Examination of the flow rheological and textural properties of polymer gels composed of poly(methylvinylether-co-maleic anhydride) and poly(vinylpyrrolidone): rheological and mathematical interpretation of textural parameters.

The purpose of this study was to mathematically characterize the effects of defined experimental parameters (probe speed and the ratio of the probe diameter to the diameter of sample container) on the textural/mechanical properties of model gel systems. In addition, this study examined the applicability of dimensional analysis for the rheological interpretation of textural data in terms of shear stress and rate of shear. Aqueous gels (pH 7) were prepared containing 15% w/w poly(methylvinylether-co-maleic anhydride) and poly(vinylpyrrolidone) (PVP) (0, 3, 6, or 9% w/w). Texture profile analysis (TPA) was performed using a Stable Micro Systems texture analyzer (model TA-XT 2; Surrey, UK) in which an analytical probe was twice compressed into each formulation to a defined depth (15 mm) and at defined rates (1, 3, 5, 8, and 10 mm s-1), allowing a delay period (15 s) between the end of the first and beginning of the second compressions. Flow rheograms were performed using a Carri-Med CSL2-100 rheometer (TA Instruments, Surrey, UK) with parallel plate geometry under controlled shearing stresses at 20.0°?±?0.1°C. All formulations exhibited pseudoplastic flow with no thixotropy. Increasing concentrations of PVP significantly increased formulation hardness, compressibility, adhesiveness, and consistency. Increased hardness, compressibility, and consistency were ascribed to enhanced polymeric entanglements, thereby increasing the resistance to deformation. Increasing probe speed increased formulation hardness in a linear manner, because of the effects of probe speed on probe displacement and surface area. The relationship between formulation hardness and probe displacement was linear and was dependent on probe speed. Furthermore, the proportionality constant (gel strength) increased as a function of PVP concentration. The relationship between formulation hardness and diameter ratio was biphasic and was statistically defined by two linear relationships relating to diameter ratios from 0 to 0.4 and from 0.4 to 0.563. The dramatically increased hardness, associated with diameter ratios in excess of 0.4, was accredited to boundary effects, that is, the effect of the container wall on product flow. Using dimensional analysis, the hardness and probe displacement in TPA were mathematically transformed into corresponding rheological parameters, namely shearing stress and rate of shear, thereby allowing the application of the power law (??=?k?n) to textural data. Importantly, the consistencies (k) of the formulations, calculated using transformed textural data, were statistically similar to those obtained using flow rheometry. In conclusion, this study has, firstly, characterized the relationships between textural data and two key instrumental parameters in TPA and, secondly, described a method by which rheological information may be derived using this technique. This will enable a greater application of TPA for the rheological characterization of pharmaceutical gels and, in addition, will enable efficient interpretation of textural data under different experimental parameters.

Microcirculatory hemodynamics and endothelial dysfunction in systemic lupus erythematosus.

OBJECTIVE: Impaired flow-mediated dilation (FMD) occurs in disease states associated with atherosclerosis, including SLE. The primary hemodynamic determinant of FMD is wall shear stress, which is critically dependent on the forearm microcirculation. We explored the relationship between FMD, diastolic shear stress (DSS), and the forearm microcirculation in 32 patients with SLE and 19 controls. METHODS AND RESULTS: DSS was calculated using (mean diastolic velocity x 8 x blood viscosity)/baseline brachial artery diameter. Doppler velocity envelopes from the first 15 seconds of reactive hyperemia were analyzed for resistive index (RI), and interrogated in the frequency domain to assess forearm microvascular hemodynamics. FMD was significantly impaired in SLE patients (median, 2.4%; range, -2.1% to 10.7% versus median 5.8%; range, 1.9% to 14%; P

Fate of inflammatory neutrophils within the joint

OBJECTIVE: Impaired flow-mediated dilation (FMD) occurs in disease states associated with atherosclerosis, including SLE. The primary hemodynamic determinant of FMD is wall shear stress, which is critically dependent on the forearm microcirculation. We explored the relationship between FMD, diastolic shear stress (DSS), and the forearm microcirculation in 32 patients with SLE and 19 controls. METHODS AND RESULTS: DSS was calculated using (mean diastolic velocity x 8 x blood viscosity)/baseline brachial artery diameter. Doppler velocity envelopes from the first 15 seconds of reactive hyperemia were analyzed for resistive index (RI), and interrogated in the frequency domain to assess forearm microvascular hemodynamics. FMD was significantly impaired in SLE patients (median, 2.4%; range, -2.1% to 10.7% versus median 5.8%; range, 1.9% to 14%; P

