Electrochemical impedance spectroscopy analysis for oxygen reduction reaction in 3.5% NaCl solution

The electrochemical impedance spectroscopy (EIS) at different potentials has been used to study the oxygen reduction reaction (ORR) in 3.5% NaCl solution on glassy carbon (GC) electrode in this work. Results show that ORR consists of three two-electron reaction steps and both superoxide ion (O-2(-)) and hydrogen peroxide (H2O2), which are produced by ORR, obstruct the diffusion of oxygen to the surface of the electrode and make the EIS results change into a transmissive finite diffusion process with the real part contraction and a reflective finite diffusion process from a semi-infinite diffusion process. The values of electron transfer resistance (R-t) and diffusion resistance (R-d) were calculated from EIS. O-2(-) influenced strongly on the Rt values and induced a maximum at -0.45 V.

Effect of Process Conditions on Microstructure and Corrosion Resistance of Cold-Sprayed Ti Coatings

Ti and Ti alloys can be applied to steels as a protective coating in view of its excellent resistance to corrosive environment. Cold spraying, as a new coating technique, has potential advantages in fabrication of Ti coating in comparison with conventional thermal spraying techniques. In this study, Ti coatings were prepared on carbon steel substrates by cold spraying via controlling the process conditions. The microstructure of coatings was observed by SEM. The porosity of coatings was estimated by image analysis and the bond strength was tested for comparison of the process conditions. Potentiodynamic polarization and open-circuit potential (OCP) measurements were performed to understand the corrosion behavior of the coatings. The SEM examination shows that the coatings become more compact with the increases of pressure and temperature of driving gas. The potentiodynamic polarization curves indicate that the coating which has lower porosity has lower corrosion current. The polarization and OCP measurement reveal that cold-sprayed Ti coating can provide favorable protection to carbon steel substrate. The polishing treatment of coating surface polishes the rough outer layer including the small pores as well as decreases the actual surface area of the coating, leading to the considerable improvement of corrosion resistance.

Three phases of dark-recovery course from photoinhibition resolved by the chlorophyll fluorescence analysis in soybean leaves under field conditions

The chlorophyll fluorescence in soybean leaves was observed by a portable fluorometer CF-1000 under field conditions. On clear days, F-0 increased while F, and F-v/F-m decreased gradually in the morning. At midday F-O reached its maximum while F-v and F-v/F-m reached their minimum. The reverse changes occurred in the afternoon. At dusk these parameters could return to levels near those at dawn. Following exposure to a strong sunlight for more than 3 h, the dark-recovery process displayed three phases: (1) slow increases in F-0, F-v and F-v/F-m within the first hour; (2) a faster decrease in F-0 and faster increases in F-v and F-v/F-m within subsequent two hours; (3) a slow decrease in F-0 and slow increases in F-v and F-v/F-m within the fourth hour. In comparison with darkness, weak irradiance had no stimulating effect on the recovery from photoinhibition. Hence the photoinhibition in soybean leaves is mainly the reflection of reversible inactivation of some photosystem 2 reaction centres, but not the result of D1 protein loss.

Modification of a poly(methyl methacrylate) injection-molded microchip and its use for high performance analysis of DNA

Inexpensive and permanently modified poly(methyl methacrylate)(PMMA) microchips were fabricated by an injection-molding process. A novel sealing method for plastic microchips at room temperature was introduced. Run-to-run and chip-to-chip reproducibility was good, with relative standard deviation values between 1-3% for the run-to-run and less than 2.1% for the chip-to-chip comparisons. Acrylonitrile-butadiene-styrene (ABS) was used as an additive in PMMA substrates. The proportions of PMMA and ABS were optimized. ABS may be considered as a modifier, which obviously improved some characteristics of the microchip, such as the hydrophilicity and the electro-osmotic flow (EOF). The detection limit of Rhodamine 6G dye for the modified microchip on the home-made microchip analyzer showed a dramatic 100-fold improvement over that for the unmodified PMMA chip. A detection limit of the order of 10(-20) mole has been achieved for each injected phiX-174/HaeIII DNA fragment with the baseline separation between 271 and 281 bp, and fast separation of 11 DNA restriction fragments within 180 seconds. Analysis of a PCR product from the tobacco ACT gene was performed on the modified microchip as an application example.

