Avaliação da resistência à corrosão da liga Ti-30Ta submetida a diferentes taxas de deformação visando aplicações biomédicas

This study aims to evaluate the corrosion resistance of Ti-30Ta alloy when subjected to different strain rates. Samples of the alloy Ti-30Ta were obtained from the melting of pure elements in the arc furnace in inert atmosphere (argon gas). Then, the samples were subjected to a thermal treatment and to cold worked to obtain bars. After forging, the samples were machined in accordance with ASTME9-09 standard for carried out compression tests. To microstructural characterization, samples were sectioned longitudinal and transversally and embedded in resin. After, the wet sanding and polishing were performed, followed by a chemical attack, in order to study the microstructure under an optical microscope. Microhardness was measured on the samples that were subjected to microstructural characterization by using microhardness tester. Phases were evaluated by x-rays diffraction. Corrosion tests were carried out to evaluate the influence of deformation on the corrosion resistance. Results show that microstructure was not influenced by deformation

Caracterização da liga Ti-15Zr visando aplicações biomédicas

With advances in health care, has been na increase of demand for material that could replace the functions of the human body parts, thus evolved biomedic prosthesis which today are responsible for the constant improvement of the quality of life. The Titanium alloys are widely used as implants due to its properties, like high mechanical resistance, biocompatibility and corrosion resistance, and the addition alloying elements like Zirconium, may improve some of those properties. Such properties are related to the microstructure and consequently to the type of processing performed. The purpose of this dissertation was to characterize the experimental alloy Ti15Zr after route of processsing and heat treatment in order to extend the knowledge about this alloy. The latter has been abtained by fusion of pure metals in a arc melting furnace with an inert argon atmosphere. The material has been homogenized in a tube furnace at 950ºC for 24h and cold worked by swaging, after that, bars with 10 mm of diameter were obtained by the process of rotary forging. The samples were solubilized at 900º C for 2 hours and quenched in water. After that, 4 samples were submitted to the aging, at 400º C, 450º C, 500º C and 550º C. The microstructure and phase analysis was done by optical microscopy and X-rays diffraction (XRD), the mechanical characterization was carried out by microhardness test and finally, evaluation of corrosion resistance of the alloy by electrochemical tests. The XRD and the optical microscopy made it possible to analyze that the heat treatment influenced the phase shifting from α to α', and probably affected the alloy hardness, at the first aged sample at 500º Chas been a sudden increase in the value of hardness, probably by appearance of omega phase, unwanted phase to the medical application duo to great fragility, and finally ... (Complete abstract click electronic access below)

A redescription of a common euryhaline cumacean from southern Brazil: Diastylis sympterygiae Bacescu & Queiroz, 1985 (Crustacea: Cumacea)

Diastylis sympterygiae Bacescu & Queiroz (1985) has been reported in many ecological studies conducted in the Patos Lagoon, southern Brazil. However, the original description of this species is based on damaged specimens from stomach contents of rays, and therefore insufficient for a confident identification. In the present contribution, based on a large number of well-preserved specimens now available from the type locality area, the description of this common euryhaline species is completed and its range of distribution as far north as Sao Paulo is extended.

A new species of the neotropical catfish genus Trichomycterus (Siluriformes : Trichomycteridae) representing a new body shape for the family

Trichomycterus crassicaudatus is described as a new species from the Rio Iguacu basin in southern Brazil. The new species has an exceptionally deep posterior region of the body (caudal peduncle depth 22.8-25.4% SL), resulting in an overall shape which distinguishes it at once from all other members of the Trichomycteridae. The caudal fin of the species is broad-based and forked, a shape also distinguishing it from all other species in the family. A number of autapomorphic modifications of T. crassicaudatus are associated with the deepening of the caudal region, including an elongation of the hemal and neural spines of the vertebrae at the middle of the caudal peduncle. Phylogenetic relationships of the new species are yet unresolved, but it shares a similar color pattern and a thickening of caudal-fin procurrent rays with T. stawiarski, a poorly-known species also from the Rio Iguacu basin. Coloration and body shape also include similarities with T. lewi from Venezuela.

