Effects of different resistance training frequencies on flexibility in older women

Objective: The main purpose of the investigation reported here was to analyze the effect of resistance training (RT) performed at different weekly frequencies on flexibility in older women.Participants and methods: Fifty-three older women (>= 60 years old) were randomly assigned to perform RT either two (n= 28; group "G2x"), or three (n= 25; group "G3x") times per week. The RT program comprised eight exercises in which the participants performed one set of 10-15 repetitions maximum for a period of 12 weeks. Anthropometric, body-composition, and flexibility measurements were made at baseline and post-study. The flexibility measurements were obtained by a fleximeter.Results: A significant group-by-time interaction (P<0.01) was observed for frontal hip flexion, in which G3x showed a higher increase than G2x (+12.8% and +3.0%, respectively). Both groups increased flexibility in cervical extension (G2x=+19.1%, G3x=+20.0%), right hip flexion (G2x=+14.6%, G3x=+15.9%), and left hip flexion (G2x=+25.7%, G3x=+19.2%), with no statistical difference between groups. No statistically significant differences were noted for the increase in skeletal muscle mass between training three versus two times a week (+7.4% vs +4.4%, respectively).Conclusion: Twelve weeks of RT improves the flexibility of different joint movements in older women, and the higher frequency induces greater increases for frontal hip flexion.

A longer time of exposure to antiretroviral therapy improves selenium levels

Background &aims: Selenium is an essential mineral for immunological function, performing crucial functions at the cellular level. This micronutrient has been determined to be frequently deficient in HIV infected patients, with correlations between reduced immunological function and greater susceptibility to opportunistic infections. Our aim was to evaluate the influence of time of exposure to antiretroviral therapy (ART) on the biochemical profile of selenium in HIV-infected patients.Methods: We performed a cross-sectional study on 50 HIV-positive men with different quantitations of viral load and CD4+ T cells, who were either receiving or not receiving ART. Dual energy X-ray absorptiometry (DXA) to determine body composition, biochemical analysis of selenium and albumin, anthropometric measurements were performed. The subjects were divided into groups according to the use of ART or not: The Control Group (CG) was 10 treatment-nave volunteers, Group G < 2 was 20 volunteers on ART for less than 2 years, and Group G > 2 was 20 volunteers on ART for >2 years.Results: The body mass index showed that all subjects were of normal weight. The group with a longer time of exposure to ART (G > 2) had undetectable viremia and a higher CD4+ T cell count: 593.1 +/- 234.6 mm(3). Selenium values (mu g/L) were 55.9 +/- 11.9 for CG, 52.1 +/- 10.5 for G < 2, and 66.9 +/- 20.8 for G > 2, with a significant difference between groups G < 2 and G > 2 (p < 0.05), and only G > 2 showed normal selenium values.Conclusions: Most of the men studied showed selenium deficiency, except for the subjects with a longer exposure to antiretroviral treatment. Thus, an adequate selenium concentration is related to better control of virology and of immunologic function. (C) 2014 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.

Plant density in production of mini lettuce cultivars in organic system management

Production of mini vegetables in organic system is a good alternative to improve profit, but there are no researches about the optimum plant density for these cultivars in Brazilian conditions. Two experiments were conducted to evaluate the production of mini lettuce cultivars in different plant densities. Experiment 1 was conducted from January 1th (sowing) to February 10th (harvesting), 2012. The experimental design was completely randomized blocks, with six treatments in factorial scheme, 3 mini lettuce cultivars (Tudela, Renoir and Sartre) x 2 spacing between plants (16 and 20 cm), with eight replications and plots (2.04 m(2)) with six rows, spaced 15 cm. Experiment 2 was conducted from June 6th (sowing) to July 18th (harvesting), 2012. The cultivars Sartre and Renoir were evaluated under four plant densities (444,444; 333,333; 266,667 and 200,000 plants ha(-1), corresponding to spacing of 15x15, 15x20, 25x15 and 25x20 cm, respectively). Eight treatments were defined by a factorial scheme 2 (cultivars) x 4 (plant densities) and arranged in a completely randomized block design, with nine replications and plots with 2.04 m2. The evaluated characteristics in both experiments were total and marketable fresh weight per plant, plant dry weight, plant diameter and height, marketable yield and discard percentage. In first experiment, during the summer, cultivar Sartre showed the highest marketable fresh weight (72 g plant(-1)). Heaviest plants (91.6 g plant(-1)) were obtained with the higher plant spacing, but the highest yield (2.51 kg m(-2)) was obtained with the smaller spacing. In winter, plants with higher total (190 g plant(-1)) and marketable (146 g planta(-1)) fresh weight were obtained with cultivar Sartre, and the same was observed in low plant density. However, the higher plant density, the higher the yield.

