Avaliação do desempenho das propriedades mecânicas de concretos self compacting elaborados com diferentes tipos de cimentos submetidos à cura térmica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A concepção de trabalho na educação básica: caminhos para a formação da juventude no Instituto Federal de Educação, Ciência e Tecnologia do Ceará

In 2008 two laws that changed the didactic- pedagogic and administrative organization of vocational schools were enacted: the Law 11.741/2008, which incorporated the Technical Professional Education for the Middle Level to Basic Education; and Law 11.892/2008,which has transformed Agrotechnical Schools, the CEFET 's and some technical schools linked to universities into Colleges of Education, Science and Technology (IFs). These institutions have been operating at all levels and types of education provided in the Law of Directives and Bases of National Education number 9394/1996, with the exception of Early Childhood Education. Vocational and training schools, which gave origin to the IFs,have historically restricted youth education to teaching professional techniques, but due to the reformist laws, they were led to revise their conceptions of work and education. Thus, the goal of this article is to analyze the concepts of Basic Education and work that permeate these laws and the organization of educational work at IFCE. Have these laws been promoting a rupture with the history of vocational education in the country? Have the IFs been accomplishing a teaching job in addition to technical training? The choice for these questions was motivated by two main reasons: a) Vocational Education in the aforementioned institutions have traditionally been restricted to the qualication of the labor force for learning a technical profession, without relating it to issues that concern basic education; b) The Reform of Basic Education, from 1990 to 2013, was conducted in the context of capital's structural crisis and aimed to adapt the educational system to the demands of productive sectors. Thus, the main objective of this paper is to explain the contradictions that exist in project of formation of the working class, in the context of a conictual society divided into classes, a situation that alienates the youth to live this time forever.

Acordo, reflexão e filosofia - uma análise a partir de Wittgenstein

Within the Wittgensteinian approach, the ideal of exactness, disconnected from concrete situations of language use, does not make any sense. Such an approach takes into account every and any kind of intersubjective communication, inasmuch as it is based on a previous agreement concerning the use of language and the interpretation of the world linked to it. This paper, throughout its three parts, seeks to understand this agreement, and evaluates whether or not philosophy plays a role in relation to it. To start with, the obstacles to such an agreement will be considered, namely, solipsism and private, subjective language. In the following stage, the intention is to indicate that the rupture from the subjectivist conception of language allows Wittgenstein to visualize another subject, the one incorporated by the community. From then on, the question is to verify whether reflectivity is possible in the ambit of a linguistic community or not, since the objectivity of concepts is not sought within knowledge, but within forms of life. In the third and last part, we will point to the language game metaphor correlative to the meaning emerging from the flow of life, of thought, and of culture and see how philosophy can represent a significant activity in the search for understanding that flow.

Information technology as a technical resource for the memories: memories of UNATI-Marília in the virtual environment

UNATI (Open University of the Third Age), UNESP, Marília campus, has offered subsidies for the development of this work aimed at researching the existing relationships between information mediation processes and technological devices, especially computers, assuming that reading practices and textual construction in online environments could help the “third age” population to have access to these devices, thus promoting digital inclusion in this group. Mediation was presented as an interventionist action that, by introducing an intermediate element in the learning process, causes a rupture in the ways of living and personal digital inclusion processes hitherto experienced. In the context of a workshop, we found out that there is a physical relationship between subjects and technological supports and such a contact proved to be necessary, considering that handling a computer required knowledge of procedures, thus furthering a logic of use. It turned out to be necessary to develop actions that would enable the handling of a computer so as to bring about acceptance of these supports. Accordingly, activities were developed so as to articulate reminiscent processes, memories of older adults, the writing down of such memories and the creation of a blog to bring enhanced visibility to the content produced by older people. Such actions have shown that remembering, writing down and posting can reshape not only social relations but somehow significantly promote digital inclusion among older adults.

Influência da adição de nanopartículas sobre a dureza, resistência à ruptura e deformação permanente de silicone facial submetido ao envelhecimento acelerado

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Obtenção de compósitos de borracha natural com resíduo industrial de couro reticulados com diferentes peróxidos

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Caracterização de argilas usadas para produção de cerâmica vermelha e estudo das alterações nas suas propriedades pela adição de resíduos

Neste trabalho são apresentados os resultados de caracterização das principais argilas usadas pela indústria cerâmica vermelha regional e, também, de alguns resíduos sólidos produzidos na região de Presidente Prudente - SP. Os resultados da incorporação destes resíduos em massas cerâmicas são avaliados através do estudo de suas propriedades tecnológicas. Para a caracterização dos materiais foram utilizadas as seguintes técnicas: análise textural (concentração das frações areia, silte e argila), difratometria de raios X e análise térmica. As propriedades tecnológicas de corpos de prova cerâmicos foram avaliadas através dos seguintes parâmetros: retração linear (RL), perda de massa ao fogo (PF), massa específica aparente (MEA), porosidade aparente (PA), absorção de água (AA) e resistência mecânica à flexão (RMF). Corpos de prova, com diferentes concentrações de resíduos, foram prensados (prensa uniaxial manual) e queimados em temperaturas que variaram de 800 a 1200 oC, usando um forno tipo mufla com controle de temperatura. As argilas sedimentares foram coletadas nas margens do rio Paraná e em áreas de várzea, próximas as cerâmicas. As amostras estudadas, coletadas nos depósitos das cerâmicas, são usadas para produção de tijolos maciços, blocos furados e telhas. Quatro tipos diferentes de resíduos foram estudados: (1) lodo de estação de tratamento de água ETA, (2) torta de filtro de indústria de re-refino de óleo lubrificante, (3) pó de vidro (soda-cal) de garrafa tipo long neck descartável, e (4) cinza de bagaço de cana. Estes resíduos foram incorporados em massas cerâmicas coletadas nas indústrias... (Resumo completo, clicar acesso eletrônico abaixo)

Effect of colloidal silica on the mechanical properties of fiber-cement reinforced with cellulosic fibers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of neem oil (Azadirachta indica A. Juss) on the replacement of the midgut epithelium in the lacewing Ceraeochrysa claveri during larval-pupal metamorphosis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Polishing for glass ceramics: Which protocol?

