In pursuit of an intercultural dimension in EFL-teaching : exploring cognitions among Finland-Swedish comprehensive school teachers

This thesis is about the educational purpose of foreign language teaching (FLT) in an increasingly internationalised world.The past 20-30 years have witnessed a fundamental rethinking of the aims of FLT, entailing a shift in emphasis from linguistic competence over communicative competence to intercultural competence. The growing emphasis on cultural issues, called for by research and international curricular documents, places new demandson language teachers. The overall aim of this study is to deepen the knowledge about the attitudes of teachers at the upper level of the Finland-Swedish comprehensive school towards the treatment of culture in English foreign language (EFL) teaching. The questions in focus are: 1) How do teachers interpret the concept"culture" in EFL-teaching?, 2) How do they specify the cultural objectives of their teaching? and 3) What do they do to attain these objectives? The thesis strives to reveal whether or not language teaching today can be describedas intercultural, in the sense that culture is taught with the aim of promotingintercultural understanding, tolerance and empathy. This abductive and largely exploratory study is placed within a constructivist and sociocultural framework,and is inspired by both phenomenography and hermeneutics. It takes its starting-point in language didactics, and can also be regarded as a contribution to teacher cognition research. The empirical data consists of verbatim transcribed interviews with 13 Finland-Swedish teachers of English at grades 7-9. The findings are presented according to three orientations and reviewed with reference to the 2004 Finnish National Framework Curriculum. Within the cognitive orientation, "culture" is perceived as factual knowledge, and the teaching of cultureis defined in terms of the transmission of knowledge, especially about Britain and the USA (Pedagogy of Information). Within the action-related orientation, "culture" is seen as skills of a social and socio-linguistic nature, andthe teaching aims at preparing the students for contacts with people from the target language areas (Pedagogy of Preparation). Within the affective orientation, which takes a more holistic approach, "culture" is seen as a bi-directional perspective. Students are encouraged to look at their own familiar culture from another perspective, and learn to empathise with and show respect for otherness in general, not just concerning representatives of English-speaking countries (Pedagogy of Encounter). Very few of the interviewed teachers represent the third approach, which is the one that can be characterised as truly intercultural. The study indicates that many teachers feel unsure about how to teach culture in an appropriate and up-to-date manner. This is attributed to, among other things, lack of teacher insights as well as lack of time and adequate material. The thesis ends with a set of recommendations as to how EFL could be developed ina more intercultural direction.

Integrating environmental education in primary school education in Tanzania : teachers’ perceptions and teaching practices

The study focuses on primary school teachers’ perceptions of environmental education, its integration into primary school education and teachers’ teaching practices in Tanzania. The thesis is based on empirical research. The theoretical underpinnings of the study are based on Palmer’s (1998) model of environmental education. According to the model, meaningful environmental education should include education about, in or through and for the environment. The study is supported by national and international literature from research done on environmental education and education for sustainable development and policy statements. The study is qualitative in nature, adopting phenomenography and phenomenology as points of departure. The empirical data was collected from four primary schools in Morogoro region in Tanzania. The study sample consisted of 31 primary school teachers. Data was collected through interviews and lesson observations. According to the results of the study, primary school teachers expressed variations in their perceptions of environmental education and education for sustainable development. Most of the teachers focused on the aspect of knowledge acquisition. According to Tanzanian education and training policy, environmental education has to be integrated into all subjects. Although there is environmental education in the primary school curriculum, it is not integrated on an equal footing in all subjects. Some subjects like science, social studies and geography have more environmental content than other subjects. Teachers claim that the approach used to integrate environmental education into the school curriculum was not favoured because many claimed that what is to be taught as environmental education in the various subjects is not shown clearly. As a result, many teachers suggested that to ensure that it is taught properly it should be included in the curriculum as an independent subject or as specific topics. The study revealed that teachers’ teaching practices in integrating environmental education varied from one subject to another. Although most of the teachers said that they used participatory methods, lesson observations showed that they limited themselves to question and answer and group discussion. However, the teachers faced a number of barriers in the teaching of environmental education, some of which include lack of teaching and learning resources, time and large class size. The role of teachers in the implementation of environmental education in developing an environmentally literate citizenry is of great significance. The responsibility of the government in developing a curriculum with clear goals and content, developing teachers’ capacity in the teaching of environmental education and provision of teaching and learning materials needs to be taken seriously by the government in educational plans and programs.

