Étude exploratoire de la phase d’usage des produits électroniques en vue de minimiser les impacts environnementaux : le cas du téléviseur

À cause de leur impact environnemental élevé, les déchets d’équipements électriques et électroniques (DEEE) sont un problème majeur pour les pays développés. La consommation importante de produits électroniques, dont la durée d’utilisation est de plus en plus courte, a entrainé une production croissante de DEEE. C’est dans ce contexte que l’Union européenne a instauré en 2003 la responsabilité élargie des producteurs (REP). Cet outil de politique environnementale a rendu légalement responsables les fabricants de la mise en oeuvre et du financement d’un programme d’intendance des DEEE. Alors que la REP vise principalement le traitement écologique des DEEE, cet instrument ne permet pas de réduire les quantités considérables qui sont produites par les consommateurs. Cette situation est d’autant plus inquiétante que les gains environnementaux obtenus, grâce à l’implantation de la REP, ont été annulés au regard de l’augmentation continue de la consommation de biens électroniques à l’échelle mondiale. En réponse à cette problématique, la présente thèse porte sur les pratiques de l’usager au cours de la phase de consommation des appareils électroniques (aussi appelée phase d’usage). Cette étape du cycle de vie regroupe l’achat, l’utilisation, la réparation et la mise au rebut des biens. Une approche qualitative de type exploratoire faisant appel à l’étude de cas a été utilisée. Le téléviseur, retenu comme cas d’étude, illustre des enjeux partagés par plusieurs équipements électroniques, tels que : la fréquente mise sur le marché de nouveaux modèles, le bas prix d’acquisition comparé au coût de la réparation et l’influence de la mode sur les choix effectués par le consommateur. Ces facteurs facilitent le remplacement des biens et, par conséquent, pourraient entrainer leur fin de vie prématurée qui se matérialise à travers différentes formes d’obsolescence. Dans le cadre de cette étude de cas, une trentaine d’entrevues semi-dirigées a été réalisée avec des usagers et réparateurs de produits électroniques en vue de documenter les différentes sous-étapes de la phase d’usage d’un téléviseur. Sur la base des informations recueillies, l’objectif de cette thèse est de formuler des recommandations, à destination des autorités politiques, qui pourront permettre une minimisation des impacts environnementaux liés à la phase d’usage des appareils électroniques. Les résultats ont permis de mettre en évidence, via le rôle et le statut singulier occupé par le téléviseur dans les foyers, les comportements de l’usager contribuant à augmenter l’empreinte écologique associée à la phase d’usage. L’acquisition de nombreux biens électroniques et non électroniques suite à l’achat du téléviseur, ses multiples fonctionnalités le rapprochant de celles de l’ordinateur et des tablettes, ainsi que la fin de vie prématurée de produits fonctionnels, mais obsolètes d’un point de vue technologique, font partie des résultats de cette recherche. En lien avec ces constats, cette étude propose des instruments de politique environnementale, dont l’affichage de la durée de vie des équipements électroniques, destinés à aider le consommateur à réaliser des choix plus éclairés au moment de l’achat. D’autres orientations, telles que la possibilité d’évoluer vers une réglementation horizontale, c’est-à-dire un cadre législatif qui ne se basera plus sur le produit individuel, mais sur l’ensemble des appareils ayant des fonctionnalités similaires, sont exposées. Par ailleurs, cette recherche explore certains leviers pouvant minimiser le phénomène de fin de vie prématurée des appareils électroniques, tels que l’envoi de biens obsolètes et fonctionnels des pays développés vers ceux en développement pour permettre leur réutilisation et la tendance du Do-It- Yourself dans la réparation des produits électroniques.

Cost-effectiveness of Transcatheter Mitral Valve Leaflet Repair for the Treatment of Mitral Regurgitation in Heart Failure

Contexte: La régurgitation mitrale (RM) est une maladie valvulaire nécessitant une intervention dans les cas les plus grave. Une réparation percutanée de la valve mitrale avec le dispositif MitraClip est un traitement sécuritaire et efficace pour les patients à haut risque chirurgical. Nous voulons évaluer les résultats cliniques et l'impact économique de cette thérapie par rapport à la gestion médicale des patients en insuffisance cardiaque avec insuffisance mitrale symptomatique. Méthodes: L'étude a été composée de deux phases; une étude d'observation de patients souffrant d'insuffisance cardiaque et de régurgitation mitrale traitée avec une thérapie médicale ou le MitraClip, et un modèle économique. Les résultats de l'étude observationnelle ont été utilisés pour estimer les paramètres du modèle de décision, qui a estimé les coûts et les avantages d'une cohorte hypothétique de patients atteints d'insuffisance cardiaque et insuffisance mitrale sévère traitée avec soit un traitement médical standard ou MitraClip. Résultats: La cohorte de patients traités avec le système MitraClip était appariée par score de propension à une population de patients atteints d'insuffisance cardiaque, et leurs résultats ont été comparés. Avec un suivi moyen de 22 mois, la mortalité était de 21% dans la cohorte MitraClip et de 42% dans la cohorte de gestion médicale (p = 0,007). Le modèle de décision a démontré que MitraClip augmente l'espérance de vie de 1,87 à 3,60 années et des années de vie pondérées par la qualité (QALY) de 1,13 à 2,76 ans. Le coût marginal était 52.500 $ dollars canadiens, correspondant à un rapport coût-efficacité différentiel (RCED) de 32,300.00 $ par QALY gagné. Les résultats étaient sensibles à l'avantage de survie. Conclusion: Dans cette cohorte de patients atteints d'insuffisance cardiaque symptomatique et d insuffisance mitrale significative, la thérapie avec le MitraClip est associée à une survie supérieure et est rentable par rapport au traitement médical.

