External signal-activated liposomal drug delivery systems

Modern drug discovery gives rise to a great number of potential new therapeutic agents, but in some cases the efficient treatment of patient may not be achieved because the delivery of active compounds to the target site is insufficient. Thus, drug delivery is one of the major challenges in current pharmaceutical research. Numerous nanoparticle-based drug carriers, e.g. liposomes, have been developed for enhanced drug delivery and targeting. Drug targeting may enhance the efficiency of the treatment and, importantly, reduce unwanted side effects by decreasing drug distribution to non-target tissues. Liposomes are biocompatible lipid-based carriers that have been studied for drug delivery during the last 40 years. They can be functionalized with targeting ligands and sensing materials for triggered activation. In this study, various external signal-assisted liposomal delivery systems were developed. Signals can be used to modulate drug permeation or release from the liposome formulation, and they provide accurate control of time, place and rate of activation. The study involved three types of signals that were used to trigger drug permeation and release: electricity, heat and light. Electrical stimulus was utilized to enhance the permeation of liposomal DNA across the skin. Liposome/DNA complex-mediated transfections were performed in tight rat epidermal cell model. Various transfection media and current intensities were tested, and transfection efficiency was evaluated non-invasively by monitoring the concentration of secreted reporter protein in cell culture medium. Liposome/DNA complexes produced gene expression, but electrical stimulus did not enhance the transfection efficiency significantly. Heat-sensitive liposomal drug delivery system was developed by coating liposomes with biodegradable and thermosensitive poly(N-(2-hydroxypropyl) methacrylamide-mono/dilactate polymer. Temperature-triggered liposome aggregation and contents release from liposomes were evaluated. The cloud point temperature (CP) of the polymer was set to 42 °C. Polymer-coated liposome aggregation and contents release were observed above CP of the polymer, while non-coated liposomes remained intact. Polymer precipitates above its CP and interacts with liposomal bilayers. It is likely that this induces permeabilization of the liposomal membrane and contents release. Light-sensitivity was introduced to liposomes by incorporation of small (< 5 nm) gold nanoparticles. Hydrophobic and hydrophilic gold nanoparticles were embedded in thermosensitive liposomes, and contents release was investigated upon UV light exposure. UV light-induced lipid phase transitions were examined with small angle X-ray scattering, and light-triggered contents release was shown also in human retinal pigment epithelial cell line. Gold nanoparticles absorb light energy and transfer it into heat, which induces phase transitions in liposomes and triggers the contents release. In conclusion, external signal-activated liposomes offer an advanced platform for numerous applications in drug delivery, particularly in the localized drug delivery. Drug release may be localized to the target site with triggering stimulus that results in better therapeutic response and less adverse effects. Triggering signal and mechanism of activation can be selected according to a specific application.

Thin-Layer Chromatography with Ultraviolet and Mass Spectrometric Detection: From Preparative-Layer to Miniaturized Ultra-Thin-Layer Technique

The present challenge in drug discovery is to synthesize new compounds efficiently in minimal time. The trend is towards carefully designed and well-characterized compound libraries because fast and effective synthesis methods easily produce thousands of new compounds. The need for rapid and reliable analysis methods is increased at the same time. Quality assessment, including the identification and purity tests, is highly important since false (negative or positive) results, for instance in tests of biological activity or determination of early-ADME parameters in vitro (the pharmacokinetic study of drug absorption, distribution, metabolism, and excretion), must be avoided. This thesis summarizes the principles of classical planar chromatographic separation combined with ultraviolet (UV) and mass spectrometric (MS) detection, and introduces powerful, rapid, easy, low-cost, and alternative tools and techniques for qualitative and quantitative analysis of small drug or drug-like molecules. High performance thin-layer chromatography (HPTLC) was introduced and evaluated for fast semi-quantitative assessment of the purity of synthesis target compounds. HPTLC methods were compared with the liquid chromatography (LC) methods. Electrospray ionization mass spectrometry (ESI MS) and atmospheric pressure matrix-assisted laser desorption/ionization MS (AP MALDI MS) were used to identify and confirm the product zones on the plate. AP MALDI MS was rapid, and easy to carry out directly on the plate without scraping. The PLC method was used to isolate target compounds from crude synthesized products and purify them for bioactivity and preliminary ADME tests. Ultra-thin-layer chromatography (UTLC) with AP MALDI MS and desorption electrospray ionization mass spectrometry (DESI MS) was introduced and studied for the first time. Because of the thinner adsorbent layer, the monolithic UTLC plate provided 10 100 times better sensitivity in MALDI analysis than did HPTLC plates. The limits of detection (LODs) down to low picomole range were demonstrated for UTLC AP MALDI and UTLC DESI MS. In a comparison of AP and vacuum MALDI MS detection for UTLC plates, desorption from the irregular surface of the plates with the combination of an external AP MALDI ion source and an ion trap instrument provided clearly less variation in mass accuracy than the vacuum MALDI time-of-flight (TOF) instrument. The performance of the two-dimensional (2D) UTLC separation with AP MALDI MS method was studied for the first time. The influence of the urine matrix on the separation and the repeatability was evaluated with benzodiazepines as model substances in human urine. The applicability of 2D UTLC AP MALDI MS was demonstrated in the detection of metabolites in an authentic urine sample.

