Flavoured versus natural waters: macromineral (Ca, Mg, K, Na) and micromineral (Fe, Cu, Zn) contents

Macro (Ca, Mg, K, Na) and micromineral (Fe, Zn, Cu) composition of 39 waters was analysed. Determinations were made by atomic flame spectrophotometry for macrominerals and electrothermic atomisation in graphite furnace for microminerals. Mineral contents of still or sparkling natural waters (without flavours) changed from brand to brand. Mann–Whitney test was used to search for significant differences between flavoured and natural waters. For that, the concentration of each mineral was compared to the presence of flavours, preservatives, acidifying agents, fruit juice and/or sweeteners, according to the labelled composition. The statistical study demonstrated that flavoured waters generally have increased contents of K, Na, Fe and Cu. The added preservatives also led to significant differences in the mineral composition. Acidifying agents and fruit juice can also be correlated to the increase of Mg, K, Na, Fe and Cu. Sweeteners do not provide any significant difference in Ca, Mg, Fe and Zn contents.

Soil remediation time to achieve clean-up goals II: influence of natural organic matter and water contents

This work reports a relatively rapid procedure for the forecasting of the remediation time (RT) of sandy soils contaminated with cyclohexane using vapour extraction. The RT estimated through the mathematical fitting of experimental results was compared with that of real soils. The main objectives were: (i) to predict the RT of soils with natural organic matter (NOM) and water contents different from those used in experiments; and (ii) to analyse the time and efficiency of remediation, and the distribution of contaminants into the soil matrix after the remediation process, according to the soil contents of: (ii1) NOM; and (ii2) water. For sandy soils with negligible clay contents, artificially contaminated with cyclohexane before vapour extraction, it was concluded that: (i) if the NOM and water contents belonged to the range of the prepared soils, the RT of real soils could be predicted with relative differences not higher than 12%; (ii1) the increase of NOM content from 0% to 7.5% increased the RT (1.8–13 h) and decreased the remediation efficiency (RE) (99–90%) and (ii2) the increase of soil water content from 0% to 6% increased the RT (1.8–4.9 h) and decreased the RE (99–97%). NOM increases the monolayer capacity leading to a higher sorption into the solid phase. Increasing of soil water content reduces the mass transfer coefficient between phases. Concluding, NOM and water contents influence negatively the remediation process, turning it less efficient and more time consuming, and consequently more expensive.

Particularidades do ensino do canto a adolescentes no contexto da Escola de Música do Conservatório Nacional: relatório de estágio

Resumo I - O presente Relatório de Estágio foi elaborado no âmbito da Unidade Curricular (UC) de Estágio do Ensino Especializado (EEE) do Mestrado em Ensino da Música da Escola Superior de Música de Lisboa, ramo de especialização em Canto. Incide sobre a Prática Pedagógica desenvolvida com três alunos de Canto da Escola de Música do Conservatório Nacional (EMCN), no ano letivo de 2012/2013, em diferentes níveis de desenvolvimento vocal, adolescentes, ou tendo saído há pouco tempo da adolescência. Nesta secção, encontram-se enumeradas as principais linhas pedagógicas seguidas, assim como os principais motivos das opções tomadas. Descreve-se também a forma como foi organizado e planeado o trabalho técnico e musical desenvolvido com os alunos, adequado à fase de desenvolvimento físico e vocal de cada um, além do conjunto de atividades escolares realizadas, as quais tiveram como finalidade promover o seu desenvolvimento artístico.

Optical fiber sensor for Hg(II) based on carbon dots

An optical fiber sensor for Hg(II) in aqueous solution based on sol–gel immobilized carbon dots nanoparticles functionalized with PEG200 and N-acetyl-l-cysteine is described. This sol–gel method generated a thin (about 750 nm), homogenous and smooth (roughness of 2.7±0.7 a˚ ) filmthat immobilizes the carbon dots and allows reversible sensing of Hg(II) in aqueous solution. A fast (less than 10 s), reversible and stable (the fluorescence intensity measurements oscillate less than 1% after several calibration cycles) sensor system was obtained. The sensor allow the detection of submicron molar concentrations of Hg(II) in aqueous solution. The fluorescence intensity of the immobilized carbon dots is quenched by the presence of Hg(II) with a Stern-Volmer constant (pH = 6.8) of 5.3×105M−1.