Supply response and Cost of production of natural rubber- an econometric study

The study deals with the short and long term supply response of the natural rubber in India and to analyse the macro economic environment of NR industry and causative factors of the rubber price crash. It determines the minimum cost of production of natural rubber and to forecast the potential production of NR in India. There is positive response of short run and long run supply to prices. Since correlation analysis show close association between international and domestic price level, international price changes will have its domestic echo. Production and consumption will sustain its rising trend. This makes plans for increasing production estimates show that a mid way level i.e. the range between Rs.32-Rs.38 will give a fair enough profit to the grower in the present situation and provide for the viable sustenance of rubber cultivation. Identification of the SWOT of rubber cultivation would help in supporting rubber cultivation if remedial measures are undertaken with the true spirit. This would help Indian rubber to attain global competitiveness. Then the inflow of valuable foreign exchange will overcome the other economic drawbacks of rubber cultivation

Simple Low-cost Planar Antenna for Indoor Communication under the Bluetooth Protocol

A single-feed rectangular-ring microstrip antenna is proposed for indoor communication under the Bluetooth protocol. The dimensions of the antenna together with the location of the feed point are optimized through field simulations in order to cover the Bluetooth bandwidth and to avoid linear polarization. The performance and the efficiency of the antenna are illustrated in a real indoor environment

Reactive loaded microstrip leaky wave antenna for low cost beam steering applications

A novel fixed frequency beam scanning microstrip leaky wave antenna is reported. The beam scanning at fixed frequency is achieved by reactive loading. Simulation and measured results shows frequency scanability of 80° as well as fixed frequency beam steering of 68° over the −10 dB impedance band of 4.56–5.06 GHz.

Development of Innovative Low Cost Larviculture Technologies of the Giant Fresh Water Prawn,Macrobrachium Rosenbergii(De Man)

School of Industrial Fisheries, Cochin University of Science and Technology

Studies on the macrobenthos of mudbanks of Southwest cost of India

The present study was undsrtaken.with the objectives to assess the distribution and density of population of benthic animals with special reference to macrofauna from the south west coast of India from ' Malippursa 1 in the north to Alleppey in the south, to evaluate significant difference, if any, in the number and distribution of animals in th md bank regions and other intermittent stations, to examine the influence of bottom stability on the distribution of fauna, to observe the effect of the environmental parameters on the distribution pattern of nacrofauna, and to evaluate the nature and depthpwise distribution of the benthic fishery. The region selected for the investigation is one of the nest important fishing grounds in India for bottom fishing especially for prawns, covering a distance of about 60 kns in length.total number of thirty stations in five transects at right angles to the coast, each consisting of six stations were surveyed. The six stations in a transect were at depths of 5 m, 10m, 20:, 30:, 35m and 45m respectively formation of the Iudbanke, popularly known as 'Ghaknra' in the local language, is a peculiar phenomenon along the ooaet of Kerala and provides a good fishing ground.quantitative distribution of the mecrofauna chewed that the maximum number of organism was near the 35 n contour line in the first three profiles whereas in the fourth and fifth profiles it was at 20 n and 30 m depth respectively. The density of the fauna wee comparatively poor in shallow water etatione at depths 5-‘IO M.was a general decline in the numerical abundance and biomass of the bottom fauna in all the stations during the monsoon period. There has been very little yearly change in the composition of the fauna during the two years‘ study.

Investment analysis of chemical projects and development of standerdised mathematical co-relation for cost estimation of pressure vessels in chemical industry

The present study is intended to provide a new scientific approach to the solution of the worlds cost engineering problems encountered in the chemical industries in our nation. The problem is that of cost estimation of equipments especially of pressure vessels when setting up chemical industries .The present study attempts to develop a model for such cost estimation. This in turn is hoped would go a long way to solve this and related problems in forecasting the cost of setting up chemical plants.

