The natural history of type II odontoid fractures in the elderly population. A retrospective study over a 14 years period.

Odontoid fractures are the most common cervical fractures in the adult population. They represent 9 to 18 % of all cervical fractures and the type II is the most common. The incidence of neurologic deficits (ND) in odontoid fractures varies between 3 to 25%. A recent study showed that patients with ND had a mortality rate increased by 4.72 times and a complication rate higher of 1.18 times. The most common complication in patients with ND was respiratory distress8. Surprisingly, although type II odontoid fractures are frequent cervical fractures, their natural history has been poorly described. Surgery for odontoid fractures is well described. However, there are so far guidelines based on class II and class III evidence only regarding indications for surgery and regarding surgical techniques. The class II guidelines recommend to consider surgical stabilization and fusion for type II odontoid in patients over 50 years of age. The class III recommendations are to first manage non-displaced odontoid type II fracture with external immobilization and that translation of 5mm or more is associated with a high rate of non- union with the conservative treatment and should be treated surgically.

Amostragem de suspensões: Emprego da técnica na análise direta de amostras

This review presents some characteristics related to slurry sampling in trace analysis in terms of its advantages, limitations and applications, as well as the latest advance in this area, such as mechanization, chemical modifiers, stabilization agents and others. The reviewed applications include foods, biological and geological materials.

Imobilização de 8-hidroxiquinoleína em sílica gel. Melhorias na tradicional rota de diazotação

Some modifications made at silanization step and the introduction of r-nitrobenzil bromide as an alternative reagent to the 8-hydroxiquinolein immobilization in silica gel were important points that brought up the reduction of synthesis time, efficency improvement of the immobilization process and better hydrolysis stabilization to the final materials. The caracterization was made by infrared spectroscopy, elementary analysis, complexing capacity and acid-base properties.

Ympäristöteknologioiden verifioinnin mahdollisuudet pilaantuneiden maiden laadukkaan käsittelyn edistämisessä

EU on käynnistämässä ympäristöteknologioiden verifiointijärjestelmää, jonka avulla voidaan tarjota käyttäjille ja sijoittajille riippumatonta tietoa innovatiivisten teknologioiden toimivuudesta ja suorituskyvystä ja parantaa niiden markkina-asemaa. Verifioinnilla tarkoitetaan kolmannen osapuolen suorittamaa prosessia tai mekanismia, jonka avulla tuotteen toiminta ja suorituskyky voidaan todentaa. Kansallinen ympäristöteknologioiden verifiointijärjestelmä on käytössä mm. Yhdysvalloissa ja Kanadassa. Euroopassa järjestelmä otettaneen käyttöön vuonna 2011–2012. Suomessa tehdään nykyisin noin 300 pilaantuneen maan puhdistushanketta koskevaa lupa- ja ilmoituspäätöstä vuosittain. Noin 85 prosentissa kohteista käytetään kunnostusmenetelmänä massanvaihtoa. Massanvaihto tulee ainakin toistaiseksi säilymään yleisimpänä kunnostusmenetelmänä, mutta mm. in situ -menetelmien käytön arvioidaan lisääntyvän. Tämän diplomityön tavoitteena oli arvioida voidaanko verifiointia hyödyntää pilaantuneiden maiden laadukkaan käsittelyn edistämisessä ja voiko verifiointi nopeuttaa innovatiivisten kunnostusmenetelmien markkinoillepääsyä. Aihetta tarkasteltiin mm. kahden erityyppisen pilaantuneen maan ja pohjaveden kunnostusmenetelmän, reaktiivisten seinämien (in situ) ja bitumistabiloinnin (ex situ) kautta. Pilaantuneiden maiden kunnostusmenetelmien toimivuus riippuu monista eri tekijöistä, joista osaa ei voida hallita tai mallintaa luotettavasti. Verifiointi soveltuukin parhaiten laitteiden tai PIMA-menetelmiä yksinkertaisempien puhdistusmenetelmien suorituskyvyn todentamiseen. Verifiointi saattaa kuitenkin hyvin toimia PIMA-kunnostuksen kohdalla esimerkiksi tiedollisena ohjauskeinona. Reaktiivisten seinämien ja bitumistabiloinnin verifioinnin työvaiheet ovat hyvin samankaltaiset, suurimpana erona seinämien kohdalla tulee kuvata myös kohde johon seinämä on asennettu. Reaktiivisten seinämien toiminta on riippuvaista monista ympäristötekijöistä, toisin kuin erillisellä laitteistolla suoritettavan bitumistabiloinnin. Tulosten perusteella voidaan yleistää, että verifiointi soveltuu paremmin ex situ -, kuin in situ -kunnostusmenetelmille.

