Writing self-assembled monolayers with Cs: Optimization of atomic nanolithography imaging using self-assembled monolayers on gold substrates

We report the results of a study into the factors controlling the quality of nanolithographic imaging. Self-assembled monolayer (SAM) coverage, subsequent postetch pattern definition, and minimum feature size all depend on the quality of the Au substrate used in material mask atomic nanolithographic experiments. We find that sputtered Au substrates yield much smoother surfaces and a higher density of {111}-oriented grains than evaporated Au surfaces. Phase imaging with an atomic force microscope shows that the quality and percentage coverage of SAM adsorption are much greater for sputtered Au surfaces. Exposure of the self-assembled monolayer to an optically cooled atomic Cs beam traversing a two-dimensional array of submicron material masks mounted a few microns above the self-assembled monolayer surface allowed determination of the minimum average Cs dose (2 Cs atoms per self-assembled monolayer molecule) to write the monolayer. Suitable wet etching, with etch rates of 2.2 nm min-1, results in optimized pattern definition. Utilizing these optimizations, material mask features as small as 230 nm in diameter with a fractional depth gradient of 0.820 nm were realized.

Electrical properties of platinum interconnects deposited by electron beam induced deposition of the carbon-free precursor, Pt(PF3)4

Comprehensive analysis of the electrical properties, structure and composition of Pt interconnects, developed via mask-less, electron beam induced deposition of the carbon-free Pt precursor, Pt(PF3)4, is presented. The results demonstrate significantly improved electrical performance in comparison with that generated from the standard organometallic precursor, (CH3)3Pt(CpCH3). In particular, the Pt interconnects exhibited perfect ohmic behavior and resistivity that can be diminished to 0.24 × 10−3 Ω cm, which is only one order of magnitude higher than bulk Pt, in comparison to 0.2 Ω cm for the standard carbon-containing interconnects. A maximum current density of 1.87 × 107 A cm−2 was achieved for the carbon-free Pt, compared to 9.44 × 105 A cm−2 for the standard Pt precursor. The enhanced electrical properties of the as-deposited materials can be explained by the absence of large amounts of carbon impurities, and their further improvement by postdeposition annealing in N2. In-situ TEM heating experiments confirmed that the annealing step induces sintering of the Pt nanocrystals and improved crystallinity, which contributes to the enhanced electrical performance. Alternative annealing under reducing conditions resulted in improved performance of the standard Pt interconnects, while the carbon-free deposit suffered electrical and structural breakage due to formation of larger Pt islands

