Relatório de estágio no Centro de Arbitragem Comercial da Câmara de Comércio e Indústria Portuguesa

This report is the outcome of an internship that took place in Centro de Arbitragem Comercial da Câmara de Comércio e Indústria Portuguesa and its completion is an essential part of the path towards obtaining the Master’s Degree in Faculdade de Direito da Universidade Nova de Lisboa. This report has been structured in two stages – firstly, the presentation of the Centro de Arbitragem Comercial, focusing on its field of expertise, organic structure, principles and advantages. Then, the description of the activities developed within the Secretariat over the several stages of the arbitration procedure – since the reception of the arbitration requirement in institutional proceedings, terms of reference in ad hoc procedures, through the monitoring of the arbitral tribunal sessions (preliminary hearings, submission of evidence and final allegations) and the notification of the arbitration award. The second stage of this report is related to the description of the functions and powers of the President of Centro de Arbitragem Comercial. Firstly, it defines those powers by analyzing the statutes and rules of proceedings of the Centro de Arbitragem, drawing comparisons between the above mention and the rules of proceedings of others arbitral institutional centres, some of them are international references. The report assesses and describes the presidential powers, such as: configuration and composition of the arbitral tribunal (including arbitrator’s replacements, excuses and refusals); deadline extensions; determination of procedural rules and decision-making on any procedural incidents which arise before the constitution of the arbitral tribunal; definition of arbitration costs and fees; joinder of parties and consolidation of proceedings admission; and appointment of an emergency arbitrator. Lastly, this report analyzes some decisions delivered by the President in the respective institutional procedures which took place in the Centre.

Market risk charge of the trading book: a comparison of the Basel II and Basel III

This paper aims to investigate if the market capital charge of the trading book increased in Basel III compared to Basel II. I showed that the capital charge rises by 232% and 182% under the standardized and internal model, respectively. The varying liquidity horizons, the calibration to a stress period, the introduction of credit spread risk, the restrictions on correlations across risk categories and the incremental default charge boost Basel III requirements. Nevertheless, the impact of Expected shortfall at 97.5% is low and long term shocks decrease the charge. The standardized approach presents advantages and disadvantages relative to internal models.

Wealth Management in Africa: The Cape Verde Opportunity

This work project consists of a comprehensive study of the possibility of opening a Wealth Management (WM) firm located in Cape Verde (CV), and was made at the request of NovoBanco’s Research Sectorial team. WM is a growing industry that consists in the set of financial services provided to wealthy clients. After taking into account the expected industry growth of the Sub-Saharan region, the preferences of the African wealthy, the current industry structure, and the advantages and disadvantages of locating a WM business in CV, it is concluded that a business opportunity exists. The reasons for thus, along with relevant recommendations, including which services a new business should offer and whom to target specifically, are presented in the final section.

Zon-Optimus merger: Case study

The present Work Project was performed as a Case Study, analysing the merger between Zon, a leading Portuguese Pay TV operator and Optimus, the third largest mobile company in Portugal. The Case Study was developed with the purpose of understanding the value creation of the Zon-Optimus merger, being analysed the: (i) industry trends, (ii) parties’ contribution, (iii) pre-merger events, (iv) merger rationale, (v) deal structure and valuation, (vi) competition authority decision and (vii) competitive advantages and future strategy. Was also attached a Teaching Note where synergies, implied valuations, exchange ratios, shareholder agreements, swot analysis, among others, were duly analysed.

Infraventus-internationalizing a renewables business to Kenya

Infraventus – Internationalizing a Renewables Business to Kenya Infraventus is a renewable energy development company, with a consolidated experience, since 1988, in developing, constructing and operating projects mainly in Portugal, but also in other countries: Spain, Poland, France, Australia, Finland and Panama, and is now regarding Kenya as a possible destiny. Kenya is the biggest economy of East Africa, with a growing GDP around 5% and a low level of electric grid coverage thru its territory, 33% of national access to electricity. Kenya energy policy is intended to promote the investment in renewables; wind and sun are existing resources in good measures. Kenya is an interesting destiny to Infraventus, but has many risks. The objective of this dissertation is to evaluate the possible advantages of this investment and risks and propose recommendations about how to mitigate them considering alternative entry mode

Weight concerns scale applied to college students : Comparison between pencil-and-paper and online formats

Online data collection is becoming increasingly common and has some advantages compared to traditional paper-and-pencil formats, such as reducing loss of data, increasing participants' privacy, and decreasing the effect of social desirability. However, the validity and reliability of this administration format must be established before results can be considered acceptable. The aim of this study was to evaluate the validity, reliability, and equivalence of paper-and-pencil and online versions of the Weight Concerns Scale (WCS) when applied to Brazilian university students. A crossover design was used, and the Portuguese version of the WCS (in both paper-and-pencil and online formats) was completed by 100 college students. The results indicated adequate fit in both formats. The simultaneous fit of data for both groups was excellent, with strong invariance between models. Adequate convergent validity, internal consistency, and mean score equivalence of the WCS in both formats were observed. Thus, the WCS presented adequate reliability and validity in both administration formats, with equivalence/stability between answers.

