitively derived from previous knowledge of patients' responses to changes of ventilatory support. All nurses used focusing decision-making strategies to select and group cues in order to categorise information with certainty and reduce the mental strain of the decision task. Conclusions Nurses used patient-centred information to make a judgment about the patients' ability to wean. Decision-making strategies that involve categorisation of patient-centred information can be taught in bespoke educational programmes for mechanical ventilation and weaning. Relevance to clinical practice Advanced clinical reasoning skills and accurate detection of cues in respiratory assessment by critical care nurses will ensure optimum patient management in weaning mechanical ventilation

Critical incident technique and explicitation interviewing in studies of information behavior

Urquhart, C., Light, A., Thomas, R., Barker, A., Yeoman, A., Cooper, J., Armstrong, C., Fenton, R., Lonsdale, R. & Spink, S. (2003). Critical incident technique and explicitation interviewing in studies of information behavior. Library and Information Science Research, 25(1), 63-88. Sponsorship: JISC (for JUSTEIS element)

Fuzzy-Rough Sets Assisted Attribute Selection

R. Jensen and Q. Shen. Fuzzy-Rough Sets Assisted Attribute Selection. IEEE Transactions on Fuzzy Systems, vol. 15, no. 1, pp. 73-89, 2007.

Feature Selection based on Rough Sets and Particle Swarm Optimization

X. Wang, J. Yang, X. Teng, W. Xia, and R. Jensen. Feature Selection based on Rough Sets and Particle Swarm Optimization. Pattern Recognition Letters, vol. 28, no. 4, pp. 459-471, 2007.

Rough sets, their extensions and applications

Q. Shen and R. Jensen, 'Rough sets, their extensions and applications,' International Journal of Automation and Computing (IJAC), vol. 4, no. 3, pp. 217-218, 2007.