Inhibition Effect of 2,3,5-Triphenyl-2H-tetrazolium Chloride and 2,4,6-Tri(2-pyridyl)-s-triazine on the Corrosion of Mild Steel in 1 mol/L HCl and Mechanism Study (II)

The inhibitory effect of 2,3,5-triphenyl-2H-tetrazolium chloride (TTC) and 2,4,6-tri(2-pyridyl)-s-triazine (TPT) molecules on the corrosion of mild steel in 1 mol/L HCl and microcosmic inhibitory mechanism were investigated by X-ray photoelectron spectroscopy and ellipsometry. XPS results showed that C Is and N Is peaks of TTC, C Is and N Is peaks of TPT and their integral areas were obtained, which suggested the layer of the inhibitors (TTC or TPT) should have effectively protected the mild steel surface from the corrosion; and the depression from the inhibitors for the corrosion of mild steel surface was studied using ellipsometry combined with potentiodynamic polarization and the phasic difference was gained, which displayed the inhibitory coverage of the inhibitors formed.

2,3,5-triphenyl-2H-tetrazolium chloride and 2,4,6-tri(2-pyridyl)-s-triazine on the corrosion of mild steel in HCl

Electrochemical measurement, quantum chemical method, and scanning electron microscopy (SEM) were performed to investigate the inhibitive effect of 2,3,5-triphenyl-2H-tetrazolium chloride (TTC) and 2,4,6-tri(2-pyridyl)-s-triazine(TPT) on the corrosion of mild steel in 1mol.L-1 HCl at room temperature. Impedance spectroscopy measurement showed that the polarization resistance increased and that double layer capacitance decreased with the increase in the inhibitive concentration, and the results of potentiodynamic polarization showed that the inhibitors suppressed both cathodic and anodic processes of steel corrosion without change in the mechanism. Higher the orbital density distribution strength of the lowest unoccupied molecular orbital, higher is the molecule dipole, and lower energy gap between the energy of the highest occupied molecular orbital and the energy of the lowest unoccupied molecular orbital resulted in higher inhibitory efficiency. The results of SEM analysis showed that the metal was protected from aggressive corrosion by the addition of TTC and TPT.

Unprecedented 5,5-connected (4(7)center dot 6(3)) (4(8)center dot 6(2)) structural topology: A lead biphosphonate with double layered structure

A new lead(II) phosphonate, Pb[(PO3)(2)C(OH)CH3]center dot H2O (1) was hydrothermally synthesized and characterized by IR, elemental analysis, UV, TGA, SEM, and single crystal X-ray diffraction analysis. X-ray crystallographic study showed that complex 1 has a two-dimensional double layered hybrid structure containing interconnected 4- and 12-membered rings and shows an unusual (5,5)-connected (4(7) . 6(3)) (4(8) .6(2)) topology. (C) 2008 Elsevier B.V. All rights reserved.

HPLC测定四川及青海地区獐牙菜植物中6种主要成分的含量

目的:建立反相高效液相色谱法同时测定四川及青海地区部分獐牙菜中獐牙菜苦苷、龙胆苦苷、芒果苷、当药醇苷、异荭草苷、1,8-二羟基-3-甲氧基(口山)酮的含量.方法:采用RP-HPLC,使用Kromasil C_(18)(4.6 mm×250mm,5 μm)柱;流动相甲醇-水(含0.02%磷酸);梯度洗脱程序为0～50 min,甲醇的体积分数(下同)由20%上升至80%;50～55 min由80%增至100%,55～60 min为100%,流速1 mL•min~(-1),检测波长254 nm;柱温35 ℃.结果:6种成分均达到基线分离,线性良好.结论:该方法快速、准确、重复性好,为该类药材的入药提供了理论依据.

栽培川西獐牙菜中6种药用成分的测定方法和动态积累研究

采用反相高效液相色谱法对川西獐牙菜中6种药用成分不同生长期的含量进行了测定.色谱柱为Kromasil C18(250 mm×4.60 mm,5 μm),流动相为甲醇-0.02%的磷酸水溶液,检测波长260 nm.该方法具有很好的线性关系和回收率.结果显示,川西獐牙菜全草的最佳采收期为9月中旬(花果期).

