Avaliação numérica do comportamento sísmico de estruturas de betão armado

Os danos provocados por sismos encontram-se diretamente relacionados com os movimentos do solo que este possa provocar, com a vulnerabilidade da estrutura geológica e com a capacidade das construções para resistirem a tais ações. A preocupação na salvaguarda da vida humana e no mitigar dos danos provocados por eventos sísmicos conduziu a um grande avanço e aperfeiçoamento na compreensão do fenómeno, nas suas consequências e nas técnicas de conceção e de dimensionamento sismo-resistentes. À medida que as exigências técnicas evoluem, procura-se desenvolver métodos de análise que descrevam melhor o comportamento real das estruturas. Embora atualmente as análises dinâmicas tridimensionais lineares com base em análises modais e em coeficientes de comportamento sejam muito utilizadas, devido essencialmente à sua simplicidade e rapidez de execução, tem-se verificado uma crescente aderência a novas metodologias que têm diretamente em conta o comportamento não linear das estruturas quando sujeitas a ações sísmicas. Esta tese tem como principal objetivo estudar diferentes técnicas de simulação numérica do comportamento sísmico de estruturas de betão armado. São descritas as principais características das metodologias de simulação numérica mais utilizadas tanto em gabinete de projeto como em estudos de investigação. É dada especial atenção às análises dinâmicas não lineares, uma vez que esta técnica foi utilizada para simular o comportamento de uma estrutura de betão armado de um piso, que foi ensaiada no âmbito da 15ª Conferência Mundial em Engenharia Sísmica. Para avaliar a capacidade de simulação desta técnica, os resultados numéricos são diretamente comparados com os resultados experimentais, sendo possível verificar uma boa concordâncias entre ambos.

Estruturas de correção torrencial nas ribeiras do Funchal, açudes: inventariação e análise comparativa

A presente dissertação tem como propósito a elaboração de um inventário relativo às estruturas de correção torrencial construídas no concelho do Funchal. Na sequência da aluvião do dia 20 de fevereiro de 2010, resultante de um período prolongado de chuva na ilha da Madeira, aliada ao facto desta ter um relevo muito pronunciado e extremamente acidentado, originaram-se os movimentos de vertente que, na sua grande maioria, são responsáveis pela ocorrência de cheias rápidas. Pois as bacias hidrográficas da ilha são de pequena dimensão e consequentemente as suas ribeiras, dão origem a tempos de concentração muito reduzidos. Desta forma, as ribeiras que são alimentadas pelo escoamento líquido e sólido, tornam-se num agente erosivo e potenciam um rasto de destruição. Esta aluvião teve consequências devastadoras em toda a vertente sul da ilha da Madeira, no entanto, este trabalho, focou-se apenas no concelho do Funchal, no qual existem três ribeiras onde foram implantadas as estruturas de correção torrencial, designadas por açudes, que constituem o âmago deste estudo, através da inventariação destas estruturas e posterior elaboração de uma ficha de inventário relativa a cada uma delas. Inicialmente, procedeu-se à identificação de todos os açudes, à verificação e análise das condições dos locais intervencionados, além de um levantamento fotográfico para execução posterior de um enquadramento geográfico dos mesmos. Foram abordadas algumas considerações de caráter hidrológico, hidráulico e transporte de caudal sólido, que são a base dimensional e a razão da execução dos referidos açudes. Numa fase posterior, foi elaborada uma base de dados com a informação disponível dos vários açudes identificados, munida de valor ímpar para futuros desenvolvimentos nesta área no curso de engenharia civil na Universidade da Madeira. Por fim, são expostas algumas considerações relativamente aos diferentes modelos de estruturas de correção torrencial encontrados na pouca bibliografia especializada e implantados no terreno.

