An account of new developmentalism and its structuralist macroeconomics

This is a personal account of the definition of "new developmentalism" - a national development strategy alternative to the Washington consensus -, and of a "structuralist development macroeconomics": the sum of models that justifies theoretically that strategy. It is personal account of a collective work involving Keynesian, institutionalist and structuralist economists in Brazil that are forming a new school of thought in Brazil: a Keynesian-structuralist school. It is Keynesian because it emphasizes the demand side or the investment opportunities' side of economic growth. It is institutionalist because institutions obviously matter in achieving growth and stability. It is structuralist because it defines economic development as a structural change from low to high value added per capita industries and because it is based on two structural tendencies that limit investment opportunities: the tendency of wages to grow below productivity and the tendency to the cyclical overvaluation of the exchange rate.

Natural freeze crystallization : purification of aqueous Na2SO4 solutions with cold air

The aim of this thesis was to examine efficiency of freeze crystallization and eutectic freeze crystallization in purification of wastewater by imitating natural freezing. In addition, a mathematic model based on heat transfer to determine ice thickness and ice growth rate was examined. Also, the amount of sodium sulfate crystallized at the eutectic point was under investigation. In literature part, advantages and applications of the freeze crystallization are discussed, and possibility to apply it in Northern hemisphere winter weather conditions is under study. Furthermore, main sources of sodium sulfate from Finnish industries are described. The experiments were carried out in modified chest freezer, where a fan was placed in order to obtain laminar air flow inside. Picolog PT-104 data logger was used to monitor temperature changes in the salt-water solution, and constant temperature was maintained in the crystallizer with Lauda RP 850 thermostat. The impurity of formed ice layer was determined by weighing ice samples after experiment and again after 24 hours drying to full dryness in oven. Volume of salt-water solution was also measured after experiment. The highest purity of formed ice layer was obtained with small temperature difference and with long freezing time. On the other hand, the amount of crystallized sodium sulfate was its greatest with long freezing time and higher temperature difference. The results obtained by the mathematic model and empirical results did not differ significantly in most of the experiments. However, the difference increased when salt-water mixture reached its eutectic point, leading to simultaneous ice and salt crystallization. Eutectic point was reached only with the highest salt concentration with one exception. In these cases, calculated values were in many cases greater than the experimental ones. In winter weather conditions freeze crystallization is cost-effective wastewater treatment method and rather simple. Nonetheless, the efficiency and separation rate are strongly depended on ambient temperature and its changes

Modelling the exothermic heat and the demand of cooling in paper and pulp industry biological wastewater treatment

This master thesis presents a study on the requisite cooling of an activated sludge process in paper and pulp industry. The energy consumption of paper and pulp industry and it’s wastewater treatment plant in particular is relatively high. It is therefore useful to understand the wastewater treatment process of such industries. The activated sludge process is a biological mechanism which degrades carbonaceous compounds that are present in waste. The modified activated sludge model constructed here aims to imitate the bio-kinetics of an activated sludge process. However, due to the complicated non-linear behavior of the biological process, modelling this system is laborious and intriguing. We attempt to find a system solution first using steady-state modelling of Activated Sludge Model number 1 (ASM1), approached by Euler’s method and an ordinary differential equation solver. Furthermore, an enthalpy study of paper and pulp industry’s vital pollutants was carried out and applied to revise the temperature shift over a period of time to formulate the operation of cooling water. This finding will lead to a forecast of the plant process execution in a cost-effective manner and management of effluent efficiency. The final stage of the thesis was achieved by optimizing the steady state of ASM1.

Perceptions of green branding and identity building amongst small Finnish textile producers

