Solvolytic disproportionation of non-stoichiometric oxides of praseodymium and terbiumstar, open

The solvolytic disproportionation of non-stoichiometric PrOχ and TbOχ in acid solutions to produce higher oxides has been investigated. Some new non-stoichiometric phases have been reported. A number of interesting features of the non-stoichiometric rare earth oxides have been discussed and the need for a satisfactory structural model has been pointed out.

Preparation, characterization and thermal decomposition of praseodymium, terbium and neodymium carbonates

The preparation of three different types of carbonates of praseodymium, neodymium and terbium has been described. The carbonates have been characterized by potentiometry, chemical analysis, X-ray crystallography, infra-red spectroscopy and by their thermal behaviour. The thermal decomposition of several carbonates has been studied exhaustively under a variety of conditions and the stoicheiometry, thermodynamics and energetics of the reactions at various stages of decomposition have been examined. The stoicheiometry of the oxides obtained as final products of decomposition has been examined.

Role of silicon carbide/mercury interface in ignitrons

A new model of ignition in an ignitron, based on the electrical breakdown of the junction between the ignitor (semiconductor) and the mercury (metal) is proposed. A method of evaluating some of the ignition characteristics is also developed. The paper gives a critical summary of the various characteristics of the ignition process. The new model is stated and used to explain all the ignition characteristics. The experiments conducted in support of the various aspects of this model are also given.

Kohdennetut liposomit syövän hoidossa

Suurin ongelma syöpätautien lääkehoidossa on sen aiheuttamat toksiset sivuvaikutukset. Tyypillisesti vain noin 1 % elimistöön annostellusta lääkeaineesta saavuttaa hoitoa tarvitsevat syöpäsolut, loppuosa lääkeaineesta jää vahingoittamaan elimistön terveitä soluja. Toksiset sivuvaikutukset rajoittavat lääkehoidon annoksen nostamista elimistössä riittävälle pitoisuudelle, mikä johtaa usein sairauden ennenaikaiseen pahenemiseen ja mahdollisen lääkeaineresistenssin kehittymiseen. Liposomien välittämä lääkeaineen kohdentaminen voidaan jakaa kahteen eri menetelmään: passiiviseen ja aktiiviseen kohdentamiseen. Liposomien passiivisen kohdentamisen tarkoituksena on lisätä sytotoksisen lääkeaineen paikallistumista pelkästään kasvainkudokseen. Passiivinen kohdentaminen perustuu liposomien kulkeutumiseen verenkierron mukana, jolloin liposomit kerääntyvät epänormaalisti muodostuneeseen kasvainkudokseen. Liposomien aktiivisella kohdentamisella pyritään parantamaan passiivisesti kohdentuvien liposomien terapeuttista tehokkuutta kohdentamalla lääkeaineen vaikutus pelkästään syöpäsoluihin. Aktiivisessa kohdennuksessa liposomin pintaan kiinnitetään ligandi, joka spesifisesti tunnistaa kohdesolun. Tämän pro gradu -tutkielman kirjallisen osion tarkoituksena oli tutustua syöpäkudokseen kohdennettujen liposomien ominaisuuksiin tehokkaan soluunoton ja sytotoksisuuden saavuttamiseksi. Kokeellisessa osiossa tutkittiin kohdennettujen liposomien soluunottoa ja sytotoksista vaikutusta ihmisen munasarjasta eristetyillä adenokarsinoomasoluilla (SKOV-3). Liposomit kohdennettiin setuksimabi (C225, Erbitux®) vasta-aineella, jonka on todettu olevan tietyissä syöpätyypeissä (mm. keuhko- ja kolorektaalisyövissä, pään ja kaulan syövissä sekä rinta-, munuais-, eturauhas-, haima- ja munasarjasyövissä) yli-ilmentyneen epidermaalisen kasvutekijäreseptoriperheen HER1-proteiinin (ErbB-1, EGFR, epidermal growth factor receptor) spesifinen ja selektiivinen inhibiittori. Afrikan viherapinan munuaisista lähtöisin olevaa CV-1 solulinjaa käytettiin kontrollina kuvaamaan elimistön normaaleja soluja. Kohdennettujen liposomien soluunottoa tutkittiin soluunottokokeilla, joissa käytettiin kontrollina kohdentamattomia pegyloituja liposomeja. Setuksimabi-vasta-aineen spesifinen sitoutuminen EGF-reseptoriin todettiin kilpailutuskokeilla. Doksorubisiinia sisältävien immunoliposomien sytotoksisuutta selvitettiin Alamar Blue™ -elävyystestillä. Lisäksi immunoliposomien säilyvyyttä seurattiin mittaamalla liposomien keskimääräinen halkaisija noin kahden viikon välein. Setuksimabi-vasta-aineella kohdennettujen liposomien soluunotto oli huomattavasti suurentunut SKOV-3 syöpäsoluissa ja doksorubisiinia sisältävät kohdennetut liposomit aiheuttivat voimakkaamman sytotoksisen vaikutuksen kuin kohdentamattomat liposomit. Kohdennettujen doksorubisiiniliposomien sytotoksisuus tuli kuitenkin esille viiveellä, mikä viittaa lääkeaineen hitaaseen vapautumiseen liposomista. Suurentunutta soluunottoa ja sytotoksista vaikutusta ei havaittu CV-1 solulinjassa. Kohdennettujen liposomien sovellusmahdollisuudet lääketieteessä ja syövän hoidossa ovat merkittävät. Tällä hetkellä liposomien kliininen käyttö rajoittuu passiivisesti kohdennettuihin liposomeihin (Doxil® (Am.),Caelyx® (Eur.)). Lupaavista solukokeista huolimatta kohdennettujen liposomien terapeuttinen käyttö tulevaisuudessa näyttää haasteelliselta.