Community Pharmacies and the Needs of Mobile EU Citizens - A study on Finns living in Spain

Migration within the European Union (EU) has increased since the Union was established. Community pharmacies provide open access to health care services and can be the first, most frequently used or even the only contact with a nation s health care system among mobile community residents. In some of the mass-migration areas in Southern Europe, most of the customers may represent mobile citizens of foreign background. This has not always been taken into consideration in the development of community pharmacy services. Mobile patients have been on the EU's health policy agenda, but they have seldom been mentioned in the context of community pharmacies. In most of the EU member states, governments control the specific legislation concerning community pharmacies and there is no harmonised pharmaceutical policy or consistent minimal standards for community pharmacy services in the EU. The aim of this study was to understand medication use, the role of community pharmacies and the symptom mitigation process of mobile community residents. Finns living in Spain were used as an example to examine how community pharmacies in a EU member state meet the needs of mobile community residents. The data were collected by a survey in 2002 (response rate 53%, n= 533) and by five focus group discussions in 2006 (n=30). A large number (70%) of the respondents had moved to Spain for health reasons and suffered from chronic morbidity. Community pharmacies had an important role in the healthcare of mobile community residents and the respondents were mostly satisfied with these services. However, several medication safety risks related to community pharmacy practices were identified: 1) Availability of prescription medicines without prescription (e.g., antibiotics, sleeping pills, Viagra®, asthma medications, cardiovascular medicines, psoriasis medicines and analgesics); 2) Irrational use of medicines (e.g., 41% of antibiotic users had bought their antibiotics without a prescription, and the most common reasons for antibiotic self-medication were symptomatic common colds and sore throats); 3) Language barriers between patients and pharmacy professionals; 4) Lack of medication counselling; 5) Unqualified pharmacy personnel providing pharmacotherapy. A fifth of the respondents reported experiencing problems during pharmacy visits in Spain, and the lack of a common language was the source of most of these problems. The findings of this study indicate that regulations and their enforcement can play a crucial role in actually assuring the rational and safe use of medicines. These results can be used in the development of pharmaceutical and healthcare policies in the EU. It is important to define consistent minimum standards for community pharmacy services in the EU. Then, the increasing number of mobile community residents could access safe and high quality health care services, including community pharmacy services, in every member state within the EU.

Characterisation and processing of amorphous binary mixtures with low glass transition temperature

The number of drug substances in formulation development in the pharmaceutical industry is increasing. Some of these are amorphous drugs and have glass transition below ambient temperature, and thus they are usually difficult to formulate and handle. One reason for this is the reduced viscosity, related to the stickiness of the drug, that makes them complicated to handle in unit operations. Thus, the aim in this thesis was to develop a new processing method for a sticky amorphous model material. Furthermore, model materials were characterised before and after formulation, using several characterisation methods, to understand more precisely the prerequisites for physical stability of amorphous state against crystallisation. The model materials used were monoclinic paracetamol and citric acid anhydrate. Amorphous materials were prepared by melt quenching or by ethanol evaporation methods. The melt blends were found to have slightly higher viscosity than the ethanol evaporated materials. However, melt produced materials crystallised more easily upon consecutive shearing than ethanol evaporated materials. The only material that did not crystallise during shearing was a 50/50 (w/w, %) blend regardless of the preparation method and it was physically stable at least two years in dry conditions. Shearing at varying temperatures was established to measure the physical stability of amorphous materials in processing and storage conditions. The actual physical stability of the blends was better than the pure amorphous materials at ambient temperature. Molecular mobility was not related to the physical stability of the amorphous blends, observed as crystallisation. Molecular mobility of the 50/50 blend derived from a spectral linewidth as a function of temperature using solid state NMR correlated better with the molecular mobility derived from a rheometer than that of differential scanning calorimetry data. Based on the results obtained, the effect of molecular interactions, thermodynamic driving force and miscibility of the blends are discussed as the key factors to stabilise the blends. The stickiness was found to be affected glass transition and viscosity. Ultrasound extrusion and cutting were successfully tested to increase the processability of sticky material. Furthermore, it was found to be possible to process the physically stable 50/50 blend in a supercooled liquid state instead of a glassy state. The method was not found to accelerate the crystallisation. This may open up new possibilities to process amorphous materials that are otherwise impossible to manufacture into solid dosage forms.

