Aplicação da espectroscopia de absorção de raios X no estudo do comportamento do íon Cu2+ em micelas inversas

This work deals with the application of X-Ray Absorption Spectroscopy on the study of the behavior of Cu2+ ions in inverse micelles. The formation of copper nanoparticles in water-in-oil microemulsions in pseudo-ternary systems of cetyl trimethylammonium Bromide (CTAB) surfactant, butanol co-surfactant, heptane as oil phase and aqueous solutions of CuSO4.5H2O, and NaBH4. The microemulsions were prepared with a fixed percentage (60 %) of oil phase and a variable water to tensoative proportion. It was observed an increase on Cu2+ reduction by the sodium borohydride in microemulsions with 13 % of aqueous phase, independent of the reaction time. For the microemulsions in which the aqueous phase is composed only by the CuSO4 solution, it was observed that the color of the solution depends on the water to surfactant ratio. These changes in color were attributed to a competition for the hidratation water between the polar head of the tensoative and Cu2+ ions with the eventual substitution of oxygen by bromine atoms in the first coordination shell of Cu2+ ions

Avaliação da remoção de hidrocarbonetos aromáticos (BTEX) em águas utilizando materiais nanoestruturados do tipo Ti-MCM-41

Volatile Organic Compounds are pollutants coming mainly from activities that use fossil fuels. Within this class are the BTEX (benzene, toluene, ethylbenzene and xylenes) compounds that are considered hazardous. Among the various existing techniques for degradation of pollutants, there is advanced oxidation using H2O2 generating hidoxil radical ( OH). In this work, the mesoporous material of MCM-41 was synthesized by hydrothermal method and then was used as support, the impregnation of titanium by the method of synthesis with excess solvent to obtain the catalyst Ti-MCM-41. The catalyst was used in the reaction catalyzed removal of BTEX in water using H2O2 as oxidant. The materials were characterized by: XRD, TG/DTG, FTIR, nitrogen adsorption-desorption and FRX-EDX, in order to verify the method of impregnation of the mesoporous titanium support was effective. Catalytic tests were carried out in reactors of 20 mL containing BTEX (100.0 μg/L), H2O2 (2.0 M) and Ti-MCM-41 (2.0 g/L) in acid medium. The reaction occurred for 5 h at 60 °C and analysis were performed by gas chromatography with photoionization detector and static headspace sampler. The characterizations have proven the effectiveness of the synthesis method used and the incorporation of titanium lt in the support. The catalytic tests showed satisfactory results with conversion of more than 95 % for the studied compounds, where the catalyst 48% Ti-MCM-41 showed a higher removal efficiency of the compounds under study

Estudo da digestão de sedimento de curtume visando a extração do cromo por microemulsão

