Chelating behavior of acylhydrazones towards transition metals:Spectral and structural aspects

The current work deals with the synthesis and characterization of metal complexes derived from some substituted acylhydrazones. The hydrazones under investigation were characterized by IR, UV, NMR spectral studies and the molecular structure of one of the hydrazones was solved by single crystal XRD studies. In the present work dioxovanadium(V), manganese(II), cobalt(II/III), nickel(II), copper(II), zinc(II) and cadmium(II) complexes were synthesized and characterized by various spectroscopic techniques, molar conductance measurements, magnetic susceptibility measurements and cyclic voltammetry. Single crystals of some of the complexes were isolated and characterized by single crystal X-ray diffraction.The thesis is divided into eight chapters. Chapter 1 gives an introduction on hydrazones, diversity in their chelating behavior and their application in various fields. This chapter also describes different analytical techniques employed for the characterization of hydrazones and their metal complexes. Chapter 2 includes the synthesis and characterization of two substituted acylhydrazones. This chapter also discusses how the coordination behavior of hydrazones under investigation is interesting. Chapters 3-8 discuss the synthesis and characterization of some transition metal complexes derived from the acylhydrazones under study.The hydrazones synthesized were found to exist in the amido form. Various characterization techniques were carried out to explore the structure of the synthesized complexes. The results indicate that both the hydrazones coordinate through the pyridyl and azomethine nitrogens and amide oxygen either in enolate or neutral form. Out of synthesized complexes V(V), Zn/Cd(II) and one of the cobalt complex was found to diamagnetic. We could isolate single crystals of some of the complexes and most of the complexes crystallized were found to have a distorted octahedral geometry. Thus X-ray crystallographic study which was used as major tool in the structure determination revealed that the hydrazones undergo a rotation about the azomethine bond on complexation. We hope the work presented in the thesis would be helpful for those who are working in the field of metal complexes and can further they can be utilized for various applications.

Spectral studies of naphthalocyanine (Nc) and rare earth phthalocyanine (RePc) molecules in an inorganic glassy borate matrix

Optical absorption and emission spectral studies of free and metal naphthalocyanine doped borate glass matrix are reported for the first time. Absorption spectra recorded in the UV- VIS-NIR region show the characteristic absorption bands, namely, the B-band and Q-band of the naphthalocyanine (Nc) molecule. Some of the important spectral parameters, namely, the optical absorption coefficient (α), molar extinction coefficient (ε) and absorption cross section (σa) of the principal absorption transitions are determined. Optical band gap (Eg) of the materials evaluated from the functional dependence of absorption coefficient on photon energy lies in the range 1.6 eV≤Eg≤2.1 eV. All fluorescence spectra except that of EuNc consist of an intense band in the 765 nm region corresponding to the excitation of Q-band. In EuNc the maximum fluorescence intensity band is observed at 824 nm. The intensity of the principal fluorescence band is maximum in ZnNc, whereas it is minimum in H2Nc. Radiative parameters of the principal fluorescence transitions corresponding to the Q-band excitation are also reported for the naphthalocyanine and phthalocyanine based matrices.

Optical absorption studies of free (H2Pc) and rare earth (RePc) phthalocyanine doped borate glasses

Optical absorption studies of free base and rare earth incorporated phthalocyanine doped borate glass matrix are reported for the first lime. The absorption spectra recorded in the UV- VIS region show two well defined absorption bands of phthalocyanine (Pc) molecule, namely the Soret band (B) and the Q band. The Q band always shows its characteristic splitting in all the doped glass matrices and the intensities of these components are found to vary from one Pc to another. Some of the important optical parameters, namely optical absorption coefficient (a), molar extinction coefficient (ε), absorption cross section (σa), oscillator strength (f), electric dipole strength (q2), absorption half bandwidth (Δλ) of the principal optical transitions have also been evaluated. Moreover, the spectral dependence of refractive index (n) and thereby the optical dielectric constant (ε) on wavelength yielded values of carrier concentration to effective mass ratio (N/m*) of the phthalocyanine molecule in the present glassy systems. Optical band gap (Eg) and width of the band tail (Et) are computed and their variations among the prepared samples are also discussed.

