Depth dependent lattice disorder and strain in Mn-implanted and post-annealed InAs thin films

The lattice order degree and the strain in as-grown, Mn-implanted and post-implantedannealedInAsthinfilms were investigated with depth resolution by means of Rutherford backscattering spectrometry in channeling conditions (RBS/C). Three main crystallographic axes were analyzed for both In and As sublattices. The behaviour of the induced defects was evaluated in two regions with different native defects: the interface and the surface. The results show that Mn implantation and post-implantation annealing are anisotropic processes, affecting in a different way the In and As sublattices. The mechanisms influencing the enhancement and deterioration of the crystal quality during the implantation are discussed in relation to the as-grown defects and the segregation of the elements

Relaxationsverluste bei Vorspanndrähten

Spannbetonbauteile sind anfällig für Relaxationsverluste, deren Berücksichtigung für die Tragwerksplanung von signifikanter Bedeutung ist. Spanndrähte werden nach der Herstellung zur Vereinfachung von Lagerung und Transport auf Coils gewickelt. Eventuelle nachteilige Auswirkungen dieser Vorgehensweise auf das Relaxationsverhalten von Spannstahldrähten werden in der Regel vernachlässigt, obwohl Hersteller sowie Bauunternehmer durch Relaxationsversuche nach langen Lagerzeiten festgestellt haben, dass der Relaxationsverlust in einigen Fällen höher ausfiel als kurz nach der Herstellung. Daher wird der Einfluss des Aufwickelns auf den Relaxationsverlust durch eine experimentelle Untersuchung überprüft und durch die Anwendung eines einfachen Analysemodells bestätigt. Die Ergebnisse zeigen, dass einige Faktoren wie die Anfangsspannung, Langzeitlagerung oder Lagerung bei hohen Temperaturen Relaxationsverluste auslösen oder verstärken können. Es wird jedoch auch gezeigt, dass diese Auswirkungen unter Berücksichtigung der Anforderungen der entsprechenden Richtlinien (Mindest durch - messer Coil) vernachlässigt werden können.

Aula Web "Pensamiento Matemático". Un complemento a la enseñanza de las matemáticas

Al igual que otras asignaturas pero quizás de manera más pronunciada las matemáticas, están viendo reducidos en gran medida sus créditos en los nuevos planes de estudios. Por ello, ofertar acciones que posibiliten alcanzar competencias relacionadas con esta y otras ciencias básicas resulta de gran utilidad. Con este propósito, desde el Grupo de Innovación Educativa de la Universidad Politécnica de Madrid “Pensamiento Matemático”, se ofrece a los alumnos un “Aula de Pensamiento Matemático”. En ella se presentan una serie de actividades on-line que permiten la capacitación de los alumnos en diversas competencias transversales, la mayoría relacionadas con el pensamiento matemático.

An Autonomous Engine for Services Configuration and Deployment.

The runtime management of the infrastructure providing service-based systems is a complex task, up to the point where manual operation struggles to be cost effective. As the functionality is provided by a set of dynamically composed distributed services, in order to achieve a management objective multiple operations have to be applied over the distributed elements of the managed infrastructure. Moreover, the manager must cope with the highly heterogeneous characteristics and management interfaces of the runtime resources. With this in mind, this paper proposes to support the configuration and deployment of services with an automated closed control loop. The automation is enabled by the definition of a generic information model, which captures all the information relevant to the management of the services with the same abstractions, describing the runtime elements, service dependencies, and business objectives. On top of that, a technique based on satisfiability is described which automatically diagnoses the state of the managed environment and obtains the required changes for correcting it (e.g., installation, service binding, update, or configuration). The results from a set of case studies extracted from the banking domain are provided to validate the feasibility of this proposa

Comparative study of the pathogenicity of seabed isolates of Fusarium equiseti and the effect of the composition of the mineral salt medium and temperature on mycelia growth

The pathogenicity of seven strains of Fusarium equiseti isolated from seabed soil was evaluated on different host plants showing pre and post emergence damage. Radial growth of 27 strains was measured on culture media previously adjusted to different osmotic potentials with either KCl or NaCl (-1.50 to - 144.54 bars) at 15º, 25º and 35º C. Significant differences and interactive effects were observed in the response of mycelia to osmotic potential and temperature.

