Estudo comparativo entre as metodologias eschka, infravermelho, condutividade térmica (TCD) e ultravioleta para a determinação de enxofre total em combustíveis sólidos

The oxidation of sulphur compounds upon burning emits large quantities of SOx into the atmosphere. Therefore, there is growing interest in fast and accurate methods for analyzing sulphur content in fuels. The objective of this work was to compare four different methods of total sulphur determination in solid fuels. The methods used in this work were Eschka, Infrared, Thermal Conductivity Detection (TCD) and Ultraviolet Fluorescence Detection (UV). The preliminary results showed that TCD and UV methods (nonstandard methods for solid fuels) have similar precision to the infrared method (standard method) for high-sulphur coal samples.

Optimization of solvent mixtures for extraction from bark of Schinus terebinthifolius by a statistical mixture-design technique and development of a UV-Vis spectrophotometric method for analysis of total polyphenols in the extract

A statistical mixture-design technique was used to study the effects of different solvents and their mixtures on the yield, total polyphenol content, and antioxidant capacity of the crude extracts from the bark of Schinus terebinthifolius Raddi (Anacardiaceae). The experimental results and their response-surface models showed that ternary mixtures with equal portions of all the three solvents (water, ethanol and acetone) were better than the binary mixtures in generating crude extracts with the highest yield (22.04 ± 0.48%), total polyphenol content (29.39 ± 0.39%), and antioxidant capacity (6.38 ± 0.21). An analytical method was developed and validated for the determination of total polyphenols in the extracts. Optimal conditions for the various parameters in this analytical method, namely, the time for the chromophoric reaction to stabilize, wavelength of the absorption maxima to be monitored, the reference standard and the concentration of sodium carbonate were determined to be 5 min, 780 nm, pyrogallol, and 14.06% w v-1, respectively. UV-Vis spectrophotometric monitoring of the reaction under these conditions proved the method to be linear, specific, precise, accurate, reproducible, robust, and easy to perform.

Imobilização e caracterização de lacase e seu uso na biodegradação de efluentes de indústrias papeleiras

Laccase from Aspergillus sp was immobilized on glutaraldehyde-activated chitosan beads. A comparative study between free and immobilized laccase was conducted and the potential of the resulting immobilized derivative in the biodegradation of pulp and paper mill effluent was evaluated. The immobilized laccase is more resistant to various denaturing conditions, which allows for the reduction of 65% of the phenols (total and low molecular weight) and loss of 60% of total color in the effluent. These results show the potential of the immobilized laccase in the biodegradation of phenols, the chemical agents responsible for the high toxicity of the effluent generated in cellulose pulp industries.

Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectroscopy and chemometric techniques for the determination of adulteration in petrodiesel/biodiesel blends

We propose an analytical method based on fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectroscopy to detect the adulteration of petrodiesel and petrodiesel/palm biodiesel blends with African crude palm oil. The infrared spectral fingerprints from the sample analysis were used to perform principal components analysis (PCA) and to construct a prediction model using partial least squares (PLS) regression. The PCA results separated the samples into three groups, allowing identification of those subjected to adulteration with palm oil. The obtained model shows a good predictive capacity for determining the concentration of palm oil in petrodiesel/biodiesel blends. Advantages of the proposed method include cost-effectiveness and speed; it is also environmentally friendly.

Análise exploratória aplicada a espectros de reflexão total atenuada no infravermelho com transformada de Fourier (ATR-FTIR) de blendas de biodiesel/diesel

In this study, hierarchical cluster analysis (HCA) and principal component analysis (PCA) were used to classify blends produced from diesel S500 and different kinds of biodiesel produced by the TDSP methodology. The different kinds of biodiesel studied in this work were produced from three raw materials: soybean oil, waste cooking oil and hydrogenated vegetable oil. Methylic and ethylic routes were employed for the production of biodiesel. HCA and PCA were performed on the data from attenuated total reflectance Fourier transform infrared spectroscopy, showing the separation of the blends into groups according to biodiesel content present in the blends and to the kind of biodiesel used to form the mixtures.

In vitro radical-scavenging activity, toxicity against A. salina, and nmr profiles of extracts of lichens collected from Brazil and Antarctica

Extracts of six lichen species collected from Brazil and Antarctica were investigated for their potential toxicity and radical-scavenging properties. The composition of the extracts was investigated using TLC and NMR, leading to identification of atranorin (1), along with salazinic (2), barbatic (3), α-alectoronic (4), α-collatolic (5), cryptochlorophaeic (6), caperatic (7), lobaric (8), and protolichesterinic (9) acids. All acetone extracts were evaluated for their 2,2'-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging ability and subjected to Artemia salina bioassay. The free-radical-scavenging activities of each extract (100 µg) ranged from 8.9 ± 0.1% to 38.7 ± 2.5% and the EC50 values ranged from 0.24 ± 2.10 to 3.54 ± 0.28 mg mL-1, while the toxicity of the extracts against A. salina were low (151.0 to >600 µg mL-1).