Optical properties of phthalocyanine molecules in cyano acrylate polymer matrix

Optical absorption and emission spectral studies of various phthalocyanine molecules, viz., LaPc, NdPc, SmPc, EuPc, CuPc and ZnPc in a polymer matrix of cyano acrylate are reported for the first time. All the absorption spectra show an intense B band (Soret) in the UV region followed by a weaker Q band in the visible region. The positions of the Q and B bands are found to have dependence on the metallic substitution. Values of the important spectral parameters, viz., molar extinction coefficient (ϵ), oscillator strength (f), radiative transition rate and decay time of the excited singlet state are also presented and compared with other solid matrices. The recorded fluorescence spectrum shows two broad emission bands in the case of NdPc, whereas for ZnPc only a very weak band is observed. The absence of emission bands for the other metallated phthalocyanines is attributed to increased spin orbit interaction and intersystem crossing.

NIR to UV absorption spectra and the optical constants of phthalocyanines in glassy medium

Optical absorption studies of phthalocyanines (Pc-s) in borate glass matrix have been reported for the first time. Measurements have been done corresponding to photon energies between 1.1 and 6.2 eV for free base, manganese, iron, nickel, molybdenum, cobalt and copper phthalocyanines. Several new discrete transitions are observed in the UV–vis region of the spectra in addition to a strong continuum component of absorption in the IR region. Values of some of the important optical constants viz. absorption coefficient (α), molar extinction coefficient (ε), absorption cross-section (σa), band width (Δλ), electric dipole strength (q2) and oscillator strength (f) for the relevant electronic transitions are also presented. All the data reported for Pc-s in the new matrix have been compared with those corresponding to solution, vapor and thin film media.

Optical properties of porphyrins in borate glassy matrix

Optical properties of free and substituted porphyrins (PP) doped borate glass matrix are reported for the first time. Absorption spectral measurements of H2TPP, CdTPP, MgTPP and ZnTPP doped borate glass matrix have been made in the 200–1100 nm region and the spectra obtained are analyzed to obtain the optical bandgap (Eg) and other important spectral parameters viz. oscillator strength (f), molar extinction coefficient (ε), electric dipole strength (q2), absorption cross-section (σa) and molecular concentration (N). Intense fluorescence was observed in the region 668–685 nm for CdTPP, ZnTPP and MgTPP doped matrices, whereas no such fluorescence was observed in H2TPP doped matrix. Fluorescence intensity was observed to be almost similar in all the metallated porphyrine matrices. Fluorescence bandwidth (Δλ), decay time (τ), stimulated emission cross-section (σ) and optical gain (G) of the principal fluorescence transitions corresponding to the Q-band excitation were also evaluated and discussed.

“A comparative study of medium and large pore zeolites in alkylation reactions”

Zeolites have established themselves as industrial catalysts for over two decades for a variety of hydrocarbon processing reactions where acidity and shape selectivity are important factors. As solid catalysts, zeolites may be advantageous and superior compared to their homogenous counterparts due to their characteristic properties. It is only in recent years that the utility of zeolites for organic synthesis is recognized for producing specific organic intermediates and fine chemicals in high selectivity. In this thesis an attempt has been made to compare the catalytic activity of some medium and large pore zeolites in a few alkylation and acylation reactions. The work reported in the present study is basically centered around the following zeolites namely, ZSM-5, mordenite, zeolite Y and beta. The major reactions carried out were benzoylation of o-xylene, propionylation of toluene and anisole and benzylation of oxylene. . The programme involves the synthesis, modifications and characterization of the zeolite catalysts by various methods. The influence of various parameters such as non-framework cations, Si/Al ratio of zeolites, temperature of the reaction, catalyst concentration, molar ratio of the reactants and recycling of the catalysts were also examined upon the conversion of reactants and the formation of the desired products in the alkylation/ acylation reactions. The general conclusions drawn by us from the results obtained are summarized in the last chapter of the thesis. Zeolite beta ofi'ers interesting opportunities as a potential catalyst in alkylation reactions and the area of catalysis by medium and large pore zeolites is very fascinating and there is plenty of scope for further research in this field. Moreover, zeolite based catalysts are effective in meeting current industrial processing and more stringent environment pollution limits.