Cloning,overexpression and purification of functionally active Saccharomyces cerevisiae Hop1 protein from scherichia coli

One of the major limitations to the application of high-resolution biophysical techniques such as X-crystallography and spectroscopic analyses to structure-function studies of Saccharomyces cerevisiae Hop1 protein has been the non-availability of sufficient quantities of functionally active pure protein. This has, indeed, been the case of many proteins, including yeast synaptonemal complex proteins. In this study, we have performed expression screening in Escherichia coli host strains, capable of high-level expression of soluble S. cerevisiae Hop1 protein. A new protocol has been developed for expression and purification of S. cerevisiae Hop1 protein, based on the presence of hexa-histidine tag and double-stranded DNA-Cellulose chromatography. Recombinant S. cerevisiae Hop1 protein was >98% pure and exhibited DNA-binding activity with high-affinity to the Holliday junction. The availability of the recombinant HOP1 expression vector and active Hop1 protein would facilitate structure-function investigations as well as the generation of appropriate truncated and site-directed mutant proteins, respectively. (C) 2010 Elsevier Inc. All rights reserved.

Low-temperature deformation behaviour of polycrystalline copper

Low-temperature plastic flow in copper was investigated by studying its tensile and creep deformation characteristics. The dependence of the flow stress on temperature and strain rate was used to evaluate the thermal activation energy while the activation area was derived from the change-in-stress creep experiments. A value of 0.6 eV was obtained for the total obstacle energy both in electrolytic and commerical copper. The activation areas in copper of three selected purities fell in the range 1200 to 100 b2. A forest intersection mechanism seems to control the temperature dependent part of the flow stress. The increase in the athermal component of the flow stress with impurity content in copper is attributed to a change in the dislocation density. The investigation also revealed that thermal activation of some attractive junctions also takes place during low-temperature creep. The model of attractive junction formation on a stress decrement during creep, yields a value of 45±10 ergs cm-2 for the stacking fault energy in copper.

