Importância do tratamento estético periodontal na reabilitação protética

Gingival recession is a common deformity that affects a large number of people. This condition is frequently associated with esthetic complains and may lead to dental hypersensitivity. Thus, various surgical procedures have been proposed to provide root coverage. Since the 1950s, free and pedicle gingival grafts have been greatly used for treating gingival recession. However, after the 1985 Miller gingival recession classification, and with the development of other appropriated techniques that use subepithelial connective tissue grafts, gingival recession treatments have resulted in more predictable outcomes, especially with respect to Class I and II sites, i.e., in the absence of interproximal bone loss. This article reported the importance of aesthetical periodontal treatment in the prosthetic rehabilitation of a patient with a class I gingival recession with 3 mm of vertical extension in the superior canine. The treatment plan consisted of root coverage using subepithelial connective tissue graft (SCTG) associated with construction of new prosthesis.

Perception of Risk of Musculoskeletal Disorders Among Brazilian Dental Students

The aim of this study was to compare the mean scores of perceived risk factors for the development of musculoskeletal disorders in dental students presently pursuing work/study, according to gender, course series, and the presence of pain/discomfort. The participants were 348 students from the undergraduate course in dentistry at a Brazilian public university. The instrument on work-related factors that could contribute to osteomuscular symptoms and part of the Nordic questionnaire were used. The psychometric properties of the first instrument were estimated. A multivariate analysis of variance (MANOVA) revealed that the instrument had a tri-factorial structure (s2 retained: 62.72 percent). The retained factors were repetitiveness, work posture, and external factors. The internal consistency and reproducibility were adequate (α=0.746 to 0.873; p=0.729 to 0.940). Lower mean scores of perceived external factors were observed for the male participants, as well as lower scores in the three dimensions of the instrument for first-year students of the course and for those who did not report pain/discomfort in the neck, feet, and ankles. The authors concluded that the perception of risk factors for musculoskeletal disorders reported in the work/study environment of dental students was significantly related to gender, the course series, and the presence of pain/discomfort.

Individual and contextual factors related to dental caries in underprivileged Brazilian adolescents

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Quality of life and socio-dental impact among underprivileged brazilian adolescents

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Portland cement use in dental root perforations: a long term followup

Root canal and furcal perforations are causes of endodontic therapy failure and different materials that stimulate tissue mineralization have been proposed for perforation treatment. In the first case, a patient presented tooth 46 with unsatisfactory endodontic treatment and a periapical radiographic lesion. A radiolucent area compatible with a perforating internal resorption cavity was found in the mesial root. The granulation tissue was removed, and root canals were prepared. The intracanal medication was composed of calcium hydroxide and the perforation cavity was filled with Portland cement. The 11-year followup showed radiographic repair of the tissue adjacent to the perforation and absence of clinical signs and symptoms or periapical lesion. In the second case, a patient presented with edema on the buccal surface of tooth 46. The examination showed a radiolucent area in the furcation region compatible with an iatrogenic perforation cavity. The mesial root canals were calcified, and only the distal root canal was prepared. The cavity was filled with a calcium hydroxide-based paste and the distal root canal was obturated. In sequence, the perforation cavity was filled with Portland cement. The 9-year followup showed the tooth in masticatory function with radiographic and clinical aspects compatible with normality.