O Reinado de Isabel II e a relação com os média

A Rainha Isabel II, que completou oitenta e quatro anos em Abril de 2010, conta actualmente com cinquenta e sete anos de reinado, um longo período que tem sido caracterizado pela mediatização das formas simbólicas. Utilizamos a expressão “formas simbólicas” de acordo com o significado que lhe é atribuído por John Thompson, devendo-se entender por tal um amplo conjunto de “acções e falas, imagens e textos, que são produzidos por sujeitos e reconhecidos por eles e outros como construtos significativos.” (1998: 79)

Adding value [valorization] to tannery fleshings: part II – effect of protein hydrolysates on leather dyeing

The tanning industry generates a high quantity of solid wastes. Therefore, there is a need to create valorization [added value] options for these wastes. The main objective of the present work was to study the effect of protein hydrolysates (HP) prepared from fleshings on leather dyeing. During previous studies it was found that the application of HP products, obtained from fleshings, in leather retannage intensified the colour of crust leather. In this work the CIELAB colour system was used to evaluate the effect of HP on retannage processes. The main conclusions of this study were: (i) HP can be used instead of a dicyanodiamide resin (Fortan DC) if the colour parameters of the standard procedure are to be maintained, and (ii) the replacement of an acrylic resin (Fortan A40) by glutaraldehyde-modified HP (GHP) results in a darker skin, and can therefore be interesting for the reduction of the quantity of dye used.

Atas do II Encontro de Mestrados em Educação e Ensino da Escola Superior de Educação de Lisboa

Na continuidade da publicação das Atas do I Encontro dos Mestrados em Educação da ESELx (1.º EME), realizado em 2013, a publicação dos artigos reunidos neste volume de atas, submetidos a revisão científica anónima, pretende tornar acessível, a um público mais vasto e diversificado, as comunicações apresentadas no II Encontro dos Mestrados em Educação e Ensino da ESELx (2.º EME), que decorreu na Escola Superior de Educação de Lisboa, no dia 8 de março de 2014. O Encontro foi dinamizado pela Comissão Coordenadora de Mestrados, instância do Conselho Técnico-Científico, em colaboração com o Centro Interdisciplinar de Estudos Educacionais – CIED, em que se inscrevem os projetos e programas de investigação desenvolvidos na ESELx. Prevendo-se que venha a ter, futuramente, uma periodicidade bianual, o Encontro dos Mestrados em Educação e Ensino da ESELx tem como objetivos centrais divulgar a investigação produzida no âmbito dos vários Mestrados na ESELx, e simultaneamente, constituir-se como um fórum de discussão, não só dos resultados obtidos, mas também das diversas abordagens metodológicas adotadas. Com este II Encontro de Mestrados, pretendeu-se ampliar a divulgação da investigação desenvolvida na ESELx, ao contemplar, quer a formação de natureza pós-profissional, no âmbito de mestrados dirigidos a profissionais em educação já no terreno, quer a formação inicial desses profissionais, no âmbito dos mestrados que habilitam para a docência nos contextos da Educação Pré-Escolar e do Ensino Básico (1.º e 2.º Ciclos). Este Encontro inaugura, como foi referido, a apresentação dos trabalhos desenvolvidos pelos estudantes do Mestrado em Educação Pré-Escolar, realizados no âmbito da Prática Profissional Supervisionada nos contextos de creche e jardim de infância. Neste âmbito as nove comunicações apresentadas enquadram-se numa discussão mais ampla sobre a formação de educadores/as de infância na academia portuguesa, que tem vindo a considerar a necessidade de densificar, entre outros objetivos, uma formação que dê corpo, considere e promova o desenvolvimento de uma atitude de natureza investigativa e reflexiva do/no exercício da profissão. Considerando que a investigação possa ser também entendida numa dimensão social e cultural, envolvida com o contexto em que está inserida, a apresentação oral e escrita dos trabalhos desenvolvidos configurou-se como uma oportunidade de divulgação de processos de saber compartilhado, o que, em fim último, caracteriza a própria função pedagógica da investigação no exercício da profissão docente. Os dezassete artigos, situados no contexto dos mestrados pós-profissionalização, abrangem áreas diferenciadas, tais como a intervenção precoce, o teatro, as artes plásticas, a educação matemática, a supervisão e a didática da língua portuguesa. Os percursos metodológicos privilegiados contemplam as abordagens de natureza qualitativa, quantitativa, e ainda abordagens mistas. Alguns dos estudos desenvolvidos adotaram o design de estudo de caso e outros de investigação-ação.A grande diversidade de temas, domínios e abordagens apresentados faz desta publicação um pertinente recurso para apoio epistemológico e metodológico aos estudantes inseridos em processos investigativos diversificados e, ainda, um contributo para a divulgação de conhecimento no âmbito da educação e do ensino, no contexto da realidade educativa portuguesa.