Leather tanneries generate effluents with high content of heavy metals, especially chromium, which is used in the mineral tanning process. Microemulsions have been studied in the extraction of heavy metals from aqueous solutions. Considering the problems related with the sediment resulting from the tanning process, due to its high content in chromium, in this work this sediment was characterized and microemulsion systems were applied for chromium removal. The extraction process consists in the removal of heavy metal ions present in an aqueous feeding solution (acid digestion solution) by a microemulsion system. First three different solid sludge digestion methods were evaluated, being chosen the method with higher digestion capacity. For this digestion method, seeking its optimization, was evaluated the influence of granule size, temperature and digestion time. Experimental results showed that the method proposed by USEPA (Method A) was the most efficient one, being obtained 95.77% of sample digestion. Regarding to the evaluated parameters, the best results were achieved at 95°C, 14 Mesh granule size, and 60 minutes digestion time. For chromium removal, three microemulsion extraction methods were evaluated: Method 1, in a Winsor II region, using as aqueous phase the acid digestion solution; Method 2, in a Winsor IV region, being obtained by the addition of the acid digestion solution to a microemulsion phase, whose aqueous phase is distilled water, until the formation of Winsor II system; and Method 3, in a Winsor III region, consisting in the formation of a Winsor III region using as aqueous phase the acid digestion solution, diluted in NaOH 0.01N. Seeking to optimize the extraction process only Method 1 (Systems I, II, and VIII) and Method 2 (System IX) were evaluated, being chosen points inside the interest regions (studied domains) to study the influence of contact time and pH in the extraction percentiles. The studied systems present the following compositions: System I: Surfactant Saponified coconut oil, Cosurfactant 1-Butanol, Oil phase Kerosene, Aqueous phase 2% NaCl solution; System II: Aqueous phase Acid digestion solution with pH adjusted using KOH (pH 3.5); System VIII: Aqueous phase - Acid digestion solution (pH 0.06); and System IX Aqueous phase Distilled water (pH 10.24), the other phases of Systems II, VIII and IX are similar to System I. Method 2 showed to be the more efficient one regarding chromium extraction percentile (up to 96.59% - pH 3.5). Considering that with Method 2 the microemulsion region only appears in the Winsor II region, it was studied Method 3 (System X) for the evaluation and characterization of a triphasic system, seeking to compare with a biphases system. System X is composed by: Surfactant Saponified coconut oil, Cosurfactant 1-Butanol, Oil phase Kerosene, Aqueous phase Acid digestion solution diluted with water and with its pH adjusted using 0.01N NaOH solution. The biphasic and triphasic microemulsion systems were analyzed regarding its viscosity, extraction efficiency and drop effective diameter. The experimental results showed that for viscosity studies the obtained values were low for all studied systems, the diameter of the drop is smaller in the Winsor II region, with 15.5 nm, reaching 46.0 nm in Winsor III region, being this difference attributed to variations in system compositions and micelle geometry. In chromium extraction, these points showed similar results, being achieved 99.76% for Winsor II system and 99.62% for Winsor III system. Winsor III system showed to be more efficient due to the obtaining of a icroemulsion with smaller volume, with the possibility to recover the oil phase in excess, and the use of a smaller proportion of surfactant and cosurfactant (C/S)

Aplicação de sabões de ácidos graxos epoxidados como inibidores de corrosão em oleoduto

Corrosion usually occurs in pipelines, so that it is necessary to develop new surface treatments to control it. Surfactants have played an outstanding role in this field due to its capacity of adsorbing on metal surfaces, resulting in interfaces with structures that protect the metal at low surfactant concentrations. The appearance of new surfactants is a contribution to the area, as they increase the possibility of corrosion control at specific conditions that a particular oil field presents. The aim of this work is to synthesize the surfactants sodium 12 hydroxyocadecenoate (SAR), sodium 9,10-epoxy-12 hydroxyocadecanoate (SEAR), and sodium 9,10:12,13-diepoxy-octadecanoate (SEAL) and apply them as corrosion inhibitors, studying their action in environments with different salinities and at different temperatures. The conditions used in this work were chosen in order to reproduce oil field reality. The study of the micellization of these surfactants in the liquid-gas interface was carried out using surface tensiometry. It was observed that cmc increased as salt concentration was increased, and temperature and pH were decreased, while cmc decreased with the addition of two epoxy groups in the molecule. Using the values of cmc and the Gibbs equation, the values of Gibbs free energy of adsorption, area per adsorbed molecule, and surface excess were calculated. The surface excess increases as salt concentration and temperature decreases, increasing as pH is increased. The area per adsorbed molecule and the free energy of adsorption decrease with salt concentration, temperature, and pH increase. SAXS results showed that the addition of epoxy group in surfactant structure results in a decrease in the repulsion between the micelles, favoring the formation of more oblong micellar structures, ensuring a better efficiency of metal coverage. The increase in salt and surfactant concentrations provides an increase in micellar diameter. It was shown that the increase in temperature does not influence micellar structure, indicating thermal stability that is advantageous for use as corrosion inhibitor. The results of inhibition efficiency for the surfactants SEAR and SEAL were considered the best ones. Above cmc, adsorption occurred by the migration of micelles from the bulk of the solution to the metal surface, while at concentrations below cmc film formation must be due to the adsorption of semi-micellar and monomeric structures, certainly due to the presence of the epoxy group, which allows side interactions of the molecule with the metal surface. The metal resistance to corrosion presented values of 90% of efficiency. The application of Langmuir and Frumkin isotherms showed that the later gives a better description of adsorption because the model takes into account side interactions from the adsorbing molecules. Wettability results showed that micelle formation on the solid surface occurs at concentrations in the magnitude of 10-3 M, which isthe value found in the cmc study. This value also justifies the maximum efficiencies obtained for the measurements of corrosion resistance at this concentration. The values of contact angle as a function of time suggest that adsorption increases with time, due to the formation of micellar structures on metal surface