Spic'ing into Existence: Epitaph, Epithet, and the Ethnopoetic Imagination

Quién Es, Quién Somos? Spic’ing into Existence claims a four-fold close-reading: first, analysis of texts: from theoretical meditations to (prison) memoir and film. Second, a half dozen central figures appear, largely Latinx and black American. They cut across a score of registers, socio-economics, ideological reservations, but all are, as Carl Carlton sang, poetry in motion. Writers, poets, theologians, pathologists, artists, comedians, actors, students whose vocation is invocation, the inner surge of their calling. Third, the manuscript draws from a series of historical moments—from radical liberation of the late 60s, to contemporary student activism. Finally, this body of work is movement, in all its social, gestural, and kinesthetic viscera. From this last heading, we peel away layers of what I call the ethnopoet, the fascia undoing that reveals its bio-political anatomy, dressing its bare life with kinship speech. First, the social revolutions of the Civil Rights, Black Power, abolitionism, the Black Panthers and Young Lords, boycotts and jarring artistic performances. These events are superficial not in vain sense, but key epicenters of underground murmurings, the workings of a cunning assailant. She robs not lavish estates, but another day to breathe. Gesturally, as perhaps the interlocutor, lies this author, interspersing his own diatribes to conjure her presence. The final branch is admittedly the most intangible. Kinesthetically, we map the nimbleness, footwork lígera of what I call the ethnopoet. Ethnopoet is no mere aggregate of ethnicity and poetry, but like chemical reaction, the descriptor for its behavior under certain pressures, temperatures, and elements. Elusive and resisting confinement, and therefore definition, the ethnopoet is a shapeshifting figure of how racialized bodies [people of color] respond to hegemonic powers. She is, at bottom, however, a native translator, the plural-lensed subject whose loyalty is only to the imagination of a different world, one whose survival is not contingent upon her exploitation. The native translator’s constant re-calibrations of oppressive power apparatuses seem taxing at best, and near-impossible, at worst. To effectively navigate through these polarized loci, she must identify ideologies that in turn seek “affective liberatory sances” in relation to the dominant social order (43). In a kind of performative contradiction, she must marshall the knowledge necessary to “break with ideology” while speaking within it. Chicana Studies scholar, Chela Sandoval, describes this dual movement as “meta-ideologizing”: the appropriation of hegemonic ideological forms in order to transform them (82). Nuestros padres se subieron encima de La Bestia, y por eso somos pasageros a ese tren. Y ya, dentro su pansa, tenemos que ser vigilantes cuando plantamos las bombas. In Methodology of the Oppressed, Sandoval schematizes this oppositional consciousness around five principle categories: “equal rights,” “revolutionary,” “supremacist,” “separatist,” and “differential.” Taken by themselves, the first four modes appear mutually exclusive, incapable of occupying the same plane, until a fifth pillar emerges. Cinematographic in nature, differential consciousness, as Sandoval defines it, is “a kinetic motion that maneuvers, poetically transfigures, and orchestrates while demanding alienation, perversion, and reformation in both spectators and practitioners” (44). For Sandoval, then, differential consciousness is a methodology that privileges an incredible sense mobility, one reaching artistic sensibilities. Our fourth and final analytic of movement serves an apt example of this dual meaning. Lexically speaking, ‘movement’ may be regarded as a political mobilization of aggrieved populations (through sustained efforts), or the process of moving objects (people or otherwise) from one location to another. Praxis-wise, it is both action and ideal, content and form. Thus, an ethnic poetics must be regarded less as a series of stanzas, shortened lyric, or even arrangement of language, but as a lens through which peripheralized peoples kaleidecope ideological positions in an “original, eccentric, and queer sight” (43). Taking note of the advantages of postponing identifications, the thesis stands its ground on the term ethnopoet. Its abstraction is not dewey-eyed philosophy, but an anticipation of poetic justice, of what’s to come from callused hands. This thesis is divided into 7.5 chapters. The first maps out the ethnopoet’s cartographies of struggle. By revisiting that alleged Tío Tomas, Richard Rodriguez, we unearth the tensions that negatively, deny citizenship to one silo, but on the flipside, engender manifold ways of seeing, hearing, and moving . The second, through George Jackson’s prison memoirs, pans out from this ethnography of power, groping for an apparatus that feigns an impervious prestige: ‘the aesthetic regime of coercion.’ In half-way cut, the thesis sidesteps to spic into existence, formally announcing, through Aime Cesaire, myself, and Pedro Pietri, the poeticization of trauma. Such uplift denies New Age transcendence of self, but a rehearsal of our entrapment in these mortal envelopes. Thirdly, conscious of the bleeding ethnic body, we cut open the incipient corpse to observe her pathologist. Her native autopsies offer the ethnic body’s posthumous recognition, the ethnopoetics ability to speak for and through the dead. Chapter five examines prolific black artists—Beyonce and Kendrick Lamar—to elide the circumvention of their consumption via invoking radical black hi/her-stories, ones fragmenting the black body. Sixth, the paper compares the Black Power Salute of the 1968 Mexico City Olympics to Duke’s Mi Gente Boycott of their Latino Student Recruitment Weekend. Both wielded “silent gestures,” that shrewdly interfered with white noise of numbed negligence. Finally, ‘taking the mask off’ that are her functionalities, the CODA expounds on ethnopoet’s interiority, particularly after the rapid re-calibration of her politics. Through a rerun of El Chavo del Ocho, one of Mexican television’s most cherished shows, we tune into the heart-breaking indigence of barrio residents, only to marvel at the power of humor to, as Friday’s John Witherspoon put it, “fight another day.” This thesis is the tip of my tongue. Y por una vez, déjala que cante.

Formation of sub-7 nm feature size PS-b-P4VP block copolymer structures by solvent vapour process

The nanometer range structure produced by thin films of diblock copolymers makes them a great of interest as templates for the microelectronics industry. We investigated the effect of annealing solvents and/or mixture of the solvents in case of symmetric Poly (styrene-block-4vinylpyridine) (PS-b-P4VP) diblock copolymer to get the desired line patterns. In this paper, we used different molecular weights PS-b-P4VP to demonstrate the scalability of such high χ BCP system which requires precise fine-tuning of interfacial energies achieved by surface treatment and that improves the wetting property, ordering, and minimizes defect densities. Bare Silicon Substrates were also modified with polystyrene brush and ethylene glycol self-assembled monolayer in a simple quick reproducible way. Also, a novel and simple in situ hard mask technique was used to generate sub-7nm Iron oxide nanowires with a high aspect ratio on Silicon substrate, which can be used to develop silicon nanowires post pattern transfer.