A FACTORIAL DESIGN APPLIED TO THE STUDY OF CHROMIUM TOXICITY ON THE GLUTATHIONE LEVELS OF Brachiaria brizantha AND Brachiaria ruziziensis SEEDLINGS

Chromium toxicity affects redox reactions within plant cells, generating detrimental reactive oxygen species. Glutathione is an antioxidant peptide and also a substrate for the production of phytochelatins, which are chelating peptides reported to mitigate Cr3+ toxicity in plants. In this study, Brachiaria brizantha (B. brizantha) and Brachiaria ruziziensis (B. ruziziensis) seedlings were evaluated for physiological responses and glutathione production following the addition of zero or 5 mg L-1 Cr3+ to the nutrient solution. Glutathione levels were determined by colorimetric analysis at 412 nm using 5,5'-dithio-bis(2-nitrobenzoic acid) as a chromophore reagent and recovery with glutathione reductase (with evaluations at days 10 and 20 of continuous growth). The assessments were carried out in a completely randomized design with 2 authentic replications, and arranged in a 23 factorial. Cr3+ caused an average increase of 0.76 mg g-1 in the initial glutathione content. However, by day 20 there was an average reduction of 3.63 mg g-1. Chromium-affected physiological detrimental responses, albeit detected in both species, were less-pronounced in B. ruziziensis, along with a much higher level of glutathione. This study indicates that B. ruziziensis has a greater tolerance for chromium toxicity than B. brizantha, and that glutathione is likely to be involved in the mitigation of chromium stress in B. ruziziensis.

SÍNTESE DE ÁCIDOS CUMARINO-3-CARBOXÍLICOS E SUA APLICAÇÃO NA SÍNTESE TOTAL DA AIAPINA, CUMARINA E UMBELIFERONA

The synthesis of 3-coumarin-carboxylic acids and their application to the total synthesis of the natural products ayapin, coumarin, and umbeliferone in undergraduate organic chemistry experiments is described herein. The synthetic approach consists of a one-pot cyclization between salyciladehydes and Meldrum's acid in water to produce the above mentioned acids, followed by decarboxylation under basic or radical conditions.

MÉTODOS DE EXTRAÇÃO DE POLI-HIDROXIALCANOATOS A PARTIR DE BIOMASSA BACTERIANA

Polyhydroxyalkanoates (PHAs) are biodegradable and biocompatible polyesters intracellularly accumulated by many bacteria as an energy reserve material and carbon source. These biopolymers may be extracted from cells after their production phase, and the extraction process involves various individual operations to ensure adequate removal of the biopolymer from the cells. During this process, the following aspects should be considered: reduction of product losses during different stages of the process to obtain a highly pure product, preservation of physical and thermal characteristics, and use of low toxicity chemicals to achieve sustainable production and avoid harming the environment. The impact of the costs of PHA extraction on the total cost of the production process may account for over 50% of the end-value of the product. Within this context, several methods of PHA extraction have been reported in the literature. These methods include the use of solvents, chemical digestion, enzymatic digestion, mechanical extraction with high-pressure homogenization and ultrasound, extraction using supercritical fluids, or a combination of these methods. The present review of the literature shows strategies for extraction processes of PHAs produced by bacteria involving cell destabilization and/or breakage, recovery, and purification of the biopolymer.

