Qualidade fisiológica de sementes de pepino cv. pérola, em função da idade e do tempo de repouso pós-colheita dos frutos

This work was carried out at the Fazenda Experimental Lageado, at Botucatu, SP, to evaluate the physiological quality of cucumber (Cucumis sativus L.), seeds harvested at different fruit maturity stages and post-harvest resting periods. Fruits of cultivar Pérola were harvested at 6 ages (20, 25, 30, 35, 40 and 45 days after anthesis) and they were stored at room temperature for 0, 5, 10 or 15 days before seed extraction. After this, seeds were fermented for 2 days, washed and dried. External visual characteristics of fruits and seeds were observed at harvest. Seed quality was evaluated as for moisture, dry matter content, dimensions, germination, and vigour. Results showed that seed germination and vigour increased in fruits aging from 20 to 40 days. Post-harvest periods improved seed quality of 20-day old fruits not reaching the seed quality levels observed in 40 or 45-day old fruits, without post-harvest resting period. Seeds from fruits at 25, 30 and 35 days of age, with 10 or 15 days of post-harvest resting period reached the same quality levels of seeds from fruits with 40-45 days old.

Efeitos da idade dos frutos, método e condição de secagem sobre a qualidade de sementes de quiabeiro. II. Cultivar Amarelinho

Fruits of okra (Abelmoschus esculentus (L.) Moench.) cv. Amarelinho were harvested at three times: 35, 45 and 55 days after anthesis. Half part of the fruits of each harvest time was shelled and the seeds were dried in natural environment of laboratory or in dry chamber. The other half was dried unshelled in the same two conditions. Water contents of seeds were evaluated at harvest time and before the germination test, that was carried out when the seeds were in hygroscopic equilibrium with the two environments. The physiological quality of seeds was affected by the interaction effects of fruit age, drying method and drying condition. The highest values for percentage of germination were obtained from seeds taken from fruits 55 days old (up to 92%) and the hard seeds percentage was not affected by drying method and drying condition. The seeds from fruits of 35 and 45 days old had the germination percentage increased when dried inside the fruit in natural environment.

Eficiência de absorção e utilização de potãssio por plantas de soja em solução nutritiva

A greenhouse experiment was conducted in a factorial design of randomized complete blocks, with three replications, to study plantage response of soybean cultivars on efficiency: update (EAB); conversion (EC) and utilization, as well as utilization index (IU) by soybean cultivars. Four soybean cultivars (IAC 17, IAC 18, IAC 11 e FT 2) were grown in nutrient solutions with either adequate or deficient K levels (0.5 and 1.82 mmol. L-1) and harvested 20, 40 and 60 days after plant emergence (DAPE). The plants were separated in top, median and lower leaves, stems and roots, dried, ground and analyzed for K contents. Regardless of cultivar, in deficient plants K was translocated from the other organs to median leaves, in order to maintain its K contents. This behavior was particularly evident in 'IAC 11' and 'IAC 18'. Well nourished plants showed higher EAB than deficient plants. 'IAC 17' and 'IAC 18' showed higher EAB at either adequate or deficient K. levels. 'FT 2' showed highest EUK in deficient solutions at 40 DAPE (immediately before flowering), and the lowest EUK at 60 DAPE. The utilization index was helpful in determining cultivar plasticity to adapt to K deficiency. The highest plasticity was observed for 'FT 2' at 40 DAPE and for 'IAC 18' at 60 DAPE. K-deficient plants were more efficient in EC, yielding more dry matter for K uptake unit.

Study of Hybrid Silica-Polyethyleneglycol Xerogels by Eu3+ Luminescence Spectroscopy

Good optical quality Eu3+-doped silica-polyethyleneglycol hybrids were prepared by the sol-gel process. Thermomechanical analysis showed an increase of the glass transition temperature, due to the stiffness of the polymeric network, as the amount of Eu3+ increased. Europium luminescent properties were used to study structural evolution during the sol-gel transition. For lower doping concentrations dried gels present statistical distributions of Eu3+, typical of an amorphous environment, while for higher concentrations a crystalline-like environment of Eu3+ was observed. A broad emission band was observed in the visible part of the electromagnetic spectrum and assigned to the intrinsic emission from the hybrid polymeric network.