Mouse Uterine Natural Killer Cell Functions During Early Pregnancy

Early pregnancy is characterized by complex interactions between blood vessels, leukocytes, and conceptus-derived trophoblasts within the gestational uterus. Uterine Natural Killer (uNK) cells become the most abundant leukocyte during decidualization and produce a wide array of angiogenic factors, yet little is known regarding their early pregnancy functions. To characterize the role(s) of uNK cells, whole mount in situ immunohistochemistry of live early implant sites was performed. A timecourse examination of murine early pregnancy (virgin, and gd4.5-9.5) implantation sites was performed. Comparison of Gd6.5, 8.5 and 9.5 implant sites from BALB/c+/+ controls (BALB/c) and BALB/c-Rag2-/-Il2rg-/- (alymphoid) identified anomalies that result from the absence of lymphocytes. In alymphoid decidua basalis, mesometrial angiogenesis was widespread but pruning of nascent vessels within alymphoid decidua basalis was deficient. As early gestation progressed, vessels of alymphoid decidua basalis showed no evidence for remodeling. Alymphoid implantation sites showed ~24h delay in uterine lumen closure and embryonic development. To determine if uNK cells would normalize the anomalies observed in alymphoid implantation sites, adoptive cell transfer of NK+ B- T- marrow to alymphoid mice was performed. All of the above anomalies were reversed by adoptive transfer of NK+B-T- marrow. My results suggest that uNK cells support vascular growth and development which ensures the decidua can support the growing conceptus early in pregnancy prior to formation and function of the placenta. Human decidual NK cells may fill similar roles and be important targets for strategies designed to correct intra-uterine growth restriction.

Crystallization and phase transformation behaviour of electroless nickel-phosphorus deposits with low and medium phosphorus contents under continuous heating

Electroless nickel-phosphorus deposits with 5-8 wt% P and 3-5 wt% P were analysed for the effects of continuous heating on the crystallization kinetics and phase transformation behaviour of the deposits. The as-deposited coatings consist of a mixture of amorphous and microcrystalline nickel phases, featuring in their X-ray diffraction patterns. Continuous heating processes to 300C-800C at 20C/min were carried out on the deposits in a differential scanning calorimetric apparatus. The subsequent X-ray diffraction analyses show that the sequence of phase transformation process was: amorphous phase + microcrystalline nickel, f.c.c. nickel + Ni3P stable phases. Preferred orientation of nickel {200} plane developed in the deposits after the heating processes. Differential scanning calorimetry of the deposits indicates that the crystallization temperatures increased with decreasing phosphorus content, and increasing heating rate. Crystallization activation energies of the deposits (230 and 322 kJ/mol, respectively) were calculated using the peak temperatures of crystallization process, from the differential scanning calorimetric curves at the heating rates ranging from 5 to 50C/min. It was found that the deposit with lower phosphorus content has higher activation energy.

Surface plasmon polariton propagation across a gentle silver step

Surface plasmon polaritons (SPPs) are excited with light of wavelength lambda (1) = 632.8 nm on or near a gentle Ag/Ag step structure using focused beam, prism coupling and detected using a bare, sharpened fibre tip. The tip-sample separation is controlled by means of an evanescent optical field at wavelength lambda (2) = 543.5 nm in a photon scanning tunnelling microscope (PSTM). The SPP propagation properties are first characterised on both the thin and thick sections of the Ag film structure either side of the step, both macroscopically, using attenuated total reflection, and microscopically from the PSTM images; the two techniques yield very good agreement. It is found that the SPP propagation length is similar to 10-11 mum across the step in each direction (thick to thin and vice versa) as observed in the PSTM images. Thus, with reference to the propagation lengths of 14.2 and 11.7 mum for the thick and thin planar parts of the Ag film respectively, it is concluded that the SPPs negotiate the step reasonably successfully. Importantly, also, it is shown that images may be produced, displaying SPPs with either an artificially enhanced (similar to 15-20 mum) or truncated (5-8 mum) propagation length across the step. Consideration of such images leads us to suggest the possibility that the photon tunnelling occurs in a local water environment. (C) 2001 Elsevier Science B.V. All rights reserved.