The subsidence rates of suspensions of lithium stearate in n-heptane with n-alcohols as additives

Suspensions of lithium stearate in n-heptane are highly unstable, undergoing gelation even at concentrations as low as 1 g./1. The rate of subsidence of these weakly gelled suspensions is decreased at first by the addition of n-alcohols, but passes through a minimum in some cases. The minimum subsidence rate occurs while the adsorption of the alcohol is still below its saturation value. One possible explanation of the effect is that the solvent layer between particles at the junction points in the gel becomes simultaneously more polar, tending toward an increased gel strength, and also thicker, tending toward a decreased gel strength.

Adhesion,Presence and Antifouling of Deinococcus geothermalis in Paper Machine Environment

This thesis has two items: biofouling and antifouling in paper industry. Biofouling means unwanted microbial accumulation on surfaces causing e.g. disturbances in industrial processes, contamination of medical devices or of water distribution networks. Antifouling focuses on preventing accumulation of the biofilms in undesired places. Deinococcus geothermalis is a pink-pigmented, thermophilic bacterium, and extremely resistant towards radiation, UV-light and desiccation and known as a biofouler of paper machines forming firm and biocide resistant biofilms on the stainless steel surfaces. The compact structure of biofilm microcolonies of D. geothermalis E50051 and the adhesion into abiotic surfaces were investigated by confocal laser scanning microscope combined with carbohydrate specific fluorescently labelled lectins. The extracellular polymeric substance in D. geothermalis microcolonies was found to be a composite of at least five different glycoconjugates contributing to adhesion, functioning as structural elements, putative storages for water, gliding motility and likely also to protection. The adhesion threads that D. geothermalis seems to use to adhere on an abiotic surface and to anchor itself to the neighbouring cells were shown to be protein. Four protein components of type IV pilin were identified. In addition, the lectin staining showed that the adhesion threads were covered with galactose containing glycoconjugates. The threads were not exposed on planktic cells indicating their primary role in adhesion and in biofilm formation. I investigated by quantitative real-time PCR the presence of D. geothermalis in biofilms, deposits, process waters and paper end products from 24 paper and board mills. The primers designed for doing this were targeted to the 16S rRNA gene of D. geothermalis. We found D. geothermalis DNA from 9 machines, in total 16 samples of the 120 mill samples searched for. The total bacterial content varied in those samples between 107 to 3 ×1010 16S rRNA gene copies g-1. The proportion of D. geothermalis in those same samples was minor, 0.03 1.3 % of the total bacterial content. Nevertheless D. geothermalis may endanger paper quality as its DNA was shown in an end product. As an antifouling method towards biofilms we studied the electrochemical polarization. Two novel instruments were designed for this work. The double biofilm analyzer was designed for search for a polarization program that would eradicate D. geothermalis biofilm or from stainless steel under conditions simulating paper mill environment. The Radbox instrument was designed to study the generation of reactive oxygen species during the polarization that was effective in antifouling of D. geothermalis. We found that cathodic character and a pulsed mode of polarization were required to achieve detaching D. geothermalis biofilm from stainless steel. We also found that the efficiency of polarization was good on submerged, and poor on splash area biofilms. By adding oxidative biocides, bromochloro-5,5-dimethylhydantoin, 2,2-dibromo-2-cyanodiacetamide or peracetic acid gave additive value with polarization, being active on splash area biofilms. We showed that the cathodically weighted pulsed polarization that was active in removing D. geothermalis was also effective in generation of reactive oxygen species. It is possible that the antifouling effect relied on the generation of ROS on the polarized steel surfaces. Antifouling method successful towards D. geothermalis that is a tenacious biofouler and possesses a high tolerance to oxidative stressors could be functional also towards other biofoulers and applicable in wet industrial processes elsewhere.