Sistema microemulsionado: caracterização e aplicação na indústria de petróleo

Alkyl polyethoxylates are surfactants widely used in vastly different fields, from oil exploitation to pharmaceutical applications. One of the most interesting characteristics of these surfactants is their ability to form micellar systems with specific geometry, the so-called wormlike micelle. In this work, microemulsions with three distinct compositions (C/T = 40 %, 30 % and 25 %) was used with contain UNITOL / butanol / water / xylene, cosurfactant / surfactante (C/S) ratio equal to 0,5. The microemulsion was characterized by dynamic light scattering (DLS), capillary viscometry, torque rheometry and surface tensiometry experiments carried out with systems based on xylene, water, butanol (cosurfactant) and nonaethyleneglycolmonododecyl ether (surfactant), with fixed surfactant:cosurfactant:oil composition (with and without oil phase) and varying the overall concentration of the microemulsion. The results showed that a transition from wormlike micelles to nanodrops was characterized by maximum relative viscosity (depending on how relative viscosity was defined), which was connected to maximum effective diameter, determined by DLS. Surface tension suggested that adsorption at the air water interface had a Langmuir character and that the limiting value of the surfactant surface excess was independent of the presence of cosurfactant and xylene. The results of the solubilization of oil sludge and oil recovery with the microemulsion: C/S = 40%, 30% and 25% proved to be quite effective in solubilization of oil sludge, with the percentage of solubilization (%solubilization) as high as 92.37% and enhanced oil recovery rates up to 90.22% for the point with the highest concentration of active material (surfactant), that is, 40%.

Reforma a vapor catalítica do metano: Otimização da produção e seletividade em hidrogênio por absorção in situ do CO2 produzido

Topics of research related to energy and environment have significantly grown in recent years, with the need of its own energy as hydrogen. More particularly, numerous researches have been focused on hydrogen as energy vector. The main portion of hydrogen is presently obtained by reforming of methane or light hydrocarbons (steam, oxy, dry or auto reforming). During the methane steam reforming process the formation of CO2 undesirable (the main contributor to the greenhouse effect) is observed. Thus, an oxide material (sorbent) can be used to capture the CO2 generated during the process and simultaneously shifting the equilibrium of water gas shift towards thermodynamically more favorable production of pure hydrogen. The aim of this study is to develop a material with dual function (catalyst/sorbent) in the reaction of steam reforming of methane. CaO is well known as CO2 sorbent due to its high efficiency in reactions of carbonation and easy regeneration through calcination. However the kinetic of carbonation decreases quickly with time and carbonation/calcination cycles. A calcium aluminate (Ca12Al14O33) should be used to avoid sintering and increase the stability of CaO sorbents for several cycles. Nickel, the industrial catalyst choice for steam reforming has been added to the support from different manners. These bi-functional materials (sorbent/catalyst) in different molar ratios CaO.Ca12Al14O33 (48:52, 65:35, 75:25, 90:10) were prepared by different synthesis methodologies, among them, especially the method of microwave assisted self-combustion. Synthesis, structure and catalytic performances of Ni- CaO.Ca12Al14O33 synthesized by the novel method (microwave assisted selfcombustion) proposed in this work has not being reported yet in literature. The results indicate that CO2 capture time depends both on the CaO excess and on operating conditions (eg., temperature and H2O/CH4 ratio). To be efficient for CO2 sorption, temperature of steam reforming needs to be lower than 700 °C. An optimized percentage corresponding to 75% of CaO and a ratio H2O/CH4 = 1 provides the most promising results since a smaller amount of water avoids competition between water and CO2 to form carbonate and hydroxide. If this competition is most effective (H2O/CH4 = 3) and would have a smaller amount of CaO available for absorption possibly due to the formation of Ca(OH)2. Therefore, the capture time was higher (16h) for the ratio H2O/CH4 = 1 than H2O/CH4 = 3 (7h) using as catalyst one prepared by impregnating the support obtained by microwave assisted self-combustion. Therefore, it was demonstrated that, with these catalysts, the CO2 sorption on CaO modifies the balance of the water gas-shift reaction. Consequently, steam reforming of CH4 is optimized, producing pure H2, complete conversion of methane and negligible concentration of CO2 and CO during the time of capture even at low temperature (650 °C). This validates the concept of the sorption of CO2 together with methane steam reforming