The textile industry is one of the most polluting industries in the world. The amount of air and water pollution it causes puts a burden on the environment. There are companies who have taken the environmental and social aspects into account in the their production and chosen to operate in a green manner. This thesis studies how the phenomenon of green branding is seen from the perspectives of small Finnish textile companies. The theory used in this thesis has to do with green branding and identity building. The theory is used to analyze the results of the empirical findings. The main research question that the thesis aims to answer is how green branding is perceived within the Finnish textile industry. In order to answer the main research question, empirical data was collected from five relevant companies within the Finnish textile industry. The companies interviewed for the study were WST, Saana ja Olli, RCM, R-collection and Tiensivu. The study was conducted as a multiple case based study where multiple experts from green companies were interviewed. The experts were all owners or employees of companies that have a so-called green brand identity. The data was collected through semi-structured interviews, where the relevant experts from each company were interviewed either by themselves, in pairs or in groups. The data that was collected for this study was primary data, and the results of the study are mainly based on the experiences and opinions of the experts interviewed. The data collected does not cover the entire green textile industry within Finland, but study does however give a fairly comprehensive view of the phenomenon, as the textile industry in Finland is quite concise. The general findings of the study show that all experts from the companies interviewed agreed that a green brand identity does benefit their company in one way or the other. The findings also show contradictions with the older theory (eg. Charter et al. 1999, Pickett et al. 1995), and perhaps give a more modern view of the thoughts within the industry.

Energy Efficiency in Electrical Drive Systems: Technical potentials, barriers and policy approaches for small and medium industries in Ghana

Today industries and commerce in Ghana are facing enormous energy challenge. The pressure is on for industries to reduce energy consumption, lower carbon emissions and provide se-cured power supply. Industrial electric motor energy efficiency improvement is one of the most important tools to reduce global warming threat and reduce electricity bills. In order to develop a strategic industrial energy efficiency policy, it is therefore necessary to study the barriers that inhibit the implementation of cost – effective energy efficiency measures and the driving forces that promote the implementation. The aim of this thesis is to analyse the energy consumption pattern of electric motors, study factors that promote or inhibit energy efficiency improvements in EMDS and provide cost – effective solutions that improve energy efficiency to bridge the existing energy efficiency gap in the surveyed industries. The results from this thesis has revealed that, the existence of low energy efficiency in motor-driven systems in the surveyed industries were due to poor maintenance practices, absence of standards, power quality issues, lack of access to capital and limited awareness to the im-portance of energy efficiency improvements in EMDS. However, based on the results pre-sented in this thesis, a policy approach towards industrial SMEs should primarily include dis-counted or free energy audit in providing the industries with the necessary information on potential energy efficiency measures, practice best motor management programmes and estab-lish a minimum energy performance standard (MEPS) for motors imported into the country. The thesis has also shown that education and capacity development programmes, financial incentives and system optimization are effective means to promote energy efficiency in elec-tric motor – driven systems in industrial SMEs in Ghana

Globalization of pharmaceutical R&D. Pharmaceutical R&D governance forms in People's Republic of China

Yrityksen selviytyminen ja menestyminen ovat riippuvaisia sen kyvystä innovoida, luoda tietoa ja hyödyntää tietämystä ja keksintöjä (Dunk ja Kilgore 2001). Yrityksen menestyminen erityisesti korkean teknologian alalla on siten suoraan riippuvainen sen T&T:stä, johon tehdyt investoinnit tuovat merkittäviä taloudellisia etuja yritykselle uusien tuotteiden, palveluiden ja prosessien muodossa (McEvily ja Chakravarthy 1999). Teknologinen etumatka ja sen tuotteistaminen innovatiivisiksi tarjoamiksi mahdollistaa monopolististen etujen saavuttamisen yrityksen kansainvälisessä kilpailussa (Lall 1977). Tämä kaltainen kilpailuetu voidaan saavuttaa yrityksen kyvyllä yhdistää maantieteellisesti hajautettu T&T:nsä tehokkaaksi verkostoksi (Porter 1986). Boehen (2008) mukaan T&T:n globalisoitumista voidaan johtaa eri hallintömuodoilla: T&T:n kansainvälistymisellä, T&T:n ulkomaille sijoittamisella ja T&T ulkomaille ulkoistamisella. T&T:n globalisoituminen on osa 2000-luvun taloudellista muutosta, ja sille on esitetty useita vaikuttavia tekijöitä, kuten kustannuserot, työvoimaresurssit, erityisosaamiskeskukset, paikallinen teknologia osaaminen ja kohdemarkkinoiden potentiaali (bardhan 2006; Norwood, ym. 2006; von Zedtwitz ja Gassmann 2002). Tutkimuksen on osoitettu eroavan tuotekehityksestä ja eri tekijöiden on osoitettu vaikuttavan niihin (von Zedtwitz ja Gassmann 2002; Leifer ja Triscari 1987). Samoin T&T on osoitettu olevan jatkumo perustavanlaatuisesta soveltavaan ja lääkekehityksen muodostavan vastaavan T&T jatkumon (Lall 1980; Iansiti 1993), jonka yksittäiset osat vaikuttavat sen hallintomuotoon. Tutkimus esittää eri tekijöitä voivan hyödyntää hallintomuodosta riippuen. Tätä tutkimusta varten tutkija haastatteli lääketeollisuuden johtajia Kiinassa vahvistaakseen tai hylätäkseen eri tekijöitä ja niiden suhdetta lääketeollisen T&T:n hallintomuotoihin. Markkinoiden todettiin olevan ensisijainen tekijä mutta myös kustannuserojen, insentiivien, työvoimaresurssien ja erityisosaamiskeskusten merkitys T&T:n globalisoitumiseen vaikuttavina tekijöinä vahvistettiin yhdessä perusvaatimusten ja riskitekijöiden kanssa. Tutkimuksessa vahvistetaan myös lääketeollisen T&T-jatkumon vaikutus ja esitetään viitekehys hallintomuodoille.