Microfluidic devices for the analysis of apoptosis

Apoptosis is the outcome of a metabolic cascade that results in cell death in a controlled manner. Due to its important role in maintaining balance in organisms, in mechanisms of diseases, and tissue homeostasis, apoptosis is of great interest in the emerging fields of systems biology. Research into cell death regulation and efforts to model apoptosis processes have become powerful drivers for new technologies to acquire ever more comprehensive information from cells and cell populations. The microfluidic technology promises to integrate and miniaturize many bioanalytical processes, which offers an alternative platform for the analysis of apoptosis. This review aims to highlight the recent developments of microfluidic devices in measuring the hallmarks as well as the dynamic process of cellular apoptosis. The potential capability and an outlook of microfluidic devices for the study of apoptosis are addressed.

Cloning and structure analysis of hydrogenase gene from Chlamydomonas reinhardtii SE

The cDNA of Chlamydomonas reinhardtii SE encoding hydrogenase (HydA2) was obtained from the total RNA of C reinhardtii SE by RT-PCR. The DNA of hydrogenase was amplified by PCR from the genomic DNA of C reinhardtii SE. The cDNA and DNA of hydrogenase were sequenced, respectively. The structure of hydrogenase gene was analyzed by biology software. The open reading frame predicts that the hydrogenase is composed of 3584 bp encoding 505 amino acids in length with a predicted M.W. of 53.69 kDa. Ten exons (including 1518 bp) and nine introns (including 2066 bp) have been found in the hydrogenase, and there were two potential N-glycosylate sites, eight protein kinase C phosphorylation site, eight casein kinase H phosphorylation site and one sulphorylation in the sequence. The theory pI was 6.15. Total number of negatively charged residues (Asp + Glu) and positively charged residues (Arg + Lys) were 55 and 61, respectively. (c) 2005 Elsevier Ltd. All rights reserved.

Process control in agile supply chain network.

The work comprises a new theoretical development applied to aid decision making in an increasingly important commercial sector. Agile supply, where small volumes of high margin, short life cycle innovative products are offered, is increasingly carried out through a complex global supply chain network. We outline an equilibrium solution in such a supply chain network, which works through limited cooperation and coordination along edges (links) in the network. The links constitute the stochastic modelling entities rather than the nodes of the network. We utilise newly developed phase plane analysis to identify, model and predict characteristic behaviour in supply chain networks. The phase plane charts profile the flow of inventory and identify out of control conditions. They maintain quality within the network, as well as intelligently track the way the network evolves in conditions of changing variability. The methodology is essentially distribution free, relying as it does on the study of forecasting errors, and can be used to examine contractual details as well as strategic and game theoretical concepts between decision-making components (agents) of a network. We illustrate with typical data drawn from supply chain agile fashion products.

Design thinking - a critical analysis.

The latest buzz phrase to enter the world of design research is “Design Thinking”. But is this anything new and does it really have any practical or theoretical relevance to the design world? Many sceptics believe the term has more to do with business strategy and little to do with the complex process of designing products, services and systems. Moreover, many view the term as misleading and a cheap attempt to piggyback the world of business management onto design. This paper seeks to ask is design thinking anything new? Several authors have explicitly or implicitly articulated the term “Design Thinking” before, such as Peter Rowe’s seminal book “Design Thinking” [1] first published in 1987 and Herbert Simon’s “The Sciences of the Artificial” [2] first published in 1969. In Tim Brown’s “Change by Design” [3], design thinking is thought of as a system of three overlapping spaces rather than a sequence of orderly steps namely inspiration – the problem or opportunity that motivates the search for solutions; ideation – the process of generating, developing and testing ideas; and implementation – the path that leads from the design studio, lab and factory to the market. This paper seeks to examine and critically analyse the tenets of this new design thinking manifesto set against three case studies of modern design practice. As such, the paper will compare design thinking theory with the reality of design in practice.

The Sales Process Practice of Food and Drink SMEs - A Holistic Conceptual Framework: Steps, dimensions, barriers and enablers.