Eficiência de extração de cobre e níquel utilizando sistemas microemulsionados bifásicos e trifásicos

The environmental impact due to the improper disposal of metal-bearing industrial effluents imposes the need of wastewater treatment, since heavy metals are nonbiodegradable and hazardous substances that may cause undesirable effects to humans and the environment. The use of microemulsion systems for the extraction of metal ions from wastewaters is effective when it occurs in a Winsor II (WII) domain, where a microemulsion phase is in equilibrium with an aqueous phase in excess. However, the microemulsion phase formed in this system has a higher amount of active matter when compared to a WIII system (microemulsion in equilibrium with aqueous and oil phases both in excess). This was the reason to develop a comparative study to evaluate the efficiency of two-phases and three-phases microemulsion systems (WII and WIII) in the extraction of Cu+2 and Ni+2 from aqueous solutions. The systems were composed by: saponified coconut oil (SCO) as surfactant, n-Butanol as cosurfactant, kerosene as oil phase, and synthetic solutions of CuSO4.5H2O and NiSO4.6H2O, with 2 wt.% NaCl, as aqueous phase. Pseudoternary phase diagrams were obtained and the systems were characterized by using surface tension measurements, particle size determination and scanning electron microscopy (SEM). The concentrations of metal ions before and after extraction were determined by atomic absorption spectrometry. The extraction study of Cu+2 and Ni+2 in the WIII domain contributed to a better understanding of microemulsion extraction, elucidating the various behaviors presented in the literature for these systems. Furthermore, since WIII systems presented high extraction efficiencies, similar to the ones presented by Winsor II systems, they represented an economic and technological advantage in heavy metal extraction due to a small amount of surfactant and cosurfactant used in the process and also due to the formation of a reduced volume of aqueous phase, with high concentration of metal. Considering the reextraction process, it was observed that WIII system is more effective because it is performed in the oil phase, unlike reextraction in WII, which is performed in the aqueous phase. The presence of the metalsurfactant complex in the oil phase makes possible to regenerate only the surfactant present in the organic phase, and not all the surfactant in the process, as in WII system. This fact allows the reuse of the microemulsion phase in a new extraction process, reducing the costs with surfactant regeneration

Prevalência da disfunção temporomandibular em estudantes de odontologia por meio de diferentes índices

The epidemiology of temporomandibular disorders varies widely in the literature. The aim of this study was to determine the prevalence of TMD in dental students of the Federal University of Rio Grande do Norte assessed by different indexes. The sample consisted of 101 individuals selected by a randomized process, whose general outline was systematic sampling. For evaluation of the signs and symptoms of TMD, an anamnestic index, Fonseca s protocol, and two clinical indexes, the RDC/TMD (Research Diagnostic Criteria for Temporomandibular Disorders), or standard index, and the Helkimo s Clinical Dysfunction Index were applied. Data were analyzed using the chi-square test and kappa, besides verifying the sensitivity and specificity (5% significance). The diagnosis of TMD by different indexes showed a variation in the prevalence between 72.3% (Helkimo s Clinical index), 64.4% (Fonseca s anamnestic index) and 35.6% (RDC/TMD). There was no statistical difference between the sexes for the RDC/TMD, although this difference was found for Fonseca s and Helkimo s indexes (p<0.05). The most frequent type of TMD were joint disorders (Groups II and III), and the subtypes disc displacement with reduction (17.8%) and arthralgia (15.8%). Most individuals showed a mild TMD (45.5%) for both indexes, Fonseca and Helkimo. When comparing the types of diagnoses, RDC/TMD with Fonseca and Helkimo, low agreement was found (k=0.17 and k= 0.35, respectively). A moderate correlation between the severity of TMD was obtained (kw= 0.53) for Fonseca s protocol and Helkimo s index. High sensitivity and low specificity were seen for both diagnoses compared to standard, resulting in excessive false positives. Within the limitations of the study, it was concluded that the prevalence of TMD can vary widely, depending on the index used for its diagnosis