Globalization of pharmaceutical R&D Pharmaceutical R&D governance forms in People's Republic of China

Firm's survival and success, which are dependent on its ability to innovate, to create knowledge and to capitalize on inventions and know-how, is in essence directly linked to its R&D process (Dunk and Kilgore 2001). Especially in technology driven industries, such as the pharmaceuticals, there are significant positive returns to R&D investments through introduction of new or improved products and services (McEvily and Chakravarthy 1999). Technological lead and its transformation to innovative products as fruits of corporate R&D can be seen as monopolistic advantage that helps enterprises to compete in today’s market (Lall 1977). This competitive advantage can be derived from corporation's ability to integrate its activities across geographic locations (Porter 1986). According to Boehe (2008) globalization of R&D can executed with different governance forms: R&D internationalization, R&D offshoring or R&D offshore outsourcing. Globalization of R&D is intervened with the changes in global economy of the 21st century. Some studies argue for its influencing factors to be access to vast skilled labor pools and centers of excellence (Bardhan 2006). Other studies indicate the R&D cost differentials between countries to be the major expected benefit (Norwood et al. 2006). Von Zedtwitz and Gassmann (2002) presented benefits as divided to accessing markets and customers or to accessing local science and technology. This study proposes that based on governance form distinct factor derived benefits can be capitalized. To corroborate or refute factors and their relations on R&D globalization governance forms, an empirical study based on expert interviews of pharmaceutical directors was conducted in the People's Republic of China. The market was found to be the major influencing factor. Local requirements and adaptation were corroborated as factors connected with markets. Furthermore, influencing factors, such as labour, centers of excellence, cost, financial incentives were corroborated together with conditional and risk factors. Furthermore this research argues that the globalization of pharmaceutical R&D is dependent on the financial, scientific and operational requirements of the drug discovery stage. And thus establishes the influence of drug discovery's stages continuum on pharmaceutical R&D globalization. Finally, a R&D globalization governance form decision framework is proposed based on the frameworks presented in literature and author's corroborated empirical findings.

The Role Of Social Networks In New Venture Internationalization: Case Of Russian And Finnish Firms

The purpose of current master thesis research is to investigate the role of social networks in internationalization of Russian and Finnish firms. Literature review of existing empirical researches on the topic is conducted in order to identify the gap, which is fulfilled by empirical research of 4 Russian and 1 Finnish firm that have established international operations no later than 8 years since their foundation. In-depth semi-structured interviews have shown that business network has been an influencing factor in firms’ internationalization and that even if social network is not the driver of internationalization, it becomes important when a company has established international presence and is working on its enlargement. The study has both theoretical and practical contribution by contributing to research of Russian and Finnish firms’ internationalization and by showing examples of successful foreign market entry of companies from different industries. General practical implication of current thesis is that it shows the efficient ways of entrepreneurs’ social network usage in business development in international scope.