Synthesis, characterization and physiochemical information, along with antimicrobial studies of some metal complexes derived from an ON donor semicarbazone ligand

Eight new transition metal complexes of benzaldehyde-N(4)–phenylsemicarbazone have been synthesized and characterized by elemental analyses, molar conductance, electronic and infrared spectral studies. In all the complexes, the semicarbazone is coordinated as neutral bidentate ligand. 1H NMR spectrum of [Zn(HL)2(OAc)2] shows that there is no enolisation of the ligand in the complex. The magnetic susceptibility measurements indicate that Cr(III), Mn(II), Fe(III), Co(II) and Cu(II) complexes are paramagnetic and Ni(II) is diamagnetic. The EPR spectrum of [Mn(HL)2(OAc)2] in DMF solution at 77K shows hyperfine sextet with low intensity forbidden lines lying between each of the two main hyperfine lines. The g values calculated for the [Cu(HL)2SO4] complex in frozen DMF, indicate the presence of unpaired electron in the dx2−y2 orbital. The metal ligand bonding parameters evaluated showed strong in-plane bonding and in-plane bonding. The ligand and complexes were screened for their possible antimicrobial activities.

Synthesis, Characterization and Applications of Modified TiO2 Systems

This thesis is divided in to 9 chapters and deals with the modification of TiO2 for various applications include photocatalysis, thermal reaction, photovoltaics and non-linear optics. Chapter 1 involves a brief introduction of the topic of study. An introduction to the applications of modified titania systems in various fields are discussed concisely. Scope and objectives of the present work are also discussed in this chapter. Chapter 2 explains the strategy adopted for the synthesis of metal, nonmetal co-doped TiO2 systems. Hydrothermal technique was employed for the preparation of the co-doped TiO2 system, where Ti[OCH(CH3)2]4, urea and metal nitrates were used as the sources for TiO2, N and metals respectively. In all the co-doped systems, urea to Ti[OCH(CH3)2]4 was taken in a 1:1 molar ratio and varied the concentration of metals. Five different co-doped catalytic systems and for each catalysts, three versions were prepared by varying the concentration of metals. A brief explanation of physico-chemical techniques used for the characterization of the material was also presented in this chapter. This includes X-ray Diffraction (XRD), Raman Spectroscopy, FTIR analysis, Thermo Gravimetric Analysis, Energy Dispersive X-ray Analysis (EDX), Scanning Electron Microscopy(SEM), UV-Visible Diffuse Reflectance Spectroscopy (UV-Vis DRS), Transmission Electron Microscopy (TEM), BET Surface Area Measurements and X-ray Photoelectron Spectroscopy (XPS). Chapter 3 contains the results and discussion of characterization techniques used for analyzing the prepared systems. Characterization is an inevitable part of materials research. Determination of physico-chemical properties of the prepared materials using suitable characterization techniques is very crucial to find its exact field of application. It is clear from the XRD pattern that photocatalytically active anatase phase dominates in the calcined samples with peaks at 2θ values around 25.4°, 38°, 48.1°, 55.2° and 62.7° corresponding to (101), (004), (200), (211) and (204) crystal planes (JCPDS 21-1272) respectively. But in the case of Pr-N-Ti sample, a new peak was observed at 2θ = 30.8° corresponding to the (121) plane of the polymorph brookite. There are no visible peaks corresponding to dopants, which may be due to their low concentration or it is an indication of the better dispersion of impurities in the TiO2. Crystallite size of the sample was calculated from Scherrer equation byusing full width at half maximum (FWHM) of the (101) peak of the anatase phase. Crystallite size of all the co-doped TiO2 was found to be lower than that of bare TiO2 which indicates that the doping of metal ions having higher ionic radius into the lattice of TiO2 causes some lattice distortion which suppress the growth of TiO2 nanoparticles. The structural identity of the prepared system obtained from XRD pattern is further confirmed by Raman spectra measurements. Anatase has six Raman active modes. Band gap of the co-doped system was calculated using Kubelka-Munk equation and that was found to be lower than pure TiO2. Stability of the prepared systems was understood from thermo gravimetric analysis. FT-IR was performed to understand the functional groups as well as to study the surface changes occurred during modification. EDX was used to determine the impurities present in the system. The EDX spectra of all the co-doped samples show signals directly related to the dopants. Spectra of all the co-doped systems contain O and Ti as the main components with low concentrations of doped elements. Morphologies of the prepared systems were obtained from SEM and TEM analysis. Average particle size of the systems was drawn from histogram data. Electronic structures of the samples were identified perfectly from XPS measurements. Chapter 4 describes the photocatalytic degradation of herbicides Atrazine and Metolachlor using metal, non-metal co-doped titania systems. The percentage of degradation was analyzed by HPLC technique. Parameters such as effect of different catalysts, effect of time, effect of catalysts amount and reusability studies were discussed. Chapter 5 deals with the photo-oxidation