Using Coding to Improve Localization and Backscatter Communication Performance in Low-Power Sensor Networks

Backscatter communication is an emerging wireless technology that recently has gained an increase in attention from both academic and industry circles. The key innovation of the technology is the ability of ultra-low power devices to utilize nearby existing radio signals to communicate. As there is no need to generate their own energetic radio signal, the devices can benefit from a simple design, are very inexpensive and are extremely energy efficient compared with traditional wireless communication. These benefits have made backscatter communication a desirable candidate for distributed wireless sensor network applications with energy constraints.

The backscatter channel presents a unique set of challenges. Unlike a conventional one-way communication (in which the information source is also the energy source), the backscatter channel experiences strong self-interference and spread Doppler clutter that mask the information-bearing (modulated) signal scattered from the device. Both of these sources of interference arise from the scattering of the transmitted signal off of objects, both stationary and moving, in the environment. Additionally, the measurement of the location of the backscatter device is negatively affected by both the clutter and the modulation of the signal return.

This work proposes a channel coding framework for the backscatter channel consisting of a bi-static transmitter/receiver pair and a quasi-cooperative transponder. It proposes to use run-length limited coding to mitigate the background self-interference and spread-Doppler clutter with only a small decrease in communication rate. The proposed method applies to both binary phase-shift keying (BPSK) and quadrature-amplitude modulation (QAM) scheme and provides an increase in rate by up to a factor of two compared with previous methods.

Additionally, this work analyzes the use of frequency modulation and bi-phase waveform coding for the transmitted (interrogating) waveform for high precision range estimation of the transponder location. Compared to previous methods, optimal lower range sidelobes are achieved. Moreover, since both the transmitted (interrogating) waveform coding and transponder communication coding result in instantaneous phase modulation of the signal, cross-interference between localization and communication tasks exists. Phase discriminating algorithm is proposed to make it possible to separate the waveform coding from the communication coding, upon reception, and achieve localization with increased signal energy by up to 3 dB compared with previous reported results.

The joint communication-localization framework also enables a low-complexity receiver design because the same radio is used both for localization and communication.

Simulations comparing the performance of different codes corroborate the theoretical results and offer possible trade-off between information rate and clutter mitigation as well as a trade-off between choice of waveform-channel coding pairs. Experimental results from a brass-board microwave system in an indoor environment are also presented and discussed.

Fabrication of sub-10 nm lamellar structures by solvent vapour annealing of block copolymers

Fabrication of nanoscale patterns through the bottom-up approach of self-assembly of phase-separated block copolymers (BCP) holds promise for nanoelectronics applications. For lithographic applications, it is useful to vary the morphology of BCPs by monitoring various parameters to make “from lab to fab” a reality. Here I report on the solvent annealing studies of lamellae forming polystyrene-blockpoly( 4-vinylpyridine) (PS-b-P4VP). The high Flory-Huggins parameter (χ = 0.34) of PS-b-P4VP makes it an ideal BCP system for self-assembly and template fabrication in comparison to other BCPs. Different molecular weights of symmetric PS-b-P4VP BCPs forming lamellae patterns were used to produce nanostructured thin films by spin-coating from mixture of toluene and tetrahydrofuran(THF). In particular, the morphology change from micellar structures to well-defined microphase separated arrangements is observed. Solvent annealing provides a better alternative to thermal treatment which often requires long annealing periods. The choice of solvent (single and dual solvent exposure) and the solvent annealing conditions have significant effects on the morphology of films and it was found that a block neutral solvent was required to realize vertically aligned PS and P4VP lamellae. Here, we have followed the formation of microdomain structures with time development at different temperatures by atomic force microscopy (AFM). The highly mobilized chains phase separate quickly due to high Flory-Huggins (χ) parameter. Ultra-small feature size (~10 nm pitch size) nanopatterns were fabricated by using low molecular weight PSb- P4VP (PS and P4VP blocks of 3.3 and 3.1 kg mol-1 respectively). However, due to the low etch contrast between the blocks, pattern transfer of the BCP mask is very challenging. To overcome the etch contrast problem, a novel and simple in-situ hard mask technology is used to fabricate the high aspect ratio silicon nanowires. The lamellar structures formed after self-assembly of phase separated PS-b-P4VP BCPs were used to fabricate iron oxide nanowires which acted as hard mask material to facilitate the pattern transfer into silicon and forming silicon nanostructures. The semiconductor and optical industries have shown significant interest in two dimensional (2D) molybdenum disulphide (MoS2) as a potential device material due to its low band gap and high mobility. However, current methods for its synthesis are not ‘fab’ friendly and require harsh environments and processes. Here, I also report a novel method to prepare MoS2 layered structures via self-assembly of a PS-b-P4VP block copolymer system. The formation of the layered MoS2 was confirmed by XPS, Raman spectroscopy and high resolution transmission electron microscopy.