A Study of role conflict, role ambiguity, locus of control, job satisfaction and participation in decision making among front-line vocational service workers for mentally retarded adults

This study was an investigation of individual and organizational factors, as perceived by front-line vocational service workers from Adult Rehabilitation Centres (ARC Industries) for mentally retarded adults. The specific variables which were measured included role conflict/role ambiguity (role factors), internal/external locus of control (individual differences), job satisfaction with work and supervision (job attitudes) and participation in deci~ion making (organizational factor). The exploration of these constructs was conducted by means of self-report questionnaires which were completed by sixty-nine out of a total of ninety front-line employees. The surveys were distributed in booklet form to nine distinct rehabilitation facilities from St. Catharines, West Lincoln, Greater Niagara, Port Colborne, WeIland, Fort Erie, Hamilton, Guelph and Brantford. The survey data was evaluated by the statisti.cal Package for the Social Sciences (SPSS) which used the Pearson Product Moment Correlation procedure and a compar~son of means test. A comparison of correlation coefficients test was also conducted. This statistical procedure was calculated mathematically. The results obtained from the statistical evaluation confirmed the prediction that self-reported measures of participation in decision making and satisfaction (work and supervision) would be negatively correlated with role conflict and role ambiguity. As well, the speculation that perceived satisfaction (work and supervision) would be positively correlated with participation in decision making was empirically supported. Internal and external locus of control did not contribute to a significant difference in r~sponses to role perceptions (conflict and ambiguity) , satisfaction (work and supervision) or the correlational relationship between participation in decision making and satisfaction (work and supervision). Overall, the findings from this study substantiated the importance of examining employee perceptions in the workplace and the interrelationships among individual and organizational variables. This research was considered a contribution to the general area of occupational stress and to the study of individuals in work organizations.

The design of a reflectance spectrometer and its calibration using SrTiO3 /

A new Ultra-High Vacuum (UHV) reflectance spectrometer was successfully designed, making use of a Janis Industries ST-400 sample cryostat, IR Labs bolometer, and Briiker IFS 66 v/S spectrometer. Two of the noteworthy features include an in situ gold evaporator and internal reference path, both of which allow for the experiment to progress with a completely undisturbed sample position. As tested, the system was designed to operate between 4.2 K and 325 K over a frequency range of 60 - 670 cm~^. This frequency range can easily be extended through the addition of appUcable detectors. Tests were performed on SrTiOa, a highly ionic incipient ferroelectric insulator with a well known reflectance. The presence and temperatmre dependence of the lowest frequency "soft" mode were measured, as was the presence of the other two infrared modes. During the structural phase transition from cubic to tetragonal perovskite, the splitting of the second phonon mode was also observed. All of the collected data indicate good agreement with previous measurements, with a minor discrepency between the actual and recorded sample temperatures.

Niagara Falls power and American industries /

Reprinted from the Transactions of the American Electrochemical Society, twenty-ninth general meeting, Washington, D.C., April 27-29, 1916.

Manufacturing 'authenticity' : a case study of the Niagara wine cluster

In this thesis, I use "Fabricating Authenticity," a model developed in the Production of Culture Perspective, to explore the evolving criteria for judging what constitute "real" and authentic Niagara wines, along with the naturalization of these criteria, as the Canadian Niagara wine cluster has come under increasing stress from globalization. Authenticity has been identified as a hallmark of contemporary marketing and important to cultural industries, which can use it for creating meaningful differentiation; making it a renewable resource for securing consumers, increasing market value; and for relationships with key brokers. This is important as free trade and international treaties are making traditional protective barriers, like trade tariffs and markups, obsolete and as governments increasingly allocate industry support via promotion and marketing policies that are directly linked to objectives of city and regional development, which in turn carry real implications for what gets to be judged authentic and inauthentic local culture. This research uses a mixed methods research strategy, drawing upon ethnographic observation, marketing materials, newspaper reports, and secondary data to provide insight into the processes and conflicts over efforts to fabricate authenticity, comparing the periods before and after the passage of NAFT A to the present period. The Niagara wine cluster is a good case in point because it has little natural advantage nor was there a tradition of quality table wine making to facilitate the naturalization of authenticity. Geographic industrial clusters have been found particularly competitive in the global economy and the exploratory case study contributes to our understanding of the dynamic of '1abricating authenticity," building on various theoretical propositions to attempt to derive explanations of how global processes affect strategies to create "authenticity," how these strategies affect cultural homogeneity and heterogeneity at the local level, and how the concept of "cluster" contributes to the process of managing authenticity.

