Cyclone Tracy and the road to improving wind-resistant design

Early on Christmas morning 1974, tropical cyclone Tracy devastated the city of Darwin leaving only 6 per cent of the city’s housing habitable and instigating the evacuation of 75 per cent of its population. The systematic failure of so much of Darwin’s building stock led to a humanitarian disaster that proved the impetus for an upheaval of building regulatory and construction practices throughout Australia. Indeed, some of the most enduring legacies of Tracy have been the engineering and regulatory steps taken to ensure the extent of damage would not be repeated. This chapter explores these steps and highlights lessons that have led to a national building framework and practice at the fore of wind-resistant design internationally.

Organizational work-related road safety situational analysis: More than just an audit tool

Although safety statistics indicate that road crashes are the most common form of work-related fatalities, many organizations fail to treat company vehicles in the same manner as other physical safety hazards within the workplace. Traditionally, work-related road safety has targeted primarily driver-related issues and not adequately addressed organizational processes, such as the organizations’ safety system and risk management processes and practice. This inadequacy generally stems from a lack of specific contextual knowledge and basic requirements to improve work-related road safety, including the supporting systems to ensure any intervention strategy or initiative’s ongoing effectiveness. Therefore, informed by previous research and based on a case study methodology, the Organizational Work-Related Road Safety Situational Analysis was developed to assess organizations’ current work-related road safety system, including policy, procedures, processes and practice. The situational analysis tool is similar to a safety audit however is more comprehensive in detail, application and provides sufficient evidence to enable organizations to mitigate and manage their work-related road safety risks. In addition, data collected from this process assists organizations in making informed decisions regarding intervention strategy design, development, implementation and ongoing effectiveness. This paper reports on the effectiveness of the situational analysis tool to assess WRRS systems across five differing and diverse organizations; including gas exploration and mining, state government, local government, and not for profit/philanthropy. The outcomes of this project identified considerable differences in the degree by which the organizations’ addressed work-related road safety across their vehicle fleet operations and provides guidelines for improving organizations’ work-related road safety systems.

Extreme water level exceedance probabilities around Australia

The potential impacts of extreme water level events on our coasts are increasing as populations grow and sea levels rise. To better prepare for the future, coastal engineers and managers need accurate estimates of average exceedance probabilities for extreme water levels. In this paper, we estimate present day probabilities of extreme water levels around the entire coastline of Australia. Tides and storm surges generated by extra-tropical storms were included by creating a 61-year (1949-2009) hindcast of water levels using a high resolution depth averaged hydrodynamic model driven with meteorological data from a global reanalysis. Tropical cyclone-induced surges were included through numerical modelling of a database of synthetic tropical cyclones equivalent to 10,000 years of cyclone activity around Australia. Predicted water level data was analysed using extreme value theory to construct return period curves for both the water level hindcast and synthetic tropical cyclone modelling. These return period curves were then combined by taking the highest water level at each return period.

The alcohol culture of mature-aged women : similarities and differences across borders

Introduction: Relatively few attempts have been made to describe and understand women’s alcohol consumption beyond adolescence and young adulthood. In particular, there has been a lack of studies focusing on the alcohol culture that surrounds and guides mature-aged women’s drinking. As part of a larger cross-national comparison, the present study sought to address this gap by identifying the shared beliefs and values that impact on drinking outcomes among mature-aged women in Sweden and Australia. Method: The study was guided by an ethnographic methodology. To generate data, a series of semi-structured interview were conducted with 17 Australian (age = 45-57 years; M = 52.1, SD = 3.9) and 19 Swedish (age = 45-58 years; M = 52.2, SD = 4.8) women. All interviews were transcribed verbatim and thematically analysed. Results: With age, the focus of alcohol as a single purpose vehicle for intoxication had given way to a focus on the enjoyment and ritual of drinking itself; taste had become increasingly important and alcohol was strongly associated with pleasurable environments and experiences. The view of alcohol as a taste experience was particularly pronounced among the Swedish women, with alcohol (most commonly wine) often seen as inseparable from food. Among the Swedish women, this view of alcohol was also associated with a strong de-emphasis of the pharmacological effects of alcohol. In contrast, several Australian women understood and used alcohol as relief for anxiety and stress. Moderate drinking was linked to the social construction of both age and gender in the two samples, while heavy or abusive alcohol consumption was associated with strong proscriptive norms and stigma. Conclusions: Australian and Swedish women share a number of beliefs and values around alcohol, however, these findings also show unique country-level differences. Implications for drinking outcomes are discussed.