国产6种点地梅属植物的核型及其系统学意义

报道了点地梅属6种12个居群的染色体数目和核型。它们的染色体数目（2n）、核型公式（KF）、染色体相对长度组成（CRL）、核型不对称性系数（A. sK％）和核型类型（KT）分别为：点地梅在南京的2个居群都是2n=2x=20，KF=18m+2sm, CRL=2L+6M_2+10M_1+2S，核型KT属于1A型，但核型不对称性系数As. K％分别是55.04％和56.71％；北点地梅在内蒙古锡林郭勒和白音锡勒居群的2n=2x=20，KF分别为16m+2sm+2st+1b和16m+2sm+2st+4b，染色体相对长度组成分别是14M_2+4M_1+2S+1b和12M_2+6M_1+2S+4b，核型不对称性系数As. K％分别是57.65％和58.86％，属2A型和2B型；高原点地梅在青海玛沁县昌马河居群和兴海县温泉居群都是2n=2x=20，KF=10m+8sm+2st。但相对长度组成分别为12M_2+8M_1和4L+6M_2+6M_1+4S, As. K％分别是60.35％和62.57％，属2A型和2B型；雅江点地梅在青海玛多县巴颜喀拉山居群和大通县达坡山居群分别为2n=4x=40和20n=6x=60，KF=36m+2sm+2st和KF=46m+10sm+4st+2b, CRL=2l+20M_2+14M_1+4S和GRL=6L+30M_2+16M_1+8S+2b, As.K％分别为55.62％和58.31％，核型均属于2B；巴颜喀拉山北坡的鳞叶点地梅2n=40、60、80。西藏点地梅青湖居群中有2种细胞型：①2n=2x=24, KF=12m+6sm+6st+4b, CRL=6L+2M_2+8M_1+4S+4b, As. K％＝65.74％，核型属2B；②2n=2x=22,KF=14m+4sm(2SAT)+4st, CRL=4L+6M_2+8M_1(2SAT)+4S,As. K％=63.40％，核型也属于2B。西宁西山湾居群也有2种细胞型；①2n=3x=36, KF=36m,CRL=4L+12M_2+20M_1, As. K％=54.82％，核型属1A；②2n=3x=33,KF=33m, CRL=3L+12M_2+18M_1,As. K％=52.11％，核型属1A。点地梅属的染色体原始基数可能是x=10，在种间或种内观察到有3种核型变化：染色体非整倍性变化、多倍化和核型不对称性变化。将2倍体居群的核型和不对称性进行比较，可以看出点地梅是较对称的核型。因此，在研究的种中应是比较原始的类群。北点地梅的核型不对称性和进化程度高于点地梅而低于高原点地梅和西藏点地梅。染色体多倍化的雅江点地梅、鳞叶点地梅和西藏点地梅等在核型上也许是最进化的类群。

6-MBOA对植食性小哺乳类繁殖作用的研究进展

本文主要综述了6-MBOA 对植食性小哺乳类繁殖的作用及其信息传递的研究进展。植物组织的6-MBOA 是触发植食性小哺乳类繁殖投入时间, 调节个体繁殖性能的特定化学信号。野外和实验室的研究揭示, 植食性小哺乳类的繁殖能对植物衍生的6-MBOA 作出正的反应。在亲代母体和子代间存在6-MBOA 信息传递, 摄入6-MBOA 的母体, 能在妊娠期和哺乳期将其信息传递给子代, 子代的繁殖对母体传递的6-MBOA 信息亦能作出相应的生理反应, 其繁殖投入的时间和反应强度均依赖于母体所接受的6-MBOA , 且可超越短光照周期对子代繁殖的抑制。在变动剧烈的不可预测环境中, 兼性机会主义繁殖者, 以获得的6-MBOA 信息调整其繁殖投入。

马先蒿属6个种的核型与进化研究

分析和报道了马先蒿属（Pedicularis Linn.）分布于青藏高原东北部６个特有种的核型，并根据核型及其有关参数，分析和比较了该６种马先蒿核型的不对称性和相对进化程度。６个种的体细胞染色体数目都是２ｎ＝１６。核型分别为：绵德马先蒿P.pilostachya Maxim.，核型公式Ｋ（２ｎ）＝１６＝４ｍ＋１２ｓｍ，染色体相对长度组成２Ｌ＋６Ｍ２＋６Ｍ１＋２Ｓ，核型不对称系数Ａｓ·Ｋ＝６５．２９％，属于２Ａ型；青海马先蒿P.przewalskii Maxim.，Ｋ（２ｎ）＝１６＝８ｍ（ＳＡＴ）＋４ｓｍ＋２ｓ＋２ｔ，２Ｌ＋８Ｍ２＋２Ｍ１＋４Ｓ，Ａｓ·Ｋ＝６５．０２％，２Ｂ型；华马先蒿P.oederi Vahl.var.sinensis(Maxim.)Hurus.，K(2n)=16=12m+4sm，2L+4M2+8M1+2 S，As·K=59.89%，2B型；粗野马先蒿P.rudis Maxim.，K(2n)=16=4m+10sm+2st，4L+4M2+4M1+2 S，As·K=68.10%，2B型；甘肃马先蒿P.kansuensis Maxim. Subsp. kansuensis，K(2n)=16=6m+6sm+2st+2t，2L+6M2+6M1+2 S，As·K=68.92%，2A型；藓生马先蒿P.muscicola Maxim. K(2n)=16=8m(SAT)+8sm，2L=8M2+4M1+2S，As·K=62.64%，2B型。根据这6个种的核型和已有资料，认为该属的染色体基数x=8，极少数种有多倍体。通过对以上6种核型及进化程度的比较，该属核型变异较大，以中部着丝粒染色体为组成基础（较原始的种类，如华马先蒿和绵穗马先蒿），端部或近端部着丝粒染色体存在与否与该属内种的进化程度有关。核型不对称性所表示的进化程度似乎与花冠的演化有联系。