of some anthracene derivatives by co-doped catalytic systems. These anthracene derivatives come underthe category of polycyclic aromatic hydrocarbons (PAH). Due to the presence of stable benzene rings, most of the PAH show strong inhibition towards biological degradation and the common methods employed for their removal. According to environmental protection agency, most of the PAH are highly toxic in nature. TiO2 photochemistry has been extensively investigated as a method for the catalytic conversion of such organic compounds, highlighting the potential of thereof in the green chemistry. There are actually two methods for the removal of pollutants from the ecosystem. Complete mineralization is the one way to remove pollutants. Conversion of toxic compounds to another compound having toxicity less than the initial starting compound is the second way. Here in this chapter, we are concentrating on the second aspect. The catalysts used were Gd(1wt%)-N-Ti, Pd(1wt%)-N-Ti and Ag(1wt%)-N-Ti. Here we were very successfully converted all the PAH to anthraquinone, a compound having diverse applications in industrial as well as medical fields. Substitution of 10th position of desired PAH by phenyl ring reduces the feasibility of photo reaction and produced 9-hydroxy 9-phenyl anthrone (9H9PA) as an intermediate species. The products were separated and purified by column chromatography using 70:30 hexane/DCM mixtures as the mobile phase and the resultant products were characterized thoroughly by 1H NMR, IR spectroscopy and GCMS analysis. Chapter 6 elucidates the heterogeneous Suzuki coupling reaction by Cu/Pd bimetallic supported on TiO2. Sol-Gel followed by impregnation method was adopted for the synthesis of Cu/Pd-TiO2. The prepared system was characterized by XRD, TG-DTG, SEM, EDX, BET Surface area and XPS. The product was separated and purified by column chromatography using hexane as the mobile phase. Maximum isolated yield of biphenyl of around72% was obtained in DMF using Cu(2wt%)-Pd(4wt%)-Ti as the catalyst. In this reaction, effective solvent, base and catalyst were found to be DMF, K2CO3 and Cu(2wt%)-Pd(4wt%)-Ti respectively. Chapter 7 gives an idea about the photovoltaic (PV) applications of TiO2 based thin films. Due to energy crisis, the whole world is looking for a new sustainable energy source. Harnessing solar energy is one of the most promising ways to tackle this issue. The present dominant photovoltaic (PV) technologies are based on inorganic materials. But the high material, low power conversion efficiency and manufacturing cost limits its popularization. A lot of research has been conducted towards the development of low-cost PV technologies, of which organic photovoltaic (OPV) devices are one of the promising. Here two TiO2 thin films having different thickness were prepared by spin coating technique. The prepared films were characterized by XRD, AFM and conductivity measurements. The thickness of the films was measured by Stylus Profiler. This chapter mainly concentrated on the fabrication of an inverted hetero junction solar cell using conducting polymer MEH-PPV as photo active layer. Here TiO2 was used as the electron transport layer. Thin films of MEH-PPV were also prepared using spin coating technique. Two fullerene derivatives such as PCBM and ICBA were introduced into the device in order to improve the power conversion efficiency. Effective charge transfer between the conducting polymer and ICBA were understood from fluorescence quenching studies. The fabricated Inverted hetero junction exhibited maximum power conversion efficiency of 0.22% with ICBA as the acceptor molecule. Chapter 8 narrates the third order order nonlinear optical properties of bare and noble metal modified TiO2 thin films. Thin films were fabricatedby spray pyrolysis technique. Sol-Gel derived Ti[OCH(CH3)2]4 in CH3CH2OH/CH3COOH was used as the precursor for TiO2. The precursors used for Au, Ag and Pd were the aqueous solutions of HAuCl4, AgNO3 and Pd(NO3)2 respectively. The prepared films were characterized by XRD, SEM and EDX. The nonlinear optical properties of the prepared materials were investigated by Z-Scan technique comprising of Nd-YAG laser (532 nm,7 ns and10 Hz). The non-linear coefficients were obtained by fitting the experimental Z-Scan plot with the theoretical plots. Nonlinear absorption is a phenomenon defined as a nonlinear change (increase or decrease) in absorption with increasing of intensity. This can be mainly divided into two types: saturable absorption (SA) and reverse saturable absorption (RSA). Depending on the pump intensity and on the absorption cross- section at the excitation wavelength, most molecules show non- linear absorption. With increasing intensity, if the excited states show saturation owing to their long lifetimes, the transmission will show SA characteristics. Here absorption decreases with increase of intensity. If, however, the excited state has strong absorption compared with that of the ground state, the transmission will show RSA characteristics. Here in our work most of the materials show SA behavior and some materials exhibited RSA behavior. Both these properties purely depend on the nature of the materials and alignment of energy states within them. Both these SA and RSA have got immense applications in electronic devices. The important results obtained from various studies are presented in chapter 9.

