Momento de ocurrencia, magnitud y reiteración de lluvias como determinante del lavado del grano de trigo y su efecto en la calidad comercial e industrial

p.45-53

Interacción genotipo por ambiente sobre caracteres de calidad comercial e industrial en trigo pan (Triticum aestivum L.)

El genotipo (G), el ambiente (A)y la interacción G x A pueden influir de manera diferente sobre las característica que definen la calidad comercial e industrial de trigo pan. Los objetivos de esta tesis fueron: 1)Caracterizar el rendimiento y a sus componentes en cultivares de trigo pertenecientes a diferentes grupos de calidad, expuestos a ofertas de nitrógeno contrastantes. 2)Estudiar el impacto de distinta disponibilidad de nitrógeno sobre los componentes fisiológicos del llenado de los granos (i.e tasa y duración)en distintaas variedades de trigo pan y su posible efecto sobre los parámetros de calidad. 3)Caracterizar y cuantificar la interacción genotipo por ambiente sobre la expresión de los parámetros que determinan el rendimiento y la calidad comercial e industrial del trigo pan en ambientes con diferentes disponibilidades de nitrógeno. Se realizaron ensayos en dos localidades, durante dos años, utilizando seis variedades de distinta aptitud panadera (2 de cada grupo de clasificación por grupo de calidad -GC-), aplicando cuatro tratamientos de fertilización nitrogenadas. Se evaluó el efecto genético, ambiental y la interacción G x A, sobre el rendimiento y sus componentes, el peso de los granos y sus componentes y sobre los parámetros de calidad comercial e industrial. Los resultados mostraron que el rendimiento y sus componentes (número de granos, biomasa aérea, eficiencia de uso de la radiación interceptada acumulada)fueron afectados principalmente por el ambiente y el manejo nutricional dentro de de cada ambiente. Para el peso de los granos y sus componentes (tasa y duración)el efecto del manejo del nitrógeno no fue importante, aunque sí lo fue el efecto genotipo. Para los parámetros de calidad el efecto genotipo fue más importante solo para la tenacidad, mientras que el peso hectolítrico, gluten húmedo, fuerza panadera, la relación de equilibrio (P/L)y volumen de pan fueron modificados principalmente por el efecto ambiente no manejable como son el año y la localidad, en tanto la proteína fue afectada principalmente por el factor ambiental asociado al manejo nutricional. La interacción GxA fue el efecto que explicó en mayor medida las variaciones de rendimiento de harina, absorción de agua y tiempo de amasado. La fuerte interacción GxA observada para la mayoría de los parámetros de calidad determinó que variedades de un determinado GC cambien de grupo asociado principalmente a factores ambientales como la localidad y el año, mientras que el manejo nutricional tuvo un impacto menor

Efecto del pastoreo del trigo sobre el rendimiento y la calidad industrial del grano

p.93-102

Basic components in the scienctific didactical training of the secondary school mathematics teachers

Secondary mathematics teacher training in Spain is currently the subject of a heated revision debate. The speed of social, cultural, scientific and economic changes have left a hundred years old teacher training model well behind. However, academical inertia and professional interests are impeding a real new training of the mathematics teacher as an autonomous mathematical educator. Teachers of Didactic of Mathematics and the Spanish Associations of mathematics teachers have recently been discussing the issue. Their conclusions are included here.

Modelling of industrial multi-physics processes—a key role for computational mechanics.

In the analysis of industrial processes, there is an increasing emphasis on systems governed by interacting continuum phenomena. Mathematical models of such multi-physics processes can only be achieved for practical simulations through computational solution procedures—computational mechanics. Examples of such multi-physics systems in the context of metals processing are used to explore some of the key issues. Finite-volume methods on unstructured meshes are proposed as a means to achieve efficient rapid solutions to such systems. Issues associated with the software design, the exploitation of high performance computers, and the concept of the virtual computational-mechanics modelling laboratory are also addressed in this context.