The effectiveness of supply chain management on firm's performance: A comparative case study

The purpose of the paper is to investigate the effectiveness of supply chain management (SCM) practices to increase a company’s performance based on a cross-border and cross-sector analysis. The paper follows a comparative case study approach which was achieved by interviewing supply chain management experts of three companies operating in different industries and positions in a supply chain. Practices that were mutually applied by the firms and their contribution to achieve quality, economic, cost, and time advantages were analyzed. The paper revealed practices, which contribute the most to increase specific performance areas.

EDP - A new estimation algorithm

The aim of this work project is to analyze the current algorithm used by EDP to estimate their clients’ electrical energy consumptions, create a new algorithm and compare the advantages and disadvantages of both. This new algorithm is different from the current one as it incorporates some effects from temperature variations. The results of the comparison show that this new algorithm with temperature variables performed better than the same algorithm without temperature variables, although there is still potential for further improvements of the current algorithm, if the prediction model is estimated using a sample of daily data, which is the case of the current EDP algorithm.

Antioxidant extraction process for Andean Oca by a photodiode array detector using response surface methodology

Application of Experimental Design techniques has proven to be essential in various research fields, due to its statistical capability of processing the effect of interactions among independent variables, known as factors, in a system’s response. Advantages of this methodology can be summarized in more resource and time efficient experimentations while providing more accurate results. This research emphasizes the quantification of 4 antioxidants extraction, at two different concentration, prepared according to an experimental procedure and measured by a Photodiode Array Detector. Experimental planning was made following a Central Composite Design, which is a type of DoE that allows to consider the quadratic component in Response Surfaces, a component that includes pure curvature studies on the model produced. This work was executed with the intention of analyzing responses, peak areas obtained from chromatograms plotted by the Detector’s system, and comprehending if the factors considered – acquired from an extensive literary review – produced the expected effect in response. Completion of this work will allow to take conclusions regarding what factors should be considered for the optimization studies of antioxidants extraction in a Oca (Oxalis tuberosa) matrix.

Biomimetic mineralization: encapsulation in calcium carbonate shells

Calcium carbonate biomineralization is a self-assembly process that has been studied to be applied in the biomedical field to encapsulate biomolecules. Advantages of engineering mineral capsules include improved drug loading efficiencies and protection against external environment. However, common production methods result in heterogeneous capsules and subject biomolecules to heat and vibration which cause irreversible damage. To overcome these issues, a microfluidic device was designed, manufactured and tested in terms of selectivity for water and oil to produce a W/O/W emulsion. During the development of this work there was one critical challenge: the selective functionalization in closed microfluidic channels. Wet chemical oxidation of PDMS with 1M NaOH, confirmed by FTIR, followed by adsorption of polyelectrolytes - PDADMAC/PSS - confirmed by UV-Vis and AFM results, render the surface of PDMS hydrophilic. UV-Vis spectroscopy also confirmed that this modification did not affect PDMS optical properties, making possible to monitor fluids and droplets. More important, with this approach PDMS remains hydrophilic over time. However, due to equipment constrains selectivity in microchannels was not achieved. Therefore, emulsion studies took place with conventional methods. Several systems were tried, with promising results achieved with CaCO3 in-situ precipitation, without the use of polymers or magnesium. This mineral stabilizes oil droplets in water, but not in air due to incomplete capsule formation.

As forças de tipo gendarmerie e as operações/missões de gestão de crises da União Europeia

The European Union has taken in recent years an increasingly important role in ensuring peace and stability in the international community, and the security and defence policy of the Union has become synonymous with crisis management. The Union has addressed the issue of crisis management through two sources: the military side and the civilian side, which consists in carrying out numerous crisis management operations and missions. This study discusses the role of the European Union in conducting crisis management operations and missions and how the gendarmerie forces contribute to the success of the same. It will discuss the evolution of the European Union's security policy and the concept of crisis management, and seek to demonstrate the added value of the commitment of gendarmerie forces in operations and missions of crisis management, particularly with regard to employment of the European Gendarmerie Force. On the other hand, it will study the planning process for crisis management of the European Union, featuring the entities and agencies involved in it, and presenting the products that result from this same process. The use of Gendarmerie forces in crisis management operations and missions has significant advantages. Its use is recommended to post - conflict scenarios, in complementarity with the armed forces, in order to overcome the "security gap" that mediates the transition from the state of conflict for the period of peace and reconstruction. Gendarmerie forces can also be engaged both in military crisis management operations and civilian crisis management missions.