Aspectos clínicos e laboratoriais em ovinos submetidos a dietas com níveis elevados de enxofre com objetivo de indução de polioencefalomalácia

A polioencefalomalacia (PEM) é uma doença neurológica que acomete ruminantes e pode ser desencadeada por diversos fatores, dentre eles o consumo excessivo de enxofre. Este trabalho teve como objetivo verificar a relação entre dietas ricas em enxofre, altos níveis de gás sulfídrico ruminal e a ocorrência de polioencefalomalácia em ovinos. Foram utilizados 18 ovinos, divididos em três grupos (G1, G2 e G3) que receberam diferentes níveis de enxofre na dieta; 0,2%, 0,9% e 1,2%, respectivamente. Exames físicos (frequência cardíaca, frequência respiratória, temperatura retal e motricidade ruminal) e complementares (concentração de sulfeto de hidrogênio ruminal, hemogasometria venosa, pH do fluído ruminal, concentração de cobre sérico e hepático, tomografia computadorizada, necropsia e histopatologia) foram realizados. A temperatura retal, a hemogasometria venosa e o pH do fluido ruminal permaneceram dentro dos valores de referência para a espécie. A motricidade ruminal estava diminuída nos grupos G2 e G3 em comparação com o G1 (controle). Quanto maior a ingestão de enxofre, menores foram os níveis de cobre sérico e hepático. Valores elevados de sulfeto de hidrogênio ruminal foram detectados nos grupos G2 e G3. Nenhum animal apresentou sinais clínicos de PEM. Nos exames de tomografia computadorizada, necropsia e exame histopatológico do sistema nervoso central (SNC), não foram observadas alterações compatíveis com PEM. É provável que algum outro fator esteja associado ao excesso de enxofre na dieta para o desenvolvimento de PEM em ovinos.

Influência da massa corporal sobre a aptidão física em adolescentes: estudo a partir de escolares do ensino fundamental e médio de Sorocaba/SP

Reconhecendo a exposição a riscos à saúde a que adolescentes obesos estão submetidos e a necessidade da produção de estudos, os quais relacionem excesso de peso corporal e capacidade física durante a puberdade, configura-se como objetivo da presente comunicação explorar as relações entre o sobrepeso e a aptidão física dos alunos de ensino fundamental e médio de escola particular paulista. Trata-se de estudo de coorte, considerando como variável independente o índice de massa corporal (IMC) e como dependentes a resistência muscular localizada (RML) abdominal, força de membros inferiores (MMII), flexibilidade e agilidade. Os dados de interesse foram colhidos em duas oportunidades (no início de dois anos letivos subseqüentes), segundo testes específicos. Foi realizada análise multivariada dos perfis médios, complementada com a construção dos intervalos de confiança simultâneos, ao nível de 5% de significância. Constatou-se prevalência de 21,42% de sobrepeso e associação deste com: i) em meninos, menores RML abdominal e força de MMII e não evolução nas médias de agilidade; ii) em meninas, menor RML abdominal e agilidade, no início do período considerado. Ao se compararem os resultados entre os dois momentos de avaliação, notou-se que: i) a agilidade, das meninas com peso corporal adequado diminuiu significantemente; ii) a RML abdominal, mesmo do grupo masculino com sobrepeso, aumentou; e iii) a agilidade, somente em meninos com IMC inferior, melhorou. Verificaram-se, também entre o sexo masculino, médias de RML abdominal, força de MMII e agilidade significantemente maiores que as do grupo feminino. Nesse sentido, revela-se que a prescrição da atividade física para adolescentes deve realmente ser específica segundo composição corporal e sexo.