Topological design and modulation strategy for buck-boost three-level inverters

To date, designed topologies for DC-AC inversion with both voltage-buck and boost capabilities are mainly focused on two-level circuitries with extensions to three-level possibilities left nearly unexplored. Contributing to this area of research, this paper presents the design of a number of viable buck-boost three-level inverters that can also support bidirectional power conversion. The proposed front-end circuitry is developed from the Cuk-derived buck-boost two-level inverter, and by using the "alternative phase opposition disposition" (APOD) modulation scheme, the buck-boost three-level inverters can perform distinct five-level line voltage and three-level phase voltage switching by simply controlling the active switches located in the designed voltage boost section of the circuits. As a cost saving option, one active switch can further be removed from the voltage-boost section of the circuits by simply re-routing the gating commands of the remaining switches without influencing the ac output voltage amplitude. To verify the validity of the proposed inverters, Matlab/PLECS simulations were performed before a laboratory prototype was implemented for experimental testing.

Topological design and modulation strategy for buck-boost three-level inverters

To date, designed topologies for DC-AC inversion with both voltage buck and boost capabilities are mainly focused on two-level circuitries with extensions to three-level possibilities left nearly unexplored. Contributing to this area of research, this paper presents the design of a number of viable buck-boost three-level inverters that can also support bidirectional power conversion. The proposed front-end circuitry is developed from the Cuk-derived buck-boost two-level inverter, and by using the ldquoalternative phase opposition dispositionrdquo modulation scheme, the buck-boost three-level inverters can perform distinct five-level line voltage and three-level phase voltage switching by simply controlling the active switches located in the designed voltage boost section of the circuits. As a cost saving option, one active switch can further be removed from the voltage boost section of the circuits by simply rerouting the gating commands of the remaining switches without influencing the AC output voltage amplitude. To verify the validity of the proposed inverters, MATLAB/PLECS simulations were performed before a laboratory prototype was implemented for experimental testing.

Performance evaluation of three-level Z-source inverters under semiconductor-failure conditions

This paper evaluates and proposes various compensation methods for three-level Z-source inverters under semiconductor-failure conditions. Unlike the fault-tolerant techniques used in traditional three-level inverters, where either an extra phase-leg or collective switching states are used, the proposed methods for three-level Z-source inverters simply reconfigure their relevant gating signals so as to ride-through the failed semiconductor conditions smoothly without any significant decrease in their ac-output quality and amplitude. These features are partly attributed to the inherent boost characteristics of a Z-source inverter, in addition to its usual voltage-buck operation. By focusing on specific types of three-level Z-source inverters, it can also be shown that, for the dual Z-source inverters, a unique feature accompanying it is its extra ability to force common-mode voltage to zero even under semiconductor-failure conditions. For verifying these described performance features, PLECS simulation and experimental testing were performed with some results captured and shown in a later section for visual confirmation.