Knodus dorsomaculatus (Characiformes: Characidae), a new species from Teles Pires River, Tapajos River basin, Brazil

Knodus dorsomaculatus, a new species, is described from Teles Pires River, a tributary of the Tapajos River, Brazil. It can be distinguished from its congeners by the presence of a conspicuous dark blotch on the base of the first five branched dorsal fin rays and the presence of ii,9 dorsal fin rays. Additional comparisons between K. dorsomaculatus and its congeners are presented.

New Species of the Thorny Catfish Genus Leptodoras (Siluriformes: Doradidae) from Rio Fresco, Xingu Basin, Brazil

A new species of the thorny catfish genus Leptodoras (family Doradidae) is described. The new species shares three characters with its congeners, the modified oral hood with distinct upper labial extensions, the first gill arch with enlarged accessory lamellae extending well onto medial face of gill filaments, and the pelvic fin inserted in anterior half of body. The new species is distinguished from congeners by having a large dark submarginal blotch on distal half of dorsal-fin spine and anteriormost dorsal-fin branched rays, lower labial extension of modified oral hood extending more posteriorly than upper labial extension, relatively few midlateral scutes, gas bladder moderately sized (not reduced), paired bony capsules on anteriormost vertebrae reduced to paired cup-like laminar ossifications separated by a triangular septum, pair of small, swelling-like diverticula on each side of the anterior chamber of gas bladder, a well-developed anterior nuchal plate, and nuchal foramina present. The new species was discovered from a single specimen collected in the rio Fresco, a tributary of the rio Xingu, and is described based on this and on additional material recently collected in the same area. A discussion of its placement within Leptodoras is also presented.

Two new species of Jupiaba (Characiformes: Characidae) from the rio Tapajos and rio Madeira drainages, Brazil, with an identification key to species of the genus

Two new species of Jupiaba Zanata are described from Brazil. Jupiaba iasy, new species, is described from rio Teles Pires and rio Jamanxim, tributaries of rio Tapajos, and from rio Aripuana, in the rio Madeira drainage. It is distinguished from its congeners by its color pattern consisting of a single posteriorly displaced dark crescent-shaped humeral blotch, situated over the first 5 to 7 lateral line scales, and an inconspicuous dark spot at the end of caudal peduncle. It also differs from all remaining Jupiaba for the following combination of characters: 34-36 lateral line scales, 19-21 branched anal-fin rays, 8-10 predorsal scales arranged in a regular row, 6 horizontal series of scales above and 4 series below lateral line, body depth 32.3-36.1% of SL, and absence of filamentous rays in the first dorsal and anal-fin rays. Jupiaba paranatinga, new species, is described from rio Teles Pires, tributary of rio Tapajos. It is distinguished by having 34-35 lateral line scales, two vertically elongated humeral blotches, a conspicuous caudal spot at the end of the caudal peduncle, extending over 8-10 median caudal-fin rays, eye diameter 43.7-46.9% of HL, and relatively low body depth (31.3-35.5% of SL). Additionally, comments on the putative relationships of the new species with their congeners and an updated key to the species of the genus are provided.

A new genus and species of inseminating characid fish from the rio Xingu basin (Characiformes: Characidae)

Phallobrycon adenacanthus, is described as a new genus and species belonging to Clade A characids of Malabarba & Weitzman (2003). The new taxon is the only characid possessing two developed spines on unbranched portions of fifth, sixth and seventh anal-fin rays associated with intumescent glandular tissue on the anterior portion of the anal fin of sexually mature males. Other non-exclusive diagnostic features of the new genus (observed in male specimens) are: urogenital papilla modified into a copulatory organ, absence of pelvic-fin hooks and glandular tissue not organized into an organ. The presence of these features in members of Clade A and other characids is discussed in order to hypothesize the relationships of Phallobrycon.