Active teaching-learning methodologies: medical students' views of problem-based learning

The prevailing undergraduate medical training process still favors disconnection and professional distancing from social needs. The Brazilian Ministries of Education and Health, through the National Curriculum Guidelines, the Incentives Program for Changes in the Medical Curriculum (PROMED), and the National Program for Reorientation of Professional Training in Health (PRO-SAÚDE), promoted the stimulus for an effective connection between medical institutions and the Unified National Health System (SUS). In accordance to the new paradigm for medical training, the Centro Universitário Serra dos Órgãos (UNIFESO) established a teaching plan in 2005 using active methodologies, specifically problem-based learning (PBL). Research was conducted through semi-structured interviews with third-year undergraduate students at the UNIFESO Medical School. The results were categorized as proposed by Bardin's thematic analysis, with the purpose of verifying the students' impressions of the new curriculum. Active methodologies proved to be well-accepted by students, who defined them as exciting and inclusive of theory and practice in medical education.

Learning through role-playing games: an approach for active learning and teaching

This study evaluates the use of role-playing games (RPGs) as a methodological approach for teaching cellular biology, assessing student satisfaction, learning outcomes, and retention of acquired knowledge. First-year undergraduate medical students at two Brazilian public universities attended either an RPG-based class (RPG group) or a lecture (lecture-based group) on topics related to cellular biology. Pre- and post-RPG-based class questionnaires were compared to scores in regular exams and in an unannounced test one year later to assess students' attitudes and learning. From the 230 students that attended the RPG classes, 78.4% responded that the RPG-based classes were an effective tool for learning; 55.4% thought that such classes were better than lectures but did not replace them; and 81% responded that they would use this method. The lecture-based group achieved a higher grade in 1 of 14 regular exam questions. In the medium-term evaluation (one year later), the RPG group scored higher in 2 of 12 questions. RPG classes are thus quantitatively as effective as formal lectures, are well accepted by students, and may serve as educational tools, giving students the chance to learn actively and potentially retain the acquired knowledge more efficiently.

Towards the Best A++ Rating Productivity of Research and Teaching in Finnish Universities

Tämän tutkimusraportin suomenkielinen versio on osoitteessa: http://urn.fi/URN:ISBN:978-951-29-4509-2

Evaluating multidimensional visualization techniques in data mining tasks

Visual data mining (VDM) tools employ information visualization techniques in order to represent large amounts of high-dimensional data graphically and to involve the user in exploring data at different levels of detail. The users are looking for outliers, patterns and models – in the form of clusters, classes, trends, and relationships – in different categories of data, i.e., financial, business information, etc. The focus of this thesis is the evaluation of multidimensional visualization techniques, especially from the business user’s perspective. We address three research problems. The first problem is the evaluation of projection-based visualizations with respect to their effectiveness in preserving the original distances between data points and the clustering structure of the data. In this respect, we propose the use of existing clustering validity measures. We illustrate their usefulness in evaluating five visualization techniques: Principal Components Analysis (PCA), Sammon’s Mapping, Self-Organizing Map (SOM), Radial Coordinate Visualization and Star Coordinates. The second problem is concerned with evaluating different visualization techniques as to their effectiveness in visual data mining of business data. For this purpose, we propose an inquiry evaluation technique and conduct the evaluation of nine visualization techniques. The visualizations under evaluation are Multiple Line Graphs, Permutation Matrix, Survey Plot, Scatter Plot Matrix, Parallel Coordinates, Treemap, PCA, Sammon’s Mapping and the SOM. The third problem is the evaluation of quality of use of VDM tools. We provide a conceptual framework for evaluating the quality of use of VDM tools and apply it to the evaluation of the SOM. In the evaluation, we use an inquiry technique for which we developed a questionnaire based on the proposed framework. The contributions of the thesis consist of three new evaluation techniques and the results obtained by applying these evaluation techniques. The thesis provides a systematic approach to evaluation of various visualization techniques. In this respect, first, we performed and described the evaluations in a systematic way, highlighting the evaluation activities, and their inputs and outputs. Secondly, we integrated the evaluation studies in the broad framework of usability evaluation. The results of the evaluations are intended to help developers and researchers of visualization systems to select appropriate visualization techniques in specific situations. The results of the evaluations also contribute to the understanding of the strengths and limitations of the visualization techniques evaluated and further to the improvement of these techniques.