The Effects of Nicotine on the Regulation of Neuronal Alpha7 Nicotinic Acetylcholine Receptors and Intracellular Signalling Pathways

Nicotine, the addictive compound of tobacco products, exerts its effects in the brain by binding to neuronal acetylcholine nicotinic receptors (nAChRs). The aim of the present study was to increase the knowledge of nicotine s complex effects, the focus being on homomeric alpha7-nAChRs that are widely expressed in the brain. Nicotinic regulation of differential signalling molecules including transcriptional regulators was also studied. We found that the number of alpha7-nAChRs is increased in specific brain regions in mice, in a time-dependent manner after chronic oral nicotine administration. Our results suggest that in addition to alpha4beta2-nAChRs, the other major nAChR subtype expressed in the brain, the number of alpha7-nAChRs is affected by chronic presence of nicotine. We suggest that when studying the long-term effects of nicotine, the duration on administration is of great importance. Next, we observed that nicotine exposure induces accumulation of cAMP in cell cultures expressing nAChRs. Furthermore, nicotine-induced alpha7-nAChR upregulation was potentiated by treatments enhancing cAMP-signalling, suggesting a role for cAMP in the upregulation process. Protein kinase C (PKC) was found essential for the basal regulation of alpha7-nAChR number. The nicotine-evoked alpha7-nAChR upregulation could be further increased by PKC overexpression. Thirdly, the effects of nicotine on dopamine and cAMP regulated phosphoprotein (DARPP-32) were characterised in rat brain. The results show that DARPP-32 is regulated by both acute and long-term nicotine treatment in the striatal subdivisions. The effect of acute nicotine is dose-dependent and the three striatal regions display differential sensitivities to nicotine. Chronic nicotine is also able to regulate DARPP-32 signalling with prominent effect seen in the nucleus accumbens (NAc), suggesting a role for DARPP-32 in the mediation of long-term effects of nicotine. Finally, the regulation of transcription factors Elk-1 and FosB/deltaFosB by nicotine was investigated. We found that Elk-1 is activated by acute nicotine selectively in the NAc core and hippocampal area CA1, whereas acute nicotine does not affect FosB/deltaFosB. Long-term intermittent or continuous nicotine increases the level of total Elk-1 in the same brain regions as acute nicotine. FosB/deltaFosB is also affected by chronic nicotine. Thus, similarly to other drugs of abuse, nicotine regulates transcriptional regulators Elk-1 and FosB/deltaFosB. These results bring further support for a common mechanism underlying the development of addiction. Nicotine s positive effects on learning and memory might involve the transcription factor Elk-1 based on the changes seen in the hippocampus, the key area in cognitive functions.

Stereochemical and steric control of enzymatic glucuronidation : A rational approach for the design of novel Inhibitors for the human UDP-glucuronosyltransferase 2B7

The UDP-glucuronosyltransferases (UGTs) are enzymes of the phase II metabolic system. These enzymes catalyze the transfer of α-D-glucuronic acid from UDP-glucuronic acid to aglycones bearing nucleophilic groups affording exclusively their corresponding β-D-glucuronides to render lipophilic endobiotics and xenobiotics more water soluble. This detoxification pathway aids in the urinary and biliary excretion of lipophilic compounds thus preventing their accumulation to harmful levels. The aim of this study was to investigate the effect of stereochemical and steric features of substrates on the glucuronidation catalyzed by UGTs 2B7 and 2B17. Furthermore, this study relates to the design and synthesis of novel, selective inhibitors that display high affinity for the key enzyme involved in drug glucuronidation, UGT2B7. The starting point for the development of inhibitors was to assess the influence of the stereochemistry of substrates on the UGT-catalyzed glucuronidation reaction. A set of 28 enantiomerically pure alcohols was subjected to glucuronidation assays employing the human UGT isoforms 2B7 and 2B17. Both UGT enzymes displayed high stereoselectivity, favoring the glucuronidation of the (R)-enantiomers over their respective mirror-image compounds. The spatial arrangement of the hydroxy group of the substrate determined the rate of the UGT-catalyzed reaction. However, the affinity of the enantiomeric substrates to the enzymes was not significantly influenced by the spatial orientation of the nucleophilic hydroxy group. Based on these results, a rational approach for the design of inhibitors was developed by addressing the stereochemical features of substrate molecules. Further studies showed that the rate of the enzymatic glucuronidation of substrates was also highly dependent on the steric demand in vicinity of the nucleophilic hydroxy group. These findings provided a rational approach to turn high-affinity substrates into true UGT inhibitors by addressing stereochemical and steric features of substrate molecules. The tricyclic sesquiterpenols longifolol and isolongifolol were identified as high-affinity substrates which displayed high selectivity for the UGT isoform 2B7. These compounds served therefore as lead structures for the design of potent and selective inhibitors for UGT2B7. Selective and potent inhibitors were prepared by synthetically modifying the lead compounds longifolol and isolongifolol taking stereochemical and steric features into account. The best inhibitor of UGT2B7, β-phenyllongifolol, displayed an inhibition constant of 0.91 nM.