A study of the cost structure of the cashew industry in kerala, karnataka and tamilnadu

Since the world demand for cashew kernels has been rising steadily for several years in the past, conferring significant price increase the processing of cashew remains a highly profitable lndustry. India being the earliest and largest supplier of cashew kernels in the world market it is our prestigious obligations to reestablish her pristine monopoly. Further the added importance ot the indutry in the Socio economic context of the State of Kerala makes various measures impervative in order to bring back to the industry its pristine glory at the late sixties to give a face lift and to stabilize the industry. This present study adopts a comprehensive frame work of analysis compassing the major issues involved in the cultivation, distribution, import, processing and marketing of cashew undcr the private and public sector, migration of the industry and the financial requirements of the industry.

Time and cost overruns of industrial projects in kerala

Poor project planning, implementation and control and the subsequent cost and time overruns are ubiquitous features that have been posing serious concern at all levels - state, national and international. It results in wastage of the nation's scarce resources and retards the socio-economic progress. Although several studies peripheral on project overruns have been made at the national level, no serious attempt has been made at the state level to identify the magnitude of overruns, their causes and impacts on industrial projects. The present study "Time and Cost Overruns of Industrial Projects in Kerala" is an earnest attempt to probe in depth the time and cost overruns and their impact on industrial projects. The study places emphasise on the identification of the real reasons behind the cost and time overruns. It also covers the present project management practices of industrial projects in Kerala.

Cost accountancy and cost control in hospitals

It is a fact that there now exists a sound framework of accounting theory to ascertain the working results and the investment status of hospitals. Yet, there is no system of accounting in practice to conduct its activities with utmost efficiency. No attempts have hitherto been made for the continuous improvement in the servics rendered by hospitals. Personal investments in hospitals have made the interaction of business to some extent.Planning, decision making and control assume increasing importance as hospitals grow in size and complexity. Moreover, wise and effective utilisation of resources should be ensured. The importance of cost cannot be overlooked in this context. Cost is the most effective factor in the determination of the prices of hospital services rendered. The important managerial functions have to rely heavily on accurate and timely cost information. More people can be provided with services if no services cost more than what is a must to provide the necessary level of care. The price paid for high cost technology for a few is no technology at all for the many. Hence no pains must be spared in ascertaining, presenting, controlling and reducing costs. An effective system of Cost Accountancy and Cost Control is imperative for the survival of hospitals in the intensely competitive conditions of today. The valuable objective of "better patient care" can be attained only if the management can make use of the various tools and techniques to ascertain, control and reduce each item of cost in hospitals. Constant efforts must be made by the management to continuously improve their services and bring down costs and prices of all hospital services. Cost Accountancy has made its impresssive impact on almost all the spheres of human activities. It is high time a comprehensive Cost Accountancy and Cost Control system be implemented in hospitals. The problem under study thus is the designing of a sound and full-fledged Cost Accountancy and Cost Control system that suits the requirements of hospitals. It is for the first time in India during the evolution of Cost Accountancy that a comprehensive cost system is tried in hospitals.

Waste Water Treatment Using Low Cost Natural Adsorbents

Heavy metals are major toxic pollutants with severe health effects on humans. They are released into the environment from a variety of industrial activities. Cadmium, lead, zinc, chromium and copper are the most toxic metals of widespread use in industries such as tanning, electroplating, electronic equipment manufacturing and chemical processing plants. Heavy metals contribute to a variety of adverse health environmental effects due to their acute and chronic exposure through air, water and food chain. Conventional treatment methods of metal removal are often limited by their cost and ineffectiveness at low concentrations. Adsorption, the use of inactivated biomass as adsorbents offers an attractive potential alternative to their conventional methods. Mango peel and Alisma plantago aquatica are naturally occurring and abundant biomass can offer an economical solution for metal removal.The Cd(II), Pb(II), Zn(II), Cr(III) and Cu(II) adsorption by milled adsorbents of mango peel and Alisma plantago aquatica were evaluated in batches.

CuInS2/In2S3 Cells using a Cost-effective Technique: Significance of Precursor Ratios on Cell Parameters

Thin film solar cells having structure CuInS2/In2S3 were fabricated using chemical spray pyrolysis (CSP) technique over ITO coated glass. Top electrode was silver film (area 0.05 cm2). Cu/In ratio and S/Cu in the precursor solution for CuInS2 were fixed as 1.2 and 5 respectively. In/S ratio in the precursor solution for In2S3 was fixed as 1.2/8. An efficiency of 0.6% (fill factor -37.6%) was obtained. Cu diffusion to the In2S3 layer, which deteriorates junction properties, is inevitable in CuInS2/In2S3 cell. So to decrease this effect and to ensure a Cu-free In2S3 layer at the top of the cell, Cu/In ratio was reduced to 1. Then a remarkable increase in short circuit current density was occurred from 3 mA/cm2 to 14.8 mA/cm2 and an efficiency of 2.13% was achieved. Also when In/S ratio was altered to 1.2/12, the short circuit current density increased to 17.8 mA/cm2 with an improved fill factor of 32% and efficiency remaining as 2%. Thus Cu/In and In/S ratios in the precursor solutions play a crucial role in determining the cell parameters