Análise fractal da vasculatura retínica: métodos de segmentação e de cálculo dimensional

Embora tenha sido proposto que a vasculatura retínica apresenta estrutura fractal, nenhuma padronização do método de segmentação ou do método de cálculo das dimensões fractais foi realizada. Este estudo objetivou determinar se a estimação das dimensões fractais da vasculatura retínica é dependente dos métodos de segmentação vascular e dos métodos de cálculo de dimensão. Métodos: Dez imagens retinográficas foram segmentadas para extrair suas árvores vasculares por quatro métodos computacionais (“multithreshold”, “scale-space”, “pixel classification” e “ridge based detection”). Suas dimensões fractais de “informação”, de “massa-raio” e “por contagem de caixas” foram então calculadas e comparadas com as dimensões das mesmas árvores vasculares, quando obtidas pela segmentação manual (padrão áureo). Resultados: As médias das dimensões fractais variaram através dos grupos de diferentes métodos de segmentação, de 1,39 a 1,47 para a dimensão por contagem de caixas, de 1,47 a 1,52 para a dimensão de informação e de 1,48 a 1,57 para a dimensão de massa-raio. A utilização de diferentes métodos computacionais de segmentação vascular, bem como de diferentes métodos de cálculo de dimensão, introduziu diferença estatisticamente significativa nos valores das dimensões fractais das árvores vasculares. Conclusão: A estimação das dimensões fractais da vasculatura retínica foi dependente tanto dos métodos de segmentação vascular, quanto dos métodos de cálculo de dimensão utilizados

Efeitos da dieta hipoprotéica na formação e composição de estruturas dentárias. Estudo Experimental em ratos wistar

Protein and caloric malnutrition has been considered one of the most concerned endemic diseases in Brazil and in the world. It has been known that depletion or reduction of proteins as far as meals are concerned can steer irreversible damages upon several organic systems. This study had as aim evaluate the effects the low-protein diet had over the formation and composition of the teeth components. 18 females and 6 males were used for the experiment. 12 from the 18 females had undertaken the low-protein diet (DH) for 03 weeks and the other 6, which remained, and those males had undertaken a controlled diet (DC) for the same period. All animals had the diets during their mating, pregnancy and lactation cycle. As soon as the offsprings had been born, 10 young males and females of each group faced a disease hood analysis to check the teeth germs of their lower fore teeth. The rest of the group had their lactation cycle normally 60 days. Then they were put to death and had their lower fore teeth removed both to be analyzed through a scanning electronic microscopy (SEM) of the structure alterations and to have their calcium checked by an atomic absorption of the phosphorus vanadate-molibdate method and by other minerals EDX method. The animals livers were removed to have their hepatic proteins analyzed as well. The histopatologic study showed that at first day of birth, all animals had their lower fore teeth come out. It was verified that 90% of the animals teeth were in an apposition and calcification period and it was possible to observe the dentin formation from 60% of the 90% already mentioned. Through the SEM method it could be realized that 90% of the animals of the DH group had their lower fore teeth easily broken and no definite shape. In this same group itself, it was also observed long micro fissures 369,66 nm ± 3,45 while the DC group had fissures of 174 nm ± 5,72. Now regarding the calcium and phosphorus concentration, it could be noticed that there was a great reduction of these components and other minerals in the DH group. Almost all minerals, except for the Cl and K, presented higher levels in the DC group enamel.The reduction of the protein input greatly influenced the offsprings´ weight and height. However the hepatic proteins had no important difference between the groups what can make one believe that those animals suffered from protein malnutrition of marasmic kind

Estruturas cerâmicas a base de zircônia e alumina utilizadas na confecção de infra - estruturas para coroas e pontes fixas