Käsityön monet merkitykset. Opettajankoulutuksen opiskelijoiden käsityölle antamat merkitykset ja niiden huomioon ottaminen käsityön opetuksessa

Tämän tutkimuksen kohteena olivat opettajaopiskelijat, jotka reflektoivat käsityöprosessin aikaista toimintaansa ja sen tuloksia. Tutkimuksen kontekstina oli Turun yliopiston opettajankoulutuslaitoksen Rauman yksikön käsityökasvatuksen perusopinnot. Tutkimushenkilöinä olivat KSP11b Yhteenvetojakson lukuvuosien 2007 – 2008 ja 2008 – 2009 käsityökasvatuksen sivuja pääaineopiskelijat (n=23). Tutkimusaineistona käytettiin opiskelijoiden KSP11b Yhteenvetojaksolla valmistamia käsityötuotteita, niihin liittyviä portfoliota sekä haastatteluita, jotka analysoitiin semioottisella sisällönanalyysilla. Tutkimuksen lähestymistapa on hermeneuttisfenomenologinen. Sen pyrkimyksenä on ymmärtää ja tulkita opiskelijoiden kokemia käsityöprosesseja ja niihin liitettyjä merkityksiä. Tutkimuksessa selvitettiin, millaisia merkityksiä opiskelijat antavat käsityölle ja miten käsityön merkitykset tulisi ottaa huomioon käsityön opetuksessa. Tutkimustuloksina esitetään opiskelijoiden käsityölle antamista merkityksistä neljä erilaista orientaatiotyyppiä: 1) käsityötuoteorientoituneet, 2) käsityötaitoorientoituneet 3) käsityöperinneorientoituneet ja 4) käsityöilmaisuorientoituneet. Käsityötuoteorientoituneet opiskelijat aloittavat ongelmanratkaisuprosessinsa päättämällä, minkä tuotteen he haluavat valmistaa. Käsityötaitoorientoituneille opiskelijoille käsityöprosessi on oman osaamisen näyttämistä ja kehittämistä. Käsityöperinneorientoituneet opiskelijat saavat motivaationsa käsityötuotteen valmistukseen käsityöperinteen vaalimisesta, esimerkiksi halusta oppia perinteisiä käsityötekniikoita tai halusta oppia käsitöitä jonkun läheisen henkilön ohjaamana. Käsityöilmaisuorientoituneet opiskelijat suhtautuvat käsityöprosessiin elämyksellisesti, jolloin prosessi perustuu tekijän kokemuksiin, mielikuviin, muistojen vaalimiseen ja tunteiden ilmaisemiseen sekä identiteetin rakentamiseen. Tutkimuksessa selvitettiin lisäksi käsityön merkitysten mahdollisuuksia käsityön opetuksessa. Nämä käsityön opetuksen näkökulmat on tutkimuksessa jaettu viiteen luokkaan: 1) käsityötaidon kehittäminen, 2) kokonaisen käsityön tekeminen, 3) konkreettisen käsityötuotteen valmistaminen, 4) käsityöilmaisun kehittäminen ja 5) käsityön monipuoliset sisällöt. Tässä tutkimuksessa korostuu, että käsityön opetus perustuu käsityötaidon oppimiseen. Käsityötaidon kehittämiseen liittyy käsityöllisesti työstettävien materiaalien ja niiden ominaisuuksien hallintaa ja muokkaamiseen tarvitaan käsityöteknologiaa, henkilökohtaista käsityötaitoa ja laatutietoisuutta. Käsityötuote on käsityöprosessin lopputuloksena syntyvä konkreettinen tuotos. Käsityöprosessi toteutuu kokonaisena käsityönä, jossa tekijä suunnittelee ja toteuttaa itse suunnitelmansa. Kokonainen käsityö saa eri tekijöillä erilaisia sovelluksia. Käsityöilmaisulla tarkoitetaan tekijän henkilökohtaista sitoutumista prosessiin ja käsityön monipuolisilla sisällöillä materiaaleja ja teknologioita, joita käsityön tekijä käyttää käsityöprosessin aikana. Lisäksi tutkimusaineistossa ilmeni, että opiskelijat sitoutuvat käsityöprosessiin, kun heillä on mahdollisuus ilmaista itselleen tärkeitä, henkilökohtaisia asioitaan, kuten omaa elämäntilannettaan ja merkityksellisiä kokemuksiaan.

