Genes associated with pathogenicity of avian Escherichia coli (APEC) isolated from respiratory cases of poultry

The virulence mechanisms of avian pathogenic Escherichia coli (APEC) have been continually studied and are believed to be multi-factorial. Certain properties are primarily associated with virulent samples and have been identified in avian isolates. In this study a total of 61 E. coli, isolates from chicken flocks with respiratory symptomatology, were probed by Polimerase Chain Reation (PCR) for the presence of genes responsible for the adhesion capacity, P fimbria (papC) e F11 fimbria (felA), colicin production (cvaC), aerobactin presence (iutA), serum resistance (iss), temperature-sensitive hemagglutinin (tsh), and presence of K1 and K5 capsular antigens (kpsII). The iss gene was detected in 73,8%, tsh in 55,7%, iutA in 45,9%, felA in 39,3%, papC in 24,3%, cvaC in 23% and kpsII in18%.

Canine papillomatosis: a retrospective study of 24 cases (2001-2011) and immunohistochemical characterization

A retrospective study of 24 cases of papillomas in dogs was performed from January 2001 to March 2011. Additionally, immunohistochemistry (IHC) was used to characterize and evaluate the samples. We found that disease was observed more in mixed breed dogs, ages ranging from 6 months to 10 years (mean 3.1 years), and there was no gender predilection. The main lesion sites were the skin (75%), lips (16.7%), and eyelids (8.3%). Upon histological evaluation, we observed papillary exophytic proliferation of squamous epithelium and papillary endophytic proliferation (inverted) in 87.5% and 12.5% of cases, respectively. The tumors were characterized by spinous layer hyperplasia (87.5%) with koilocytes (70.8%) and intranuclear pale basophilic inclusions bodies (8.3%), prominent granular layer with large amounts of keratohyalin granules (95.8%), and hyperkeratosis in the stratum corneum (100%). Positive immunostaining for Papillomavirus was found in 83.3% of cases, which were distributed between the granular layer and the stratum corneum. These findings indicate the following: that papillomas in dogs are caused by Papillomavirus, the viral cytopathic effect induces epithelial lesions, viral particles are found inside the cell nuclei, and inclusions bodies are rare.

Primary bone neoplasms in dogs: 90 cases

A retrospective study of necropsy and biopsy cases of 90 primary bone tumors (89 malignant and one benign) in dogs received over a period of 22 years at the Laboratório de Patologia Veterinária, Universidade Federal de Santa Maria, was performed. Osteosarcoma was the most prevalent bone tumor, accounting for 86.7% of all malignant primary bone neoplasms diagnosed. Most cases occurred in dogs of large and giant breeds with ages between 6 and 10-years-old. The neoplasms involved mainly the appendicular skeleton, and were 3.5 times more prevalent in the forelimbs than in the hindlimbs. Osteoblastic osteosarcoma was the predominant histological subtype. Epidemiological and pathological findings of osteosarcomas are reported and discussed.

Detection of virulence-associated genes of Pasteurella multocida isolated from cases of fowl cholera by multiplex-PCR

The current systems of breeding poultry, based on high population density, increase the risk of spreading pathogens, especially those causing respiratory diseases and those that have more than one host. Fowl Cholera (FC) is one such pathogen, and even though it represents one of several avian diseases that should be considered in the differential diagnosis of notifiable diseases that present with sudden death, the pathogenesis and virulence factors involved in FC are still poorly understood. The objective of this study was to investigate twelve genes related to virulence in 25 samples of Pasteurella multocida isolated from FC cases in the southern region of Brazil through the development of multiplex PCR protocols. The protocols developed were capable of detecting all of the proposed genes. The ompH, oma87, sodC, hgbA, hgbB, exBD-tonB and nanB genes were present in 100% of the samples (25/25), the sodA and nanH genes were present in 96% (24/25), ptfA was present in 92% (23/25), and pfhA was present in 60% (15/25). Gene toxA was not identified in any of the samples studied (0/25). Five different genetic profiles were obtained, of which P1 (negative to toxA) was the most common. We concluded that the multiplex-PCR protocols could be useful tools for rapid and simultaneous detection of virulence genes. Despite the high frequency of the analyzed genes and the fact that all samples belonged to the same subspecies of P. multocida, five genetic profiles were observed, which should be confirmed in a study with a larger number of samples.