Helicobacter pylori genotyping from positive clotests in patients with duodenal ulcer

Even though the seroprevalence of H. pylori may be high in the normal population, a minority develops peptic ulcer. Colonization of the gastric mucosa by more pathogenic vacA strains of H. pylori seems to be associated with enhanced gastric inflammation and duodenal ulcer. H. pylori genotyping from positive CLOtests was developed to determine the vacA genotypes and cagA status in 40 duodenal ulcer patients and for routine use. The pathogenic s1b/ m1/ cagA genotype was the most frequently occurring strain (17/42.5%); only two (5%) patients presented the s2/ m2 genotype, the less virulent strain. Multiple strains were also detected in 17 (42.5%) patients. Multiple strains of H. pylori colonizing the human stomach have been underestimated, because genotyping has been performed from cultures of H. pylori. We concluded that genotyping of H. pylori from a positive CLOtest had the advantages of reducing the number of biopsies taken during endoscopy, eliminating the step of culturing H. pylori, and assuring the presence of H. pylori in the specimen being processed.

Geopolymers as infill material for conservation of azulejos

The restoration materials currently used to fill gaps in architectural historical azulejos (e.g. lime or organic resin pastes) usually show serious drawbacks in terms of compatibility, effectiveness and durability. The existing solutions do not fully protect azulejos in outdoor conditions and frequently result in further deterioration. Geopolymers can be a potential solution for azulejo lacunae infill given the chemical-mineralogical similitude to the ceramic body, and also the durability and versatile range of physical properties that can be obtained through the manipulation of their formulation and curing conditions. This work presents and discusses the viability of the use of geopolymeric pastes to fill lacunae in azulejos or to act as “cold” cast ceramic tile surrogates reproducing missing azulejo fragments. The formulation of geopolymers, namely the type of activators, the aluminosilicate source, the amount of water (to meet adequate workability requirements) and curing conditions were studied. The need for post-curing desalination was also considered envisaging their application in the restoration of outdoor architectural historical azulejos frequently exposed to adverse environmental conditions. The possible advantages and disadvantages of the use of geopolymers in the conservation of azulejos are also discussed. Several techniques were used to study the chemical and physical behavior of geopolymers, namely FT-IR, XRD, MIP, SEM-EDS, WDXRF, electrical conductivity, open porosity, bending strength, adhesion strength, water vapour permeability, thermal expansion and hydric expansion. The results indicate that geopolymers are a promising material for restoration of azulejos, exhibiting some properties, such as adhesion to the ceramic substrate, higher than inorganic materials used nowadays, such as aerial lime based pastes.

Risk of employing an evolvable production system

Nowadays manufacturing companies are facing a more challenging environment due to the unpredictability of the markets in order to survive. Enterprises need to keep innovating and deliver products with new internal or external characteristics. There are strategies and solutions, to different organisational level from strategic to operational, when technology is growing faster in operational level, more specifically in manufacturing system. This means that companies have to deal with the changes of the emergent manufacturing systems while it can be expensive and not easy to be implement. An agile manufacturing system can help to cope with the markets changeability. Evolvable Production Systems (EPS) is an emergent paradigm which aims to bring new solutions to deal with changeability. The proposed paradigm is characterised by modularity and intends to introduce high flexibility and dynamism at shop floor level through the use of the evolution of new computational devices and technology. This new approach brings to enterprises the ability to plug and unplug new devices and allowing fast reformulation of the production line without reprogramming. There is no doubt about the advantages and benefits of this emerging technology but the feasibility and applicability is still under questioned. Most researches in this area are focused on technical side, explaining the advantages of those systems while there are no sufficient works discussing the implementation risks from different perspective, including business owner. The main objective of this work is to propose a methodology and model to identify, classify and measure potential risk associated with an implementation of this emergent paradigm. To quantify the proposed comprehensive risk model, an Intelligent Decision system is developed employing Fuzzy Inference System to deal with the knowledge of experts, as there are no historical data and sufficient research on this area. The result can be the vulnerability assessment of implementing EPS technology in manufacturing companies when the focus is more on SMEs. The present dissertation used the experts’ knowledge and experiences, who were involved in FP7 project IDEAS, which is one of the leading projects in this area.

Microlaparoscopy in gynecology: analysis of 16 cases and review of literature

Microlaparoscopy represents the development of endoscopic surgery towards a minimally invasive surgical procedure. The advantages include fewer surgical complications, faster return to daily activities, more comfortable postoperative recovery, and satisfactory aesthetic results. The possibility of performing surgery under sedation may result in shorter hospitalization, lower hospital costs, and easier anesthetic procedures. The authors report their preliminary experience with the use of microlaparoscopy, using optics and 2mm instruments, as well as a review of the literature since the introduction of this new technique. The report of these 16 cases demonstrates that microlaparoscopy is a feasible technique with satisfactory results. On the other hand, this new technique requires precise indications and a training period for the development of the skills necessary for performing these surgeries.