Avoimesti sitoutuneena : Lähetystyö kristillisessä kasvatuksessa ja vapaaehtoistyössä

In this study the junction of Christian mission, Christian education and voluntary work are examined in the Christian student voluntary association Opiskelijain Lähetysliitto (OL), which is the Finnish successor to the Student Volunteer Movement. The main subjects are the structure and content of the mission education as one aspect of Lutheran education and the reasons for expressing the mission interest through voluntary work. The research questions are as follows: What kind of organization has the OL been? What has mission education been like in the OL? Why have the former chairpersons participated in the OL? How have purposiveness and intentionality arisen among the former chairpersons? The study is empirical despite having a historical and retrospective view, since the OL is explored during the period 1972 2000. The data consists of the OL s annual reports, membership applications (N=629) and interviews of all 25 former chairmen. Data is analysed by qualitative and quantitative content analysis in a partly inductive and partly deductive manner. The pedagogical framework arises from situational learning theory (Lave - Wenger 1991), which was complemented with the criteria for meaningful learning (Jonassen 1995), the octagon model of volunteer motivation (Yeung 2004) and the definitions of intentionality and purposiveness in the theory of teachers pedagogical thinking (Kansanen et al. 2000). The analysis of the archive data showed that the activities of the OL are reminiscent of those of the missions of the Finnish Evangelical Lutheran Church congregations. The biggest difference was that all OL participants were young adults, the age group that is the greatest challenge to the Church. The OL is therefore an interesting context in which to explore mission education and mission interest. The key result of the study was the forming of a model of mission educa-tion. The model has three educational components: values, goals and methods. The gist of the model is formed by the goals. The main goal is the arousing and strengthening of mission interest which has emotional, cognitive and practical aspects. The subgoals create the horizontal vertical and inward outward dimensions of the model, which are the metalevels of mission education. The subgoals reveal that societal and religious education may embody a missionary dimension when they are understood as missionary training. Further, a distinction between mission education and missionary training was observed. The former emphasizes the main goal of the model and the latter underlines the subgoals. Based on the vertical dimension of the model the study suggests that the definition of religious competence needs to be complemented with missional competence. Reasons for participating in the OL were found to be diverse as noted in other studies on volunteering and motivating factors, and were typical to young people such as the importance of social relations. The study created new motivational themes that occurred in the middle of the continuity newness and the distance proximity dimensions, which were not found in Yeung s research. Mission interest as voluntary work appeared as oriented towards one s own spirituality or towards the social community. On the other hand, mission interest was manifested as intentional education in order to either improve the community or to promote the Christian mission. In the latter case the mission was seen as a purpose in life and as a future profession. Keywords: mission, Christian education, voluntary work, mission education, mission interest, stu-dent movement

Genetic characterization of Indian type O FMD virus 3A region in context with host cell preference

The 3A region of foot-and-mouth disease virus has been implicated in host range and virulence. For example, amino acid deletions in the porcinophilic strain (O/TAW/97) at 93-102 aa of the 153 codons long 3A protein have been recognized as the determinant of species specificity. In the present study, 18 type 0 FMDV isolates from India were adapted in different cell culture systems and the 3A sequence was analyzed. These isolates had complete 3A coding sequence (153 aa) and did not exhibit growth restriction in cells based on species of origin. The 3A region was found to be highly conserved at N-terminal half (1-75 aa) but exhibited variability or substitutions towards C-terminal region (80-153). Moreover the amino acid substitutions were more frequent in recent Indian buffalo isolates but none of the Indian isolates showed deletion in 3A protein, which may be the reason for the absence of host specificity in vitro. Further inclusive analysis of 3A region will reveal interesting facts about the variability of FMD virus 3A region in an endemic environment. (C) 2010 Elsevier B.V. All rights reserved.