Solubilidade do SrO em NaCl-Kcl fundido a 727ºC

The solubility product value of SrO has been found to be equal to 10-4,2 (molality scale) in molten equimolar mixture of NaCl and KCl at 727ºC, using a potentiometric method involving a calcia stabilized zirconia membrane electrode. This value, which is in a logical agreement with other alkaline-earth oxide determined solubilities, is compared to those of 10-5,8, 10-3,0 and 10-3,08 (molality scale) found in the litterature 33, 22 and 5 years ago, respectively. Such discrepencies have called the attention of the authors, their possible reasons (methodology, titrating agent) are analyzed and a theoretical discussion, for considering the authors' value as more reliable, is given in this paper.

Estudo de algumas reações oxoacidobásicas no solvente NaCl fundido entre 1100K e 1200K

Equilibrium constants (K) of some oxoacidbasic reactions in molten NaCl in the temperature range of 1100K to 1200K, have been measured potentiometrically with a calcia stabilized zirconia oxide ion (O2-) indicator electrode. In molten NaCl at 1100K the pKs values (in molality scale) for HCl/H2O and HO-/H2O are respectively 11.0 ± 0.3; 1.6 ± 0.3 and the pKs for CaO is 4.3 ± 0.3. The results have been compared with those determined previously by Combes for the molten equimolar NaCl-KCl mixture and are in good agreement with literature data and gives some qualitative explanation of the comparison of oxoacidbasic properties between molten NaCl and NaCl-KCl.

Síntese de membranas cerâmicas via método sol-gel utilizando TEOS e N,N-dimetilformamida

In this work we obtained microporous and mesoporous silica membranes by sol-gel processing. Tetraethylortosilicate (TEOS) was used as precursor. Nitric acid was used as catalyst. In order to study the affect of N,N-dimethylformamide (NDF) as drying additive, we used a molar ratio TEOS/NDF of 1/3. The performance of N,N-dimethylformamide was evaluated through monolithicity measurements. The structural evolutions occurring during the sol-gel transition and in the interconnected network of the membranes during thermal treatment were monitored by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analyses and nitrogen sorption. We noted that in the presence of N,N-dimethylformamide, polymerization goes through a temporary stabilization of oligomers. The Si-O(H) bonds are stronger and belong to a more cross-linked structure for the N,N-dimethylformamide containing sol. The membranes obtained in the presence of N,N-dimethylformamide have larger surface area and its pore structure is in the range of mesoporous. The membranes obtained without additive have pore structure in the range of microporous.

Catalytic gasification of glycerol in supercritical water

The conversion of glycerol in supercritical water (SCW) was studied at 510-550 °C and a pressure of 350 bars using both a bed of inert and non-porous ZrO2 particles (hydrothermal experiments), and a bed of a 1% Ru/ZrO2 catalyst. Experiments were conducted with a glycerol concentration of 5 wt% in a continuous isothermal fixed-bed reactor at a residence time between 2 and 10 s. Hydrothermolysis of glycerol formed water-soluble products such as acetaldehyde, acetic acid, hydroxyacetone and acrolein, and gases like H2, CO and CO2. The catalyst enhanced the formation of acetic acid, inhibited the formation of acrolein, and promoted gasification of the glycerol decomposition products. Hydrogen and carbon oxides were the main gases produced in the catalytic experiments, with minor amounts of methane and ethylene. Complete glycerol conversion was achieved at a residence time of 8.5 s at 510 °C, and at around 5 s at 550 °C with the 1 wt% Ru/ZrO2 catalyst. The catalyst was not active enough to achieve complete gasification since high yields of primary products like acetic acid and acetaldehyde were still present. Carbon balances were between 80 and 60% in the catalytic experiments, decreasing continuously as the residence time was increased. This was attributed partially to the formation of methanol and acetaldehyde, which were not recovered and analyzed efficiently in our set-up, but also to the formation of carbon deposits. Carbon deposition was not observed on the catalyst particles but on the surface of the inert zirconia particles, especially at high residence time. This was related to the higher concentration of acetic acid and other acidic species in the catalytic experiments, which may polymerize to form tar-like carbon precursors. Because of carbon deposition, hydrogen yields were significantly lower than expected; for instance at 550 °C the hydrogen yield potential was only 50% of the stoichiometric value.

Use of the EPR technique to determine thermal stability of some humified organic substances found in soil organic-mineral fractions

In this work, using the EPR spectroscopy, we analysed the thermal stability of some organic-mineral compounds found in a Gleysoil from Rio Janeiro. It was observed a complete disappearance of the EPR signal around 600 °C for the < 2 µm fraction and a residual EPR signal of semiquinone free radical for the 2-20 µm and 20-53 µm fractions at the same temperature. Also, the experiments showed that the 2-20 µm fraction had a larger concentration of semiquinone free radical per g of carbon and a smaller line width indicated a larger humification of this fraction. This is an evidence that the soil organic matter of this fraction (2-20 µm) is more stable than the other ones.