Atomic excitation during recollision-free ultrafast multi-electron tunnel ionization

Modern intense ultrafast pulsed lasers generate an electric field of sufficient strength to permit tunnel ionization of the valence electrons in atoms(1). This process is usually treated as a rapid succession of isolated events, in which the states of the remaining electrons are neglected(2). Such electronic interactions are predicted to be weak, the exception being recollision excitation and ionization caused by linearly polarized radiation(3). In contrast, it has recently been suggested that intense field ionization may be accompanied by a two-stage 'shake-up' reaction(4). Here we report a unique combination of experimental techniques(5-8) that allows us to accurately measure the tunnel ionization probability for argon exposed to 50-fs laser pulses. Most significantly for the current study, this measurement is independent of the optical focal geometry(7,8), equivalent to a homogenous electric field. Furthermore, circularly polarized radiation negates recollision. The present measurements indicate that tunnel ionization results in simultaneous excitation of one or more remaining electrons through shake-up(9). From an atomic physics standpoint, it may be possible to induce ionization from specific states, and will influence the development of coherent attosecond extreme-ultraviolet-radiation sources(10). Such pulses have vital scientific and economic potential in areas such as high-resolution imaging of in vivo cells and nanoscale extreme-ultraviolet lithography.

Kinestatin: a novel bradykinin B2 receptor antagonist peptide from the skin secretion of the Chinese toad, Bombina maxima

We have isolated a novel bradykinin B2-receptor antagonist peptide, kinestatin, from toad (Bombina maxima) defensive skin secretion. Mass spectroscopy established a molecular mass of 931.56 Da and a provisional structure: pGlu-Leu/Ile-Pro-Gly-Leu/Ile-Gly-Pro-Leu/Ile-Arg.amide. The unmodified sequence, -QIPGLGPLRG-, was located at the C-terminus of a 116-amino-acid residue open-reading frame following interrogation of a sequenced B. maxima skin cDNA library database. This confirmed the presence of appropriate primary structural attributes for the observed post-translational modifications present on the mature peptide and established residue 2 as Ile and residues 5/8 as Leu. Kinestatin represents a prototype novel peptide from amphibian skin.

The sector of olive-oil cooperatives and the use of ICT: A comparative study regarding othe legal forms

The current global environment and the general increase in the spread and use of Information Technology and Communication (ICT) by companies and consumers, make the use of these technologies as essential to confront the growing competition in the market. Focused on this sector, in this research we analyze the use of electronic commerce, as through websites as through electronic markets, and the use of social networking tools as enablers of business. For this aim, we conducted a comparative analysis between the Andalusian olive oil cooperatives and other legal forms which are present in the sector.

Filling Ability and Passing Ability of Self-Consolidating Concrete

This paper reviews statistical models obtained from a composite factorial design study, which was carried out to determine the influence of three key parameters of mixture composition on filling ability and passing ability of self-consolidating concrete (SCC). This study was a part of the European project “Testing SCC”- GRD2-2000-30024. The parameters considered in this study were the dosages of water and high-range water-reducing admixture (HRWRA), and the volume of coarse aggregates. The responses of the derived statistical models were slump flow, T50 , T60, V-funnel flow time, Orimet flow time, and blocking ratio (L-box). The retention of these tests was also measured at 30 and 60 minutes after adding the first water. The models are valid for mixtures made with 188 to 208 L/m3 (317 to 350 lb/yd3) of water, 3.8 to 5.8 kg/m3 (570 to 970 mL/100 kg of binder) of HRWRA, and 220 to 360 L/m3 (5.97 to 9.76 ft3/yd3) of coarse aggregates. The utility of such models to optimize concrete mixtures and to achieve a good balance between filling ability and passing ability is discussed. Examples highlighting the usefulness of the models are presented using isoresponse surfaces to demonstrate single and coupled effects of mixture parameters on slump flow, T50 , T60 , V-funnel flow time, Orimet flow time, and blocking ratio. The paper also illustrates the various trade-offs between the mixture parameters on the derived responses that affected the filling and the passing ability.