Purpose –The research examines the sales process practised by SMEs, and barriers and enablers that hinder and support effective selling practices from the selling organisation’s perspective in Scottish-based Food and Drink firms. Design/methodology approach - – The paper adopts an interpretivist perspective with qualitative data gathered through face-to-face semi-structured interviews. 20 people involved in selling activities were interviewed from 15 SMEs across Scotland. Thematic analysis established key findings regarding the sales process practice. Findings – Five themes emerged that affect the operationalisation of the selling process: the owner manager has considerable involvement in the sales process, SMEs with some degree of sales knowledge take a more systematic approach, SMEs lack awareness of how CRM technology can assist them, power is tipped in favour of the buyer and, the geographic location of the SME places constraints on how SMEs conduct business Research limitation/implication – Thematic analysis was chosen over other more traditional methods due to the lack of relevant quantitative data. The phenomenon of the research and research methodology means that it will not be possible to repeat this study and replicate its findings. However, the process that has been adopted does provide a basis for future research. Originality/value - The paper identifies areas where future research is required in the field alongside suggestions where policy makers and government business agencies might focus intervention to assist SMEs improve delivery of the sales process and selling effectiveness

An analysis of manufacturing simulation software.

As a management tool Similation Software deserves greater analysis from both an academic and industrial viewpoint. A comparative study of three packages was carried out from a 'first time' use approach. This allowed the ease of use and package features to be assessed using a simple theoretical benchmark manufacturing process. To back the use of these packages an objective survey on simulation use and package features was carried out within the manufacturing industry.This identified the use of simulation software, its' applicability and preception of user requirements thereby proposing an ideal package.

Adaptive denoising in spectral analysis by genetic programming

Rowland, J.J. and Taylor, J. (2002). Adaptive denoising in spectral analysis by genetic programming. Proc. IEEE Congress on Evolutionary Computation (part of WCCI), May 2002. pp 133-138. ISBN 0-7803-7281-6

Strategies that students use to trace code: an analysis based in grounded theory

Fitzgerald, S., Simon, B., and Thomas, L. 2005. Strategies that students use to trace code: an analysis based in grounded theory. In Proceedings of the First international Workshop on Computing Education Research (Seattle, WA, USA, October 01 - 02, 2005). ICER '05. ACM, New York, NY, 69-80

Police accountability in Ireland: an analysis of the problems posed by the legal, constitutional and political dimensions and how they might be addressed

The concept of police accountability is not susceptible to a universal or concise definition. In the context of this thesis it is treated as embracing two fundamental components. First, it entails an arrangement whereby an individual, a minority and the whole community have the opportunity to participate meaningfully in the formulation of the principles and policies governing police operations. Second, it presupposes that those who have suffered as victims of unacceptable police behaviour should have an effective remedy. These ingredients, however, cannot operate in a vacuum. They must find an accommodation with the equally vital requirement that the burden of accountability should not be so demanding that the delivery of an effective police service is fatally impaired. While much of the current debate on police accountability in Britain and the USA revolves around the issue of where the balance should be struck in this accommodation, Ireland lacks the very foundation for such a debate as it suffers from a serious deficit in research and writing on police generally. This thesis aims to fill that gap by laying the foundations for an informed debate on police accountability and related aspects of police in Ireland. Broadly speaking the thesis contains three major interrelated components. The first is concerned with the concept of police in Ireland and the legal, constitutional and political context in which it operates. This reveals that although the Garda Siochana is established as a national force the legal prescriptions concerning its role and governance are very vague. Although a similar legislative format in Britain, and elsewhere, have been interpreted as conferring operational autonomy on the police it has not stopped successive Irish governments from exercising close control over the police. The second component analyses the structure and operation of the traditional police accountability mechanisms in Ireland; namely the law and the democratic process. It concludes that some basic aspects of the peculiar legal, constitutional and political structures of policing seriously undermine their capacity to deliver effective police accountability. In the case of the law, for example, the status of, and the broad discretion vested in, each individual member of the force ensure that the traditional legal actions cannot always provide redress where individuals or collective groups feel victimised. In the case of the democratic process the integration of the police into the excessively centralised system of executive government, coupled with the refusal of the Minister for Justice to accept responsibility for operational matters, project a barrier between the police and their accountability to the public. The third component details proposals on how the current structures of police accountability in Ireland can be strengthened without interfering with the fundamentals of the law, the democratic process or the legal and constitutional status of the police. The key elements in these proposals are the establishment of an independent administrative procedure for handling citizen complaints against the police and the establishment of a network of local police-community liaison councils throughout the country coupled with a centralised parliamentary committee on the police. While these proposals are analysed from the perspective of maximising the degree of police accountability to the public they also take into account the need to ensure that the police capacity to deliver an effective police service is not unduly impaired as a result.