Synthesis and Characterization of Novel Spiro-Starburst-Structures as Blue Light Emitters and Zeolites

Spiro-starburst-structures with symmetric globular structures in forms of first and second generations that readily form stable amorphous glasses have been synthesized and then characterised in this work. During the synthesis of these materials, possibilities of the extension of the chains of the phenyl rings in 2,2’,7 and 7’-positions of the central core of the spirobifluorene as well as the 2’,7 and 7’-positions of the terminal spirobifluorene units of the spiro-starburst-structures have been investigated so that solubilities and morphologies of the compounds are not negatively influenced. Their morphological properties have been explored by recording their decomposition temperature and glass transition temperature. These compounds possessing two perpendicular arrangement of the two molecular halves show high glass transition temperature (Tg), which is one of the most important parameter indicating the stability of the amorphous state of the material for optoelectronic devices like organic light emitting diodes. Within the species of second generation compounds, for example, 4-spiro3 shows the highest Tg (330 °C) and the highest branching degree. When one [4B(SBF)SBF-SBF 84] or two [4SBFSBF-SBF 79] terminal spirobifluorene units are removed, the Tg decreases to 318 °C and 307 °C respectively. Photo absorption and fluorescence spectra and cyclic voltammetry measurements are taken in account to characterize the optoelectronic properties of the compounds. Spiro-starburst-structures emit radiation in the blue region of the visible spectrum. The peak maxima of absorption and emission spectra are observed to be at higher wavelength in the molecules with longer chromophore chains than in the molecules with shorter chromophore chains. Excitation spectra are monitored with their emission peak maxima. The increasing absorbing species in molecule leads to increasing molar extinction coefficient. In the case of 4B(TP)SBF-SBF 53 and 4B(SBF)SBF-SBF 84, the greater values of the molar extinction coefficients (43*104 and 44*104 L mol-1 cm-1 respectively) are the evidences of the presence of four times octiphenyl conjugation rings and eight times terminal fluorene units respectively. The optical properties of solid states of these compounds in the form of thin film indicate that the intermolecular interaction and aggregation of individual molecules in neat amorphous films are effectively hindered by their sterically demanding structures. Accordingly, in solid state, they behave like isolated molecules in highly dilute solution. Cyclic voltammetry measurements of these compounds show electrochemically reversibility and stability. Furthermore, the zeolitic nature (host-guest) of the molecular sieve of the synthesized spiro-starburst-structures has been analysed by thermogravimetric analysis method.

Actitudes de los directivos en torno a la adopción del e-learning como herramienta de trabajo en las empresas

El desarrollo del presente documento constituye una investigación sobre las actitudes de los directivos frente a la adopción del e-learning como herramienta de trabajo en las organizaciones de Bogotá. Para ello se realizó una encuesta a 101 directivos, tomando como base el tipo de muestreo de conveniencia; esto con el objetivo de identificar sus actitudes frente al uso del e-learning y su influencia dentro de la organización. Como resultado se obtuvo que las actitudes de los directivos influencian en el uso de herramientas e-learning, así como también en las acciones que promueven su uso y en las actitudes de los empleados; por otro lado se identificó que las creencias relacionadas con la apropiación de herramientas e-learning y los factores facilitadores del uso de estas, influencian en las actitudes de los directivos. Lo anterior, corresponde a los análisis llevados a cabo a partir de los resultados contrastados con los estudios empíricos hallados y el marco teórico desarrollado.

Implicaciones de los canales sostenidos y transitorios de la memoria episódica.