Impact of antibiotics on conjugational resistance gene transfer in Staphylococcus aureus in sewage.

Ohlsen K, Ternes T, Werner G, Wallner U, Löffler D, Ziebuhr W, Witte W, Hacker J. Institute for Molecular Biology of Infectious Diseases, The University of Würzburg, Röntgenring 11, D-97070 Würzburg, Germany. knut.ohlsen@mail.uni-wuerzburg.de The growing rate of microbial pathogens becoming resistant to standard antibiotics is an important threat to public health. In order to assess the role of antibiotics in the environment on the spread of resistance factors, the impact of subinhibitory concentrations of antibiotics in sewage on gene transfer was investigated using conjugative gentamicin resistance (aacA-aphD) plasmids of Staphylococcus aureus. Furthermore, the concentration of antibiotics in hospital sewage was measured by high-performance liquid chromatography (HPLC)-electrospray tandem mass spectrometry. Several antibiotics were found to be present in sewage, e.g. ciprofloxacin up to 0.051 mgl(-1) and erythromycin up to 0.027 mgl(-1). Resistance plasmid transfer occurred both on solidified (dewatered) sewage and in liquid sewage in a bioreactor with a frequency of 1.1x10(-5)-5.0x10(-8). However, low-level concentrations of antibiotics measured in sewage are below concentrations that can increase plasmid transfer frequencies of gentamicin resistance plasmids of staphylococci.

Germanium on Sapphire By Wafer Bonding

This paper describes the creation of a germanium on sapphire platform, via wafer bonding technology, for system-on-a-chip applications. Similar thermal coefficients of expansion between germanium (5.8 x 10-6 K-1) and sapphire (5 x 10-6 K-1) make the bonding of germanium to sapphire a reality. Germanium directly bonded to sapphire results in microvoid generation during post bond annealing. Inclusion of an interface layer such as silicon dioxide layer by plasma enhanced chemical vapour deposition, prior to bonding, results in a microvoid free bond interface after annealing. Grinding and polishing of the subsequent germanium layer has been achieved leaving a thick germanium on sapphire (GeOS) substrate. Submicron GeOS layers have also been achieved with hydrogen/helium co-implantation and layer transfer. Circular geometry transistors exhibiting a field effect mobility of 890 cm2/V s have been fabricated onto the thick germanium on sapphire layer.

Cardiovascular disease risk profiles among 'healthy' siblings of patients with early-onset cardiovascular disease:Application of the new SCORE system

BACKGROUND: Cardiovascular disease (CVD) occurs more frequently in individuals with a family history of premature CVD. Within families the demographics of CVD are poorly described. DESIGN: We examined the risk estimation based on the Systematic Coronary Risk Evaluation (SCORE) system and the Joint British Guidelines (JBG) for older unaffected siblings of patients with premature CVD (onset ≤55 years for men and ≤60 years for women). METHODS: Between August 1999 and November 2003 laboratory and demographic details were collected on probands with early-onset CVD and their older unaffected siblings. Siblings were screened for clinically overt CVD by a standard questionnaire and 12-lead electrocardiogram (ECG). RESULTS: A total of 790 siblings was identified and full demographic details were available for 645. The following siblings were excluded: 41 with known diabetes mellitus; seven with random plasma glucose of 11.1 mmol/l or greater; and eight with ischaemic ECG. Data were analysed for 589 siblings from 405 families. The mean age was 55.0 years, 43.1% were men and 28.7% were smokers. The mean total serum cholesterol was 5.8 mmol/l and hypertension was present in 49.4%. Using the SCORE system, when projected to age 60 years, 181 men (71.3%) and 67 women (20.0%) would be eligible for risk factor modification. Using JBG with a 10-year risk of 20% or greater, 42 men (16.5%) and four women (1.2%) would be targeted. CONCLUSIONS: Large numbers of these asymptomatic individuals meet both European and British guidelines for the primary prevention of CVD and should be targeted for risk factor modification. The prevalence of individuals defined as eligible for treatment is much higher when using the SCORE system. © 2007 European Society of Cardiology.