Avaliação ultrassonográfica de crianças com hipotireoidismo congênito

To establish benchmarks and study some sonographic characteristics of the thyroid gland in a group of euthyroid children aged up to 5 years as compared with age-matched children with congenital hypothyroidism. Thirty-six children (17 female and 19 male) aged between 2 months and 5 years were divided into two groups - 23 euthyroid children and 13 children with congenital hypothyroidism - and were called to undergo ultrasonography. In the group of euthyroid children (n = 23), mean total volume of the thyroid gland was 1.12 mL (minimum, 0.39 mL; maximum, 2.72 mL); a homogeneous gland was found in 17 children (73.91%) and 6 children (26.08%) had a heterogeneous gland. In the group of children with congenital hypothyroidism (n = 13), mean total volume of the thyroid gland was 2.73 mL (minimum, 0.20 mL; maximum, 11.00 mL). As regards thyroid location, 3 patients (23.07%) had ectopic thyroid, and 10 (69.23%) had topic thyroid, and out of the latter, 5 had a homogeneous gland (50%) and 5, a heterogeneous gland (50%). In the group with congenital hypothyroidism, 6 (46.15%) children had etiological diagnosis of dyshormoniogenesis, 3 (23.07%), of ectopic thyroid, and 4 (30.76%), of thyroid hypoplasia. Thyroid ultrasonography is a noninvasive imaging method, widely available, easy to perform and for these reasons could, and should, be performed at any time, including at birth, with no preparation or treatment discontinuation, to aid in the early etiological definition of congenital hypothyroidism.

Aspectos ultrassonográficos da glândula tireoide hígida em equinos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação hepática de cães naturalmente infectados por leishmaniose visceral canina: aspectos ultrassonográficos modo B e Doppler

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo neuroanatômico do éncefalo bovino por ressonância magnética

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Pré-eclâmpsia e risco de alterações no ultrassom de crânio de recém-nascidos prematuros

Pós-graduação em Ginecologia, Obstetrícia e Mastologia - FMB

Angiogênese, vascularização e uso do ultrassom Doppler colorido como ferramenta de avaliação das estruturas ovarianas

Angiogenesis occurs as a physiologic process and is essential for normal growth and development of tissue. The ovary and its structures need adequate vascular network to ensure the availability of oxygen, nutrients, hormones, substrate, and ensure the transfer of different hormones to target cells. Then, the proper formation of this network is a limiting step for the proper functioning of this organ in general. In recent years, the local blood flow of the ovary, has been examined by color Doppler ultrasound, being able to analyze the individual follicles and the corpus luteum. This review will board the relevant aspects of the restructuring vascular ovary during the estrous cycle in female domestic large.

Influência do formato do rebordo alveolar sagital em reabilitações com associação de prótese parcial removível de extremidade livre e implante ósseo integrado

The association of mandibular distal extension removable partial dentures with an osteointegrated implant is a treatment option at hasn't been fully explored by modern rehabilitation dentistry yet. The objective of this study is to evaluate, by means of the bidimensional method of finite elements, the distribution of tension on the structures supporting the distal extension removable partial denture (DERPD), associated to a 10.0 x 3.75 mm osteointegrated implant with an ERA retention system, in alveolar ridges of different shapes. Eight models were created, representing, from a sagittal perspective: Model A (MA) – a half arch with a horizontal ridge without posterior support, with the presence of the lower left canine, and a conventional DERPD, with metallic support in the incisal aspect of this canine, as replacement for the first and second pre-molars and the first and second molars of the lower left half arch; Model B (MB) – similar to MA, but different because of the presence of a 3.75 x 10.00 mm implant with an associated ERA retention system in the posterior region of the DERPD base; Model C (MC) - similar to MA, however with a distally ascending ridge format; Model D (MD) – similar to MC, but different because there is an implant associated to a retention system; Model E (ME) - similar to MA, however with a distally descending ridge format; Model F (MF) – similar to ME, but ditfferent in the sense that there is an implant with an associated ERA retention system; Model G (MG) – similar to MA, however with a distally descending-ascending ridge format; Model H (MH) – similar to MG, but different in the sense that there is an implant with an associated ERA retention system. The finite element program ANSYS 9.0 was used to load the models with vertical forces of 50 N, on each cuspid tip. The format of distal descending edge (ME and MF) was that presented worse results, so in the models with conventional RPD as in the models with RPD associated to the implant and ERA system of retention, for the structures gingival mucosa and tooth support. 1) the distally descending ridge presented the most significant stress in the model with the conventional RPD (ME) or with a prosthesis associated to an implant (MF) and 2) the horizontal ridge (MB) provided more relief to the support structures, such as the tooth and the spongy bone, when there was an implant associated to an ERA retention system. The incorporation of the implants with the ERA system retention, in the posterior area of the toothless edge, it promotes larger stability and retention to PPREL, improving the patient's masticatory acting and, consequently, its comfort and function.

The influence of the alveolar ridge shape on the stress distribution in a free-end saddle removable partial denture supported by implant

The alveolar ridge shape plays an important role in predicting the demand on the support tooth and alveolar bone in the removable partial denture (RPD) treatment. However, these data are unclear when the RPD is associated with implants. This study evaluated the influence of the alveolar ridge shape on the stress distribution of a free-end saddle RPD partially supported by implant using 2-dimensioanl finite element analysis (FEA). Four mathematical models (M) of a mandibular hemiarch simulating various alveolar ridge shapes (1-distal desceding, 2- concave, 3-horizontal and 4-distal ascending) were built. Tooth 33 was placed as the abutment. Two RPDs, one supported by tooth and fibromucosa (MB) and other one supported by tooth and implant (MC) were simulated. MA was the control (no RPD). The load (50N) were applied simultaneously on each cusp. Appropriate boundary conditions were assigned on the border of alveolar bone. Ansys 10.0 software was used to calculate the stress fields and the von Mises equivalent stress criteria (σvM) was applied to analyze the results. The distal ascending shape showed the highest σvM for cortical and medullar bone. The alveolar ridge shape had little effect on changing the σvM based on the same prosthesis, mainly around the abutment tooth.

Mensurações do bulbo ocular e cálculo do poder dióptrico da lente intraocular em miniporcos brasileiros

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desempenho e qualidade da carne de bovinos cruzados alimentados com diferentes dietas em confinamento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

O espaço-tempo não comutativo em Teoria Quântica de Campos, Matéria Condensada Mole e Física Biológica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Contribuições do design gráfico para o design de superfície

Graphic Design is a profession established with advent artistic vanguards of the twentieth century. As professional activity, it works with planning and projects which involve the visual solution of communication and information problems. Then, The Surface Design is the professional practice pledged with the elaboration of projects for coatings and application in products, giving attention to the production and materials in the processes. The relation between both Design areas is connected, at first, by the two-dimensional characteristic. In Brazil, academic study about Surface Design is in evolution and some universities works with this subject. Analyzing the concepts and characteristics concerning methodologies that comprehend both Graphic Design and Surface Design becomes a current and including subject. Therefore, it is necessary the conceptual unfolding and methodological in order to establish relations and contributions involved in the field of Graphic Design and apply them in Surface Design. Thus, the present study aimed to check concepts and particular functions of Graphic Design and to establish its relations and contributions for Surface Design. The results of this study can be used as teaching support and professional practice.

Um estudo sobre anisotropia plana usando o Método dos Elementos de Contorno

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fatores que afetam a expressão de estro detectado por monitores de atividade e riscos de concepção em vacas leiteiras lactantes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Investigação das propriedades ópticas, morfológicas e elétricas da heterojunção SnO2: Ce3+/ GaAs

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)