Estudo comparativo in vitro da resistência à remoção de grampos circunferenciais aplicados sobre dentes íntegros e restaurados com resina composta

An experimental study was undertaken in arder to find out lhe behavior of the required force to yield dislodgement of circumierential clasps of removable partial dentures ou two groups of samples. 1 with retentive terminais engaging and acting ou enamel 2 with retentive terminais engaging on enamel and acting on composite resm With this aim a device was designed based on a sewing machine (brand name Elgin) that could repeatedly simulate lhe introduction-removal movement of circunferencial clasps ou the samples. ln addiction the device had a platform to sustain the samples and permit measurements, a cycle counter and a dynamometer. The samples were constructed by inclusion in dental stone of extracted natural molar teeth whose retentive areas were ou natural enamel or composite resin addictions.The clasps were fabricated from wax ups of resin and wax and were cast with chromium cobalt alloy. The composite resin used was one of the last generation, monomodal type, photopolymerized and binded to the enamel by the acid etching technique. Tests were carried out in aqueous enviroment. Is was established a maximum of 5.000 cycles for each of the samples. Observatins were made from 100 to 100 cycles until 2.000 and from 200 to 200 cycles to 5.000. Results showed that variations in the amount of the required force for dislodgement of the clasps from the samples during the test periods had no significancy eather to those with retentive areas on the enamel or to those with retentive fabricated with addictions of composite resin

Linking natural supersymmetry to flavour physics

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do material oclusal na distribuição de tensões em próteses implantossuportadas unitárias

Objective: the aim of this study was to evaluate the influence of occlusal veneering material in single fixed implant-supported crowns through the 3-D finite element method. Material and methods: Four models were fabricated using the Rhinoceros 4.0, SolidWorks, and InVesalius softwares. Each model represented a block of mandibular bone with an external hexagon implant of 5 mm x 10 mm and different veneering materials including NiCr (1), porcelain (2), composite resin (3), and acrylic resin (4). An axial load of 200 N and an oblique load of 100 N were applied. Results: model (2) with porcelain veneering presented a lower stress concentration for the NiCr framework, followed by the composite resin and acrylic resin. The stress distribution to the implant and bone tissue was similar for all models. Conclusions: there is no difference of stress distribution to the implant and supporting structures by varying the veneering material of a single implant-supported prosthesis.

Influência do material oclusal na distribuição de tensões em próteses implantossuportadas unitárias

Objective: the aim of this study was to evaluate the influence of occlusal veneering material in single fixed implant-supported crowns through the 3-D finite element method. Material and methods: Four models were fabricated using the Rhinoceros 4.0, SolidWorks, and InVesalius softwares. Each model represented a block of mandibular bone with an external hexagon implant of 5 mm x 10 mm and different veneering materials including NiCr (1), porcelain (2), composite resin (3), and acrylic resin (4). An axial load of 200 N and an oblique load of 100 N were applied. Results: model (2) with porcelain veneering presented a lower stress concentration for the NiCr framework, followed by the composite resin and acrylic resin. The stress distribution to the implant and bone tissue was similar for all models. Conclusions: there is no difference of stress distribution to the implant and supporting structures by varying the veneering material of a single implant-supported prosthesis.

Micronutrientes e biorregulador via foliar em diferentes estádios de desenvolvimento de cultivares de feijão, visando produção e qualidade de sementes

Pós-graduação em Agronomia - FEIS

GeoGebra e o método de Briot & Bouquet para a resolução gráfica de equações cúbicas

In the mid-nineteenth century, french mathematicians Briot and Bouquet have proposed an intriguing graphical method for solving cubic equations "depressed" - the third degree equations that do not have the quadratic term. The proposal is simple geometric construction, though based on an ingenious algebra. We propose here the verification and testing graphical method through an instructional sequence using the software GeoGebra also present the ingenious algebraic development that resulted in this graphic method for determination of real roots of a cubic equation of the type x³ + px + q = 0 where p and q are real numbers. The method states that these solutions are summarized in the abscissas of the points of intersection of the circumference containing the origin and the center C (-q/2, 1-p/2) with the parable y = x².

Compostos de paládio(II) contendo ligantes N,S-quelantes: síntese, caracterização e investigação da atividade biológica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cobertura e depósito de calda herbicida em cana-de-açúcar em função da largura da barra de pulverização, declividade do terreno e condição meteorológica

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Estimativa da radiação solar global em estufa de polietileno a partir do brilho solar

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)