Influence of different drying temperatures on the amount of essential oils and citral content in Cymbopogon citratus (DC) Stapf. - Poaceae

Studies were conducted to show the effect of different temperatures in the drying process on the amount and quality of essential oils of Cymbopogon citratus (DC) Stapf. Leaves were harvested in the experimental field of the Agronomical Sciences College, UNESP, Botucatu, SP, Brazil in September, 1996. Blades of the leaves were cut in small parts (about 1-1,5 cm length), dried for several days at 30°, 50°, 70° and 90°C, until establishment of the weights. In the following process a hydrodistillation, during 2.5 hours, by Clevenger apparatus, was subsidized to extract the essential oils. A higher amount of oil could clearly be collected with the lower drying temperatures, except at 30°C, affected by fungus growing. Aspergillus sp., Penicillium sp., Rhyzopus sp., Cladosporium sp., Trichoderma sp. and Alternaria sp. were observed in the leaves. The analysis of the oil by GC-MS showed the variation of citral concentration of the treatments (86,1 to 95,2%). The results proved it is worthwhile to spend more time and effort in the production process using longer times of careful drying.

Desiccation tolerance of four seedlots from Euterpe edulis Mart.

In order to identify the desiccation tolerance of E. edulis seeds, four fruitlots were collected from the Campinas Agronomic Institute Palmae collection, located at Ubatuba, state of Sao Paulo, Brazil, and taken in moisture-proof containers to the College of Agriculture in Botucatu, state of Sao Paulo. There, the fruits were shelled and the seeds were dried, either under silica gel conditions or in a drying chamber. The effects of dehydration were evaluated by measurements of the germination, embryo protrusion, germinative button, plumule, speed of emergence, seedling length, seed dry matter and water content. Differences among seedlots and between harvest season for most of the traits were observed. Euterpe edulis seedlots seem to tolerate water content reductions until 39% without significant reduction in germination and vigor. Below this value, most of the evaluated traits were negatively affected. Total loss of germination was observed whenever seed water content was reduced to values below 21%.

Chromium-containing silica materials

Chromium-containing silica samples were obtained from soluble sodium silicate solutions in the presence of different chromium nitrate concentrations. Precipitation was carried out in ethanolic media. Gel precipitate was dried by liophylization and samples measured by transmission electron microscopy (TEM), X-ray energy-dispersive spectrometer, X-ray mapping, X-ray photoemission spectroscopy (XPS), and particle size analysis. Spherical chromium containing silica particles with 3.5% and 4.8% (at.%) of chromium were obtained. Particle size analysis results showed that with increased addition of chromium in sodium silicate solutions produces agglomerates whose sizes range from 1 to 0.2 μm. Chromium mapping and XPS results show that chromium oxide is preferentially segregated on particle surfaces. Chromium oxide was detected on particle surface with a binding energy of 576.77 ± 0.05 eV as obtained from XPS analysis. During the hydrolysis and condensation processes chromium oxide precipitates on the silica surface and it affects the silica chain size. © 2000 Elsevier Science B.V. All rights reserved.

Use of one-bottle adhesive as an intermediate bonding layer to reduce sealant microleakage on saliva-contaminated enamel

Purpose: To evaluate the influence of three different adhesives, each used as an intermediary layer, on microleakage of sealants applied under condition of salivary contamination. Materials and Methods: Six different experimental conditions were compared, 3 with adhesives and 3 without. After prophylaxis and acid etching of enamel, salivary contamination was placed for 10 s. In Group SC the sealant was applied after saliva without bonding agent and then light-cured. In Group SCA, after saliva, the surface was air dried, and then the sealant was applied and cured. In Groups ScB, SB and PB, a bonding agent (Scotchbond Dual Cure/3M, Single Bond/3M and Prime & Bond 2.1/Dentsply, respectively) was applied after the saliva and prior to the sealant application and curing. After storage in distilled water at 37°C for 24 hrs, the teeth were submitted to 500 thermal cycles (5°C and 55°C), and silver nitrate was used as a leakage tracer. Leakage data were collected on cross sections as percentage of total enamel-sealant interface length. Representative samples were evaluated under SEM. Results: Sealants placed on contaminated enamel with no bonding agent showed extensive microleakage (94.27% in SC; 42.65% in SCA). The SEM revealed gaps as wide as 20 μm in areas where silver nitrate leakage could be visualized. In contrast, all bonding agent groups showed leakage less than 6.9%. Placement of sealant with a dentin-bonding agent on contaminated enamel significantly reduced microleakage (P< 0.0001). The use of a bonding agent as an intermediary layer between enamel and sealant significantly reduced saliva's effect on sealant microleakage.