Evaluation of energy efficiency and best available techniques in pumping processes

The potential for enhancing the energy efficiency of industrial pumping processes is estimated to be in some cases up to 50 %. One way to define further this potential is to implement techniques in accordance to definition of best available techniques in pumping applications. These techniques are divided into three main categories: Design, control method & maintenance and distribution system. In the theory part of this thesis first the definition of best available techniques (BAT) and its applicability on pumping processes is issued. Next, the theory around pumping with different pump types is handled, the main stress being in centrifugal pumps. Other components needed in a pumping process are dealt by presenting different control methods, use of an electric motor, variable speed drive and the distribution system. Last part of the theory is about industrial pumping processes from water distribution, sewage water and power plant applications, some of which are used further on in the empirical part as example cases. For the empirical part of this study four case studies on typical pumping processes from older Master’s these were selected. Firstly the original results were analyzed by studying the distribution of energy consumption between different system components and using the definition of BAT in pumping, possible ways to improve energy efficiency were evaluated. The goal in this study was that by the achieved results it would be possible to identify the characteristic energy consumption of these and similar pumping processes. Through this data it would then be easier to focus energy efficiency actions where they might be the most applicable, both technically and economically.

ESTABLISHMENT TECHNIQUES FOR TROPICAL LEGUMES IN THE UNDERSTORY OF A EUCALYPTUS PLANTATION

This study evaluated establishment methods for a mixture of herbaceous forage legumes [Centrosema acutifolium, Clitoria ternatea, Pueraria phaseoloides, Stylosanthes Campo Grande (Stylosanthes capitata + S. macrocephala), Calopogonium mucunoides, Lablab purpureus, Arachis pintoi, and Aeschynomene villosa] under the shade of an Eucalyptus grandis plantation submitted to thinning (40%) 8 years after planting in Anhembi, São Paulo (22°40'S, 48°10'W, altitude of 455 m). The experiment started in December 2008 and consisted of the comparison of the following four types of seed incorporation by light disc harrowing: (1) broadcast sowing without seed incorporation; disc harrowing before (2) or after (3) planting, and (4) disc harrowing before and after planting. Ninety days after planting, the number of legume plants/m2 and the percentage of ground cover by the plants varied between the treatments tested; however, the treatments had no effect on the dry matter accumulation of forage legumes. Disc harrowing before planting yielded superior results compared to the treatments without disc harrowing and disc harrowing after planting. At the end of the experimental period, the plots contained Arachis, Centrosema, Stylosanthes, and Pueraria. The dry matter accumulated by Centrosema corresponded to 73% of total dry matter yield of the plots. The participation of Arachis, Centrosema and Stylosanthes in final dry matter composition of the plots varied according to establishment method. The advantages of the use of species mixtures rather than monocultures in the understory of forest plantations were discussed.