The continuous advances in ceramic systems for crowns and bridges infrastructure getting researchers and manufacturers looking for a material that has good mechanical properties and aesthetic. The purpose of this study was to verify in which composition and sintering temperature the ceramic system for infrastructure composed of alumina and zirconia would have the best mechanical properties. With this objective we made in UFRN laboratories 45 test bodies in the form of rectangular bars with the following dimensions: 30mm x 8mm x 3mm, where we separated by the sintering temperature: 1200°C, 1300ºC and 1400ºC, and by comp osition: 33% Zirconia + 67% Alumina; 50% Zirconia + 50% Alumina and 25% Zirconia + 75% Alumina, these test bodies were not infiltrated with glass. Also, were made nine test bodies by a technical from a laboratory with a commercial ceramic system: in the Ceram Zircônia (Vita - Zahnfabrik) with the following dimensions: 20mm x 10mm x 0.5mm, these test bodies following all recommendations of the manufacturer and were infiltrated with glass. Were realized optical and electronic microscopy analyses, hardness testing, resistance to bending in three points, porosity and bulk density. After analysis of the results we verified that with the increasing of sintering temperature, increased the value of resistance to bending, but with the same temperature there was no significant difference between the different compositions, samples made with the commercial ceramic that were infiltrated, presented a resistance to bending six times greater than the samples sintered to 1400°C and which have not been infiltra ted. There was no significant difference between the values of apparent porosity for the samples made in UFRN laboratories, but the samples of commercial ceramic obtained 0% in porosity apparent value. In tests of Rockwell Hardness there is an increase in the value of Hardness, with the increase of sintering temperature for the samples not infiltrated. Samples infiltrated showed similar values as the samples sintered in 1400°C. There was no significant difference between the values of apparent density among samples manufactured in UFRN laboratories and samples made with a commercial ceramic

Análise gráfica de estruturas porosas sobre a ótica da estereologia

In this work we developed a computer simulation program for physics porous structures based on programming language C + + using a Geforce 9600 GT with the PhysX chip, originally developed for video games. With this tool, the ability of physical interaction between simulated objects is enlarged, allowing to simulate a porous structure, for example, reservoir rocks and structures with high density. The initial procedure for developing the simulation is the construction of porous cubic structure consisting of spheres with a single size and with varying sizes. In addition, structures can also be simulated with various volume fractions. The results presented are divided into two parts: first, the ball shall be deemed as solid grains, ie the matrix phase represents the porosity, the second, the spheres are considered as pores. In this case the matrix phase represents the solid phase. The simulations in both cases are the same, but the simulated structures are intrinsically different. To validate the results presented by the program, simulations were performed by varying the amount of grain, the grain size distribution and void fraction in the structure. All results showed statistically reliable and consistent with those presented in the literature. The mean values and distributions of stereological parameters measured, such as intercept linear section of perimeter area, sectional area and mean free path are in agreement with the results obtained in the literature for the structures simulated. The results may help the understanding of real structures.

Biodistribuição do pertecnetato de sódio (Na99mTcO4) em ratos submetidos à ressecção extensa de intestino delgado

Massive resection of the small intestine results in short bowel syndrome with anti-absorptive effect and repercussions on the metabolism. Morphologic and functional evaluation may be necessary in order to control wrapped organs. Scintigraphy an examination with little invading and no biologic damage can be used. The purpose were to assess the biodistribution of sodium pertecnetate in organs of rats subjected to massive resection of the small intestine, the intestinal adaptation of the remnant intestinal mucosa and weight curve evaluation in the postoperative period. Twenty-one Wistar rats were randomly allocated into three groups (n = 7). The operated group named short bowel (SB) after anesthetized was subjected to massive resection of the small intestine; the control group (C), and sham group (SHAM). On the 30th postoperative day, 0.l mL of sodium pertechnetate was injected into the venous orbital plexus. After 30 minutes, the rats were killed with an overdose of anesthetic, and fragments of the liver, spleen, pancreas, stomach, duodenum, small intestine, thyroid, lung, heart, kidney, bladder, muscle, femur and brain were harvested. The percentage of radioactivity per gram of tissue (%ATI/g) was determined using Gama Counter WizardTM 1470, PerkinElmer to all samples. Biopsies of 3 cm remaining jejunum were removed to histological analyses. Analysis of variance (ANOVA) and the Tukey test for multiple comparisons were used, considering p<0.05 as significant. The study had the participation of some departments and laboratories, as Nucleus of Experimental Surgery, Department of Surgery, Laboratory of Radiobiology, Department of Pathology and Service of Nuclear Medicine, certifying the character of a multidisciplinary research. The results were no significant differences in %ATI/g of the sodium pertechnetate in the organs of the groups studied (p>0.05). An increase in the weight of the SB rats was observed after the second postoperative week. The jejunal mucosal thickness of the SB rats was significantly greater than that of C and sham rats (p<0.05. The biodistribution of sodium pertechnetate was not affected by massive intestinal resection in rats. An adaptive response by the intestinal mucosa probably contributed to the reversion of weight loss and the biodistribution of sodium pertechnetate was not affected by the surgery