Total Cost of Ownership - Elinkaarilaskennan sovellus

Ostotapahtumassa kiinnitetään usein huomiota hintaan, mutta hankintapäätökseen vaikuttavat myös muutkin kustannukset. Ongelman asiassa aiheuttaa kokonaiskustannusvaikutuksien arvioinnin ja mittauksen haasteellisuus, sekä kunnollisen raportointijärjestelmän puuttuminen. Hankinnan kokonaiskustannusten selvittäminen pitkällä aikavälillä on kuitenkin tärkeää, koska hankintojen osuus yritysten liikevaihdoista on jatkuvassa kasvussa. Työn tarkoituksena oli tarkastella Total cost of ownershipia, eli TCO:ta, elinkaarilaskennan sovellusta. Tarkastelun aluksi työlle luotiin teoreettinen pohja käyttäen hyväksi kirjallisuutta, artikkeleita sekä www-dokumentteja. Teoriaosuus rakentui kustannuslaskennan osalta kustannusten tunnistamisesta, jakamisesta ja kohdistamisesta. TCO:sta luotiin mahdollisimman laaja-alainen teoreettinen kuvaus. Seuraavaksi työssä käsiteltiin TCO:n soveltamista sen perinteisimpiin käyttökohteisiin: taloudellisesti merkittäviin hankintoihin, ulkoistamispäätöksiin, hinnoitteluun sekä toimittajien suorituskyvyn seurantaan ja analysointiin. TCO:n soveltamista käsittelevä osuus päätettiin kotimaisilla esimerkeillä TCO:n soveltamisesta IT-hankintojen apuvälineenä. Työ päätettiin käymällä läpi työtä tehdessä kypsyneet ajatukset sekä johtopäätökset.

Use of a Ca-selective electrode in the determination of total Ca in the production of crude sugar. Preliminary studies

The determination of the total calcium in juice, syrups, and other products of the sugar industry is investigated. Total calcium and free calcium is determinated by AAS and employing Ca-selective electrode respectively. A coefficient is obtained for the relation of total calcium with respect to free calcium. The coefficient is employed to determine the content of total calcium in accordance with the following equation.

Gestão da qualidade total: introdução dos conceitos e a sua utilização em um curso para abordar o comportamento individual do aluno/profissional/cidadão

A introdução do assunto qualidade, segundo as necessidades de mercado abre espaço para a discussão da qualidade como necessidade pessoal, e também para a formação do cidadão/profissional, além de introduzir assuntos específicos de administração de empresas. Dessa forma, foi oferecida uma disciplina optativa para os alunos do Instituto de Química do Campus de Araraquara, abordando o tema Qualidade e foi denominada "Gestão da Qualidade" por três anos seguidos. Da avaliação geral do curso extraiu-se que ele deveria ser realizado sempre, que o tema é atual e relevante e contribui para a formação profissional/pessoal. Com relação ao comprometimento com o curso de graduação, cerca de metade dos alunos assume o seu comprometimento com os estudos e os restantes dizem estarem somente envolvidos. Conclui-se, portanto que o curso atingiu os seus objetivos propostos, introduziu os principais conceitos de qualidade segundo as normas da qualidade da série ISO 9000 e suscitou a discussão da formação do aluno/profissional/cidadão.

Avaliação da confiabilidade analítica das determinações de carbono orgânico total (COT)

Observando a literatura pode ser verificado um crescente número de trabalhos que determinam potenciais contaminantes presentes em matrizes de interesse ambiental. É importante ressaltar que quando se estuda o ambiente, os dados analíticos são uma das ferramentas usadas para se avaliar a extensão dos problemas observados que conseqüentemente influenciam as tomadas de decisão. Assim a confiabilidade desses dados é de extrema importância. Neste contexto, este trabalho visa avaliar a confiabilidade analítica das determinações de Carbono Orgânico Total (COT), ferramenta empregada no monitoramento da matéria orgânica em diversos estudos ambientais. Para essa avaliação foram analisados alguns parâmetros de desempenho como limite de detecção e quantificação, repetibilidade e linearidade.

Avaliação do desempenho analítico do método de determinação de TPH (Total Petroleum Hydrocarbon) por detecção no infravermelho

No presente trabalho os parâmetros de desempenho (validação intralaboratorial) da metodologia de determinação de TPH (Total Petroleum Hydrocarbons) foram determinados por detecção na região do infravermelho com o equipamento da Infracal TOG/TPH, visando aplicação em amostras de areia contaminadas com petróleo. Os ensaios foram realizados utilizando Óleo Marine Fuel 380, com densidade igual 0,987 g cm-3 e viscosidade de 5313 cP a 20°C. Este óleo foi fornecido pelo Centro de Pesquisa da Petrobrás (CENPES/PETROBRÁS/RJ), sendo o mesmo óleo derramado no acidente ocorrido em janeiro de 2000, na Baia de Guanabara, RJ, quando 1.300 m3 vazaram do duto que interliga a REDUC (Refinaria Duque de Caxias, RJ) ao terminal da Ilha d’Água/RJ, atingindo praias. Os resultados da validação indicaram que o desempenho da metodologia foi favorável à aplicação que se destina. Entre os parâmetros metrológicos obtidos neste trabalho, o limite de detecção do método foi de 4,06 mg L-1, consideravelmente inferior à faixa de concentração normalmente obtida para amostras em tais situações.