Data mining techniques for identification of spectrally homogeneous areas using NDVI temporal profiles of soybean crop

The aim of this study was to group temporal profiles of 10-day composites NDVI product by similarity, which was obtained by the SPOT Vegetation sensor, for municipalities with high soybean production in the state of Paraná, Brazil, in the 2005/2006 cropping season. Data mining is a valuable tool that allows extracting knowledge from a database, identifying valid, new, potentially useful and understandable patterns. Therefore, it was used the methods for clusters generation by means of the algorithms K-Means, MAXVER and DBSCAN, implemented in the WEKA software package. Clusters were created based on the average temporal profiles of NDVI of the 277 municipalities with high soybean production in the state and the best results were found with the K-Means algorithm, grouping the municipalities into six clusters, considering the period from the beginning of October until the end of March, which is equivalent to the crop vegetative cycle. Half of the generated clusters presented spectro-temporal pattern, a characteristic of soybeans and were mostly under the soybean belt in the state of Paraná, which shows good results that were obtained with the proposed methodology as for identification of homogeneous areas. These results will be useful for the creation of regional soybean "masks" to estimate the planted area for this crop.

The Possibilities and Dosimetric Limitations of MLC-Based Intensity-Modulated Radiotherapy Delivery and Optimization Techniques

The use of intensity-modulated radiotherapy (IMRT) has increased extensively in the modern radiotherapy (RT) treatments over the past two decades. Radiation dose distributions can be delivered with higher conformality with IMRT when compared to the conventional 3D-conformal radiotherapy (3D-CRT). Higher conformality and target coverage increases the probability of tumour control and decreases the normal tissue complications. The primary goal of this work is to improve and evaluate the accuracy, efficiency and delivery techniques of RT treatments by using IMRT. This study evaluated the dosimetric limitations and possibilities of IMRT in small (treatments of head-and-neck, prostate and lung cancer) and large volumes (primitive neuroectodermal tumours). The dose coverage of target volumes and the sparing of critical organs were increased with IMRT when compared to 3D-CRT. The developed split field IMRT technique was found to be safe and accurate method in craniospinal irradiations. By using IMRT in simultaneous integrated boosting of biologically defined target volumes of localized prostate cancer high doses were achievable with only small increase in the treatment complexity. Biological plan optimization increased the probability of uncomplicated control on average by 28% when compared to standard IMRT delivery. Unfortunately IMRT carries also some drawbacks. In IMRT the beam modulation is realized by splitting a large radiation field to small apertures. The smaller the beam apertures are the larger the rebuild-up and rebuild-down effects are at the tissue interfaces. The limitations to use IMRT with small apertures in the treatments of small lung tumours were investigated with dosimetric film measurements. The results confirmed that the peripheral doses of the small lung tumours were decreased as the effective field size was decreased. The studied calculation algorithms were not able to model the dose deficiency of the tumours accurately. The use of small sliding window apertures of 2 mm and 4 mm decreased the tumour peripheral dose by 6% when compared to 3D-CRT treatment plan. A direct aperture based optimization (DABO) technique was examined as a solution to decrease the treatment complexity. The DABO IMRT technique was able to achieve treatment plans equivalent with the conventional IMRT fluence based optimization techniques in the concave head-and-neck target volumes. With DABO the effective field sizes were increased and the number of MUs was reduced with a factor of two. The optimality of a treatment plan and the therapeutic ratio can be further enhanced by using dose painting based on regional radiosensitivities imaged with functional imaging methods.

Thinking Outside the Box: Enhancing Science Teaching by Combining (Instead of Contrasting) Laboratory and Simulation Activities