Novos produtos naturais capazes de atuar na estabilização de microtúbulos, um importante alvo no combate ao câncer

Microtubules are involved in many aspects of cellular biology and represent an important target of anticancer chemotherapeutics. In the past five years, novel natural products such as epothilones, discodermolide, sarcodictyin, eleutherobin, and laulimalide, all of which have biological activities similar to those of paclitaxel (Taxolâ), have been discovered. Taxolâ is an important antitumor drug approved by the FDA for the treatment of ovarian, breast and non-small-cell lung carcinomas and became the first natural product described that stabilized microtubules avoiding the cellular replication. The present article reports new natural products that are able to act on the stabilization of microtubules.

Degradação e estabilização do diclofenaco em nanocápsulas poliméricas

The parameters which affect the degradation and stabilization of diclofenac in suspensions of nanocapsules and of the corresponding spray-dried powders were investigated. Formulations were subjected to 14 months of storage at room temperature. In addition, a study of the degradation of diclofenac was carried out by exposing the formulations or mixtures (drug and adjuvants) to UVC wavelengths. The presence of Epikuron 170® in a concentration higher than 3.06 mg/mL stabilizes the drug, avoiding its reduction or degradation. The degradation products were isolated, analyzed by gas chromatography-mass spectrometry, and identified as 2-(2',6'-dichlorophenyl)aminobenzyl alcohol and N-(2',6'-dichlorophenyl)anthranilylaldehyde.

Estabilização de solo contaminado com zinco usando zeólitas sintetizadas a partir de cinzas de carvão

The effect of synthetic zeolites on stabilizing Zn-contaminated soil using 0.01 mol L-1 CaCl2 leaching solution in batch experiments was investigated. The zeolites were synthesized from coal ash by hydrothermal treatment with alkaline solution. The additive enhanced the sorption capacity of the soil and reduced leaching. Zinc leaching was reduced by more than 80% using a minimum of 10% additive. The higher cation exchange capacity of the zeolite/soil mixtures and higher pH were responsible for stabilizing Zn in soil. The poly(2-aminobenzenesulfonic acid)-coated mercury thin-film electrode was used for the determination of zinc.

Ação de colorantes na degradação e estabilização de polímeros

Dyes and pigments are additives used in polymers to improve mainly the aesthetic properties of the material. However, the incorporation of these additives can directly affect polymer stability. The colorants can drastically decrease the lifetime and the performance of the material or can act as a stabilizer, improving significantly the stability of the polymer against degradation. Interaction between colorants and polymers is the cause of the stability changes. Some mechanisms are proposed to explain the action of colorants on polymers. However it is difficult to foresee this action without experiments. This work reviews the main mechanisms involved in the degradation and stabilization of polymers containing colorants.

O pKa de indicadores ácido-base e os efeitos coloidais

An experiment is proposed that can be included in undergraduate courses of chemistry. The subject is the acidity of organic compounds, which are employed as pH indicators, particularly in acid-base titrations. The indicators used are methyl orange, bromophenol blue and bromocresol green in aqueous medium. The influence of colloidal systems on the equilibrium is evaluated by the pKa. The colloids employed are surfactants like sodium dodecyl sulfate, cetyl-trimethylammonium bromide and a polymeric non-ionic F127 (pluronics). The effect of stabilization promoted by the system on the acidic or basic structureof the indicator establishes the action mechanism of the colloid on the pKa values.

The role of aromaticity in determining the molecular structure and reactivity of (endohedral metallo)fullerenes

The encapsulation of metal clusters in endohedral metallofullerenes (EMFs) takes place in cages that in most cases are far from being the most stable isomer in the corresponding hollow fullerenes. There exist several possible explanations for the choice of the hosting cages in EMFs, although the final reasons are actually not totally well understood. Moreover, the reactivity and regioselectivity of (endohedral metallo)fullerenes have in the past decade been shown to be generally dependent on a number of factors, such as the size of the fullerene cage, the type of cluster that is being encapsulated, and the number of electrons that are transferred formally from the cluster to the fullerene cage. Different rationalizations of the observed trends had been proposed, based on bond lengths, pyramidalization angles, shape and energies of (un)occupied orbitals, deformation energies of the cages, or separation distances between the pentagon rings. Recently, in our group we proposed that the quest for the maximum aromaticity (maximum aromaticity criterion) determines the most suitable hosting carbon cage for a given metallic cluster (i.e. EMF stabilization), including those cases where the IPR rule is not fulfilled. Moreover, we suggested that local aromaticity plays a determining role in the reactivity of EMFs, which can be used as a criterion for understanding and predicting the regioselectivity of different reactions such as Diels-Alder cycloadditions or Bingel-Hirsch reactions. This review highlights different aspects of the aromaticity of fullerenes and EMFs, starting from how this can be measured and ending by how it can be used to rationalize and predict their molecular structure and reactivity