Red eyes in the necropsy floor: twenty cases of hyphema in dogs and cats

Hyphema (hemorrhage within the anterior chamber of the eye) can be caused by several mechanisms and can easily be detected in routine ophthalmic or necroscopic examination as discolored red eye(s). The purpose of this study is to report the cause of hyphema diagnosed as a postmortem finding in dogs and cats. Twenty cases, 14 dogs and six cats of several ages and breeds and of both sexes were included in the study. Hyphema presented as a unilateral (14 cases out of 20) or bilateral (6/20) disorder in dogs and cats and extension of hemorrhage varied from minimal to diffuse. Hyphema was secondary to systemic disease (15/20) or occurred as a primary ocular lesion (5/20) in four dogs and one cat. Primary hyphema was always unilateral. In four of these cases, the cause of hyphema was trauma and remaining case was caused by phacoclastic uveitis in a dog with bilateral hypermature cataract. Various causes of bleeding disorders were found related to secondary hyphema: in decreasing order of frequency, they included vasculitis (8/15), systemic hypertension (5/15), and acquired coagulopathies (2/15). Vasculitis due to feline infectious peritonitis accounted for half of the cases (n=3) of systemic hyphema in cats. The various pathological aspects and pathogenesis of hyphema in dogs and cats are described and discussed.

Fracture modes and acoustic emission characteristics of hydrogen-assisted cracking in high-strength low-alloy steel weldment

The aim of the present paper is to study the relationship between the fracture modes in hydrogen-assisted cracking (HAC) in microalloied steel and the emission of acoustic signals during the fracturing process. For this reason, a flux-cored arc weld (FCAW) was used in a high-strength low-alloy steel. The consumable used were the commercially available AWS E120T5-K4 and had a diameter of 1.6 mm. Two different shielding gases were used (CO2 and CO2+5% H2) to obtain complete phenomenon characterization. The implant test was applied with three levels of restriction stresses. An acoustic emission measurement system (AEMS) was coupled to the implant test apparatus. The output signal from the acoustic emission sensor was passed through an electronic amplifier and processed by a root mean square (RMS) voltage converter. Fracture surfaces were examined by scanning electron microscopy (SEM) and image analysis. Fracture modes were related with the intensity, the energy and the number of the peaks of the acoustic emission signal. The shielding gas CO2+5% H2 proved to be very useful in the experiments. Basically, three different fracture modes were identified in terms of fracture appearance: microvoid coalescence (MVC), intergranular (IG) and quasi-cleavage (QC). The results show that each mode of fracture presents a characteristic acoustic signal.

Modelling of ultrasound assisted mixing in Newtonian and non-Newtonian liquids

The purpose of this work is to obtain a better understanding of behaviour of possible ultrasound appliance on fluid media mixing. The research is done in the regard to Newtonian and non-Newtonian fluids. The process of ultrasound appliance on liquids is modelled in COMSOL Multiphysics software. The influence of ultrasound using is introduced as waveform equation. Turbulence modelling is fulfilled by the k-ε model in Newtonian fluid. The modeling of ultrasound assisted mixing in non-Newtonian fluids is based on the power law. To verify modelling results two practical methods are used: Particle Image Velocimetry and measurements of mixing time. Particle Image Velocimetry allows capturing of velocity flow field continuously and presents detailed depiction of liquid dynamics. The second way of verification is the comparison of mixing time of homogeneity. Experimentally achievement of mixing time is done by conductivity measurements. In modelling part mixing time is achieved by special module of COMSOL Multiphysics – the transport of diluted species. Both practical and modelling parts show similar radial mechanism of fluid flow under ultrasound appliance – from the horn tip fluid moves to the bottom and along the walls goes back. Velocity profiles are similar in modelling and experimental part in the case of Newtonian fluid. In the case of non-Newtonian fluid velocity profiles do not agree. The development track of ultrasound-assisted mixing modelling is presented in the thesis.