Theoretical study on adsorption of Na+ and Na+(H2O)(n) (n=1-6) on a clean Si(111) surface

To model the adsorption of Na+ in aqueous solution on the semiconductor surface, the interactions of Na+ and Na+(H2O)(n) (n = 1-6) with a clean Si(111) surface were investigated by using hybrid density functional theory (B3LYP) and Moller-Plesset second-order perturbation (MP2) methods. The Si(111) surface was described with Si8H12, Si16H20, and Si22H21 Cluster models. The effect of the basis set superposition error (BSSE) was taken into account by applying the counterpoise (CP) correction. The calculated results indicated that the interactions between the Na+ cation and the dangling bonds of the Si(111) surface are primarily electrostatic with partial orbital interactions. The magnitude of the binding energies depends weakly on the adsorption sites and the size of the clusters. When water molecules are present, the interaction between the Nal and Si(I 11) surfaces weakens and the binding energy has the tendency to saturate. On a Si22H21 cluster described surface, the optimized Na+-surface distance for Na+(H2O)(5) adsorbed at on-top site is 4.16 angstrom and the CP-corrected binding energy (MP2) is -35.4 kJ/mol, implying a weakly adsorption of hydrated Na+ cation on clean Si(111) surface.

一种6自由度柔索并联机器人的动力学研究

采用串联约束 /并联驱动的原理 ,通过加入约束机构 ,设计一种新型柔索驱动并联机器人。然而由于约束机构的引入 ,机器人的动力学分析变得更为复杂。在对机器人进行运动学分析的基础上 ,利用牛顿 欧拉法建立机器人动力学方程。仿真结果证明了该方法的有效性

基于3自由度并联机器人的船载炮6维运动模拟系统

本文系统基于3自由度并联机器人和3维图形仿真实现了空间6维运动的模拟，构造了一种3自由度并联机构来模拟船的3维转动，并给出了并联平台的运动学逆解，采用图形仿真虚拟作战环境，模拟船的3维移动，并分析了图形驱动原因。

叠前叠后联合反演技术及其在QHD32-6油田的应用研究

What geophysical inversion studied includes the common mathematics physical property of inversion and the constitution and appraisal method of solution in geophysics domain, i.e. using observed physical phenomenon from the earth surface to infer space changing and physical property structure of medium within the earth. Seismic inversion is a branch of geophysical inversion. The basic purpose of seismic inversion is to utilizing seismic wave propagating law in the medium underground to infer stratum structure and space distribution of physical property according to data acquisition, processing and interpretation, and then offer the vital foundation for exploratory development. Poststack inversion is convenient and swift, its acoustic impedance inversion product can reflect reservoir interior changing rule to a certain degree, but poststack data lack abundant amplitude and travel time information included in prestack data because of multiple superimpose and weaken the sensitiveness which reflecting reservoir property. Compared with poststack seismic inversion, prestack seismic inversion has better fidelity and more adequate information. Prestack seismic inversion, including waveform inversion, not only suitable for thin strata physical property inversion, it can also inverse reservoir oil-bearing ability. Prestack seismic inversion and prestack elastic impedance inversion maintain avo information, sufficiently applying seismic gathering data with different incident angle, partial angle stack, gradient and intercept seismic data cube. Prestack inversion and poststack inversion technology were studied in this dissertation. A joint inversion method which synthesize prestack elastic wave waveform inversion, prestack elastic impedance inversion and poststack inversion was proposed by making fully use of prestack inversion multiple information and relatively fast and steady characteristic of poststack inversion. Using the proposed method to extract rock physics attribute cube with clear physical significance and reflecting reservoir characterization, such as P-wave and S-wave impedance, P-wave and S-wave velocity, velocity ratio, density, Poisson ratio and Lame’s constant. Regarding loose sand reservoir in lower member of Minghuazhen formation, 32-6 south districts in Qinhuangdao,as the research object, be aimed at the different between shallow layer loose sand and deep layer tight sand, first of all, acquire physical property parameters suitable for this kind of heavy oil pool according to experimental study, establishing initial pressure and shear wave relational model; Afterwards, performing prestack elastic wave forward and inversion research, summarizing rules under the guidance of theoretical research and numerical simulation, performing elastic impedance inversion, calculating rock physics attributes; Finally, predicting sand body distribution according to rock physics parameters, and predicting favorable oil area combine well-logging materials and made good results.