Eliminación de compuestos volátiles olorosos por electrocoagulación

La emisión de olores en las depuradoras de aguas residuales representa un impacto significativo. En este sentido, resulta de especial interés la electrocoagulación, como procedimiento de tratamiento de compuestos olorosos presentes en aguas residuales. Durante la presente investigación se ha estudiado la eliminación de los siguientes compuestos volátiles olorosos mediante el proceso de electrocoagulación: sulfuro de carbono, tolueno y diclorometano. Se ha investigado el efecto del diseño del reactor (configuración de una fuente, configuración de 2 fuentes seguidas y configuración de 2 fuentes separadas), naturaleza de los electrodos (aluminio), y corriente eléctrica aplicada (0,5A, 2A, 4A, 6A, 8A y 9,5A). Se observaron rendimientos satisfactorios para el sulfuro de carbono y se determinó un rendimiento óptimo mediante electrodos de aluminio separados entre sí 2,5cm, utilizando la configuración de 1 fuente, y aplicando intensidades muy bajas (0,5A). En referencia al tolueno se apreció un ligero rendimiento, mientras que no se observó acción significativa sobre el diclorometano. La configuración de 1 fuente, además de haber presentado los mejores rendimientos para el sulfuro de carbono y el tolueno, requiere un suministro de energía inferior y menores tiempos de retención.

Dynamic Model-based Management of Service-Oriented Infrastructure.

Models are an effective tool for systems and software design. They allow software architects to abstract from the non-relevant details. Those qualities are also useful for the technical management of networks, systems and software, such as those that compose service oriented architectures. Models can provide a set of well-defined abstractions over the distributed heterogeneous service infrastructure that enable its automated management. We propose to use the managed system as a source of dynamically generated runtime models, and decompose management processes into a composition of model transformations. We have created an autonomic service deployment and configuration architecture that obtains, analyzes, and transforms system models to apply the required actions, while being oblivious to the low-level details. An instrumentation layer automatically builds these models and interprets the planned management actions to the system. We illustrate these concepts with a distributed service update operation.

A repository for integration of software artifacts with dependency resolution and federation support

While developing new IT products, reusability of existing components is a key aspect that can considerably improve the success rate. This fact has become even more important with the rise of the open source paradigm. However, integrating different products and technologies is not always an easy task. Different communities employ different standards and tools, and most times is not clear which dependencies a particular piece of software has. This is exacerbated by the transitive nature of these dependencies, making component integration a complicated affair. To help reducing this complexity we propose a model-based repository, capable of automatically resolve the required dependencies. This repository needs to be expandable, so new constraints can be analyzed, and also have federation support, for the integration with other sources of artifacts. The solution we propose achieves these working with OSGi components and using OSGi itself.

Fungal microbiota from rain water and pathogenicity of Fusarium species isolated from atmospheric dust and rainfall dust

In order to determine the presence of Fusarium spp. in atmospheric dust and rainfall dust, samples were collected during September 2007, and July, August, and October 2008. The results reveal the prevalence of airborne Fusarium species coming from the atmosphere of the South East coast of Spain. Five different Fusarium species were isolated from the settling dust: Fusarium oxysporum, F. solani, F. equiseti, F. dimerum, and F. proliferatum. Moreover, rainwater samples were obtained during significant rainfall events in January and February 2009. Using the dilution-plate method, 12 fungal genera were identified from these rainwater samples. Specific analyses of the rainwater revealed the presence of three species of Fusarium: F. oxysporum, F. proliferatum and F. equiseti. A total of 57 isolates of Fusarium spp. obtained from both rainwater and atmospheric rainfall dust sampling were inoculated onto melon (Cucumis melo L.) cv. Piñonet and tomato (Lycopersicon esculentum Mill.) cv. San Pedro. These species were chosen because they are the main herbaceous crops in Almeria province. The results presented in this work indicate strongly that spores or propagules of Fusarium are able to cross the continental barrier carried by winds from the Sahara (Africa) to crop or coastal lands in Europe. Results show differences in the pathogenicity of the isolates tested. Both hosts showed root rot when inoculated with different species of Fusarium, although fresh weight measurements did not bring any information about the pathogenicity. The findings presented above are strong indications that long-distance transmission of Fusarium propagules may occur. Diseases caused by species of Fusarium are common in these areas. They were in the past, and are still today, a problem for greenhouses crops in Almería, and many species have been listed as pathogens on agricultural crops in this region. Saharan air masses dominate the Mediterranean regions. The evidence of long distance dispersal of Fusarium spp. by atmospheric dust and rainwater together with their proved pathogenicity must be taken into account in epidemiological studies.

DBpedia spotlight: shedding light on the web of documents

Interlinking text documents with Linked Open Data enables the Web of Data to be used as background knowledge within document-oriented applications such as search and faceted browsing. As a step towards interconnecting the Web of Documents with the Web of Data, we developed DBpedia Spotlight, a system for automatically annotating text documents with DBpedia URIs. DBpedia Spotlight allows users to congure the annotations to their specic needs through the DBpedia Ontology and quality measures such as prominence, topical pertinence, contextual ambiguity and disambiguation condence. We compare our approach with the state of the art in disambiguation, and evaluate our results in light of three baselines and six publicly available annotation systems, demonstrating the competitiveness of our system. DBpedia Spotlight is shared as open source and deployed as a Web Service freely available for public use.