Seasonal variation in coumarin content of Mikania glomerata

Mikania glomerata Spengal extract contains approximately 0.5 percent of coumarin, a substance that displays anti-inflammatory and expectoratory activities. Extracts from different young leaves of plants collected during the early evening of December and July contained the highest levels coumarin. Plants dried in oven with circulating air contained 7.3 mg of coumarin/g of dry weight, demonstrating that this was the most appropriate drying condition for Mikania glomerata.

Drying temperature effects in peppermint essential oil content and composition

Studies were conducted to show the effect of different temperatures in the drying process on the amount and quality of essential oils of peppermint (Mentha piperita L.) The leaves were harvested in the Demeter Farmer, Botucatu, SP, Brazil in december, 1997. The leaves were dried at 40°C, 60°C and 80°C, until establishment of the weights. The essential oil was extracted by destilation in Clevenger apparatus and analysed by GC-MS. Higher drying temperature sharply decreased the essential oil content (% v/w) from 1.0% (40°C) to 0.14% (60°C) and 0.12% (80°C). Higher drying temperatures also affected the composition, decreasing the contents of 1,8 cineol and citronelal until 80°C, and increasing the contents of menthol and neomenthol until 60°C.

Nanoparticles of La1-xSrxMnO3 compounds

A nanoparticles of La1-xSrxMnO3 were synthesized using homogenous coprecipitation method. The precipate was washed with water and dried at 80 °C. The samples were characterized by X-ray powder diffraction, transmission electron microscopy (TEM) and electrical resistivity as a function of temperature. The TEM results show that the particle size is in the nanometer scale.

Efeito do Tratamento com Hidróxido de Sódio sobre a Fração Fibrosa, Digestibilidade e Tanino do Feno de Jurema-Preta (Mimosa tenuiflora. Wild)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fecundity of the mangrove crab Ucides cordatus (Linnaeus, 1763) (Brachyura, Ocypodidae)

Females of the mangrove crab Ucides cordatus were collected in a monthly basis along a 2-year period at the mangrove areas of Iguape, SP, Brazil. Ovigerous individuals were measured (CW, carapace width) and weighed (WW, wet weight). Each brood was weighed (WWE, wet weight of eggs), dried (DWE, dry weight of eggs) and the number of eggs (EN) was recorded. Scatter plots for the relationships EN/CW, EN/WW and EN/WWE were produced, and the data were subjected to regression analysis. Relative average fecundity (F 1) was calculated in different seasons and compared to verify if there were any temporal variation of reproductive intensity. Fecundity in U. cordatus varied from 36.081 to 250.566 eggs according to the size-dependent relationship EN = 15.27CW 2.24 (N = 66; R 2 = 0.69; p<0.001). The other expressions obtained for the relationships were: EN = 3797.6WW 0.813 (N = 56; R 2 = 0.72; p<0.001); EN = 29226WWE 0.775 (N = 54; R 2 = 0.70; p<0.001); and EN = 1093586DWE 0.769 (N = 66; R 2 = 0.86; p<0.001). Ovigerous females were found only during spring and summer, and relative average fecundity differed between these seasons. Relative average fecundity was higher in spring and relative frequency of ovigerous females was higher during summer. Overall reproductive intensity was similar between these seasons. The observed trends are regarded to be related to temperature and photoperiod variations.