Purpose: The execution of adjustments on ceramic restorations is sometimes necessary for either correction of occlusion and/or inadequate contours or esthetical improvements. Clinically, the surfaces undergo weariness through fine grinding diamond burs which remove the superficial glazing layer. Several materials for ceramic polishing have been used in an attempt to reach a satisfactory surface smoothness. The aim of this study was to perform a literature review on different polishing protocols of several dental ceramics. Study selection: This is a literature review performed through scientific articles published between 2004 and 2012, indexed in MEDLINE, PubMed and Scielo databases. The study selected and analyzed a total of 20 relevant articles that evaluated different types of ceramics, polishing treatment and surface roughness.Results: After an extensive literature review, this study observed: 1 - after the rupture of the glazing layer due to the adjustments of the restorations, the best choice for the polishing of the surface will depend on the type of ceramics used; 2 - glazing procedure provide excellent results regarding to the superficial smoothness; however, if reglazing is impossible, either abrasive rubber cups/points or sandpaper discs followed by the use of diamond polishing pastes results in a satisfactory superficial smoothness; 3 - clinical studies that take into account the behavior of the protocols polishing are scarce and should be encouraged; 4 - the large number of variables influence the final outcome of polishing should be considered. Conclusions: The necessity in standardization of methodologies to enable a comparison among researches. (c) 2014 Japan Prosthodontic Society. Published by Elsevier Ireland. All rights reserved.

Bothropoides insularis venom cytotoxicity in renal tubular epithelia cells

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Oxygen Atom Transfer Reactions from Mimoun Complexes to Sulfides and Sulfoxides. A Bonding Evolution Theory Analysis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Painel particulado composto por casca de eucalipto na camada intermediária

This work was developed to evalute the physical and mechanical properties of a panel of three particle layers from the test specification of NBR 14810-3 (2006), using wood of Eucalyptus sp. and Eucalyptus saligna and Eucalyptus urograndis bark. The mechanical properties were evaluated to obtain the bending modulus of rupture (MOR) and modulus of elasticity (MOE) and Internal bond. The physical properties were obtained thickness sweeling, water absorption, moisture content and board density. Were evaluated four different compositions of panels containing 5, 10, 15 and 20% in the inner layer of bark. The results were compared with the Brazilian standard NBR 14810-2 (2006) and also with studies in the literature. The panels produced were adequate to all the optimal values suggested by the standard only in the composition with 5% skin in the inner layer. The other treatments showed satisfactory results in all tests except for moisture content

Análise da influência do torque de montagem na resistência de parafusos de fixação

Whereas the assembly torque calculation has great importance on efficiency and life of bolts, the objective of this study was to analyze the combined stresses during assembly, the friction coefficient, compare the rupture torque results with the indicated torques by standards and to present a new torque method without the stress combination (shear stress and normal stresses). For this study were carried eighteen tests with different diameters and materials, this bolts were undergoing five ranges torque until the breaking torque. With the experimental rupture torque values for each test and with the bolt quality certificate was possible to calculate the friction coefficient so compared with the theory. Another comparison was the experimental rupture torque with assembly torque indicated by NBR-8800 and ASME-PCC. The main conclusion are related to combined stress, because for this factor can fail at the assembly time, so for in some cases must use the tensioning method, because in this method won't be present torsional stresses

Metodologia de determinação das curvas de probabilidade de falha S-N-P para uma liga de aluminio submetida a diferentes tratamentos termicos de solubilização e precipitação

The approach of the subject matter in this work relies on the fact that the reliability of methods for performance analysis of materials proves critical for the result. This work focused on the development and presentation of the methodology for lifting probability curves for fatigue test (SN) according to standard E739, this focus is justified by the fact that the results in fatigue test show considerable dispersion making it difficult to reading and interpretation of data, this dispersion arises because the phenomenon of rupture is strongly influenced by internal characteristics of the material, we can then have much data ranging from test to test. Thus we set out originally for a brief study of aluminum alloys in question, as well as the treatments to which they were subjected. We also studied the behavior of materials when subjected to cyclic loading, which configures process of fatigue failure, and even fatigue test method in question. This statistical analysis is based on the ASTM E739 standard, so its contents was studied in detail so that we could present in detail the methodology and raise SN curves for different aluminum alloy 7012 subjected to fatigue test. Data were collected from tests conducted in the department of materials from two samples of aluminum alloy 7012 solubilized and precipitated by different time intervals and assayed temperature fatigue-type traction-compression, these data were then analyzed and used to survey curves using the base as E739. After lifting the curve analyzed the characteristics of the test samples and their correlation with the test results. We confirmed the effectiveness of the method of statistical analysis by ASME E739, which allowed the reading of data without this method would be very difficult to have a reading and comparison of the results for the two types... (Complete abstract click electronic access below)