Caracterização de camadas nitrocementadas por plasma produzidas no aço inoxidável austenítico AISI 316L

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo termoanalítico da perlita hidrofobizada com óleo de linhaça

In this work, expanded perlite, a mineral clay, consisting of SiO2 and Al2O3 in the proportions of 72.1 and 18.5%, respectively, was used as an adsorbent for oil in its pure expanded form as well as hydrofobized with linseed oil. Thermogravimetry (TG), Derivative Thermogravimetry (DTG) and Differential Thermal Analysis (DTA) were used to study the thermal behavior and quantify the percent adsorption of perlite in differents processes comparing the results with the ones obtained using Gravimetric Analysis. In the process of hydrophobization with linseed oil granulometric fractions > 20, 20-32 and 32-60 mesh were used and adsorption tests with crude oil were performed in triplicate at room temperature. The results obtained by TG/DTG in dynamic atmosphere of air showed mass losses in a single step for the expanded perlite with pure adsorbed oil, indicating that the adsorption of oil was limited and that the particle size did not in this process. Linseed oil has performed well as an agent of hydrophobized perlite (32 to 60 mesh) indicating a maximum percentage of 59.9% and 68.6% the linseed with a fraction range from considering the data obtained by thermogravimetry and Gravimetry, respectively. The adsorption of oil in the expanded perlite and hydrofobized pure perlite with linseed oil did not produce good results, characterizing an increase of 0.5 to 4.6% in pure perlite and 3.3% in hydrofobized perlite with granulometric 32 to 60 mesh

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Otimização da síntese de nanoferritas de nizn dopada com cobre e cobalto

Different compositions of Ni0,5-xCuxZn0,5Fe2O4 and Ni0,5-xCoxZn0,5Fe2O4 0 ≤ x ≤ 0.3 were synthesized ferrite y the citrate precursor method. The stoichiometric compositions were calcined in air at 350°C and then pressed into pellets and toroids. The pressed samples were sintered at temperatures of 1000, 1050 and 1100°C/3h in air control at the speed of heating and cooling. The calcined powders were characterized by XRD, TGA / DTG, FTIR, SEM and vibrating sample magnetometry (VSM) and the sintered samples by XRD, SEM, MAV, density and measurements of permeability and magnetic losses. There was pure phase formation ferrimagnetism applied at all temperatures except for A-I composition at all sintering temperatures and A-II only at a temperature of 1100°C. Crystallite sizes were obtained by Rietveld analysis, nanometer size from 11 to 20 nm for the calcined powders. For SEM, the sintered samples showed grain size between 1 and 10 micrometers. Bulk density (ρ) of sintered material presented to the Families almost linear behavior with increasing temperature and a tendency to decrease with increasing concentration of copper, different behavior of the B Family, where the increase in temperature decreased the density. The magnetic measurements revealed the powder characteristics of a soft ferrimagnetic material. Two processes of magnetization were considered, the superparamagnetism at low temperatures (350°C) and the formation of magnetic domains at higher temperatures. Obtaining the best parameters for P and B-II magnetic ferrites at high temperatures. The sintered material at 1000°C showed a relative permeability (μ) from 50 to 800 for the A Family and from 10 to 600 for the B Family. The samples sintered at 1100°C, B Family showed a variation from 10 to 1000 and the magnetic loss (tan δ) of A and B Families, around of 1. The frequency response of the toroidal core is in the range of 0.3 kHz. Several factors contribute to the behavior of microstructure considering the quantities μ and tan δ, such as the grain size, inter-and intragranular porosity, amount of grain boundary and the aspects of the dynamics of domain walls at high frequencies.

Caracterização dos eletrocatalisadores LaMnO3, LaFeO3, LaFe0,2Mn0,8O3 E La0,5Fe0,5MnO3 preparados por autocombustão assistida por microondas para cátodos de células a combustível do tipo SOFC