A influência do tempo de diálise e do paratormônio sobre as condições clínico-radiográficas bucais de indivíduos com insuficiência renal crônica em diálise

Universidade Estadual do Rio Grande do Norte

Crescimento e estruturas do sistema digestório de larvas de pacu alimentadas com dieta microencapsulada produzida experimentalmente

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Paradigma constitucional brasileiro da livre concorrência e da defesa do consumidor face às estruturas de poder no mercado

The Federal Constitution of 1988, when taking care of the economical order, denotes special concern in the abuses of the economical power and the disloyal competition. The mark to mediate of all this is, in fact, the defense and the consumer's protection, once this is final addressee of whatever if it puts at the consumption market. The coming of the Law 8.078/90, Code of Protection and Defense of the Consumer, inaugurates a time of effective concern with the homogeneous individual interests originating from of the consumption relationships. In this point, the focus of main to face of the present work lives, in other words, the protection of the right to the individual property, especially manifests in the exercise of the trade freedom that keeps direct relationship with the respective social function the one that is destined. The code of the consumer's defense doesn't just take care of this, but also of the other star of the relationships of the consumption. When affirming in the interruption VI of the art. 4th that the national politics of those relationships, finds ballast in the prohibition and repression efficient of all of the abuses committed in the consumption relationships, keeping inherent relationship-causality in the economical order, sculpted for the article 170 in the Constitution of 1988. In the generic plan, the mark of the present work is to question concerning the limits of the trade freedom and previsible collisions with protection norms and the consumer's defense, as well as factual convergences of those small systems, especially in what he/she refers to the innate interests to the suppliers. In the specific plan, we aspirated to identify the protection device-commands to the actors of the trade relationship, capable to guarantee the free competition in a global economy of market, seeking especially the Well-being, for soon afterwards, in an analytical perspective, to discover the possible applications that it holds the Federal Constitution, in headquarters of economical freedoms. It was observed that the consumer today doesn't need only of laws that their needs, fruit of the vulnerability that it is him/her meditate innate. He/she lacks, yes, of effective mechanisms that prevent lesions that can be them impinged by the suppliers at the time in that you/they are useful to repair the damages when happened, punishing the author of the damage

Caracterização ultrassonográfica das estruturas flexoras musculotendíneas e ligamentares da porção distal dos membros de novilhas cruzadas

Caracterizaram-se, por meio da ultrassonografia, as estruturas flexoras da porção distal dos membros de bovinos utilizando-se peças anatômicas da porção distal dos membros torácicos e pélvicos, provenientes de 20 novilhas mestiças da raça Nelore, com idades entre 24 e 36 meses. Para análise ultrassonográfica, foram estabelecidas cinco zonas de avaliação no plano transversal, denominadas, respectivamente, de zonas A, B, C, D e E, e duas em plano sagital, F-III e F-IV. Na face flexora, foram avaliados os tendões flexores digitais superficial e profundo, o músculo interósseo, o ligamento acessório do tendão flexor digital profundo e a manica flexoria, quanto à forma, limites, posição, ecogenicidade e mensurações das áreas transversais em cm². Sendo os resultados apresentados na forma descritiva e em tabelas, foi possível a caracterização das estruturas flexoras, identificando e determinando planos ultrassonográficos apropriados para a observação de imagens adequadas destes tecidos, além da obtenção de valores e parâmetros que possam ser utilizados como referência para esta espécie.

