Avaliação e correlação da presença de endotoxinas e MMP-3, -8 e -9 em canais radiculares com necrose pulpar submetidos ao tratamento endodôntico - estudo in vivo

It is know that endotoxin and various matrix metalloproteinases (MMPs) are involved in the development of periapical lesions. The purpose of this study was to evaluate and correlate the presence of endotoxins and MMP- 3, MMP-8 and MMP-9 in root canals of teeth with necrotic pulp and periapical lesion before, during and after the biomechanical preparation (PBM) using a combination of different irrigations solutions and intracanal dressing. Thirty-three single-root teeth with a diagnosis of pulp necrosis and periapical lesion radiographically visible were selected. Immediately after the coronal opening was collected the first sample from the root canal content. Then, all canals were prepared (cervical and middle thirds) by oscillatory instruments (EndoEze) and irrigated by 2.5% NaOCl. After, a manual preparation was made for the apical third and the teeth were divided into three groups according to the irrigation protocol: G1) 2.5% NaOCl (4 manual files); G2) 2.5% NaOCl (2 manual files) + [Ca (OH)2 0.14%] (2 manual files) and G3) 2.5% NaOCl (2 manual files) + polymyxin B (2 manual files). After the PBM, the second sample was collected; then the third collect was performed after using EDTA final flush. The fourth sample was collected 14 days after placing the dressing [2% chlorhexidine gel + Ca(OH)2]. Quantification of endotoxins was performed by a kinetic chromogenic lysate from amoebocytes of Limulus (LAL) and quantification of MMPs by ELISA assay. The results were analyzed statistically by Kruskal-Wallis and Dunn's test (5%) and ordinal Spearman correlation. Presence of endotoxin was observed in 100% of cases and G3 showed the greatest reduction of endotoxins from the 1st to the 2nd samples (97%), being statistically similar to G2 (84.2%) and different from G1 (49.4%) (p<0.05). The intracanal dressing promoted a significant reduction of endotoxin, no difference among the groups. For...

Características da carcaça e alometria dos tecidos de cabritos F1 Boer × Saanen

Com o objetivo de avaliar as características de carcaça e a alometria dos cortes comerciais e dos tecidos de cabritos F1 Boer × Saanen, 35 animais foram abatidos ao atingirem 5, 10, 15, 20 e 25 kg de peso vivo (PV). A dieta dos animais foi composta de leite de vaca nos primeiros 49 dias e ração à vontade do sétimo dia até o abate. Os cortes foram obtidos após o resfriamento da carcaça e a perna foi dissecada em músculo, osso e gordura. O PV teve efeito linear decrescente no rendimento de carcaça fria e na área de olho-de-lombo por kg de carcaça. Os pesos de perna, paleta e pescoço em relação à carcaça fria decresceram linearmente, mas houve efeito quadrático sobre o rendimento de costelas e lombo. O crescimento de paleta, pescoço e perna foi isométrico (b=1) ao do corpo, enquanto o das costelas e do lombo foi mais lento (b¹ 1). Os músculos da perna cresceram igualmente, a gordura mais lenta e os ossos mais rapidamente que a perna, enquanto o desenvolvimento da gordura subcutânea foi mais tardio que o da intermuscular. Para obtenção de carcaça de 8 a 11 kg com rendimento superior a 44%, boa proporção de músculo e gordura com menor perda durante o resfriamento, recomenda-se abater os animais com PV entre 20 e 25 kg, mas, se o objetivo for carcaça de menor peso, o abate dos animais deve ser feito ao final do aleitamento com aproximadamente 10 kg de peso corporal.

Treatment of traumatic dental intrusion by surgical repositioning: clinical case report

The prevalence of dental trauma and its consequences are challenging. This article presents a clinical case of a 9-year-old female who was in a bicycling accident and had a dental intrusion of the left maxillary lateral incisor with extensive dislocation. In the emergency department, surgical repositioning of the intruded tooth and a splinting with steel wire and composite resin was performed and the soft-tissue lesions were sutured. Two weeks after the first visit, pulp necrosis was found and endodontic treatment of the intruded tooth was started with a calcium hydroxide dressing. Despite the traumatic nature of the dental injury, the result of treatment was favorable. After 3 years of follow-up, repair of the resorptions and no signs of ankylosis of the teeth involved were evident. Considering the patient's age and the extent of intrusion, it was concluded that surgical repositioning associated with adequate endodontic therapy was an effective alternative treatment for this case.