Effects of bleaching with carbamide peroxide gels on microhardness of restoration materials

The objective of this in vitro study was to quantitatively assess the effects of bleaching with 10 and 15% carbamide peroxide (CP) on restoration materials by performing superficial microhardness analysis. Acrylic cylindrical containers (4 x 2 mm) were filled with the following restoration products: Charisma (Heraues Kulzer, Vila Santa Catarina, São Paulo, Brazil), Durafill VS (Heraeus Kulzer), Vitremer (3M, Sumaré, São Paulo, Brazil), Dyract (Dentsply, Petrópolis, Rio de Janeiro, Brazil), and Permite C (SDI, São Pauio, São Paulo, Brazil). Sixty samples were prepared of each restoration material. Twenty samples received bleaching treatment with 10% CP, 20 samples received bleaching treatment with 15% CP, and 20 samples were kept submerged in artificial saliva, which was replaced daily. The treatment consisted of immersion of the specimens in 1 cm3 of CP at 10 and 15% for 6 hours per day during 3 weeks, whereupon the test specimens were washed, dried, and kept immersed in artificial saliva for 18 hours. Then the test and control specimens were analyzed using a microhardness gauge. The Knoop Hardness Number (KHN) was taken for each test and control specimen at five different locations by applying a 25 g force for 20 seconds. The values obtained were transformed into KHNs and the mean was calculated. The data were submitted to statistical analysis by analysis of variance and Tukey test, p < .05. The means/standard deviations were as follows: Charisma: CP 10% 38.52/4.08, CP 15% 34.31/6.13, saliva 37.36/4.48; Durafill VS: CP 10% 18.65/1.65, CP 15% 19.38/2.23, saliva 18.27/1.43; Dyract AP: CP 10% 30.26/2.81, CP 15% 28.64/5.44, saliva 33.88/3.46; Vitremer: CP 10% 28.15/3.04, CP 15% 17.40/3.11, saliva 40.93/4.18; and Permite C: CP 10% 183.50/27.09, CP 15% 159.45/5.78, saliva 215.80/26.15. A decrease in microhardness was observed for the materials Dyract AP, Vitremer, and Permite C after treatment with CP at 10 and 15%, whereas no effect on either of the two composites (Charisma and Durafill) was verified. CLINICAL SIGNIFICANCE: The application of the carbamide peroxide gels at 10 and 15% did not alter the microhardness of the composite resins Charisma and Durafill. In situ and clinical studies are necessary to enable one to conclude that the reduction in microhardness of the materials effectively results in clinical harm to the restorations.

Matéria seca, concentração e acúmulo de nutrientes em mudas de Eucalyptus grandis em função da idade

E grandis seedlings of Bofete progeny, cultivated in nurseries of Eucatex Florestal, were collected at ages of 55, 69, 83, and 97 days, separated into leaves, stem, and roots. The seedlings were then placed in identified paper bags, and oven-dried until weight became constant. They were then weighed and chemically analyzed for the determinate of dry matter production, concentrations and accumulation of N, P, K, Ca, Mg, S, B, Cu, Fe, Mn, and Zn in the several seedling ages. The distribution of total dry matter weight complied with the following descending order: leaf > stem > roots. Conversely to expectations, the highest concentrations of nutrients occurred in leaves for N and Mn only. Seedling hardened process resulted in N and S deficiency. The sequence of macronutrient concentration in seedlings at the time of shipment was the following: leaf > root > stem for N; root = stem > leaf for P; leaf = root = stem for K; stem > root > leaf for Ca; root > leaf > stem for Mg and S. All macronutrient concentrations in organs decreased with age, except for Ca. Concentrations of Cu, Fe, and Zn in all seedling specimens decreased with age. The sequence of micronutrient concentrations in seedling specimens at the time of shipment was the following: root >stem = leaf for B; root > stem > leaf for Cu and Fe; root > leaf > stem for Zn, and leaf > stem > root for Mn. At the time of shipment, at 97 days of age, K was the most extracted macronutrient of all, followed in a descending order by Ca, N, Mg, P, and e S. At the end of the seedling production rotation, Mn was the most extracted micronutrient, followed by Fe, Zn, Cu, and B.