Synthesis and characterization of silver/alanine nanocomposites for radiation detection in medical applications: the influence of particle size on the detection properties

Silver/alanine nanocomposites with varying mass percentage of silver have been produced. The size of the silver nanoparticles seems to drive the formation of the nanocomposite, yielding a homogeneous dispersion of the silver nanoparticles in the alanine matrix or flocs of silver nanoparticles segregated from the alanine crystals. The alanine crystalline orientation is modified according to the particle size of the silver nanoparticles. Concerning a mass percentage of silver below 0.1%, the nanocomposites are homogeneous, and there is no particle aggregation. As the mass percentage of silver is increased, the system becomes unstable, and there is particle flocculation with subsequent segregation of the alanine crystals. The nanocomposites have been analyzed by transmission electron microscopy (TEM), UV-Vis absorption spectroscopy, X-ray diffraction (XRD), and Fourier transform infrared (FTIR) spectroscopy and they have been tested as radiation detectors by means of electron spin resonance (ESR) spectroscopy in order to detect the paramagnetic centers created by the radiation. In fact, the sensitivity of the radiation detectors is optimized in the case of systems containing small particles (30 nm) that are well dispersed in the alanine matrix. As the agglomeration increases, particle growth (up to 1.5 mu m) and segregation diminish the sensitivity. In conclusion, nanostructured materials can be used for optimization of alanine sensitivity, by taking into account the influence of the particles size of the silver nanoparticles on the detection properties of the alanine radiation detectors, thus contributing to the construction of small-sized detectors.

Thallium Bromide Deposited Using Spray Coating

Spray coating was used to produce thallium bromide samples on glass substrates. The influence of several fabrication parameters on the final structural properties of the samples was investigated. Substrate position, substrate temperature, solution concentration, carrying gas, and solution flow were varied systematically, the physical deposition mechanism involved in each case being discussed. Total deposition time of about 3.5 h can lead to 62-mu m-thick films, comprising completely packed micrometer-sized crystalline grains. X-ray diffraction and scanning electron microscopy were used to characterize the samples. On the basis of the experimental data, the optimum fabrication conditions were identified. The technique offers an alternative method for fast, cheap fabrication of large-area devices for the detection of high-energy radiation, i.e., X-rays and gamma-rays, in medical imaging.

Results from KASCADE-Grande

The KASCADE-Grande experiment, located at Karlsruhe Institute of Technology (Germany) is a multi-component extensive air-shower experiment devoted to the study of cosmic rays and their interactions at primary energies 10(14)-10(18) eV. Main goals of the experiment are the measurement of the all-particle energy spectrum and mass composition in the 10(16)-10(18) eV range by sampling charged (N-ch) and muon (N-mu) components of the air shower. The method to derive the energy spectrum and its uncertainties, as well as the implications of the obtained result, is discussed. An overview of the analyses performed by KASCADE-Grande to derive the mass composition of the measured high-energy comic rays is presented as well. (C) 2012 Elsevier By. All rights reserved.

Reconnection studies under different types of turbulence driving

We study a model of fast magnetic reconnection in the presence of weak turbulence proposed by Lazarian and Vishniac (1999) using three-dimensional direct numerical simulations. The model has been already successfully tested in Kowal et al. (2009) confirming the dependencies of the reconnection speed V-rec on the turbulence injection power P-inj and the injection scale l(inj) expressed by a constraint V-rec similar to P(inj)(1/2)l(inj)(3/4)and no observed dependency on Ohmic resistivity. In Kowal et al. (2009), in order to drive turbulence, we injected velocity fluctuations in Fourier space with frequencies concentrated around k(inj) = 1/l(inj), as described in Alvelius (1999). In this paper, we extend our previous studies by comparing fast magnetic reconnection under different mechanisms of turbulence injection by introducing a new way of turbulence driving. The new method injects velocity or magnetic eddies with a specified amplitude and scale in random locations directly in real space. We provide exact relations between the eddy parameters and turbulent power and injection scale. We performed simulations with new forcing in order to study turbulent power and injection scale dependencies. The results show no discrepancy between models with two different methods of turbulence driving exposing the same scalings in both cases. This is in agreement with the Lazarian and Vishniac (1999) predictions. In addition, we performed a series of models with varying viscosity nu. Although Lazarian and Vishniac (1999) do not provide any prediction for this dependence, we report a weak relation between the reconnection speed with viscosity, V-rec similar to nu(-1/4).