Bond strenght of dental adhesive systems irradiated with ionizing irradiation

The aim of the present paper was to determine the effect of different types of ionizing radiation on the bond strength of three different dentin adhesive systems. Materials and Methods: One hundred twenty specimens of 60 human teeth (protocol number: 032/2007) sectioned mesiodistally were divided into 3 groups according to the adhesives systems used: SB (Adper Single Bond Plus), CB (Clearfil SE Bond) and AP (Adper Prompt Self-Etch). The adhesives were applied on dentin and photo-activated using LED (Lec 1000, MMoptics, 1000 mW/cm2). Customized elastomer molds (0.5 mm thickness) with three orifices of 1.2 mm diameter were placed onto the bonding areas and filled with composite resin (Filtek Z-250), which was photoactivated for 20 s. Each group was subdivided into 4 subgroups for application of the different types of ionizing radiation: ultraviolet radiation (UV), diagnostic x-ray radiation (DX), therapeutic x-ray radiation (TX) and without irradiation (control group, CG). Microshear tests were carried out (Instron, model 4411), and afterwards the modes of failure were evaluated by optical and scanning electron microscope and classified using 5 scores: adhesive failure, mixed failures with 3 significance levels, and cohesive failure. The results of the shear bond strength test were submitted to ANOVA with Tukey's test and Dunnett's test, and the data from the failure pattern evaluation were analyzed with the Mann Whitney test (p = 0.05). Results: No change in bond strength of CB and AP was observed after application of the different radiation types, only SB showed increase in bond strength after UV (p = 0.0267) irradiation. The UV also changed the failure patterns of SB (p = 0.0001). Conclusion: The radio-induced changes did not cause degradation of the restorations, which means that they can be exposed to these types of ionizing radiation without weakening the bond strength.

Dentinogenesis imperfecta type II: approach for dental treatment

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Occupational exposure to contaminated biological material: perceptions and feelings experienced among dental students

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Burnout in dental students: effectiveness of different methods

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Dental and skeletal components of Class II open bite treatment with a modified Thurow appliance

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Dose-Response and Time-Course of a-Tocoferol Mediating the Cytoprotection Of Dental Pulp Cells Against Hydrogen Peroxide

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Mineral Loss and Morphological Changes in Dental Enamel Induced by a 16% Carbamide Peroxide Bleaching Gel

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Three-dimensional dental arch changes of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusion

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Streptococcus mutans adhesion and releasing of metallic ions in dental alloys

AIM: To evaluate the adherence of Streptococcus mutans to the surface of the amalgam and copper/aluminum alloy samples and also evaluate the release of metallic ions. METHODS: The prepared medium was changed every 72 h and analyzed by atomic absorption spectrophotometer. Samples were removed from the prepared medium at 15, 30, 48 and 60 days. RESULTS: The result shows that ions released were statistically different among all groups, and so were both biofilm and pits formation and the corrosion induced by the S. mutans in both types of samples. SEM observation of the samples immersed in the prepared medium with S. mutans showed adherence of microorganisms on the whole surface, in all groups. CONCLUSIONS: The S. mutans adhere to both amalgam and copper/aluminum alloy causing corrosion of those restorations. S. mutans produced a greater ions release in Cu/Al alloy; in amalgam, the ions release was not influenced by exposure to S. mutans.

Dental development of children and adolescents with cleft lip and palate

Aim: To evaluate the dental development of Brazilian children and adolescents with cleft lip and palate. Methods: The sample consisted of 107 panoramic radiographs of children and adolescents with cleft lip and/or palate (cleft group) and 107 panoramic radiographs of children and adolescents without cleft lip and/or palate (control group), with chronological ages ranging from 6 to 15 years, matched in gender and chronological age within 60 days. Radiographs were digitized and masked and dental age was assessed using the method described by Demirjian et al. (1973). Three trained examiners conducted the assessments. Each examiner evaluated the radiographs three times. Data were statistically analyzed using non-parametric tests and univariate linear regression (p<0.05). Results: The dental age was overestimated in relation to the chronological age in both groups (p<0.0001). Compared to the control group, there was a delay in the dental age in the cleft group of 0.17 years (2.1 months). However, no statistically significant difference in the dental age between the cleft and the control group was found even when considering the different cleft types (p=0.152). Conclusions: There was no statistically significant difference in the dental age between the cleft and the control groups. The evaluation of dental development in individuals with cleft lip and palate should be approached in the same way as in individuals without clefts, with a focus on the individualization of diagnosis and treatment planning.