The airEXODUS evacuation model and its application to evacuation certification, crew training and accident investigation.

Computer based mathematical models describing the aircraft evacuation process have a vital role to play in the design and development of safer aircraft, in the implementation of safer and more rigorous certification criteria, cabin crew training and in post mortuum accident investigation. As the risk of personal injury and costs involved in performing large-scale evacuation experiments for the next generation 'Ultra High Capacity Aircraft' (UHCA) are expected to be high, the development and use of these evacuation modelling tools may become essential if these aircraft are to prove a viable reality. In this paper the capabilities and limitations of the airEXODUS evacuation model are described. Its successful application to the prediction of a recent certification trial, prior to the actual trial taking place, is described. Also described is a newly defined parameter known as OPS which can be used as a measure of evacuation trial optimality. In addition, sample evacuation simulations in the presence of fire atmospheres are described. Finally, the data requiremnets of the airEXODUS evacuation model is discussed along with several projects currently underway at the the Univesity of Greenwich designed to obtain this data. Included in this discussion is a description of the AASK - Aircraft Accident Statistics and Knowledge - data base which contains detailed information from aircraft accident survivors.

Bulk synchronous parallelization of industrial electromagentic software

The parallelization of existing/industrial electromagnetic software using the bulk synchronous parallel (BSP) computation model is presented. The software employs the finite element method with a preconditioned conjugate gradient-type solution for the resulting linear systems of equations. A geometric mesh-partitioning approach is applied within the BSP framework for the assembly and solution phases of the finite element computation. This is combined with a nongeometric, data-driven parallel quadrature procedure for the evaluation of right-hand-side terms in applications involving coil fields. A similar parallel decomposition is applied to the parallel calculation of electron beam trajectories required for the design of tube devices. The BSP parallelization approach adopted is fully portable, conceptually simple, and cost-effective, and it can be applied to a wide range of finite element applications not necessarily related to electromagnetics.

The specification and design of an interactive virtual environment for use in teacher training

The original concept was to create a 'simulation' which would provide trainee teachers, specializing in Information and Communications Technology (ICT) with the opportunity to explore a primary school environment. Within the simulation, factors affecting the development and implementation of ICT would be modelled so that trainees would be able to develop the skills, knowledge and understanding necessary to identify appropriate strategies to overcome the limitations. To this end, we have developed Allsorts Primary - the prototype of a simulated interactive environment, representing a typical primary school

Numerical predictions of particle degradation in industrial-scale pneumatic conveyors

This paper presents an Eulerian-based numerical model of particle degradation in dilute-phase pneumatic conveying systems including bends of different angles. The model shows reasonable agreement with detailed measurements from a pilot-sized pneumatic conveying system and a much larger scale pneumatic conveyor. The potential of the model to predict degradation in a large-scale conveying system from an industrial plant is demonstrated. The importance of the effect of the bend angle on the damage imparted to the particles is discussed.

Staff training in the mental health needs of people with learning disabilities in the UK

This paper gives a general overview of some of the factors involved in the training and knowledge of learning disabilities staff relating to mental health. Early indications from research have shown that training may be effective as a way of addressing these problems, but further research and clear guidance on best practice in implementing staff training are needed in this important area.

Industrial water pollution in Dhaka, Bangladesh: strategies and incentives for pollution control in small and medium enterprises