Verificar en qué medida el modelo transitorio-sostenido, permite reinterpretar el fenómeno molar de la memoria icónica. Esta investigación se inscribe, pues, dentro de la teoría psicofisiológica, que considera el sistema visual humano compuesto de dos subsistemas independientes. Experimento I: 11 sujetos, 6 mujeres y 5 hombres. Ninguno tenía problemas de vista ni trastornos de lateralidad. Experimento II: 10 sujetos, 6 mujeres y 5 hombres con las mismas características que la población anterior. Experimento III: 10 sujetos, 3 mujeres y 7 hombres con las características mencionadas anteriormente. Experimento I: diseño intragrupo de tipo factorial 2x3 con ambos factores cruzados. El factor 1, tipo de presentación del estímulo: presentación por aparición súbita del estímulo crítico y presentación por desaparición de todos los estímulos irrelevantes excepto el estímulo crítico. El factor 2, la zona retiniana: zona foveal, zona media y zona periférica. Variable dependiente: tiempo de reacción. Experimento II: diseño intragrupo de tipo factorial 3x3. El factor 1, tipo de presentación: súbita, desaparición y presentación súbita después de presentar las figuras. El factor 2, zona retiniana, análogo al experimento anterior. Variable dependiente: tiempo de reacción. Experimento III: diseño intragrupo de tipo factorial 2x2x2. El factor 1 y 2 son los mismos que en el experimento 1. El factor 3, clase de estímulo, tiene dos niveles: discriminación fácil (cruz-círculo) y discriminación difícil (cruz-aspa). Taquitoscopio, cronoscopios, hoja de instrucciones, hoja de recogida de datos, estímulos, cruz o círculo dibujados sobre tarjetas blancas. Los experimentos demuestran que los estímulos presentados bruscamente necesitan menos tiempo para ser procesados que aquellos otros, que, estando dentro del campo visual, permanecen en él de forma estática. Son, por tanto, un apoyo más a la teoría de la existencia de dos componentes en el sistema transitorio.

Relación entre entrenamiento en habilidades sociales, locus de control y rendimiento académico.

Se pretende comprobar si el entrenamiento en habilidades sociales afecta al locus de control. Si se disminuye el malestar y se incrementa la probabilidad de respuesta (asertividad) con el entrenamiento en habilidades sociales. Si el entrenamiento en habilidades sociales. Si el entrenamiento en habilidades sociales repercute positivamente en las calificaciones académicas. 48 alumnos de segundo de BUP, con una media de edad de 16,2 años. Variable independiente: a nivel molar la variable independiente fue el programa complejo de entrenamiento en habilidades sociales con dos niveles, uno experimental, de entrenamiento y otro de control, sin entrenamiento. Las técnicas que se incluyen en el entrenamiento fueron: a) instrucciones, modelado, ensayo comportamental, feedback informativo y reforzamiento, así como tareas para casa; b) variables criteriales, locus de control, con tres grupos, locus interno, grupo intermedio y locus externo. c) variables dependientes: calificaciones escolares de las asignaturas de Matemáticas y Lengua, obtenidas durante el curso. Puntuaciones obtenidas en el inventario de aserción de Gambril. Mide el grado de malestar y la probabilidad de realizar cierta conducta. Puntuaciones obtenidas en el locus de control. d) variables controladas: edad, nivel escolar, locus de control, control de doble ciego, efecto de los instructores. Cuestionario de locus de control. Inventario de aserción. Fichas y autorregistros de habilidad social. Aparatos y material audiovisual. Nuestro entrenamiento en habilidades sociales modifica el locus de control en la dirección esperada, es decir, las personas ganan en internalidad y pierden en externalidad. Este efecto, no obstante, está modulado por el mismo locus: es más pronunciado en las personas externas que en las medias e internas. Nuestro entrenamiento en habilidades sociales incrementa la asertividad, de manera significativa. Este entrenamiento disminuye la ansiedad (malestar en la respuesta), en concordancia con lo postulado y encontrado por los distintos autores e investigaciones. Nuestro entrenamiento en habilidades sociales no modifica el rendimiento académico, ni para la calificación en Lengua, ni para la calificación en Matemáticas, en contradicción con nuestras expectativas apoyadas en la literatura experimental sobre el tema. Este resultado no se debe atribuir a que nuestro entrenamiento sea inocuo a este respecto; a nuestro juicio, la causa de este resultado se encuentra en la forma en que hemos medido el rendimiento académico: a través de calificaciones e inmediatamente despues del entrenamiento en habilidades sociales. Se sugiere la importancia de estudiar las bases de los cambios que genera en entrenamiento las habilidades sociales. Para ello, se debería tener en cuenta factores como la autoestima, la ansiedad, el locus de control, la inteligencia social y el ajuste personal, entre otros. Se propone el estudio de la relación entre todos los factores mencionados y sus interacciones.