Contributions à la Paléontologie du Miocène moyen continental du Bassin du Tage. II - Observations sur les dents pharyngiennes de poissons cyprinidés - Póvoa de Santarém.

The study of Cyprinid fish pharyngeal teeth, collected by M. Telles Antunes in continental "Helvetian" sediments from Póvoa de Santarém, makes possible to demonstrate the occurrence of two distinct species. One remains undetermined. The other belongs to the recent genus Leuciscus CUV. Several dental types of this genus are described and figured as Leuciscus antunesi nov. sp. Palaeoclimatical and palaeoecological interpretations are proposed.

Towards a unified theory of health-disease: II. Holopathogenesis

This article presents a systematic framework for modeling several classes of illness-sickness-disease named as Holopathogenesis. Holopathogenesis is defined as processes of over-determination of diseases and related conditions taken as a whole, comprising selected facets of the complex object Health. First, a conceptual background of Holopathogenesis is presented as a series of significant interfaces (biomolecular-immunological, physiopathological-clinical, epidemiological-ecosocial). Second, propositions derived from Holopathogenesis are introduced in order to allow drawing the disease-illness-sickness complex as a hierarchical network of networks. Third, a formalization of intra- and inter-level correspondences, over-determination processes, effects and links of Holopathogenesis models is proposed. Finally, the Holopathogenesis frame is evaluated as a comprehensive theoretical pathology taken as a preliminary step towards a unified theory of health-disease.

Microstructure, mechanical properties and chemical degradation of brazed AISI 316 stainless steel/alumina systems

The main aims of the present study are simultaneously to relate the brazing parameters with: (i) the correspondent interfacial microstructure, (ii) the resultant mechanical properties and (iii) the electrochemical degradation behaviour of AISI 316 stainless steel/alumina brazed joints. Filler metals on such as Ag–26.5Cu–3Ti and Ag–34.5Cu–1.5Ti were used to produce the joints. Three different brazing temperatures (850, 900 and 950 °C), keeping a constant holding time of 20 min, were tested. The objective was to understand the influence of the brazing temperature on the final microstructure and properties of the joints. The mechanical properties of the metal/ceramic (M/C) joints were assessed from bond strength tests carried out using a shear solicitation loading scheme. The fracture surfaces were studied both morphologically and structurally using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction analysis (XRD). The degradation behaviour of the M/C joints was assessed by means of electrochemical techniques. It was found that using a Ag–26.5Cu–3Ti brazing alloy and a brazing temperature of 850 °C, produces the best results in terms of bond strength, 234 ± 18 MPa. The mechanical properties obtained could be explained on the basis of the different compounds identified on the fracture surfaces by XRD. On the other hand, the use of the Ag–34.5Cu–1.5Ti brazing alloy and a brazing temperature of 850 °C produces the best results in terms of corrosion rates (lower corrosion current density), 0.76 ± 0.21 μA cm−2. Nevertheless, the joints produced at 850 °C using a Ag–26.5Cu–3Ti brazing alloy present the best compromise between mechanical properties and degradation behaviour, 234 ± 18 MPa and 1.26 ± 0.58 μA cm−2, respectively. The role of Ti diffusion is fundamental in terms of the final value achieved for the M/C bond strength. On the contrary, the Ag and Cu distribution along the brazed interface seem to play the most relevant role in the metal/ceramic joints electrochemical performance.