Towards real-time understanding of processes in pharmaceutical powder technology

There is a need for better understanding of the processes and new ideas to develop traditional pharmaceutical powder manufacturing procedures. Process analytical technology (PAT) has been developed to improve understanding of the processes and establish methods to monitor and control processes. The interest is in maintaining and even improving the whole manufacturing process and the final products at real-time. Process understanding can be a foundation for innovation and continuous improvement in pharmaceutical development and manufacturing. New methods are craved for to increase the quality and safety of the final products faster and more efficiently than ever before. The real-time process monitoring demands tools, which enable fast and noninvasive measurements with sufficient accuracy. Traditional quality control methods have been laborious and time consuming and they are performed off line i.e. the analysis has been removed from process area. Vibrational spectroscopic methods are responding this challenge and their utilisation have increased a lot during the past few years. In addition, other methods such as colour analysis can be utilised in noninvasive real-time process monitoring. In this study three pharmaceutical processes were investigated: drying, mixing and tabletting. In addition tablet properties were evaluated. Real-time monitoring was performed with NIR and Raman spectroscopies, colour analysis, particle size analysis and compression data during tabletting was evaluated using mathematical modelling. These methods were suitable for real-time monitoring of pharmaceutical unit operations and increase the knowledge of the critical parameters in the processes and the phenomena occurring during operations. They can improve our process understanding and therefore, finally, enhance the quality of final products.

Investigating physical properties of solid dosage forms during pharmaceutical processing : Process analytical applications of vibrational spectroscopy

In order to improve and continuously develop the quality of pharmaceutical products, the process analytical technology (PAT) framework has been adopted by the US Food and Drug Administration. One of the aims of PAT is to identify critical process parameters and their effect on the quality of the final product. Real time analysis of the process data enables better control of the processes to obtain a high quality product. The main purpose of this work was to monitor crucial pharmaceutical unit operations (from blending to coating) and to examine the effect of processing on solid-state transformations and physical properties. The tools used were near-infrared (NIR) and Raman spectroscopy combined with multivariate data analysis, as well as X-ray powder diffraction (XRPD) and terahertz pulsed imaging (TPI). To detect process-induced transformations in active pharmaceutical ingredients (APIs), samples were taken after blending, granulation, extrusion, spheronisation, and drying. These samples were monitored by XRPD, Raman, and NIR spectroscopy showing hydrate formation in the case of theophylline and nitrofurantoin. For erythromycin dihydrate formation of the isomorphic dehydrate was critical. Thus, the main focus was on the drying process. NIR spectroscopy was applied in-line during a fluid-bed drying process. Multivariate data analysis (principal component analysis) enabled detection of the dehydrate formation at temperatures above 45°C. Furthermore, a small-scale rotating plate device was tested to provide an insight into film coating. The process was monitored using NIR spectroscopy. A calibration model, using partial least squares regression, was set up and applied to data obtained by in-line NIR measurements of a coating drum process. The predicted coating thickness agreed with the measured coating thickness. For investigating the quality of film coatings TPI was used to create a 3-D image of a coated tablet. With this technique it was possible to determine coating layer thickness, distribution, reproducibility, and uniformity. In addition, it was possible to localise defects of either the coating or the tablet. It can be concluded from this work that the applied techniques increased the understanding of physico-chemical properties of drugs and drug products during and after processing. They additionally provided useful information to improve and verify the quality of pharmaceutical dosage forms

Pre-operative nutritional support in children with end-stage liver disease accepted for liver transplantation: An approach to management

Pre-operative nutritional support was studied in 28 children with end-stage liver disease awaiting orthotopic liver transplantation. Nasogastric supplemental administration of a standard semi-elemental enteral nutritional formula was compared with a similar formula enriched with branched chain amino acids, and with a group receiving oral nutrition only. The duration of treatment in all groups was similar (mean 90 days). Energy intakes in the supplemented groups were 120-150% of recommended daily intakes (RDI), whereas ad libitum intakes in the oral group ranged 58-100% RDI. A significant improvement in mean Z-score for body weight (denoting catch-up) was noted only in those children who received nasogastric supplements enriched with branched-chain amino acids. The standard enterally-fed group maintained their body weight and Z-scores did not change significantly. In contrast, body weight Z-scores in those fed orally declined significantly. Nutritional supportive therapy of malnourished children with end-stage liver disease can minimize or improve nutritional status in children awaiting liver transplantation. The use of nutritional formulae rich in branche-chain amino acids may have nutritional advantages in children with chronic liver disease which require further study and evaluation.