Design, fabrication and characterization of resonant waveguide grating based optical biosensors

The absence of rapid, low cost and highly sensitive biodetection platform has hindered the implementation of next generation cheap and early stage clinical or home based point-of-care diagnostics. Label-free optical biosensing with high sensitivity, throughput, compactness, and low cost, plays an important role to resolve these diagnostic challenges and pushes the detection limit down to single molecule. Optical nanostructures, specifically the resonant waveguide grating (RWG) and nano-ribbon cavity based biodetection are promising in this context. The main element of this dissertation is design, fabrication and characterization of RWG sensors for different spectral regions (e.g. visible, near infrared) for use in label-free optical biosensing and also to explore different RWG parameters to maximize sensitivity and increase detection accuracy. Design and fabrication of the waveguide embedded resonant nano-cavity are also studied. Multi-parametric analyses were done using customized optical simulator to understand the operational principle of these sensors and more important the relationship between the physical design parameters and sensor sensitivities. Silicon nitride (SixNy) is a useful waveguide material because of its wide transparency across the whole infrared, visible and part of UV spectrum, and comparatively higher refractive index than glass substrate. SixNy based RWGs on glass substrate are designed and fabricated applying both electron beam lithography and low cost nano-imprint lithography techniques. A Chromium hard mask aided nano-fabrication technique is developed for making very high aspect ratio optical nano-structure on glass substrate. An aspect ratio of 10 for very narrow (~60 nm wide) grating lines is achieved which is the highest presented so far. The fabricated RWG sensors are characterized for both bulk (183.3 nm/RIU) and surface sensitivity (0.21nm/nm-layer), and then used for successful detection of Immunoglobulin-G (IgG) antibodies and antigen (~1μg/ml) both in buffer and serum. Widely used optical biosensors like surface plasmon resonance and optical microcavities are limited in the separation of bulk response from the surface binding events which is crucial for ultralow biosensing application with thermal or other perturbations. A RWG based dual resonance approach is proposed and verified by controlled experiments for separating the response of bulk and surface sensitivity. The dual resonance approach gives sensitivity ratio of 9.4 whereas the competitive polarization based approach can offer only 2.5. The improved performance of the dual resonance approach would help reducing probability of false reading in precise bio-assay experiments where thermal variations are probable like portable diagnostics.

Major ion chemistry of snow cores along a transect in central Dronning Maud Land, Antarctica

Among the large variety of particulates in the atmosphere, calcic mineral dust particles have highly reactive surfaces that undergo heterogeneous reactions with nitrogen oxides contiguously. The association between Ca2+, an important proxy indicator of mineral dust and NO3-, a dominant anion in the Antarctic snow pack was analysed. A total of 41 snow cores (~ 1 m each) that represent snow deposited during 2008-2009 were studied along coastal-inland transects from two different regions - the Princess Elizabeth Land (PEL) and central Dronning Maud Land (cDML) in East Antarctica. Correlation statistics showed a strong association (at 99 % significance level) between NO3- and Ca2+ at the near-coastal sections of both PEL (r = 0.72) and cDML (r = 0.76) transects. Similarly, a strong association between these ions was also observed in snow deposits at the inland sections of PEL (r = 0.8) and cDML (r = 0.85). Such systematic associations between Ca2+ and NO3- is attributed to the interaction between calcic mineral dust and nitrogen oxides in the atmosphere, leading to the possible formation of calcium nitrate (Ca(NO3)2). Forward and back trajectory analyses using HYSPLIT model v. 4 revealed that Southern South America (SSA) was an important dust emitting source to the study region, aided by the westerlies. Particle size distribution showed that over 90 % of the dust was in the range < 4 µm, indicating that these dust particles reached the Antarctic region via long range transport from the SSA region. We propose that the association between Ca2+ and NO3- occurs during the long range transport due to the formation of Ca(NO3)2. The Ca(NO3)2 thus formed in the atmosphere undergo deposition over Antarctica under the influence of anticyclonic polar easterlies. However, influence of local dust sources from the nunataks in cDML evidently mask such association in the mountainous region. The study indicates that the input of dust-bound NO3- may contribute a significant fraction of the total NO3- deposited in Antarctic snow.