Materials consisting of perovskite-type oxides (ABO3) have been developed in this work for applications in fuel cell cathodes of solid oxide type (SOFC). These ceramic materials are widely studied for this type of application because they have excellent electrical properties, conductivity and electrocatalytic. The oxides LaMnO3, LaFeO3, LaFe0.2Mn0.8O3 e La0.5Fe0.5MnO3 were synthesized by the method of microwave assisted combustion and after sintering at 800°C in order to obtain the desired phases. The powders were characterized by thermogravimetry (TG), X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM) and voltammetric analysis (cyclic voltammetry and polarization curves). The results obtained by XRF technique showed that the microwave synthesis method was effective in obtaining doping oxides with values near stoichiometric. In general, powders were obtained with particle size less than 0.5 μm, having a porous structure and uniform particle size distribution. The particles showed spherical form, irregular and crowded of varying sizes, according to the analysis of SEM. The behavior of the oxides opposite the thermal stability was monitored by thermogravimetric curves (TG), which showed low weight loss values for all samples, especially those of manganese had its structure. By means of Xray diffraction of the samples sintered at 800°C was possible to observe the formation of powders having high levels of crystallinity. Furthermore, undesirable phases such as La2O3 and MnOx were not identified in the diffractograms. These phases block the transport of oxygen ions in the electrode/electrolyte interface, affecting the electrochemical activity of the system. The voltammetric analysis of the electrocatalysts LF-800, LM-800, LF2M8-800 e L5F5M-800 revealed that these materials are excellent electrical conductors, because it increased the passage of electrical current of the working electrode significantly. Best performance for the oxygen reduction reaction was observed with iron-rich structures, considering that the materials obtained have characteristics suitable for use in fuel cell cathodes of solid oxide type

Fontes e doses de NPK em milho irrigado sob plantio direto

A utilização de fertilizantes revestidos pode proporcionar menores perdas e maior disponibilidade de nutrientes no solo, passíveis de absorção pelas plantas, tendo em vista a liberação gradativa dos nutrientes. O objetivo deste trabalho foi avaliar o efeito de doses e fontes de N, P e K, nos componentes de produção e na produtividade da cultura de milho irrigado no Cerrado. O delineamento experimental adotado foi o de blocos casualizados, com 4 doses em cobertura (0 kg ha-1 40 kg ha-1 80 kg ha-1e 120 kg ha-1 e 2 fontes (ureia e ureia revestida), para o N; 4 doses (0 kg ha-1 50 kg ha-1 100 kg ha-1e 150 kg ha-1 e 2 fontes (superfosfato triplo e superfosfato triplo revestido), para o P; e 4 doses (0 kg ha-1 40 kg ha-1 80 kg ha-1e 120 kg ha-1 e 2 fontes (cloreto de potássio e cloreto de potássio revestido), para o K, com 4 repetições. Os fertilizantes revestidos por polímeros (ureia, superfosfato triplo e cloreto de potássio) não foram eficientes nas condições edafoclimáticas estudadas, pois proporcionaram resultados semelhantes aos mesmos fertilizantes convencionais, para os teores foliares de N, P e K, componentes de produção e produtividade de grãos de milho irrigado. O incremento das doses de N aumentou linearmente o teor de N foliar, número de espigas por hectare e a produtividade de grãos de milho. A aplicação de doses de K2O e P2O5 não influenciou a produtividade de grãos da cultura.

Diagnóstico da exigência do cafeeiro em nitrogênio pela utilização do medidor portátil de clorofila

O nitrogênio é o elemento mais utilizado pela cultura do café e seu manejo é extremamente importante devido às perdas especialmente em épocas chuvosas. O trabalho foi desenvolvido em Argissolo Vermelho-Amarelo, na região de Sud Mennucci (SP), e teve como objetivo avaliar o efeito de diferentes doses e épocas de aplicação de nitrogênio sobre o teor de clorofila e de N nas folhas do cafeeiro, e calcular correlações com a produtividade. O delineamento experimental foi em blocos ao acaso com quatro repetições. Os tratamentos obedeceram o esquema fatorial 5 x 3, constituído pela combinação de cinco doses de N (0, 50, 150, 250 e 350 kg ha-1) aplicados na forma de uréia em três épocas de aplicação (aplicação única em dezembro; duas aplicações: parceladas em novembro e janeiro e três aplicações: parceladas em novembro, dezembro e janeiro). Avaliaram-se os teores de clorofila e nitrogênio das folhas durante a frutificação e a colheita. A concentração de clorofila correlacionou-se positivamente com o teor de nitrogênio nas folhas e a produção de grãos se ajustou a uma função quadrática com as doses de N aplicadas, na qual a dose 210 kg ha-1 promoveu a máxima produção; a estimativa do teor de clorofila foi promissora para detecção de possíveis deficiências de nitrogênio.