Dual Z-source inverter with three-level reduced common mode switching

This paper presents the design of a dual Z-source inverter that can be used with either a single dc source or two isolated dc sources. Unlike traditional inverters, the integration of a properly designed Z-source network and semiconductor switches to the proposed dual inverter allows buck-boost power conversion to be performed over a wide modulation range with three-level output waveforms generated. The connection of an additional transformer to the inverter ac output also allows all generic wye- or delta-connected loads with three-wire or four-wire configuration to be supplied by the inverter. Modulation-wise, the dual inverter can be controlled using a carefully designed carrier-based pulse-width modulation (PWM) scheme that always will ensure balanced voltage boosting of the Z-source network, while simultaneously achieving reduced common-mode switching. Because of the omission of dead-time delays in the dual inverter PWM scheme, its switched common-mode voltage can be completely eliminated, unlike in traditional inverters where narrow common-mode spikes are still generated. Under semiconductor failure conditions, the presented PWM schemes can easily be modified to allow the inverter to operate without interruption and for cases where two isolated sources are used, zero common-mode voltage can still be ensured. These theoretical findings together with the inverter practicality have been confirmed both in simulations using PSIM with Matlab/Simulink coupler and experimentally using a laboratory implemented inverter prototype.

Dual Z-source inverter with three-level reduced common-mode switching

This paper presents the design of a dual Z-source inverter that can be used with either a single dc source or two isolated dc sources. Unlike traditional inverters, the integration of a properly designed Z-source network and semiconductor switches to the proposed dual inverter allows buck-boost power conversion to be performed over a wide modulation range, with three-level output waveforms generated. The connection of an additional transformer to the inverter ac output also allows all generic wye-or delta-connected loads with three-wire or four-wire configuration to be supplied by the inverter. Modulationwise, the dual inverter can be controlled using a carefully designed carrier-based pulsewidth-modulation (PWM) scheme that will always ensure balanced voltage boosting of the Z-source network while simultaneously achieving reduced common-mode switching. Because of the omission of dead-time delays in the dual-inverter PWM scheme, its switched common-mode voltage can be completely eliminated, unlike in traditional inverters, where narrow common-mode spikes are still generated. Under semiconductor failure conditions, the presented PWM schemes can easily be modified to allow the inverter to operate without interruption, and for cases where two isolated sources are used, zero common-mode voltage can still be ensured. These theoretical findings, together with the inverter practicality, have been confirmed in simulations both using PSIM with Matlab/Simulink coupler and experimentally using a laboratory-implemented inverter prototype.

Security and Privacy in Vehicular Ad-Hoc Networks : Survey and the Road Ahead

Vehicular Ad-hoc Networks (VANETs) can make roads safer, cleaner, and smarter. It can offer a wide range of services, which can be safety and non-safety related. Many safety-related VANETs applications are real-time and mission critical, which would require strict guarantee of security and reliability. Even non-safety related multimedia applications, which will play an important role in the future, will require security support. Lack of such security and privacy in VANETs is one of the key hindrances to the wide spread implementations of it. An insecure and unreliable VANET can be more dangerous than the system without VANET support. So it is essential to make sure that “life-critical safety” information is secure enough to rely on. Securing the VANETs along with appropriate protection of the privacy drivers or vehicle owners is a very challenging task. In this work we summarize the attacks, corresponding security requirements and challenges in VANETs. We also present the most popular generic security policies which are based on prevention as well detection methods. Many VANETs applications require system-wide security support rather than individual layer from the VANETs’ protocol stack. In this work we will review the existing works in the perspective of holistic approach of security. Finally, we will provide some possible future directions to achieve system-wide security as well as privacy-friendly security in VANETs.

The location patterns of artistic clusters : a metro- and neighborhood-level analysis

Analysing census and industry data at the metro and neighbourhood levels, this paper seeks to identify the location characteristics associated with artistic clusters and determine how these characteristics vary across different places. We find that the arts cannot be taken overall as an urban panacea, but rather that their impact is place-specific and policy ought to reflect these nuances. However, our work also finds that, paradoxically, the arts’ role in developing metro economies is as highly underestimated as it is overgeneralised. While arts clusters exhibit unique industry, scale and place-specific attributes, we also find evidence that they cluster in ‘innovation districts’, suggesting they can play a larger role in economic development. To this end, our results raise important questions and point toward new approaches for arts-based urban development policy that look beyond a focus on the arts as amenities to consider the localised dynamics between the arts and other industries.