Kuluttaminen ja ylhäisaatelin elämäntapa 1700-luvun Ruotsissa

Consumption and the lifestyle of the high nobility in eighteenth-century Sweden This monograph is an analysis of the lifestyle, consumption and private finances of the Swedish high nobility during the eighteenth century (ca 1730 1795). It describes the lifestyle of one noble house, the House of Fersen. The Fersen family represents the leading political, economic and cultural elite in eighteenth-century Sweden. The analysis concentrates on Count Carl von Fersen (1716 1786) and his brother Count Axel von Fersen (1719 1794), their spouses and children. Carl von Fersen was a courtier whilst Axel von Fersen was an officer and one of the leaders of the Francophile Hat party. His son, Axel von Fersen the younger, was in his time an officer and a favourite of Gustavus III, King of Sweden, as well as a favourite and trusted confidant of Marie-Antoinette, Queen of France. The research is based upon the Fersen family s private archives, the Counts personal account books, probate inventories, letters and diaries. The study discusses the Fersens landed property and investments in ironworks and manufacturing, the indebtedness of the high nobility, high offices in civil administration, the militia and at court, as well as marriages as the foundations of noble wealth and power. It analyses the Count von Fersens revenue and expenditure, their career options and personal expenses, their involvement in the building and decorating of palaces, and the servants in service of the Fersen family as well as the ideal nobleman and his consumption. Central themes are inheritance, children s education, marriages and ladies preparing their trousseaux, the nobility ordering luxury goods from France, the consumption of Counts and Countesses before and after marrying and having children, the pleasures of a noble life as well as the criticism of luxury and sumptuousness. The study contributes to the large body of research on consumption and nobility in the eighteenth century by connecting the lifestyle, consumption and private finances of the Swedish high nobility to their European context. Key words: nobility, Fersen, lifestyle, consumption, private finances, Sweden, eighteenth century

History, Transfer, Politics : Five studies on the legacy of Uppsala philosophy

The Uppsala school of Axel Hägerström can be said to have been the last genuinely Swedish philosophical movement. On the other hand, the Swedish analytic tradition is often said to have its roots in Hägerström s thought. This work examines the transformation from Uppsala philosophy to analytic philosophy from an actor-based historical perspective. The aim is to describe how a group of younger scholars (Ingemar Hedenius, Konrad Marc-Wogau, Anders Wedberg, Alf Ross, Herbert Tingsten, Gunnar Myrdal) colonised the legacy of Hägerström and Uppsala philosophy, and faced the challenges they met in trying to reconcile this legacy with the changing philosophical and political currents of the 1930s and 40s. Following Quentin Skinner, the texts are analysed as moves or speech acts in a particular historical context. The thesis consists of five previously published case studies and an introduction. The first study describes how the image of Hägerström as the father of the Swedish analytic tradition was created by a particular faction of younger Uppsala philosophers who (re-) presented the Hägerströmian philosophy as a parallel movement to logical empiricism. The second study examines the confrontations between Uppsala philosophy and logical empiricism in both the editorial board and in the pages of Sweden s leading philosophical journal Theoria. The third study focuses on how the younger generation redescribed Hägerströmian legal philosophical ideas (Scandinavian Legal Realism), while the fourth study discusses how they responded to the accusations of a connection between Hägerström s value nihilistic theory and totalitarianism. Finally, the fifth study examines how the Swedish social scientist and Social Democratic intellectual Gunnar Myrdal tried to reconcile value nihilism with a strong political programme for social reform. The contribution of this thesis to the field consists mainly in a re-evaluation of the role of Uppsala philosophy in the history of Swedish philosophy. From this perspective the Uppsala School was less a collection of certain definite philosophical ideas than an intellectual legacy that was the subject of fierce struggles. Its theories and ideas were redescribed in various ways by individual actors with different philosophical and political intentions.

Kognitiva system i namngivningen av finländska handelsfartyg 1838-1938

This dissertation is an onomastic study of Finland s stock of ship names (nautonomasticon) recorded over the period 1838 1938. The primary material investigated consists of 2 066 examples of ship names from the fleets of coastal towns, distributed over five sample years. The material is supplemented with two bodies of comparative data; one that consists of 2 535 examples of boat names from the archipelago area at the corresponding time, and another that comprises 482 examples of eighteenth century Finnish ship names. This study clarifies the categories of names that appear the frequency of the names, formation, morphology, linguistic origin, functions, and semantic qualities. By comparing the material with boat names from previous centuries, and from other countries, the characteristics of Finnish vessel names are further highlighted. Additional clarification is brought to the chronological, regional, and social variations, and to the emergence of various forms of systematic naming. This dissertation builds on older research from other countries, and uses traditional onomastic methods alongside a more modern methodology. The approach is interdisciplinary, meaning that the names are explored using facts not only from nautical history, but also from a range of other historical disciplines such as economics, culture, art, and literature. In addition, the approach is socio-onomastic, i.e. that the variations in names are studied in a societal context. Using a synchronised perspective, cognitive linguistic theories have provided the tools for this exploration into the metaphorical and the prototypical meaning of the names, and the semantic domains that the names create. The quantitative analysis has revealed the overall picture of Finnish boat names. Personal names, names from mythology, and place names, emerge as significant categories, alongside nonproprial names in Swedish and Finnish. The interdisciplinary perspective has made it possible to explain certain trends in the stock of boat names, for example, the predisposition towards names from classical mythology, the breakthrough of names taken from the national epos Kalevala, names in the Finnish language from around the middle of the nineteenth century, and the continuing rise of place names during the latter part of the period 1838 1938. The socio-onomastic perspective has also identified clear differences between those ship names used in towns, and those ship names used in the archipelago, and it has clarified how naming conventions tend to spread from town centres to peripheral areas. The cognitive linguistic methods have revealed that the greater part of the vessel names can be interpreted as metaphors, in particular personifications, and that many names are related in their content and also form semantic networks and cognitive systems. The results indicate that there is a mental nautonomasticon that consists of a standard set of traditional ship names, but they also reveal the existence of conscious or unconscious cognitive systems (rules and conventions) that guide the naming of boats.