Gamma Radiation Effects on Peanut Skin Antioxidants

Peanut skin, which is removed in the peanut blanching process, is rich in bioactive compounds with antioxidant properties. The aims of this study were to measure bioactive compounds in peanut skins and evaluate the effect of gamma radiation on their antioxidant activity. Peanut skin samples were treated with 0.0, 5.0, 7.5, or 10.0 kGy gamma rays. Total phenolics, condensed tannins, total flavonoids, and antioxidant activity were evaluated. Extracts obtained from the peanut skins were added to refined-bleached-deodorized (RBD) soybean oil. The oxidative stability of the oil samples was determined using the Oil Stability Index method and compared to a control and synthetic antioxidants (100 mg/kg BHT and 200 mg/kg TBHQ). Gamma radiation changed total phenolic content, total condensed tannins, total flavonoid content, and the antioxidant activity. All extracts, gamma irradiated or not, presented increasing induction period (h), measured by the Oil Stability Index method, when compared with the control. Antioxidant activity of the peanut skins was higher than BHT. The present study confirmed that gamma radiation did not affect the peanut skin extracts' antioxidative properties when added to soybean oil.

Constraining H-0 in general dark energy models from Sunyaev-Zeldovich/X-ray technique and complementary probes

In accelerating dark energy models, the estimates of the Hubble constant, Ho, from Sunyaev-Zerdovich effect (SZE) and X-ray surface brightness of galaxy clusters may depend on the matter content (Omega(M)), the curvature (Omega(K)) and the equation of state parameter GO. In this article, by using a sample of 25 angular diameter distances of galaxy clusters described by the elliptical beta model obtained through the SZE/X-ray technique, we constrain Ho in the framework of a general ACDM model (arbitrary curvature) and a flat XCDM model with a constant equation of state parameter omega = p(x)/rho(x). In order to avoid the use of priors in the cosmological parameters, we apply a joint analysis involving the baryon acoustic oscillations (BA()) and the (MB Shift Parameter signature. By taking into account the statistical and systematic errors of the SZE/X-ray technique we obtain for nonflat ACDM model H-0 = 74(-4.0)(+5.0) km s(-1) Mpc(-1) (1 sigma) whereas for a fiat universe with constant equation of state parameter we find H-0 = 72(-4.0)(+5.5) km s(-1) Mpc(-1)(1 sigma). By assuming that galaxy clusters are described by a spherical beta model these results change to H-0 = 6(-7.0)(+8.0) and H-0 = 59(-6.0)(+9.0) km s(-1) Mpc(-1)(1 sigma), respectively. The results from elliptical description are in good agreement with independent studies from the Hubble Space Telescope key project and recent estimates based on the Wilkinson Microwave Anisotropy Probe, thereby suggesting that the combination of these three independent phenomena provides an interesting method to constrain the Bubble constant. As an extra bonus, the adoption of the elliptical description is revealed to be a quite realistic assumption. Finally, by comparing these results with a recent determination for a, flat ACDM model using only the SZE/X-ray technique and BAO, we see that the geometry has a very weak influence on H-0 estimates for this combination of data.

Further investigating the determination of phosphorus in plants by INAA using bremsstrahlung measurement

Phosphorus is an essential element for plants and animals, playing a fundamental role in the production of biochemical energy. Despite its relevance, phosphorus is not commonly determined by instrumental neutron activation analysis (INAA), because (32)P does not emit gamma-rays in its decay. There are alternative methods for the determination of phosphorus by INAA, such as the use of beta counting or the measurement of bremsstrahlung originated from the high energy beta particle from (32)P. Here the determination of phosphorus in plant materials by measuring the bremsstrahlung production was further investigated, to optimize an analytical protocol for minimizing interferences and overcoming the poor specificity. Eight certified reference materials of plant matrices with phosphorus ranging between 171 and 5,180 mg kg(-1) were irradiated at a thermal neutron flux of 9.5 x 10(12) cm(-2) s(-1) and measured with a HPGe detector at decay times varying from 7 to 60 days. Phosphorus solutions added to a certified reference material at three levels were used for calibration. Counts accumulated in the baseline at four different regions of the gamma-ray spectra were tested for the determination of phosphorus, with better results for the 100 keV region. The Compton scattering contribution in the selected range was discounted using an experimental peak-to-Compton factor and the net areas of all peaks in the spectra with energies higher than 218 keV, i.e. Compton edge above 100 keV. Amongst the interferences investigated, the production of (32)P from sulfur, and the contribution of Compton scattering should be considered for producing good results.