The extent and gravity of the environmental degradation of the water resources in Dhaka due to untreated industrial waste is not fully recognised in international discourse. Pollution levels affect vast numbers, but the poor and the vulnerable are the worst affected. For example, rice productivity, the mainstay of poor farmers, in the Dhaka watershed has declined by 40% over a period of ten years. The study found significant correlations between water pollution and diseases such as jaundice, diarrhoea and skin problems. It was reported that the cost of treatment of one episode of skin disease could be as high as 29% of the weekly earnings of some of the poorest households. The dominant approach to deal with pollution in the SMEs is technocratic. Given the magnitude of the problem this paper argues that to control industrial pollution by SMEs and to enhance their compliance it is necessary to move from the technocratic approach to one which can also address the wider institutional and attitudinal issues. Underlying this shift is the need to adopt the appropriate methodology. The multi-stakeholder analysis enables an understanding of the actors, their influence, their capacity to participate in, or oppose change, and the existing and embedded incentive structures which allow them to pursue interests which are generally detrimental to environmental good. This enabled core and supporting strategies to be developed around three types of actors in industrial pollution, i.e., (i) principal actors, who directly contribute to industrial pollution; (ii) stakeholders who exacerbate the situation; and (iii) potential actors in mitigation. Within a carrot-and-stick framework, the strategies aim to improve environmental governance and transparency, set up a packet to incentive for industry and increase public awareness.

Developing “middle leaders” in the public services? The realities of management and leadership development for public managers

Purpose – This paper aims to assess the actual contribution to organisational change of management and leadership development (MLD) activity for middle managers (MMs) in public service organisations (PSOs). Design/methodology/approach – Using the case study approach, the paper compares the content and outcomes of management and leadership training interventions for MMs in two large PSOs. The organisations, a fire brigade and a train operating company, are leaders in their sectors with respect to management development and “modernisation” of their services. Findings – The paper demonstrates how, in one case, MM development was largely an exercise in regulatory compliance, with little effect on individual MMs' performance or organisational outcomes. The second case demonstrates how MMs were effectively trained to enforce specific human resource policies which contributed to the successful implementation of top-down strategy yet paid little attention to the potential leadership role of MMs. Research limitations/implications – The paper highlights the need for further contextualised research at organisational level into the outcomes of MLD, especially in terms of different public service contexts. Practical implications – The paper demonstrates the dangers of designing and implementing development programmes without sufficient regard to professional practice and the realities of managerial discretion in PSOs. Originality/value – The paper provides an in-depth and contextualised insight into the conditions for success and failure in management development interventions in PSOs.

Production of lightweight aggregate from industrial waste and carbon dioxide

The concomitant recycling of waste and carbon dioxide emissions is the subject of developing technology designed to close the industrial process loop and facilitate the bulk-re-use of waste in, for example, construction. The present work discusses a treatment step that employs accelerated carbonation to convert gaseous carbon dioxide into solid calcium carbonate through a reaction with industrial thermal residues. Treatment by accelerated carbonation enabled a synthetic aggregate to be made from thermal residues and waste quarry fines. The aggregates produced had a bulk density below 1000 kg/m3 and a high water absorption capacity. Aggregate crushing strengths were between 30% and 90% stronger than the proprietary lightweight expanded clay aggregate available in the UK. Cast concrete blocks containing the carbonated aggregate achieve compressive strengths of 24 MPa, making them suitable for use with concrete exposed to non-aggressive service environments. The energy intensive firing and sintering processes traditionally required to produce lightweight aggregates can now be augmented by a cold-bonding, low energy method that contributes to the reduction of green house gases to the atmosphere.

Two steps forward, one step back: developing the curriculum for training teachers for technical and further education England 1945-1956

This paper discusses the development of provision for the training of teachers in English further and technical education from 1945 to 1956. While these years saw little growth in this provision, they were formative in that the institutional and curricular patterns of teacher training for the diverse fields of technical and further education were developed at this time. The work of the three national centres in Bolton, London and Huddersfield, during the period of the Emergency Training Scheme (ETS) is summarised with particular reference to the influence of the Ministry of Education‟s conditions for ETS colleges and courses. With the ending of the ETS in 1951 the three centres were given permanent status as teacher training colleges which in turn brought them into association with their local universities as constituent colleges of their Area Training Organisations. The consequences of this transfer to the universities for the curriculum and assessment of technical teacher training and the 'policy dichotomy' of teacher training for secondary and technical education are examined.