Anpassning i språkkontakt : Morfologisk och ortografisk anpassning av engelska lånord i svenskan

The study investigates the formal integration of English loanwords into the Swedish language system. The aim has been to analyse and describe the morphological/morphosyntactic and the orthographical integration of the loanwords. I have studied how the foreign language elements get accommodated to Swedish and which factors are relevant in the integration. The material for the study consists of Swedish newspapers published in Sweden and Finland in paper format (with a focus on the years 1975 and 2000) and newspapers in digital format on the net. The theoretical frame for the study is contact linguistics. The study is based on a sociolinguistic, structural and language political perspective on what language is, and what language contact is. The method used is usage-based linguistic analysis. In the morphological study of the loanwords, I have made both a quantitative and a qualitative study. I have analysed the extent to which loanwords show some indication of integration in Swedish, and to what extent they show no signs of integration at all. I have also analysed integration in relation to word classes i.e., how nouns, adjectives and verbs integrate and which factors are relevant for the result of the integration. The result shows that most loanwords (36 %) do not show any signs of being formally integrated in Swedish. They undergo neither inflectional, nor derivational changes. One fifth of the loanwords are inflected according to the rules of Swedish grammar. Nouns are generally more often than verbs placed in positions in the sentence where no formal adaption is needed. Almost all of the verbs in the material are inflected according to Swedish rules of grammar. Only 3 % of the loanwords are inflected according to English rules or are placed in an ungrammatical position in the sentence. The orthographical study shows that English loanwords very seldom get adapted to Swedish orthography. Some English vowel and consonant graphemes are replaced with Swedish ones, for example a, ay and ai are replaced with aj or ej (mail → mejl). The study also indicates that morphological integration is related to orthographical integration: loanwords that are inflected according to Swedish grammar are more likely to be orthographical integrated than loanwords that are inflected according to English grammar. The results also shows that the integration of loanwords are affected by mostly language structural factors and language political factors.

Lagöversättning som process och produkt : Revideringar och institutioner vid lagöversättning till svenska i Finland

The thesis studies the translation process for the laws of Finland as they are translated from Finnish into Swedish. The focus is on revision practices, norms and workplace procedures. The translation process studied covers three institutions and four revisions. In three separate studies the translation process is analyzed from the perspective of the translations, the institutions and the actors. The general theoretical framework is Descriptive Translation Studies. For the analysis of revisions made in versions of the Swedish translation of Finnish laws, a model is developed covering five grammatical categories (textual revisions, syntactic revisions, lexical revisions, morphological revisions and content revisions) and four norms (legal adequacy, correct translation, correct language and readability). A separate questionnaire-based study was carried out with translators and revisers at the three institutions. The results show that the number of revisions does not decrease during the translation process, and no division of labour can be seen at the different stages. This is somewhat surprising if the revision process is regarded as one of quality control. Instead, all revisers make revisions on every level of the text. Further, the revisions do not necessarily imply errors in the translations but are often the result of revisers following different norms for legal translation. The informal structure of the institutions and its impact on communication, visibility and workplace practices was studied from the perspective of organization theory. The results show weaknesses in the communicative situation, which affect the co-operation both between institutions and individuals. Individual attitudes towards norms and their relative authority also vary, in the sense that revisers largely prioritize legal adequacy whereas translators give linguistic norms a higher value. Further, multi-professional teamwork in the institutions studied shows a kind of teamwork based on individuals and institutions doing specific tasks with only little contact with others. This shows that the established definitions of teamwork, with people co-working in close contact with each other, cannot directly be applied to the workplace procedures in the translation process studied. Three new concepts are introduced: flerstegsrevidering (multi-stage revision), revideringskedja (revision chain) and normsyn (norm attitude). The study seeks to make a contribution to our knowledge of legal translation, translation processes, institutional translation, revision practices and translation norms for legal translation. Keywords: legal translation, translation of laws, institutional translation, revision, revision practices, norms, teamwork, organizational informal structure, translation process, translation sociology, multilingual.