Humanização na assistência odontológica de pessoas com deficiência, através do projeto Cão Cidadão-Unesp

The Araçatuba School of Dentistry along with the Veterinary Medical Course, both from UNESP, develop the Extension Project called “Cão Cidadão UNESP” (Unesp Citizen Dog), which is accomplished in some assistance societies, including the Dental Assistance Center to Persons with Disabilities (“Centro de Assistência Odontológica à Pessoa com Deficiência” - CAOE-UNESP). This project develops a multidisciplinary work involving professionals and students from health sciences. The project aims at developing activities to relieve stress, fear and anxiety of patients with disabilities in the moment that precedes the dental treatment. The team performs procedures such as walking with the dogs and patients, toothbrushing the dogs so the patients can see it, in order to learn and motivate themselves, dressing the dogs with some accessories such as white clothes, mask and cap, to associate with image of the dentist, making this relationship more pleasant and welcoming. It is evidenced, through reports of professionals, that the patients become calmer and more collaborative with the dentists, distracting them from the treatment focus and creating a positive bond. It should be noted that this experience has contributed to motivate the professionals to introduce new techniques for dental approach, such as Animal Assisted Therapy. It also shows that animals can be very helpful in treating people with disabilities, because they offer a lot of love, companionship and provide moments of joy and happiness to the participants.

Atividade antimicrobiana de cimentos endodônticos

The antimicrobial activity is a fundamental property of root-canal sealers due to persistence of residual microorganisms in the root canal system, even after the chemo-mechanical preparation and using of intracanal dressing. The aim of this study is to review the literature about the antimicrobial properties of some of the main root-canal sealers. Although there is controversy regarding this property, probably due to differences in the methodologies used in the studies, it was concluded that the sealers with the best antimicrobial activity were (in ascending order): Endofill, Ketac Endo, Sealapex, AH Plus, Endo CPM Sealer, Sealer 26 and Epiphany. Activ GP still needs scientific research to evaluate this property.

Susceptibility of microorganisms isolated from necrotic pulps to calcium hydroxide

Calcium hydroxide has been used as pulp-capping agent and canal dressing due to its antimicrobial and anti-inflammatory properties besides its ability to induce formation of mineralized tissues. The aim of this study was to evaluate the susceptibility to calcium hydroxide of 146 bacterial strains isolated from endodontic infections. MIC was determined by using an agar dilution method, while contact bactericide activity was performed through in broth. All the isolates were sensitive to calcium hydroxide in concentrations that varied from 0.5mg/ml to 128 mg/ml, and the genera Enterococcus, Pseudomonas, Staphylococcus and Actinomyces were the most resistant. Gramnegative anaerobes proved to be the most sensitive isolates. All the isolates were inhibited after 60 minutes of contact with the alkali in concentration of 100mg/ml

Caracterização mineralógica e química das fontes de poeira e sua influência na atmosfera da região do polo cerâmico de Santa Gertrudes (SP)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização geofísica no Gabro Santa Catarina, São Sepé (RS)

Geophysical methods are widely used in mineral exploration for several types of mineral deposits. When combined with direct studies as geochemistry, a substantial increase in the probability of ore discovery is possible in mineral exploration activities. Electrical geophysical methods are particularly promising in studies related to the search of sulphides due to the contrast of physical properties electric resistivity and chargeability. This paper presents the results obtained from the application of Resistivity (DC) and Induced Polarization methods, through the electrical profiling technique, aiming at evaluating the potential mineral of a gabbro intruded in a metasedimentary sequence, in an area where several occurrences of gold and copper were described. This gabbro is ranked on the Basic-Ultrabasic stratiform bodies, which gather peridotites, gabbros, and layered anortosites. Three radial lines of electrical profiling were performed, spaced of 60° and crossing at the area center, with readings of electric resistivity and chargeability in Wenner-Schlumberger array. The association of low resistivity and high chargeability areas has allowed defining potentially mineralized zones related to structures that condition the drainage net in the gabbro domain. Grains of gold detected through geochemical prospection of alluvial sediments dowstream from the gabbro may have originated from leaching of ores deposited in fractures through the action of river waters within the gabbro domain, possibly consisting of sulphides and gold.

Avaliação da eficácia dos biocurativos em ratos wistar com lesões de pele causadas por queimaduras