Surto de polioencefalomalacia por ingestão excessiva de enxofre na dieta em bezerros no Rio Grande do Sul

Neste trabalho descreve-se surto de polioencefalomalacia em bovinos decorrente da ingestão de dieta com excessiva concentração de enxofre em uma propriedade no Rio Grande do Sul. O lote era composto por 30 bezerros, mantidos em um piquete com azevém (Lolium multiflorum) e suplementados com ração e sal mineral. Seis bezerros morreram e dois deles foram necropsiados; amostras de tecido hepático para dosagem de chumbo e fragmentos do sistema nervoso central para histopatológico foram colhidos. Um dos bezerros foi examinado antes da morte e sinais neurológicos encefálicos foram constatados. Foi estabelecido o teor de enxofre nos componentes da dieta e água, a produção de sulfeto de hidrogênio ruminal em cinco bovinos do mesmo lote e realizada PCR de um bloco de parafina para detecção de DNA do herpevirus bovino tipo 5. O consumo total de enxofre foi de 0,38% da matéria seca fornecida aos animais e as dosagens de sulfeto de hidrogênio ruminal em animais do mesmo lote variaram de 1.000 a 2.500ppm. Os achados histopatológicos indicaram necrose laminar do córtex cerebral. Não foi detectado chumbo na amostra de tecido hepático e não foi identificado DNA do herpesvirus bovino tipo 5 no encéfalo. O quadro clínico de síndrome cerebrocortical associado aos elevados valores do sulfeto de hidrogênio ruminal, alta ingestão de enxofre na dieta e os achados histopatológicos permitem estabelecer o excesso de enxofre como causador da polioencefalomalacia.

Caracterização infravermelho e distribuição espectral de energia para as estrelas com planetas

Neste trabalho estudamos o comportamento das estrelas pertencentes a sistemas planetários no que diz respeito às suas características infravermelho e à distribuição espectral de energia (SED). Nosso estudo tem como base uma análise detalhada do comportamento da emissão no infravermelho de 48 estrelas com planetas, classificadas como estrelas da seqüência principal, subgigantes ou gigantes. Foram analisados dados de fotometria infravermelho nas bandas 12, 25 e 60µm do catálogo de fontes IRAS puntiformes (IPSC) e nas bandas JHK do projeto 2 Micron All Sky Survey (2MASS). A partir do cálculo da discrepância na posição de apontamento da fonte e do cálculo do índice de cor, selecionamos e localizamos os objetos no diagrama de cor-cor do IRAS. Este diagrama permite-nos identificar possíveis objetos detentores de disco de poeira. Fizemos também uma análise da distribuição espectral de energia onde observamos também traços de excesso de fluxo no infravermelho, com isso, confirmarmos a presença do disco de poeira nos objetos identificados no diagrama de cor. Apesar da atual amostra de estrelas com planetas incluir apenas um subconjunto de estrelas com planetas detectadas na vizinhança solar, a presente análise do fluxo infravermelho nesses objetos oferecem uma possibilidade única de estudar as características infravermelho das estrelas pertencentes aos sistemas planetários extra-solar. Neste contexto, nosso estudo aponta resultados interessantes, entre outros destacamos o fato de algumas estrelas com planetas apresentarem um peculiar fluxo IRAS [60-25], indicando a co-existência de poeira juntamente com os planetas destes sistemas extra solar

Tabagismo associado a outros fatores comportamentais de risco de doenças e agravos crônicos não transmissíveis