Recuperação do subsolo em área de empréstimo usada para construção de hidrelétrica

Áreas degradadas referem-se a ecossistemas alterados, onde perdas ou adições são as formas mais comuns de perturbações e degradações ambientais. As áreas de empréstimo em hidrelétricas podem ser consideradas áreas degradadas, pois delas foram retirados os horizontes superficiais do solo. Portanto, este trabalho teve como objetivo estudar a recuperação de atributos físicos e da matéria orgânica do subsolo de um Latossolo Vermelho distrófico, degradado pela retirada de solo para construção de usina hidrelétrica, por meio de adubação verde e aplicação de calcário e gesso. A pesquisa foi implantada em 1992 e os tratamentos constituíram-se de: testemunha (solo mobilizado e vegetação espontânea); mucuna-preta; guandu até 1994, seguido por feijão-de-porco; calcário + mucuna-preta; calcário + guandu até 1994, seguido por feijão-de-porco; calcário + gesso + mucuna-preta e calcário + gesso + guandu até 1994, seguido por feijão-de-porco. Os tratamentos foram implantados seguindo o esquema em blocos casualizados com quatro repetições. Após sete anos, em 1999, foram avaliadas a porosidade do solo, a macroporosidade, a microporosidade, a densidade do solo, matéria orgânica e a produção de massa seca da braquiária. Os tratamentos adotados estão contribuindo para a recuperação dos atributos físicos do subsolo exposto, e o tratamento com mucuna-preta, sem a correção do solo, tem se mostrado mais promissor. Os efeitos da recuperação do solo estão atingindo a profundidade de 0,00-0,10 m.

Uso de etil-trinexapac em cultivares de arroz de terras altas

O acamamento de plantas em cultivares de arroz, no momento da colheita, acarreta perdas significativas à produtividade. O uso de reguladores vegetais é uma das alternativas para reduzir o acamamento, entretanto, as informações sobre este assunto ainda são escassas. Este trabalho foi desenvolvido com o objetivo de avaliar o uso de doses de etil-trinexapac (0 g ha-1, 50 g ha-1, 100 g ha-1, 150 g ha-1 e 200 g ha-1 do i.a.), aplicadas por ocasião da diferenciação floral, em cultivares de arroz com diferentes tipos de plantas (Caiapó - tradicional; BRS Primavera e BRS Soberana - intermediário; e IAC 202 - moderno), avaliando o desenvolvimento e a produtividade de grãos. O experimento foi desenvolvido no município de Selvíria (MS), durante o ano agrícola de 2007/2008. Concluiu-se que a aplicação de 50 g ha-1, 100 g ha-1 e 150 g ha-1 de etil-trinexapac, por ocasião da diferenciação do primórdio da panícula das cultivares Caiapó, BRS Soberana e BRS Primavera, respectivamente, reduziu a altura de plantas e proporcionou ausência de acamamento; a cultivar IAC 202 dispensou o uso de regulador de crescimento, considerando-se que a mesma praticamente não apresentou acamamento; a aplicação de 50 g ha-1 e 150 g ha-1 de etil-trinexapac, por ocasião da diferenciação do primórdio da panícula, melhorou a produtividade da cultivar Caiapó e BRS Primavera, respectivamente, e a dose de 100 g ha-1 interferiu pouco na cultivar BRS Soberana.

Atividade fungitóxica de Momordica charantia L. no controle de Sclerotium rolfsii Sacc.