“Why share in uncertain conditions?” Factors of individual level knowledge sharing in offshoring cases

The objective of this Master’s Thesis was to research factors influencing and enhancing individual level knowledge sharing in offshore projects which often involve uncertainty of the knowledge provider’s own future. The purpose was to understand why individuals are willing to share their knowledge under these kinds of circumstances. In addition the goal was to identify obstacles to interpersonal knowledge sharing in order to understand how to mitigate their influence. The research was conducted as a qualitative multiple case study in a global IT company, and the data was gathered using semi-structured personal theme interviews within two different offshore projects. In order to a gain a wider perspective on the matter, some management representatives were interviewed as well. Data was analysed with the inductive content analysis method. Results of the study indicate that individuals are willing to share their knowledge despite of uncertainty if they are motivated, if they are provided with opportunities to do so, and if they have skills, competence and experience to share their knowledge. A strong knowledge sharing culture in the organization or team also works as a strong incentive for individual level knowledge sharing. The findings suggest that even under uncertain conditions it is possible to encourage people to share their knowledge if uncertainty can be decreased to a bearable level, a robust and personal connection and relationship between the knowledge provider and acquirer can be created and suitable opportunities for knowledge sharing are provided. In addition, based on the results the support and commitment of management and HR in addition to favourable environmental circumstances play an essential role in building a bridge between the knowledge provider and acquirer in order to create a virtual environment and space for knowledge sharing: Ba.

Stability of Natural Colorants of Plant Origin

In recent years, there have been studies that show a correlation between the hyperactivity of children and use of artificial food additives, including colorants. This has, in part, led to preference of natural products over products with artificial additives. Consumers have also become more aware of health issues. Natural food colorants have many bioactive functions, mainly vitamin A activity of carotenoids and antioxidativity, and therefore they could be more easily accepted by the consumers. However, natural colorant compounds are usually unstable, which restricts their usage. Microencapsulation could be one way to enhance the stability of natural colorant compounds and thus enable better usage for them as food colorants. Microencapsulation is a term used for processes in which the active material is totally enveloped in a coating or capsule, and thus it is separated and protected from the surrounding environment. In addition to protection by the capsule, microencapsulation can also be used to modify solubility and other properties of the encapsulated material, for example, to incorporate fat-soluble compounds into aqueous matrices. The aim of this thesis work was to study the stability of two natural pigments, lutein (carotenoid) and betanin (betalain), and to determine possible ways to enhance their stability with different microencapsulation techniques. Another aim was the extraction of pigments without the use of organic solvents and the development of previously used extraction methods. Stability of pigments in microencapsulated pigment preparations and model foods containing these were studied by measuring the pigment content after storage in different conditions. Preliminary studies on the bioavailability of microencapsulated pigments and sensory evaluation for consumer acceptance of model foods containing microencapsulated pigments were also carried out. Enzyme-assisted oil extraction was used to extract lutein from marigold (Tagetes erecta) flower without organic solvents, and the yield was comparable to solvent extraction of lutein from the same flowers. The effects of temperature, extraction time, and beet:water ratio on extraction efficiency of betanin from red beet (Beta vulgaris) were studied and the optimal conditions for maximum yield and maximum betanin concentration were determined. In both cases, extraction at 40 °C was better than extraction at 80 °C and the extraction for five minutes was as efficient as 15 or 30 minutes. For maximum betanin yield, the beet:water ratio of 1:2 was better, with possibly repeated extraction, but for maximum betanin concentration, a ratio of 1:1 was better. Lutein was incorporated into oil-in-water (o/w) emulsions with a polar oil fraction from oat (Avena sativa) as an emulsifier and mixtures of guar gum and xanthan gum or locust bean gum and xanthan gum as stabilizers to retard creaming. The stability of lutein in these emulsions was quite good, with 77 to 91 percent of lutein being left after storage in the dark at 20 to 22°C for 10 weeks whereas in spray dried emulsions the retention of lutein was 67 to 75 percent. The retention of lutein in oil was also good at 85 percent. Betanin was incorporated into the inner w1 water phase of a water1-in-oil-inwater2 (w1/o/w2) double emulsion with primary w1/o emulsion droplet size of 0.34 μm and secondary w1/o/w2 emulsion droplet size of 5.5 μm and encapsulation efficiency of betanin of 89 percent. In vitro intestinal lipid digestion was performed on the double emulsion, and during the first two hours, coalescence of the inner water phase droplets was observed, and the sizes of the double emulsion droplets increased quickly because of aggregation. This period also corresponded to gradual release of betanin, with a final release of 35 percent. The double emulsion structure was retained throughout the three-hour experiment. Betanin was also spray dried and incorporated into model juices with different pH and dry matter content. Model juices were stored in the dark at -20, 4, 20–24 or 60 °C (accelerated test) for several months. Betanin degraded quite rapidly in all of the samples and higher temperature and a lower pH accelerated degradation. Stability of betanin was much better in the spray dried powder, with practically no degradation during six months of storage in the dark at 20 to 24 °C and good stability also for six months in the dark at 60 °C with 60 percent retention. Consumer acceptance of model juices colored with spray dried betanin was compared with similar model juices colored with anthocyanins or beet extract. Consumers preferred beet extract and anthocyanin colored model juices over juices colored with spray dried betanin. However, spray dried betanin did not impart any off-odors or off-flavors into the model juices contrary to the beet extract. In conclusion, this thesis describes novel solvent-free extraction and encapsulation processes for lutein and betanin from plant sources. Lutein showed good stability in oil and in o/w emulsions, but slightly inferior in spray dried emulsions. In vitro intestinal lipid digestion showed a good stability of w1/o/w2 double emulsion and quite high retention of betanin during digestion. Consumer acceptance of model juices colored with spray dried betanin was not as good as model juices colored with anthocyanins, but addition of betanin to real berry juice could produce better results with mixture of added betanin and natural berry anthocyanins could produce a more acceptable color. Overall, further studies are needed to obtain natural colorants with good stability for the use in food products.