Hazard and early warning analysis based on domain specific modeling technologies

An aim of proactive risk management strategies is the timely identification of safety related risks. One way to achieve this is by deploying early warning systems. Early warning systems aim to provide useful information on the presence of potential threats to the system, the level of vulnerability of a system, or both of these, in a timely manner. This information can then be used to take proactive safety measures. The United Nation’s has recommended that any early warning system need to have four essential elements, which are the risk knowledge element, a monitoring and warning service, dissemination and communication and a response capability. This research deals with the risk knowledge element of an early warning system. The risk knowledge element of an early warning system contains models of possible accident scenarios. These accident scenarios are created by using hazard analysis techniques, which are categorised as traditional and contemporary. The assumption in traditional hazard analysis techniques is that accidents are occurred due to a sequence of events, whereas, the assumption of contemporary hazard analysis techniques is that safety is an emergent property of complex systems. The problem is that there is no availability of a software editor which can be used by analysts to create models of accident scenarios based on contemporary hazard analysis techniques and generate computer code that represent the models at the same time. This research aims to enhance the process of generating computer code based on graphical models that associate early warning signs and causal factors to a hazard, based on contemporary hazard analyses techniques. For this purpose, the thesis investigates the use of Domain Specific Modeling (DSM) technologies. The contributions of this thesis is the design and development of a set of three graphical Domain Specific Modeling languages (DSML)s, that when combined together, provide all of the necessary constructs that will enable safety experts and practitioners to conduct hazard and early warning analysis based on a contemporary hazard analysis approach. The languages represent those elements and relations necessary to define accident scenarios and their associated early warning signs. The three DSMLs were incorporated in to a prototype software editor that enables safety scientists and practitioners to create and edit hazard and early warning analysis models in a usable manner and as a result to generate executable code automatically. This research proves that the DSM technologies can be used to develop a set of three DSMLs which can allow user to conduct hazard and early warning analysis in more usable manner. Furthermore, the three DSMLs and their dedicated editor, which are presented in this thesis, may provide a significant enhancement to the process of creating the risk knowledge element of computer based early warning systems.

Integrated genetic analysis systems

The overall objective of this thesis is to integrate a number of micro/nanotechnologies into integrated cartridge type systems to implement such biochemical protocols. Instrumentation and systems were developed to interface such cartridge systems: (i) implementing microfluidic handling, (ii) executing thermal control during biochemical protocols and (iii) detection of biomolecules associated with inherited or infectious disease. This system implements biochemical protocols for DNA extraction, amplification and detection. A digital microfluidic chip (ElectroWetting on Dielectric) manipulated droplets of sample and reagent implementing sample preparation protocols. The cartridge system also integrated a planar magnetic microcoil device to generate local magnetic field gradients, manipulating magnetic beads. For hybridisation detection a fluorescence microarray, screening for mutations associated with CFTR gene is printed on a waveguide surface and integrated within the cartridge. A second cartridge system was developed to implement amplification and detection screening for DNA associated with disease-causing pathogens e.g. Escherichia coli. This system incorporates (i) elastomeric pinch valves isolating liquids during biochemical protocols and (ii) a silver nanoparticle microarray for fluorescent signal enhancement, using localized surface plasmon resonance. The microfluidic structures facilitated the sample and reagent to be loaded and moved between chambers with external heaters implementing thermal steps for nucleic acid amplification and detection. In a technique allowing probe DNA to be immobilised within a microfluidic system using (3D) hydrogel structures a prepolymer solution containing probe DNA was formulated and introduced into the microfluidic channel. Photo-polymerisation was undertaken forming 3D hydrogel structures attached to the microfluidic channel surface. The prepolymer material, poly-ethyleneglycol (PEG), was used to form hydrogel structures containing probe DNA. This hydrogel formulation process was fast compared to conventional biomolecule immobilization techniques and was also biocompatible with the immobilised biomolecules, as verified by on-chip hybridisation assays. This process allowed control over hydrogel height growth at the micron scale.