Office of the City Clerk, St. Catharines Records, 1928-1974, n.d.

The site of present-day St. Catharines was settled by 3000 United Empire Loyalists at the end of the 18th century. From 1790, the settlement (then known as "The Twelve") grew as an agricultural community. St. Catharines was once referred to Shipman's Corners after Paul Shipman, owner of a tavern that was an important stagecoach transfer point. In 1815, leading businessman William Hamilton Merritt abandoned his wharf at Queenston and set up another at Shipman's Corners. He became involved in the construction and operation of several lumber and gristmills along Twelve Mile Creek. Shipman's Corners soon became the principal milling site of the eastern Niagara Peninsula. At about the same time, Merritt began to develop the salt springs that were discovered along the river which subsequently gave the village a reputation as a health resort. By this time St. Catharines was the official name of the village; the origin of the name remains obscure, but is thought to be named after Catharine Askin Robertson Hamilton, wife of the Hon. Robert Hamilton, a prominent businessman. Merritt devised a canal scheme from Lake Erie to Lake Ontario that would provide a more reliable water supply for the mills while at the same time function as a canal. He formed the Welland Canal Company, and construction took place from 1824 to 1829. The canal and the mills made St. Catharines the most important industrial centre in Niagara. By 1845, St. Catharines was incorporated as a town, with the town limits extending in 1854. Administrative and political functions were added to St. Catharines in 1862 when it became the county seat of Lincoln. In 1871, construction began on the third Welland Canal, which attracted additional population to the town. As a consequence of continual growth, the town limits were again extended. St. Catharines attained city status in 1876 with its larger population and area. Manufacturing became increasingly important in St. Catharines in the early 1900s with the abundance of hydro-electric power, and its location on important land and water routes. The large increase in population after the 1900s was mainly due to the continued industrialization and urbanization of the northern part of the city and the related expansion of business activity. The fourth Welland Canal was opened in 1932 as the third canal could no longer accommodate the larger ships. The post war years and the automobile brought great change to the urban form of St. Catharines. St. Catharines began to spread its boundaries in all directions with land being added five times during the 1950s. The Town of Merritton, Village of Port Dalhousie and Grantham Township were all incorporated as part of St. Catharines in 1961. In 1970 the Province of Ontario implemented a regional approach to deal with such issues as planning, pollution, transportation and services. As a result, Louth Township on the west side of the city was amalgamated, extending the city's boundary to Fifteen Mile Creek. With its current population of 131,989, St. Catharines has become the dominant centre of the Niagara region. Source: City of St. Catharines website http://www.stcatharines.ca/en/governin/HistoryOfTheCity.asp (January 27, 2011)

Letter Discussing the Parliamentary Act to Regulate the Curing, Packing, and Inspection of Beef and Pork. 1819

A letter on behalf of Sir Peregrine Maitland, the Lieutenant Governor of Upper Canada to those in Niagara discussing an act passed in parliament regulating the curing, packing and inspection of beef and pork. The letter also states that William Duff Miller was appointed as an Inspector of Beef and Pork within the District of Niagara.

Automatic evolution of conceptual building architectures

This thesis describes research in which genetic programming is used to automatically evolve shape grammars that construct three dimensional models of possible external building architectures. A completely automated fitness function is used, which evaluates the three dimensional building models according to different geometric properties such as surface normals, height, building footprint, and more. In order to evaluate the buildings on the different criteria, a multi-objective fitness function is used. The results obtained from the automated system were successful in satisfying the multiple objective criteria as well as creating interesting and unique designs that a human-aided system might not discover. In this study of evolutionary design, the architectures created are not meant to be fully functional and structurally sound blueprints for constructing a building, but are meant to be inspirational ideas for possible architectural designs. The evolved models are applicable for today's architectural industries as well as in the video game and movie industries. Many new avenues for future work have also been discovered and highlighted.