Switching frequency variation control in hysteresis PWM controller for IM drives using variable parabolic bands for current error space phasor

Variation of switching frequency over the entire operating speed range of an induction motor (M drive is the major problem associated with conventional two-level three-phase hysteresis controller as well as the space phasor based PWM hysteresis controller. This paper describes a simple hysteresis current controller for controlling the switching frequency variation in the two-level PWM inverter fed IM drives for various operating speeds. A novel concept of continuously variable hysteresis boundary of current error space phasor with the varying speed of the IM drive is proposed in the present work. The variable parabolic boundary for the current error space phasor is suggested for the first time in this paper for getting the switching frequency pattern with the hysteresis controller, similar to that of the constant switching frequency voltage-controlled space vector PWM (VC-SVPWM) based inverter fed IM drive. A generalized algorithm is also developed to determine parabolic boundary for controlling the switching frequency variation, for any IM load. Only the adjacent inverter voltage vectors forming a triangular sector, in which tip of the machine voltage vector ties, are switched to keep current error space vector within the parabolic boundary. The controller uses a self-adaptive sector identification logic, which provides smooth transition between the sectors and is capable of taldng the inverter up to six-step mode of operation, if demanded by drive system. The proposed scheme is simulated and experimentally verified on a 3.7 kW IM drive.

Elimination of common mode voltage and fifth and seventh harmonics in a multilevel inverter fed IM drive using 12-sided polygonal voltage spacephasor

A multilevel inverter with 12-sided polygonal voltage space vector structure is proposed in this paper. The present scheme provides elimination of common mode voltage variation and 5(th) and 7(th) order harmonics in the entire operating range of the drive. The proposed multi level structure is achieved by cascading only the conventional two-level inverters with asymmetrical DC link voltages. The bandwidths problems associated with conventional hexagonal voltage space vector structure current controllers, due to the presence of 5(th) and 7(th) harmonics, in the over modulation region, is absent in the present 12-sided structure. So a linear voltage control up to 12-step operation is possible, from the present twelve sided scheme, with less current control complexity. An open-end winding structure is used for the induction motor drive.

Generation of parabolic trajectories for current error space phasor similar to an SVPWM controller for control of switching frequency variation in current hysteresis PWM controlled IM drives

Switching frequency variation over a fundamental period is a major problem associated with hysteresis controller based VSI fed IM drives. This paper describes a novel concept of generating parabolic trajectories for current error space phasor for controlling the switching frequency variation in the hysteresis controller based two-level inverter fed IM drives. A generalized algorithm is developed to determine unique set of parabolic trajectories for different speeds of operation for any given IM load. Proposed hysteresis controller provides the switching frequency spectrum of inverter output voltage, similar to that of the constant switching frequency VC-SVPWM based IM drive. The scheme is extensively simulated and experimentally verified on a 3.7 kW IM drive for steady state and transient performance.

Multiwall carbon nanotubes from pyrolysis of tetrahydrofuran

Multiwalled carbon nanotubes have been prepared by pyrolysing tetrahydrofuran (THF) in the presence of nickelocene. Pyrolysis of the precursor mixture has been achieved at temperature as low as 600 degrees C. In this simple approach no carrier gas has been used. The yield of purified carbon nanotubes is found to be more than 65%. Characterization of the as-prepared and purified nanotubes are done by Xray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy and Raman spectra.

An Experimental Study to Show the Effect of Thermal Stress on Thermal Contact Conductance at Sub-megapascal Contact Pressures

Experimental studies are presented to show the effect of thermal stresses on thermal contact conductance (TCC) at low contact pressures. It is observed that in a closed contact assembly, contact pressure acting on the interface changes with the changing temperature of contact members. This change in contact pressure consequently causes variations in the TCC of the junction. A relationship between temperature change and the corresponding magnitude of developed thermal stress in a contact assembly is determined experimentally. Inclusion of a term called temperature dependent load correction factor is suggested in the theoretical model for TCC to make it capable of predicting TCC values more accurately in contact assemblies that experience large temperature fluctuations. [DOI: 10.1115/1.4001615]