Antarctic ice sheet topography, cavity geometry, and global bathymetry (RTopo 1.0.5-beta)

Sub-ice shelf circulation and freezing/melting rates in ocean general circulation models depend critically on an accurate and consistent representation of cavity geometry. Existing global or pan-Antarctic data sets have turned out to contain various inconsistencies and inaccuracies. The goal of this work is to compile independent regional fields into a global data set. We use the S-2004 global 1-minute bathymetry as the backbone and add an improved version of the BEDMAP topography for an area that roughly coincides with the Antarctic continental shelf. Locations of the merging line have been carefully adjusted in order to get the best out of each data set. High-resolution gridded data for upper and lower ice surface topography and cavity geometry of the Amery, Fimbul, Filchner-Ronne, Larsen C and George VI Ice Shelves, and for Pine Island Glacier have been carefully merged into the ambient ice and ocean topographies. Multibeam survey data for bathymetry in the former Larsen B cavity and the southeastern Bellingshausen Sea have been obtained from the data centers of Alfred Wegener Institute (AWI), British Antarctic Survey (BAS) and Lamont-Doherty Earth Observatory (LDEO), gridded, and again carefully merged into the existing bathymetry map. The global 1-minute dataset (RTopo-1 Version 1.0.5) has been split into two netCDF files. The first contains digital maps for global bedrock topography, ice bottom topography, and surface elevation. The second contains the auxiliary maps for data sources and the surface type mask. A regional subset that covers all variables for the region south of 50 deg S is also available in netCDF format. Datasets for the locations of grounding and coast lines are provided in ASCII format.

‘Learning to be Zen’: Women travellers and the imperative to happy

This paper follows the emotional management of lone, independent women travellers as they move through tourist spaces, based on my doctoral research Embodiment and Emotion in the experiences of independent women tourists (2012). Specifically, this paper will focus on ‘gendering happiness’ by arguing that women travellers are significantly compelled to feel and display characteristics of happiness, humour and ‘learning to be Zen’ in order to be successful travellers. The imperative to become, and remain, happy and humorous in the face of embodied, emotional and gendered constraints is a key feature of women’s reflections of their travelling experiences, mirroring the recent emergence of literature into happiness and positive thinking within feminist theory (Ehrenreich 2010, Ahmed 2010). Negotiating ‘bad’ emotions provides a powerful insight into the perceptions of women travellers; to remain happy can mask problematic power relations and other forms of resistance. This is not to say that emotional negotiation is not partly a form of effective resistance, rather, I wish to make room for the freedom to be unhappy and angry in travelling space without feeling failure for not achieving a successful travelling identity.

El oráculo griego en la época de la producibilidad escrita: la crisis de la autoridad mántica en "Aves" (960-996) de Aristófanes

Este artículo se propone analizar la escena del cresmólogo intruso en Aves, revalorizando la comedia aristofánica como fuente de conocimiento histórico. Este análisis se centra en la práctica oracular como una técnica de producción escrita vinculada a la autoridad religiosa. De esta manera, se exploran dos campos de estudios, como la comedia antigua y la adivinación griega, cuyo vínculo no ha sido explorado en profundidad. Para dar cuenta del momento crítico de la institución oracular durante la Guerra del Peloponeso, se reconstruyen perspectivas sobre dicho fenómeno en otras fuentes como Tucídides o Demóstenes. Esto no solo ofrece una mirada «cómica» sobre la adivinación, sino que también permite comprender la práctica oracular como técnica y, en consecuencia, qué elementos de su funcionamiento podían ser manipulados.