Foram entrevistados via ligação telefônica 1.410 indivíduos, amostra aleatória e representativa da população acima de 18 anos residente em domicílios conectados à rede de telefonia fixa. A prevalência de tabagismo foi de 21,8%, maior em homens (25%) e em indivíduos na faixa entre 18 e 29 anos. Tabagismo e sedentarismo juntos ocorrem em 13,9% dos homens e 14,2% das mulheres; tabagismo e baixo consumo de frutas em 12,9% dos homens e 12,3% das mulheres; e tabagismo e baixo consumo de legumes em 5,8% dos homens e 5,1% das mulheres. A associação de tabagismo e consumo excessivo de álcool foi observada apenas nos homens (em 3,5% deles) e, da mesma forma que verificada para tabagismo isoladamente, sua ocorrência concomitante a outros fatores comportamentais de risco de doenças e agravos crônicos não transmissíveis (DANT) associou-se inversamente à escolaridade. Os dados apontam indícios de efeito de aglomeração entre tabagismo e sedentarismo, tabagismo e álcool em excesso, tabagismo e dieta inadequada, justificando intervenções focadas na prevenção e redução concomitante dos principais fatores comportamentais de risco de DANT.

Prevalência de fatores de risco para doenças crônicas: inquérito populacional mediante entrevistas telefônicas em Botucatu, São Paulo, 2004

OBJETIVO: Descrever resultados da aplicação de um sistema de monitoramento de fatores de risco para doenças crônicas não transmissíveis (DCNT) por meio de entrevistas telefônicas (SIMTEL) no município de Botucatu/SP. MÉTODOS: Entrevistou-se amostra probabilística (n = 1.410) da população de indivíduos com 18 ou mais anos de idade residente em domicílios do município de Botucatu/SP, conectados à rede de telefonia fixa. A amostragem foi realizada em três etapas: sorteio de linhas do cadastro da companhia telefônica; seleção de linhas residenciais ativas; sorteio para entrevista de um morador com 18 ou mais anos de idade por linha elegível. A taxa de sucesso (entrevistas realizadas: linhas elegíveis sorteadas) foi de 86,9%, sendo de 5,8% a proporção de recusas. Foi aplicado um questionário com 74 questões sobre consumo alimentar, atividade física, tabagismo, consumo de bebidas alcoólicas, peso e estatura recordados e auto-referência a diagnósticos médicos de hipertensão arterial e diabetes. Apresentam-se estimativas brutas da prevalência de fatores de risco/proteção para DCNT e estimativas ajustadas que levam em conta a distribuição segundo idade, sexo e escolaridade da população adulta total do município no Censo Demográfico de 2000. RESULTADOS: Foram observadas altas prevalências de excesso de peso (46.7%) e sedentarismo (57.9%). Houve desvantagem para os homens quanto ao consumo excessivo de bebidas alcoólicas e vantagem no que se refere à prática de atividade física em 1 ou mais dias da semana. Nas mulheres, observou-se associação inversa entre escolaridade e os seguintes fatores de risco: obesidade, excesso de peso, sedentarismo, consumo de carnes com gordura e hábito de fumar. Resultado semelhante foi observado para homens, exceto com relação a obesidade e excesso de peso. CONCLUSÕES: A segunda experiência de aplicação do SIMTEL confirmou o desempenho satisfatório e a utilidade do sistema em nosso meio.

Indústria informal de confecções e mercado de trabalho :um estudo sobre a grande Natal (1977-2003)

The process of globalization which has characterized today s Brazilian economic development is determining in the restructuring of productive capital, influencing the development of an economic model, founded on greater competition and use of technology. As a consequence of that, there has been a certain disorganization of the economy, the growth of social inequalities and the lack of structuring of the labor market and the social security system. This has favored a rapid growth of the urban informal economy in Brazil. In Rio Grande do Norte state, the Greater Natal area is the main production center. This is where this study found 58 informal textile industries. In the research, the organizational structure of these industries, characterized by intensive use of labor vis-à-vis the use of capital, problems with putting production in the market place, although links with the formal sector were evident, is analysed. The research also focuses on the relationship labor x capital, the nature and volume of the industrial activity in the 58 industries, their proprietors and 120 employees