Interlaminar fracture characterization of a carbon-epoxy composite in pure mode II

The interlaminar fracture toughness in pure mode II (GIIc) of a Carbon-Fibre Reinforced Plastic (CFRP) composite is characterized experimentally and numerically in this work, using the End-Notched Flexure (ENF) fracture characterization test. The value of GIIc was extracted by a new data reduction scheme avoiding the crack length measurement, named Compliance-Based Beam Method (CBBM). This method eliminates the crack measurement errors, which can be non-negligible, and reflect on the accuracy of the fracture energy calculations. Moreover, it accounts for the Fracture Process Zone (FPZ) effects. A numerical study using the Finite Element Method (FEM) and a triangular cohesive damage model, implemented within interface finite elements and based on the indirect use of Fracture Mechanics, was performed to evaluate the suitability of the CBBM to obtain GIIc. This was performed comparing the input values of GIIc in the numerical models with the ones resulting from the application of the CBBM to the numerical load-displacement (P-) curve. In this numerical study, the Compliance Calibration Method (CCM) was also used to extract GIIc, for comparison purposes.

Cultura da (in) segurança nos contextos de trabalho em enfermagem: o caso do Hospital do Espírito Santo de Évora - E.P.E.

Mestrado em Intervenção Sócio-Organizacional na Saúde - Área de especialização: Políticas de Administração e Gestão de Serviços de Saúde

Copper-organic frameworks assembled from in situ generated 5-(4-pyridyl) tetrazole building blocks: synthesis, structural features, topological analysis and catalytic oxidation of alcohols

Two new metal- organic compounds {[Cu-3(mu(3)-4-(p)tz)(4)(mu(2)-N-3)(2)(DMF)(2)](DMF)(2)}(n) (1) and {[Cu(4ptz) (2)(H2O)(2)]}(n) (2) {4-ptz = 5-(4-pyridyl)tetrazolate} with 3D and 2D coordination networks, respectively, have been synthesized while studying the effect of reaction conditions on the coordination modes of 4-pytz by employing the [2 + 3] cycloaddition as a tool for generating in situ the 5-substituted tetrazole ligands from 4-pyridinecarbonitrile and NaN3 in the presence of a copper(II) salt. The obtained compounds have been structurally characterized and the topological analysis of 1 discloses a topologically unique trinodal 3,5,6-connected 3D network which, upon further simplification, results in a uninodal 8-connected underlying net with the bcu (body centred cubic) topology driven by the [Cu-3(mu(2)-N-3)(2)] cluster nodes and mu(3)-4-ptz linkers. In contrast, the 2D metal-organic network in 2 has been classified as a uninodal 4-connected underlying net with the sql [Shubnikov tetragonal plane net] topology assembled from the Cu nodes and mu(2)-4-ptz linkers. The catalytic investigations disclosed that 1 and 2 act as active catalyst precursors towards the microwave-assisted homogeneous oxidation of secondary alcohols (1-phenylethanol, cyclohexanol, 2-hexanol, 3-hexanol, 2-octanol and 3-octanol) with tert-butylhydroperoxide, leading to the yields of the corresponding ketones up to 86% (TOF = 430 h(-1)) and 58% (TOF = 290 h(-1)) in the oxidation of 1-phenylethanol and cyclohexanol, respectively, after 1 h under low power ( 10 W) microwave irradiation, and in the absence of any added solvent or additive.