Problemas e modelos que contribuíram com o desenvolvimento do cálculo diferencial e integral: dos gregos à Newton

This article refers to a research which tries to historically (re)construct the conceptual development of the Integral and Differential calculus, taking into account its constructing model feature, since the Greeks to Newton. These models were created by the problems that have been proposed by the history and were being modified by the time the new problems were put and the mathematics known advanced. In this perspective, I also show how a number of nature philosophers and mathematicians got involved by this process. Starting with the speculations over scientific and philosophical natures done by the ancient Greeks, it culminates with Newton s work in the 17th century. Moreover, I present and analyze the problems proposed (open questions), models generated (questions answered) as well as the religious, political, economic and social conditions involved. This work is divided into 6 chapters plus the final considerations. Chapter 1 shows how the research came about, given my motivation and experience. I outline the ways I have gone trough to refine the main question and present the subject of and the objectives of the research, ending the chapter showing the theoretical bases by which the research was carried out, naming such bases as Investigation Theoretical Fields (ITF). Chapter 2 presents each one of the theoretical bases, which was introduced in the chapter 1 s end. In this discuss, I try to connect the ITF to the research. The Chapter 3 discusses the methodological choices done considering the theoretical fields considered. So, the Chapters 4, 5 and 6 present the main corpus of the research, i.e., they reconstruct the calculus history under a perspective of model building (questions answered) from the problems given (open questions), analyzing since the ancient Greeks contribution (Chapter 4), pos- Greek, especially, the Romans contribution, Hindus, Arabian, and the contribution on the Medium Age (Chapter 5). I relate the European reborn and the contribution of the philosophers and scientists until culminate with the Newton s work (Chapter 6). In the final considerations, it finally gives an account on my impressions about the development of the research as well as the results reached here. By the end, I plan out a propose of curse of Differential and Integral Calculus, having by basis the last three chapters of the article

Modelagem numérica de estruturas de contenção atirantadas em areia

A numerical study on the behavior of tied-back retaining walls in sand, using the finite element method (FEM) is presented. The analyses were performed using the software Plaxis 2D, and were focused on the development of horizontal displacements, horizontal stresses, shear forces and bending moments in the structure during the construction process. Emphasis was placed on the evaluation of wall embedment, tie-back horizontal spacing, wall thickness, and free anchor length on wall behavior. A representative soil profile of a specific region at the City of Natal, Brazil, was used in the numerical analyses. New facilities built on this region often include retaining structures of the same type studied herein. Soil behavior was modeled using the Mohr-Coulomb constitutive model, whereas the structural elements were modeled using the linear elastic model. Shear strength parameters of the soil layers were obtained from direct shear test results conducted with samples collected at the studied site. Deformation parameters were obtained from empirical correlations from SPT test results carried out on the studied site. The results of the numerical analyses revealed that the effect of wall embedment on the investigated parameters is virtually negligible. Conversely, the tie-back horizontal spacing plays an important role on the investigated parameters. The results also demonstrated that the wall thickness significantly affects the wall horizontal displacements, and the shear forces and bending moments within the retaining structure. However, wall thickness was not found to influence horizontal stresses in the structure

Modelos para análise e dimensionamento de painéis de alvenaria estrutural

The main objective of this thesis was the study of bracing panels of structural masonry, by applying the Finite Element Method and Strut and Tie Method. It was analyzed the following aspects: the effect of orthotropy on the behavior of the panels; distribution of horizontal forces between panels for buildings; comparison between Equivalent Frame and Finite Elements models; panels design with the Strut and Tie Method. The results showed that one should not disregard the orthotropy, otherwise this can lead to models stiffer than the real. Regarding the distribution of horizontal forces, showed that the disregard of lintels and shear deformation leads to significant differences in the simplified model. The results showed also that the models in Finite Element and Equivalent Frame exhibit similar behavior in respect to stiffness of panels and stress distribution over the sessions requested. It was discussing criteria for designing Strut and Tie Method models in one floor panels. Then, the theoretical strength these panels was compared with the rupture strength of panels tested in the literature. The theoretical maximum strength were always less than the rupture strength of the panels obtained in tests, due to the fact that the proposed model cannot represent the behavior of the masonry after the start of the panel cracking due to plasticization of the reinforcement

Análise de estruturas de superfície delgadas axissimétricas via método dos elementos finitos com utilização de elemento retilíneo

The present work deals with the linear analysis of bi-dimensional axisymmetric structures, through development and implementation of a Finite Element Method code. The structures are initially studied alone and afterwards compatibilized into coupled structures, that is, assemblages, including tanks and pressure vessels. Examples are analysed and, in order to prove accuracy, the results were compared with those furnished by the analytical solutions