Pulsed electric field assisted sol-gel preparation of TiO2 particles and their photocatalytic properties

The objective of this thesis was to study the effect of pulsed electric field on the preparation of TiO2 nanoparticles via sol-gel method. The literature part deals with properties of different TiO2 crystal forms, principles of photocatalysis, sol-gel method and pulsed electric field processing. It was expected that the pulsed electric field would have an influence on crystallite size, specific surface area, polymorphism and photocatalytic activity of produced particles. TiO2 samples were prepared by using different frequencies and treatment times of pulsed electric field. The properties of produced TiO2 particles were examined X-ray diffraction (XRD), Raman spectroscopy and BET surface area analysis. The photocatalytic activities of produced TiO2 particles were determined by using them as photocatalysts for the degradation of formic acid under UVA-light. The photocatalytic activities of samples produced with sol-gel method were also compared with the commercial TiO2 powder Aeroxide® (Evonic Degussa GmbH). Pulsed electric field did not have an effect on the morphology of particles. Results from XRD and Raman analysis showed that all produced TiO2 samples were pure anatase. However, pulsed electric field did have an effect on crystallite size, specific surface area and photocatalytic activity of TiO2 particles. Generally, the crystallite sizes were smaller, specific surface areas larger and initial formic acid degradation rates higher for samples that were produced by applying the pulsed electric field. The higher photocatalytic activities were attributed to larger surface areas and smaller crystallite sizes. Though, with all of the TiO2 samples produced by the sol-gel method the initial formic acid degradation rates were significantly slower than with the commercial TiO2 powder.

Consumer online communication of corporate social responsibility in the sin industry context: Cases in the global online gambling industry.

So-called sin industries are often related to harmfulness, unethical business, and unproductiveness. Nowadays, the alcohol, gambling, and tobacco industries are most often considered to be part of sin industries, which is also the context of this study. However, the definition of a sin industry is always related to time and culture. Despite the controversies of sin industries, there are studies that have shown that corporate social responsibility (CSR) engagement is even more important for sin industries than for normal industries and that CSR has a positive effect on firm value in sin industries. With CSR this study refers to an ideology where company takes mostly voluntary actions towards various groups of stakeholders and the environment. In other words, the company goes beyond the legal norms and regulations. In particular, the purpose of this thesis is to find out how companies, operating in the online gambling industry, communicate about their CSR actions to consumers at their web pages. The online environment is essential for this study as online gambling environment is a source of many controversies in comparison to the traditional gambling halls and casinos. These include, for example, greater accessibility, anonymity, and availability of the service. This study uses qualitative textual analysis as its approach, more precisely the discourse analysis. In addition, as this study focuses on large international companies and their actions, also case study approach will be presented. The cases studied are Mybet, Unibet, and Bwin.Party. In order to study the subject, elements from discourse analysis are combined with insights of essential CSR theories, and the specific characteristics of the online gambling industry. As a background for the framework, this study uses the framework of Du & Vieira (2012). After analyzing the discourses of CSR communication and CSR practices, it seems that all of the case companies still do not use all the potential that the online environment provides in terms of CSR or stakeholder communication. There are large differences between different communication tools used at different web pages (gambling pages vs. corporation pages) and between the firms’ CSR profiles. Moreover, there are large differences in the CSR practices used in the web pages of the case companies. The findings of this study are partially alarming as the case companies represent the largest companies in the industry. There are major varieties between the companies’ CSR communication and clear shortcomings in some parts of the online communication. Moreover, the trust of the consumer was broken in some places. If this is the standard that the biggest players in the industry have set with regards to CSR communication, it is probable that the smaller players are performing even worse. Moreover, the regulators are most likely concentrating on the larger companies, so the smaller companies might have fewer incentives and pressure to perform according to the regulations or exceeding the legislation. The conclusions of this thesis provide insights to managers, regulators, and scholars. Suggestions for future studies are provided as well.