A boron nitride - graphene - C60 heterostructure

We have fabricated a new van-der-Waals heterostructure composed by BN/graphene/C60. We performed transport measurements on the preliminary BN/graphene device finding a sharp Dirac point at the neutrality point. After the deposition of a C60 thin film by thermal evaporation, we have observed a significant n-doping of the heterostructure. This suggests an unusual electron transfer from C60 into the BN/graphene structure. This BN/graphene/C60 heterostructure can be of interest in photovoltaic applications. It can be used to build devices like p-n junctions, where C60 can be easily deposited in defined regions of a graphene junction by the use of a shadow mask. Our results are contrasted with theoretical calculations.

RECQ5 promotes recombination and mutagenesis at targeted nicks through disruption of RAD51 filaments

Thesis (Ph.D.)--University of Washington, 2016-08

An Interdisciplinary Approach to the Management of Vocal Cord Dysfunction in an Elite Female Swimmer: a Case Study

Acute pulmonary disorders are commonplace within the athletic population, with exercise induced bronchoconstriction (EIB), and vocal cord dysfunction (VCD) common diagnoses. VCD is a condition that causes the adduction of the vocal folds during inhalation, causing obstruction at the larynx and thereby a severely impaired sporting performance. VCD can be brought on by laryngeal irritants, emotional and psychological stress and asthma. The gold standard of treatment for VCD centres on an interdisciplinary approach from specialists that often include a respiratory consultant, speech and language therapist (SLT) and a psychologist. The present case study details the interdisciplinary approach to the treatment of an elite female swimmer with VCD with an intervention programme that lasted nine weeks, instigated by a local general practitioner (G.P.) who chose to engage a Sport Psychology Consultant (SPC) due to the sport-specific nature of the psychological stress experienced by the individual. The steps involved in the design of the sport psychology interventions are outlined and the relationship of those interventions to the work of the other specialists is discussed. The 9 week intervention programme was aimed at reducing perfectionist tendencies and competitive state anxiety using a combination of cognitive behavioural therapy (CBT), goal-setting and imagery. Overall, the treatment programme was deemed a success as perfectionism and competitive state anxiety levels reduced over time along with the frequency of VCD occurrence. This case study demonstrates the breadth of roles that can be undertaken by a SPC and raises awareness of a complex respiratory disorder that is not yet fully understood.

Performance en fluage des assemblages antiglissement avec des surfaces métallisées dans les ponts en acier

Les éléments des ponts en acier sont exposés à de sévères conditions environnementales, tel l’épandage de sels déglaçant sur les routes. Ces éléments ont besoin d’un niveau suffisant de protection contre la corrosion afin de préserver leur intégrité à long terme. Une solution efficace, devenue populaire au Canada, est la métallisation. La métallisation est un revêtement anticorrosion formé par projection thermique de métal, généralement du zinc, sur la surface à protéger. La protection fournie au substrat d’acier est assurée par une barrière physique et une protection galvanique. Pour le calcul des assemblages boulonnés antiglissement, les codes de conception, tel le code Canadien sur le calcul des ponts routiers CAN/CSA S6-14, spécifient, en fonction des conditions des surfaces de contact désirées, un coefficient de glissement à utiliser. Actuellement, ces codes ne fournissent aucun coefficient de glissement entre deux surfaces métallisées. Donc, il est pratique courante pour les fabricants de ponts en acier de masquer les surfaces de contact des joints boulonnés avant de métalliser, ce qui est très couteux pour l’industrie puisque ce travail doit se faire manuellement. Récemment, des études ont évalué la résistance au glissement à court terme d’assemblages antiglissement ayant des surfaces de contact métallisées. Les résultats ont révélé une résistance au glissement supérieure aux assemblages sur acier nu grenaillés. Dans la présente recherche, la performance en fluage des assemblages antiglissement métallisés a été caractérisée pour s’assurer qu’une résistance en glissement de Classe B soit toujours valide à long terme. L’effet de la relaxation de la force de serrage sur la charge de glissement a aussi été évalué. Les résultats ont démontré une bonne performance en fluage. Aussi, les résultats ont révélé que la relaxation de la force de serrage n’a pas d’impact significatif sur la résistance au glissement des assemblages antiglissement métallisés. Les conclusions de cette étude pourraient bien influencer de futures révisions des codes de conception et avoir un impact sur l’industrie de l’acier en Amérique du Nord.Mots clés : Assemblage boulonné antiglissement, métallisation, pont routier en acier, fluage, relaxation