Accidents caused by thermal, chemical, electrical or radioactive agents cause skin lesions causing burns of varying degrees. The therapeutic approach aims to restore damaged tissues and involves a wide range of products on the market. This study aims to evaluate the use of biological dressing, biotech product developed at the Blood Center of Botucatu / UNESP obtained from fresh frozen plasma or platelet concentrate with in vitro addition of thrombin and calcium gluconate. This addition in the platelet concentrate, intended to release the active growth factors of the platelets granules on the healing process. The study of the effectiveness of Platelet Gel home made in Wistar rats was established, in agreement with scald burns, comparing efficacy and cost of Platelet Gel with usual hospital -based treatment collagenase + chloramphenicol plus cost analysis through pharmacoeconomics. We used 25 Wistar rats were divided into 3 treatment groups: Group A, Collagenase + Chloramphenicol; Group B, Platelet Gel and C, control. The products were applied every other day for 30 days in animals. In group A, there was the presence of erythema and crust in all animals. The exudates was indentified 2/10 animals. For the Group B, we observed the presence of erythema and crust at all and no presence of exudates. In group C all the animals showed erythema with no presence of exudates and scab occurred in 1/10. Statistical analysis showed significant difference ( p < 0.0 ) for crust formation between Groups B and C. In the histological analysis, group A showed a slight amount of blood vessels and collagen fibers, moderate amounts of macrophages and fibroblasts was observed while B and C groups showed moderate amounts of blood vessels, macrophages and fibroblasts and discreet presence of collagen fibers. The re-epithelialization occurred in most animals of all groups without significant statistical differences. For the aspects of pharmacoeconomics, the platelet gel presented a better cost - effectiveness in relation to treatment based on collagenase / chloramphenicol. In light of the ethical aspects of the raw material is the result of spontaneous blood donation, the proposal should have biological dressings productions the responsibility of public blood transfusion centers for free distribution. This may point to the production chain of Brazilian blood banks like special blood components for use no intravenous.

Grinding of AISI 4340 steel with interrupted cutting by aluminum oxide grinding wheel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ultra-precision face grinding with constant pressure, lapping kinematics, and SiC grinding wheels dressed with overlap factor

Several machining processes have been created and improved in order to achieve the best results ever accomplished in hard and difficult to machine materials. Some of these abrasive manufacturing processes emerging on the science frontier can be defined as ultra-precision grinding. For finishing flat surfaces, researchers have been putting together the main advantages of traditional abrasive processes such as face grinding with constant pressure, fixed abrasives for two-body removal mechanism, total contact of the part with the tool, and lapping kinematics as well as some specific operations to keep grinding wheel sharpness and form. In the present work, both U d-lap grinding process and its machine tool were studied aiming nanometric finishing on flat metallic surfaces. Such hypothesis was investigated on AISI 420 stainless steel workpieces U d-lap ground with different values of overlap factor on dressing (Ud=1, 3, and 5) and grit sizes of conventional grinding wheels (silicon carbide (SiC)=#800, #600, and #300) applying a new machine tool especially designed and built for such finishing. The best results, obtained after 10 min of machining, were average surface roughness (Ra) of 1.92 nm, 1.19-μm flatness deviation of 25.4-mm-diameter workpieces, and mirrored surface finishing. Given the surface quality achieved, the U d-lap grinding process can be included among the ultra-precision abrasive processes and, depending on the application, the chaining steps of grinding, lapping, and polishing can be replaced by the proposed abrasive process.

Produção e qualidade de batata-doce em função das doses e parcelamento da adubação potássica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Energy sources in the supplementation of beef cattle grazing Brachiaria brizantha cv. Xaraés

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Conhecimento dos enfermeiros sobre as ações de prevenção da infecção de corrente sanguinea associada ao cateter venoso central

Pós-graduação em Enfermagem (mestrado profissional) - FMB

Tipo de cimentação em materiais duros do perfil de alteração da mina de fosfato da Anglo American, Catalão-GO

One of the main challenges in the mining sector at present, related to the optimization of mineral assets, consists in to find the best proportion of each geological material to be mined and homogenized to ensure high productivity and stability in ore processing plants. The stability of a mineral processing plant is factor for achieving operational excellence, as a stable performance of the plants ensures economy and adherence to financial planning businesses. Is already well Know that the feed rate of the processing plants is dependent on the hardness and quality of the ore. Therefore, the ore behavior predictability is the solution to ensure the stability of mineral processing plants. This work was developed in Anglo American Phosphate Brazil Ltda., at the Fazenda Chapadão Phosphate Mine, located in the southeastern portion of the state of Goiás, in the municipalities of Catalão and Ouvidor. The phosphate ore is the result of supergene apatite concentration in the weathering profile of the alkaline ultramafic phlogopitized rocks, intruded by foscoritic and carbonatitic rocks series. The weathering profile has about 100 meters thick and is divided into three basic types, from top to bottom, coinciding with decreasing intensity of weathering: oxidized ore, micaceous ore and weathered rock. In each portion of this weathering profile, mainly near the contacts between these three divisions, are hard materials, cemented by minerals such as apatite, quartz, goethite, monazite and barite. The different features presented by these materials makes to be vital the correct identification, quantification and location of different hard materials in the mine area, to maximize its use. The main objective of this study was to define the type of cementation of hard materials which predominates in each portion of the weathering profile in the mine, as well as their relationship with the protolith. The work involved geological mapping, channel sampling...