Multipedia: Enriching DBpedia with Multimedia Information

Enriching knowledge bases with multimedia information makes it possible to complement textual descriptions with visual and audio information. Such complementary information can help users to understand the meaning of assertions, and in general improve the user experience with the knowledge base. In this paper we address the problem of how to enrich ontology instances with candidate images retrieved from existing Web search engines. DBpedia has evolved into a major hub in the Linked Data cloud, interconnecting millions of entities organized under a consistent ontology. Our approach taps into the Wikipedia corpus to gather context information for DBpedia instances and takes advantage of image tagging information when this is available to calculate semantic relatedness between instances and candidate images. We performed experiments with focus on the particularly challenging problem of highly ambiguous names. Both methods presented in this work outperformed the baseline. Our best method leveraged context words from Wikipedia, tags from Flickr and type information from DBpedia to achieve an average precision of 80%.

A New End-User Composition Model to Empower Knowledge Workers to Develop Rich Internet Applications

Enabling real end-user programming development is the next logical stage in the evolution of Internetwide service-based applications. Even so, the vision of end users programming their own web-based solutions has not yet materialized. This will continue to be so unless both industry and the research community rise to the ambitious challenge of devising an end-to-end compositional model for developing a new age of end-user web application development tools. This paper describes a new composition model designed to empower programming-illiterate end users to create and share their own off-the-shelf rich Internet applications in a fully visual fashion. This paper presents the main insights and outcomes of our research and development efforts as part of a number of successful European Union research projects. A framework implementing this model was developed as part of the European Seventh Framework Programme FAST Project and the Spanish EzWeb Project and allowed us to validate the rationale behind our approach.

Experimental Model to estimate shading losses on PV arrays

This paper presents a simple mathematical model to estimateshadinglosses on PVarrays. The model is applied directly to power calculations, without the need to consider the whole current–voltage curve. This allows the model to be used with common yield estimation software. The model takes into account both the shaded fraction of the array area and the number of blocks (a group of solar cells protected by a bypass diode) affected by shade. The results of an experimental testing campaign on several shaded PVarrays to check the validity of model are also reported.

Evaluación del desarrollo de las tecnologías de almacenamiento de CO2

El dióxido de carbono (CO2 ) es un gas de efecto invernadero que se encuentra naturalmente en la atmósfera. Las actividades antropogénicas, especialmente las derivadas de la generación eléctrica a partir de combustibles fósiles, están causando que la concentración de este gas aumente significativamente en la atmósfera. Esta situación contribuye al conocido y mundialmente aceptado cambio climático. Dentro de las posibilidades que se barajan para reducir las emisiones a la atmósfera de gases de efecto invernadero destaca el desarrollo de las tecnologías de captura y almacenamiento de CO2 (CAC), las cuales son aplicables principalmente a los grandes focos industriales, como las centrales térmicas, cementeras, refinerías, acerías, industrias cerámicas, etc. Estas tecnologías consisten en la separación del CO2 emitido por dichos focos emisores, para posteriormente comprimirlo y obtener así una corriente concentrada de CO2 , la cual sería susceptible de transportarse e inyectarse en un almacén geológico a una profundidad superior a 800 m para que alcanzara el estado supercrítico. Por lo tanto, el almacenamiento geológico profundo (AGP) de CO2 representa la última etapa de las tecnologías CAC. Aunque se tiene bastante experiencia en el campo de la inyección de CO2 como método para recuperar los yacimientos de petróleo y/o gas, ya agotados o en vías de agotamiento, el concepto de almacenamiento geológico de CO2 , como método de evitar las emisiones de este gas a la atmósfera y mitigar así el efecto invernadero, es relativamente reciente.

Molecular Dynamics Simulations of Lead and Lithium in Liquid Phase

Pb17Li is today a reference breeder material in diverse fusion R&D programs worldwide. Extracting dynamic and structural properties of liquid LiPb mixtures via molecular dynamics simulations, represent a crucial step for multiscale modeling efforts in order to understand the suitability of this compound for future Nuclear Fusion technologies. At present a Li-Pb cross potential is not available in the literature. Here we present our first results on the validation of two semi-empirical potentials for Li and Pb in liquid phase. Our results represent the establishment of a solid base as a previous but crucial step to implement a LiPb cross potential. Structural and thermodynamical analyses confirm that the implemented potentials for Li and Pb are realistic to simulate both elements in the liquid phase.