O fungo Sclerotium rolfsii causa grandes perdas em algumas culturas econômicas. Por produzir estruturas de resistência (escleródios), este fungo é de difícil controle. Há escassez de novos ingredientes ativos eficientes para o controle deste patógeno. Assim, o objetivo do presente trabalho foi verificar se existe atividade fungitóxica na planta Momordica charantia (melão-de-sãocaetano), com potencial futuro para ser estudado no controle de S. rolfsii. Para isso, dois ensaios foram realizados, um in vitro (laboratório) e outro in vivo (câmara de crescimento). em in vitro, escleródios do patógeno ficaram em contato com extratos hidroetanólico e aquoso de folhas e ramos de M. charantia e sem extrato por 7, 14, 21 e 28 dias. A sobrevivência dos escleródios foi avaliada em meio de cultura específico, após cada tempo. em in vivo, testou-se a ação dos mesmos extratos de maneira preventiva e curativa (aplicação aos 6 e 3 dias antes do plantio; no dia do plantio; e aos 3 e 6 dias após o plantio) e no tratamento de semente, no patossistema feijoeiro cv. Carioquinha versus S. rolfsii. A eficiência da ação dos extratos foi avaliada por meio da severidade da doença. Os extratos hidroetanólico e aquoso, in vitro, de forma semelhante, controlaram 100% os escleródios, num período de 0 a 7 dias. No ensaio in vivo, o extrato hidroetanólico, aplicado tanto em 6 ou 3 dias, antes do plantio, de forma preventiva, diminuiu a severidade da doença em 74%. Há atividade fungitóxica na parte aérea da planta de melão-de-são-caetano, com potencial futuro de estudo para controlar S. rolfsii, preferencialmente, de maneira preventiva.

Impacto da cárie precoce severa na infância na qualidade de vida relacionada à saúde bucal de pré-escolares sob privação social

Early childhood caries, especially in its severe form, which is characterized by an acute and aggressive nature, can have negative impacts on thequality of life of a child, due to effects such as difficulty in chewing, decreased appetite, weight loss, insomnia, changes in behavior and a decreased performance in school, among others. Moreover, the quality of life of the child`s family can also be affected, as the pain and discomfort caused by this type of caries result in loss of working days of parents, spending on dental treatments, changes in sleep patterns and stress. The aim of this study was to evaluate the impact of severe early childhood caries in the Oral Health-Related Quality of Life (OHRQoL) of public daycares`s preschool children through the Escala de Impacto da Saúde Bucal na Primeira Infância, a Brazilian version of the Early Childhood Oral Health Impact Scale (ECOHIS). A single calibrated examiner (kappa=1.0) evaluated, through the dmfs index, the oral health of 116 children aged between 3 and 5, which were included in one of three study groups: "caries-free", "not-severe early childhood caries" and "severe early childhood caries". The parents responded to ECOHIS, to assess their perception regarding the OHRQoL of their children, and a questionnaire on socioeconomic conditions. The OHRQoL was measured through the total scores and domains of ECOHIS. Descriptive analysis, Mann-Whitney test, Kruskal-Wallis test, chi-square test and Poisson multiple regression with robust variance were used. Among the children observed, 38.8% were caries-free, 27.6% showed not-severe early childhood caries and 33.6% showed severe early childhood caries. Regarding the total score of ECOHIS, severe early childhood caries had a greater negative impact on OHRQoL, compared to caries-free and not-severe early childhood caries groups (p <0.001). Regarding the child subscale, there was significant difference between the "severe early childhood caries" group and the other groups in all domains, except for theone of self-image / social interaction. In the family subscale domains, there was statistical significance between the severe early childhood caries and the caries-free groups in all domains (p <0.001), whereas between the "severe early childhood caries and not-severe early childhood caries groups there was a statistically significant difference only in the domain of parental anguish (p <0.001). Multivariate analysis showed that early childhood caries and the parent`s age were significantly associated to OHRQoL (p <0.05), independently of the other variables in the model. The presence of severe early childhood caries resulted in greater negative impact on OHRQoL (AdjPR= 6.016; 95%CI = 3.12 11.56; p<0.001), while older parents reported better OHRQoL (AdjPR = 0.603; 95%CI = 0.428 - 0.850; p = 0.004). The presence of severe early childhood caries had a negative impact on OHRQoL of preschool children and their families.

Fontes e doses de adubação nitrogenada na atividade microbiana e fertilidade do solo cultivado com Brachiaria brizantha