Konstruktioner och valens : Verbfraser med åt i ett jämförande perspektiv

Det har knappast undgått någon som är språkligt medveten att finlandssvenskan och sverigesvenskan skiljer sig åt till vissa delar. Olikheterna återfinns på olika språkliga nivåer. Mest kända och omskrivna är de lexikologiska skillnaderna, dvs. skillnaderna på ordplanet. Betydligt mindre uppmärksamhet har ägnats syntaktiska skillnader, dvs. skillnader i hur satser och meningar byggs upp. För att öka kunskapen om finlandssvensk syntax initierade Språkvetenskapliga nämnden vid Svenska litteratursällskapet i Finland projektet Svenskan i Finland – syntaktiska drag i ett jämförande perspektiv, som pågick åren 2004–2006. Min avhandling har kommit till inom ramen för det projektet. Prepositionerna (t.ex. av, i, på, för, till, åt osv.) är så kallade funktionsord som har till uppgift att binda samman de mer betydelsetunga orden till satser och meningar. Den finlandssvenska prepositionsanvändningen skiljer sig i viss mån från den sverigesvenska, och ”åt” är en av de prepositioner som ofta lyfts fram som exempel. Finlandssvenskarna säger t.ex. ”han gav en bok åt Lena” i stället för ”han gav en bok till Lena” eller ”han gav Lena en bok”. De säger ”berätta något åt någon” (i stället för ”för”) och de säger ”ringa åt någon” i stället för ”ringa någon”. Ett huvudsyfte med min undersökning är att ta reda på hur pass stora skillnaderna är om man ser till samtliga belägg på ”åt” i ett material och inte bara till sådana som man fäster sig vid för att man vet att de avviker i finlandssvenskan. Undersökningen är korpusbaserad. Det betyder att jag letat efter alla belägg på kombinationer av verb och prepositionen ”åt” i rätt stora textmassor som finns tillgängliga i elektronisk form. Materialet ligger i Språkbanken i Finland och omfattar huvudsakligen tidningstext och skönlitteratur. Jag har använt mig av en textmassa på sammanlagt ungefär 40 miljoner löpande ord, drygt 23 miljoner finlandssvenska och drygt 19 miljoner sverigesvenska. Det materialet gav ca 20 000 åt-belägg att studera, och det visade sig något oväntat att ”åt” inte alls är vanligare i finlandssvenskan än i sverigesvenskan när det gäller skriftspråk, åtminstone inte i professionella skribenters språk. Om man kompenserar för att den finlandssvenska och den sverigesvenska korpusen inte är helt lika i fråga om genrefördelning och ålder, kommer man fram till i stort sett samma frekvens för ”åt” i båda korpusarna. För den närmare analysen av vilka mönster åt-beläggen uppvisar har jag först och främst utnyttjat konstruktionsgrammatik men också ramsemantik och valensteori. Konstruktionsgrammatiken är ingen enhetlig teori, men tanken om grammatiska konstruktioner är gemensam. Konstruktioner representerar allt från generella syntaktiska mönster till specifika mönster för språkliga enskildheter. Uppfattningen om vad som ska inbegripas i begreppet varierar, men definitionen av ”konstruktion” som ”par (eller konstellationer) av form och betydelse” är gemensam. ”Konstruktion” avser aldrig konkreta belägg i texter eller yttranden utan alltid det abstrakta mönstret bakom dessa. Och varje yttrande är resultatet av att en stor mängd konstruktioner samverkar. I min analys har jag utgått ifrån att beläggen med ”åt” kan återföras på olika konstruktioner eller mönster utifrån vad som är gemensamt för grupper av belägg. Jag har sett på vad åt-frasen i samverkan med verbet har för funktion i beläggen. En åt-fras är syntaktiskt en prepositionsfras och består av en preposition och en rektion. Exempelvis utgör ordparet ”åt skogen” en prepositionsfras där ”skogen” är rektion. Ur mitt material har jag kunnat abstrahera fram fem övergripande mönster där referenten för rektionen har olika så kallade semantiska roller. Åt-frasen kan i kombination med verbet ange mål eller riktmärke, som i t.ex. svänga åt höger, dra åt helvete, ta sig åt hjärtat, luta åt en seger för IFK. Den kan för det andra ange mottagare (t.ex. ge varsin kaka åt hundarna, bygga en bastu åt sina svärföräldrar, skaffa biljetter åt en kompis). För det tredje kan åt-frasen avse en referent som har nytta (eller skada) av en aktion (t.ex. klippa häcken åt grannen, ställa in digitalboxen åt sin moster). Åt-frasen kan slutligen avse den eller det som är föremål antingen för en kommunikationsaktion (vinka åt sin son, skratta åt eländet) eller en attityd eller känsla (glädja sig åt framgången). Utöver dessa huvudmönster finns det ett antal smärre grupper av belägg som bildar egna mönster, men de utgör sammanlagt under 3 % i bägge korpusarna. Inom grupperna kan undermönster urskiljas. I t.ex. mottagargruppen representerar ”ge varsin kaka åt hundarna” överföringskonstruktion, ”bygga en bastu åt sina svärföräldrar” produktionskonstruktion och ”skaffa biljetter åt en kompis” ombesörjningskonstruktion. Alla typer är gemensamma för bägge