Nanoparticle-Assisted Immunoassays for Point-of-Care Testing - With Specific Interest in Minimally Interference-Prone Assays for Cardiac Troponin I

Cardiac troponins (cTn) I and T are the current golden standard biochemical markers in the diagnosis and risk stratification of patients with suspected acute coronary syndrome. During the past few years, novel assays capable of detecting cTn‐concentrations in >50% of apparently healthy individuals have become readily available. With the emerging of these high sensitivity cTn assays, reductions in the assay specificity have caused elevations in the measured cTn levels that do not correlate with the clinical picture of the patient. The increased assay sensitivity may reveal that various analytical interference mechanisms exist. This doctoral thesis focused on developing nanoparticle‐assisted immunometric assays that could possibly be applied to an automated point‐of‐care system. The main objective was to develop minimally interference‐prone assays for cTnI by employing recombinant antibody fragments. Fast 5‐ and 15‐minute assays for cTnI and D‐dimer, a degradation product of fibrin, based on intrinsically fluorescent nanoparticles were introduced, thus highlighting the versatility of nanoparticles as universally applicable labels. The utilization of antibody fragments in different versions of the developed cTnI‐assay enabled decreases in the used antibody amounts without sacrificing assay sensitivity. In addition, the utilization of recombinant antibody fragments was shown to significantly decrease the measured cTnI concentrations in an apparently healthy population, as well as in samples containing known amounts of potentially interfering factors: triglycerides, bilirubin, rheumatoid factors, or human anti‐mouse antibodies. When determining the specificity of four commercially available antibodies for cTnI, two out of the four cross‐reacted with skeletal troponin I, but caused crossreactivity issues in patient samples only when paired together. In conclusion, the results of this thesis emphasize the importance of careful antibody selection when developing cTnI assays. The results with different recombinant antibody fragments suggest that the utilization of antibody fragments should strongly be encouraged in the immunoassay field, especially with analytes such as cTnI that require highly sensitive assay approaches.

Digital services development – cases of Finland and LIBER

The presentation of Kristiina Hormia-Poutanen in The National and University Library in Zagreb March 18, 2015.

Pressure-assisted cold denaturation of hen egg white lysozyme: the influence of co-solvents probed by hydrogen exchange nuclear magnetic resonance

COSY proton nuclear magnetic resonance was used to measure the exchange rates of amide protons of hen egg white lysozyme (HEWL) in the pressure-assisted cold-denatured state and in the heat-denatured state. After dissolving lysozyme in deuterium oxide buffer, labile protons exchange for deuterons in such a way that exposed protons are substituted rapidly, whereas "protected" protons within structured parts of the protein are substituted slowly. The exchange rates k obs were determined for HEWL under heat treatment (80ºC) and under high pressure conditions at low temperature (3.75 kbar, -13ºC). Moreover, the influence of co-solvents (sorbitol, urea) on the exchange rate was examined under pressure-assisted cold denaturation conditions, and the corresponding protection factors, P, were determined. The exchange kinetics upon heat treatment was found to be a two-step process with initial slow exchange followed by a fast one, showing residual protection in the slow-exchange state and P-factors in the random-coil-like range for the final temperature-denatured state. Addition of sorbitol (500 mM) led to an increase of P-factors for the pressure-assisted cold denatured state, but not for the heat-denatured state. The presence of 2 M urea resulted in a drastic decrease of the P-factors of the pressure-assisted cold denatured state. For both types of co-solvents, the effect they exert appears to be cooperative, i.e., no particular regions within the protein can be identified with significantly diverse changes of P-factors.