Longitudinal change in sleep and daytime sleepiness in postpartum women

Sleep disruption strongly influences daytime functioning; resultant sleepiness is recognised as a contributing risk-factor for individuals performing critical and dangerous tasks. While the relationship between sleep and sleepiness has been heavily investigated in the vulnerable sub-populations of shift workers and patients with sleep disorders, postpartum women have been comparatively overlooked. Thirty-three healthy, postpartum women recorded every episode of sleep and wake each day during postpartum weeks 6, 12 and 18. Although repeated measures analysis revealed there was no significant difference in the amount of nocturnal sleep and frequency of night-time wakings, there was a significant reduction in sleep disruption, due to fewer minutes of wake after sleep onset. Subjective sleepiness was measured each day using the Karolinska Sleepiness Scale; at the two earlier time points this was significantly correlated with sleep quality but not to sleep quantity. Epworth Sleepiness Scores significantly reduced over time; however, during week 18 over 50% of participants were still experiencing excessive daytime sleepiness (Epworth Sleepiness Score ≥12). Results have implications for health care providers and policy makers. Health care providers designing interventions to address sleepiness in new mothers should take into account the dynamic changes to sleep and sleepiness during this initial postpartum period. Policy makers developing regulations for parental leave entitlements should take into consideration the high prevalence of excessive daytime sleepiness experienced by new mothers, ensuring enough opportunity for daytime sleepiness to diminish to a manageable level prior to reengagement in the workforce.

An investigation approach to test protection intelligent electronic devices (IEDs) in IEC 61850 based substation automation systems (SAS) at station level

This thesis has developed a new approach to trace virtual protection signals in Electrical substation networks. The main goal of the research was to analyse the contents of the virtual signals transferred, using third party software. In doing so, a comprehensive test was done on a distance protection relay, using non-conventional test equipment.

A multi-level ecological model of psychotropic prescribing to adults with intellectual disability

Purpose – Simple linear accounts of prescribing do not adequately address reasons “why” doctors prescribe psychotropic medication to people with intellectual disability (ID). Greater understanding of the complex array of factors that influence decisions to prescribe is needed. Design/methodology/approach – After consideration of a number of conceptual frameworks that have potential to better understand prescribing of psychotropic medication to adults with ID, an ecological model of prescribing was developed. A case study is used to outline how the model can provide greater understanding of prescribing processes. Findings – The model presented aims to consider the complexity and multi-dimensional nature of community-based psychotropic prescribing to adults with ID. The utility of the model is illustrated through a consideration of the case study. Research limitations/implications – The model presented is conceptual and is as yet untested. Practical implications – The model presented aims to capture the complexity and multi-dimensional nature of community-based psychotropic prescribing to adults with ID. The model may provide utility for clinicians and researchers as they seek clarification of prescribing decisions. Originality/value – The paper adds valuable insight into factors influencing psychotropic prescribing to adults with ID. The ecological model of prescribing extends traditional analysis that focuses on patient characteristics and introduces multi-level perspectives that may provide utility for clinicians and researchers.

Communicating engagement in corporate social responsibility : a meta-level construal of engagement

Organizations are increasingly seeking stakeholder support through engagement to demonstrate their corporate social responsibility (CSR) credentials. These credentials are in turn used to support claims of legitimacy for organizational operations. This paper uses a process model of antecedents, implementation, and consequences to study the connection between engagement and CSR. CSR reports show organizations perceive engagement in CSR as both communication and activities between organizations and their stakeholders; and as a second, meta-level of communication about that engagement with stakeholders beyond those directly involved, thereby broadening the scope of organizational claims to legitimacy. Understanding what engagement is and how and why it is carried out in CSR provides a framework for understanding engagement in public relations.