materialen, men andelen belägg som representerar de olika typerna skiljer sig betydligt. I det sverigesvenska materialet står t.ex. det mönster där åt-frasen avser mål eller riktmärke för en mycket större andel av beläggen än i finlandssvenskan. Också andelen belägg där åt-frasen avser någon som har nytta (eller skada) av en aktion är mycket högre i det sverigesvenska materialet. I det finlandssvenska materialet står i gengäld mottagarbeläggen för över 50 % av beläggen medan andelen i det sverigesvenska materialet är bara 30 %. Inom gruppen utgör belägg av produktions- och ombesörjningstyp dessutom en mindre andel i det finlandssvenska materialet än i det sverigesvenska. Dessa står till sin funktion nära den typ som avser den som har nytta av aktionen. De konkreta beläggen på överföring (ge varsin kaka åt hundarna) utgör en större andel i det finlandssvenska materialet än i det sverigesvenska (ca 8 % mot 3 %), men typiskt för båda materialen är hög kollokationsgrad (”kollokation” avser par eller grupper av ord som uppträder oftare tillsammans än de statiskt sett skulle göra vid helt slumpmässig förekomst). Största delen av mottagarbeläggen utgörs av fraser av typen ”ge arbete åt någon, ge eftertryck åt något, ge liv åt något; ägna tid åt något, ägna sitt liv åt något, ägna uppmärksamhet åt något”. De här slutsatserna gäller alltså skriftspråk. I talspråk ser fördelningen annorlunda ut. Typiskt för prepositionen ”åt” är överhuvudtaget hög kollokationsgrad. Det förefaller som om språkanvändarna har tydliga, färdiga mallar för var ”åt” kan komma in. Det enda mönster som verkar helt produktivt, i den meningen att elementen är i stort sett fritt kombinerbara, är kombinationer av verb och åt-fras där åt-frasen avser den som har nytta av något. Att någon utför något för någons räkning verkar överlag kunna uttryckas med prepositionen ”åt”: t.ex. ”tvätta bilen åt pappa, ringa efter en taxi åt kunden”. Till och med belägg av typen ”hon drömde åt honom att bli ordinarie adjunkt” förekommer i någon mån. Konstruktionen är produktiv i båda språkvarieteterna men uppenbart är att konstruktion med mottagare har tolkningsföreträde i vissa fall i finlandssvenskan: ”Filip skrev ett brev åt sin syster” tolkas av sverigesvenskar som att Filip skrev brevet för systerns räkning, medan finlandssvenskar överlag uppenbarligen tolkar det som att Filip skrev till sin syster, att systern var mottagare av brevet. Ungefär 20 % av alla belägg i båda materialen representerar fall där ”åt” utgör partikel. Verb och ”åt” är närmare förbundna med varandra än när ”åt” utgör normal preposition. Exempel på partikelbelägg är ”han kom inte åt strömbrytaren, det gick åt mängder med saft, landet får dra åt svångremmen, de roffade åt sig de bästa platserna”. Också partikelmaterialet ser på ett generellt plan väldigt lika ut i båda språkvarieteterna. Den största skillnaden uppvisar den reflexiva typen ”roffa åt sig”. Medan typen är mycket homogen i det sverigesvenska materialet är variationen större i det finlandsvenska. Dels uppträder fler verb i kombinationen (han köpte åt sig ett par jeans), dels vacklar ordföljden (han nappade åt sig ett paraply ~ han nappade ett paraply åt sig). Att ”åt” används mer i vissa funktioner i finlandsvenskan brukar förklaras med påverkan från finskans allativ (ändelsen -lle: hän antoi kirjan Astalle > hon gav en bok åt Asta). Allt tyder dock på att den finlandssvenska åt-användningen delvis är en relikt. I äldre sverigesvenska källor träffar man på ”åt” i sådana kontexter som numera är typiska för finlandsvenskan. Det finlandssvenska språkområdet ligger ute i periferin i relation till det språkliga centrum som förändringar sprider sig från (för svenskans del främst Stockholmstrakten) och typiskt för perifera områden är att de uppvisar ålderdomliga drag också när inga kontaktfenomen spelar in. Allativen kan naturligtvis ha bidragit till att bevara användningen av ”åt” i finlandssvenskan. Att det är just ”åt” som används” beror antagligen på att prepositionen har flest funktioner gemensamt med allativen rent kognitivt om man jämför med de betydligt mer frekventa prepositionerna ”till” och ”för”. Uppenbart är också att åt-användningen därtill lever sitt eget liv i finlandssvenskan. I vissa varieteter av finlandssvenska kan man t.ex. höra yttranden av typ ”alla fiskarna dog åt dom”. Som språklig enskildhet har det ingen finsk förebild med allativ. Yttrandet är ett exempel på töjning av en svensk konstruktion. Modell finns dels i det mönster där åt avser den som har nytta eller skada av något, dels i relationell användning av ”åt”: han är hantlangare åt Eriksson ~ han är Erikssons hantlangare. Vid språkkontakt är det överlag konstruktioner som har förebild i det låntagande språket som lånas in från det långivande språket, medan konstruktioner som saknar förebild är betydligt mindre benägna att vinna insteg.