Implicaciones de los canales sostenidos y transitorios en la memoria icónica.

El objetivo es tratar de verificar en qué medida el modelo transitorio-sostenido permite reinterpretar el fenómeno molar de la memoria icónica. Experimento I: 11 sujetos; Experimento II: 10 sujetos; Experimento III: 10 sujetos. Exp. I: Se utilizó un diseño intragrupo de tipo factorial 2x3 con ambos factores cruzados. El primer factor es el tipo de presentación del estímulo: presentación por aparición súbita del estímulo crítico y presentación por desaparición de todos los estímulos irrelevantes excepto el estímulo crítico. El segundo factor es la zona retiniana sobre la que se proyecta el estímulo: zona foveal, zona media y zona periférica; Exp. II: Se trata también de un diseño intragrupo de tipo factorial 3x3. El factor uno es el tipo de presentación del estímulo y tiene tres niveles: presentación por aparición súbita del estímulo, presentación por desaparición súbita de todas las figuras que acompañan al estímulo y presentación súbita del estímulo inmediatamente después de presentar las figuras. El factor dos, la zona retiniana, fue análoga al exp.I y así mismo la variable dependiente fue el tiempo de reacción del juicio discriminativo (círculos versus cruces); Exp. III: Intragrupo de tipo factorial 2x2x2. El factor uno y dos son los mismos que en el experimento I, aún cuando en el presente exp. sólo se utilizaron dos zonas retinianas (foveal y retiniana). El factor 3, clase de estímulo con dos niveles: discriminación fácil (cruz-círculo) y discriminación difícil (cruz-aspa). Taquistoscopio, cronoscopio, hoja de instrucciones, estímulos, hojas de recogida de datos. Exp. I: Se encontró una gran diferencia entre las dos modalidades de presentación del estímulo (aparición-desaparición); Exp. II: Igual que en el experimento anterior existen diferencias significativas en la zona retiniana y altamente signiticativa en la modalidad de presentación del estímulo y, sorprendentemente, también aparece significativa la interacción. Esta interacción resulta difícil de explicar ya que de tener algún significado debería haber aparecido también en el experimento anterior; Exp. III: Se observa cómo los tiempos de reacción de la discriminación difícil son mayores en todos los casos que los TR de la discriminación fácil. Existen diferencias altamente significativas entre las zonas retinianas confirmando los exp. anteriores. También son significativas las diferencias entre las modalidades de discriminación, la interacción también es significativa. Los tres experimentos demuestran de forma claramente significativa que los estímulos presentados bruscamente necesitan menos tiempo para ser procesados que aquéllos otros que estando ya dentro del campo visual permanecen en él de forma estática. Son por lo tanto, un apoyo más a la teoría que defiende la existencia de dos componentes en el sistema visual: un componente transitorio que responde rápidamente a los estímulos en movimiento y un componente sostenido que responde más lentamente a los estímulos estáticos. Fecha de finalización tomada del código del documento.

Soluciones hipertónicas en trauma craneoencefálico: revisión sistemática de la literatura

El traumatismo craneoencefálico, es la epidemia silenciosa de nuestra época, que genera gastos en salud, en países como Estados Unidos, cercanos a los 60 billones de dólares anuales, y cerca de 400 billones en rehabilitación de los discapacitados. El pilar del manejo médico del trauma craneoencefálico moderado o severo, es la osmoterapia, principalmente con sustancias como el manitol y las soluciones hipertónicas. Se realizó la revisión de 14 bases de datos, encontrando 4657754 artículos, quedando al final 40 artículos después de un análisis exhaustivo, que se relacionaban con el manejo de la hipertensión endocraneana y terapia osmótica. Resultados: Se compararon diferentes estudios, encontrando gran variabilidad estos, sin homogenización en los análisis estadísticos, y la poca rigurosidad no permitieron, la recolección de datos y la comparación entre los diferentes estudios, no permitió realizar el meta-análisis y por esto se decidió la realización de una revisión sistemática de la literatura. Se evidenció principalmente tres cosas: la primera es la poca rigurosidad con la que se realizan los estudios clínicos; la segunda, es que aún falta mucha más investigación principalmente, la presencia de estudios clínicos aleatorizados multicéntricos, que logren dar una sólida evidencia y que genere validez científica que se requiere, a pesar de la evidencia clara en la práctica clínica; la tercera es la seguridad para su uso, con poca presencia de complicaciones para las soluciones salinas hipertónicas.