鄂尔多斯盆地环县地区长6-长8沉积相及储层研究

The exploration in recent years shows that the Yanchang Formation in the southwest of Ordos Basin is of great resource potential and good exploration and exploitation prospect. In the thesis ，sedimentary source analysis，sedimentary system，sedimentary microfacies，sandstones distribution and reservoir characteristic are studied and favorable oil area are forecasted in Chang6-Chang8 of Yanchang formation in HuanXian region， by mainly study on the data of field section observation ，core observation, well logging explaination and routine microscope slice identification，scanning Electron Microscope and reservoir analysis of lithology and physical property , Under the guidance of such advanced theories and methods as sedimentology，reservoir sedimentology，lithological oil pool and so on. The stratum of Chang6-Chang8 of Yanchang formation could be divided into pieces of member following the principles that firstly contrasting the big segments, then contrasting the small segments, being controlled by cycle and consulting the thickness etc.And the characteristic of stratum are detailed discussed , respectively. Based on the source direction of the central basin, heavy and light minerals are used to analyse source direction of Chang6 and Chang8 member, in HuanXian area. Research result shows that the source of Chang6 and Chang8 member is mixed provenance,including west-south,west and east-north. By the study of rock types、 sedimentary conformation、lithology and electromotive curve combination and palaeo-biology,lake、delta and braided delta mianly developed in study area are recognized, Subaqueous distributary channels in delta front and in braided delta front, and sand body in deep-lake turbidite, are the main reservoir.forthermore,the characteristic of depositional system and sandy body in space are discussed. Applied with routine microscope slice identification, Scanning Electron Microscope, reservoir lithology and physical property analysis and other analytic machinery, Feldspar-lithic fine-sandstone and feldspar fine-sandstone are mainly sandstone of Y Chang6-Chang8 in Huanxian area, small pore and tiny pore are the main pore types, tiny throat type and micro-fine throat type are widely developed , secondary dissolution porosity, intercrystal porosity, tiny pore and micro-crack are main pore types.Intergranular porosity and dissolution porosity secondary is the main pore secondary. The dominant diagenesis types in the area are compaction, cementation, replacement and dissolution. Chlorite films cementation facies, carbonate cementation facies ,mud cementation compaction facie, compaction 、pressure solution facies are the main diagenetic facies,in which Chlorite films cementation facies is the best diagenetic facies in study area. Reservoir influence factor analysis ,rock types are the main factor forming this low-pore and low-permeability of Chang6-Chang8 member in study area,and relatively higher permeability area are cortrolled by sedimentary facies distribution, diagenesis improved reservoir physical property. According to the distributing of sedimentary micro-facies and sandy body , and the test oil, favorable region in Chang6-Chang8 are forecasted.

孤岛油田中二北区Ng3～6储层建筑结构与油水分布规律研究

The reservoir of Zhongerbei region in Gudao Oilfield is a typical fluvial facies deposit, its serious heterogeneity of the reservoir caused the distribution of remaining oil in mature reservoirs is characterized by highly scattered in the whole field, and result to declination of production, tap potential and stabilize production is more difficult. Reservoir modeling based on lay scale can not fulfill requirement. How to further studied reservoir heterogeneity within the unit and establish the finer reservoir modeling is a valid approach to oil developing. The architectural structure elements analysis is the effectively method to study reservoir heterogeneity. Utilize this method, divide the reservoirs of Gudao Oilfield into ten hierarchies. The priority studying is sixth, seven hierarchies, ie single sand layers sand bodies By the identification of sixth, seven hierarchies, subdivide the reservoir to the single genetic unit. And to subdivide by many correlation means, such as isometry and phase transition, accomplish closure and correlation of 453 wells.Connectting fluvial deposit pattern, deposition characteristic with its log, build the inverting relation between “sedimentary facies” and “electrofacies” The process emphasize genetic communication and collocation structure of genetic body in space. By detailed architecture analyses sandbodies’ structure, this paper recognize seven structure elements, such as major channel, abandoned channel, natural levee, valley flat, crevasse splay, crevasse channel and floodplain fine grain.Combination identification of architectural structure elements with facieology and study of deposition characteristic, can further knowing genesis and development of abandoned channel. It boost the accuracy to separation in blanket channel bodies distribution, and provide reference to retrieving single channel boundary. Finally, establish fine plane and section construction. On basis architectural structure map, barrier beds and interbeds isopach map and mini-structure map, considering single thin layers to be construction unit, the main layer planimetric maps have drawn and the inner oil-water boundary have revealed. All account that architectural structure elements control remaining oil distribution in layer, and develop the study on architectural structure elements to direct horizontal well is succesful.