As pastagens geralmente perdem seu potencial produtivo e vigor de rebrota nos primeiros anos, frequentemente associada à falta de adubação nitrogenada. O objetivo deste foi verificar o efeito de fontes e doses de adubação nitrogenada na atividade microbiana (carbono da biomassa microbiana e carbono do CO2 liberado) e na fertilidade do solo cultivado com Brachiaria brizantha cv. Xaraés. O delineamento experimental foi em blocos casualizados, em arranjo fatorial 3 x 4, envolvendo três fontes de nitrogênio (uréia, sulfato de amônio e Ajifer-L40) e quatro doses de nitrogênio (0, 100, 200 e 400 kg ha-1), nas profundidades 0 - 0,10 e 0,10 - 0,20 m, com três repetições. O aumento nas doses de nitrogênio, na camada 0,0 a 0,10 m de profundidade, reduziu os valores de pH, MO, K+, Ca2+, Mg2+, SB e V%. O Ajifer e a uréia elevaram os valores de Ca2+ na camada 0,10 - 0,20 m, e as doses de 100 e 200 kg ha-1 aumentaram os valores de Mg2+ e SB. em doses elevadas o sulfato de amônio acidificou o solo. A perda de carbono pela elevada atividade microbiana pode estar relacionado ao estresse metabólico devido à acidificação do solo. A aplicação de 100 kg ha-1 de nitrogênio acarretou as menores perdas de carbono pela atividade microbiana.

O cuidador familiar do idoso com alzheimer: percepções e sentimentos

The Brazilian Constitution maintains that care for elderly people is a responsibility shared by the state, the family and the society. The politics for the elderly corroborate this understanding and treats home as a privileged place for elderly care taking. This determines the participation of the familiar as a caregiver, but highlights the lack of strategic assistance for the needs of the relative caregiver who feels helplessly and unattended in their responsibility for elderly homecare. In recent years , despite the recently pursuit for health and life quality, there is an increasing incidence of elderly patients with dementia diseases that lead to disability, the most common among then is the Alzheimer´s disease. This disease affects seriously and irreversibly cognition, memory and independence of the elderly, making it dependent on others to perform basic activities of daily life, for all his life. The present study aims to evaluate the perceptions and feelings of family caregivers of elders with Alzheimer on the role of caregiver. This is a qualitative study conducted with family caregivers of seniors with Alzheimer´s, caregivers linked to the group of the Specialized Care Center of the Elderly´s Health, located in Natal / RN. Through semi-structured interview research sought to investigate the perceptions of family caregivers on the role of caregiver, the feelings and the changes in the caregiver´s life since they assumed this role. The data were organized into categories and units of semantic analysis and analyzed using thematic content analysis by Bardin. The reports originated three categories: the perception of the role of caregiver, feelings related to the caregving and consequences of the caregiver role. Perceptions of caregivers of elderly from the requirement of dedication to the care generates losses in personal and professional life for the familiar who assumes this responsibility. The lack of family and social support, aggravates the burden of care for the dependent elderly. Public health politics for the elderly recognize the importance and needs of family caregivers, but not enough to provide support and meet the needs and assist them in supporting their limitations. The research results show the urgent need to take measures to assist the caregivers of seniors with Alzheimer, recognizing them as an action of promotion quality of life and health of the elderly and protection the health of the caregiver

Produtividade de feijoeiro de inverno submetido à dessecação com paraquat na pré-colheita

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A Central Única dos Trabalhadores (CUT) no embate das contrarreformas da previdência social: contraposição ou consenso?

The provident rights were results of intense fights in between the capital and work, claiming the interventions of the state for the creation of an ample social protection system. In Brazil the law, Providence Social mark, dated 1923, from then on, the advances and extensions were many, of this diverse categories of politics. Mean while, in the 1990 s, the Brazilian government adopted the examples of other developed countries, the new pattern that hinted the realization of substantial changes on the states purpose, the reached rights and the proper organization of working classes. For the Social Providence, the principal loses turned out in 1998 and 2003; respectively in FHC governments and Lula, with the realization of two counter reforms that restricted the provident rights and motivated the privatization of public providence. In the scenery, the CUT, one of the representative organizations from working classes, founded in 1983, that has always itself with changed direction, from fighting to negotiating. This inflection determined the proposition of the center before the offers of the counter reforms, of Social Providence. The present work has the objective to analyze the social politic content of the fights from Brazilian union movement in the period of the conquests and disassembled rights and, to analyze the proposition, acting and offers from CUT in the counter reform period from Providence in the Government FHC and Lula. To perform this study beyond the essential bibliographical revision to found and deepen the subject, we use, the documental search through the internet pages, resolutions, informations and others publications from CUT. Using CUT in the governments worked in an elegant way, the FHC government against-reforms, showed itself through diverse actions, even though they didn t have homogeneous inside, contrary the neoliberalists politicians from this government, also the offers and precaution changers. While during the reign of Lula it shoved itself priority negociative and propositive