The focus of the present work was on 10- to 12-year-old elementary school students’ conceptual learning outcomes in science in two specific inquiry-learning environments, laboratory and simulation. The main aim was to examine if it would be more beneficial to combine than contrast simulation and laboratory activities in science teaching. It was argued that the status quo where laboratories and simulations are seen as alternative or competing methods in science teaching is hardly an optimal solution to promote students’ learning and understanding in various science domains. It was hypothesized that it would make more sense and be more productive to combine laboratories and simulations. Several explanations and examples were provided to back up the hypothesis. In order to test whether learning with the combination of laboratory and simulation activities can result in better conceptual understanding in science than learning with laboratory or simulation activities alone, two experiments were conducted in the domain of electricity. In these experiments students constructed and studied electrical circuits in three different learning environments: laboratory (real circuits), simulation (virtual circuits), and simulation-laboratory combination (real and virtual circuits were used simultaneously). In order to measure and compare how these environments affected students’ conceptual understanding of circuits, a subject knowledge assessment questionnaire was administered before and after the experimentation. The results of the experiments were presented in four empirical studies. Three of the studies focused on learning outcomes between the conditions and one on learning processes. Study I analyzed learning outcomes from experiment I. The aim of the study was to investigate if it would be more beneficial to combine simulation and laboratory activities than to use them separately in teaching the concepts of simple electricity. Matched-trios were created based on the pre-test results of 66 elementary school students and divided randomly into a laboratory (real circuits), simulation (virtual circuits) and simulation-laboratory combination (real and virtual circuits simultaneously) conditions. In each condition students had 90 minutes to construct and study various circuits. The results showed that studying electrical circuits in the simulation–laboratory combination environment improved students’ conceptual understanding more than studying circuits in simulation and laboratory environments alone. Although there were no statistical differences between simulation and laboratory environments, the learning effect was more pronounced in the simulation condition where the students made clear progress during the intervention, whereas in the laboratory condition students’ conceptual understanding remained at an elementary level after the intervention. Study II analyzed learning outcomes from experiment II. The aim of the study was to investigate if and how learning outcomes in simulation and simulation-laboratory combination environments are mediated by implicit (only procedural guidance) and explicit (more structure and guidance for the discovery process) instruction in the context of simple DC circuits. Matched-quartets were created based on the pre-test results of 50 elementary school students and divided randomly into a simulation implicit (SI), simulation explicit (SE), combination implicit (CI) and combination explicit (CE) conditions. The results showed that when the students were working with the simulation alone, they were able to gain significantly greater amount of subject knowledge when they received metacognitive support (explicit instruction; SE) for the discovery process than when they received only procedural guidance (implicit instruction: SI). However, this additional scaffolding was not enough to reach the level of the students in the combination environment (CI and CE). A surprising finding in Study II was that instructional support had a different effect in the combination environment than in the simulation environment. In the combination environment explicit instruction (CE) did not seem to elicit much additional gain for students’ understanding of electric circuits compared to implicit instruction (CI). Instead, explicit instruction slowed down the inquiry process substantially in the combination environment. Study III analyzed from video data learning processes of those 50 students that participated in experiment II (cf. Study II above). The focus was on three specific learning processes: cognitive conflicts, self-explanations, and analogical encodings. The aim of the study was to find out possible explanations for the success of the combination condition in Experiments I and II. The video data provided clear evidence about the benefits of studying with the real and virtual circuits simultaneously (the combination conditions). Mostly the representations complemented each other, that is, one representation helped students to interpret and understand the outcomes they received from the other representation. However, there were also instances in which analogical encoding took place, that is, situations in which the slightly discrepant results between the representations ‘forced’ students to focus on those features that could be generalised across the two representations. No statistical differences were found in the amount of experienced cognitive conflicts and self-explanations between simulation and combination conditions, though in self-explanations there was a nascent trend in favour of the combination. There was also a clear tendency suggesting that explicit guidance increased the amount of self-explanations. Overall, the amount of cognitive conflicts and self-explanations was very low. The aim of the Study IV was twofold: the main aim was to provide an aggregated overview of the learning outcomes of experiments I and II; the secondary aim was to explore the relationship between the learning environments and students’ prior domain knowledge (low and high) in the experiments. Aggregated results of experiments I & II showed that on average, 91% of the students in the combination environment scored above the average of the laboratory environment, and 76% of them scored also above the average of the simulation environment. Seventy percent of the students in the simulation environment scored above the average of the laboratory environment. The results further showed that overall students seemed to benefit from combining simulations and laboratories regardless of their level of prior knowledge, that is, students with either low or high prior knowledge who studied circuits in the combination environment outperformed their counterparts who studied in the laboratory or simulation environment alone. The effect seemed to be slightly bigger among the students with low prior knowledge. However, more detailed inspection of the results showed that there were considerable differences between the experiments regarding how students with low and high prior knowledge benefitted from the combination: in Experiment I, especially students with low prior knowledge benefitted from the combination as compared to those students that used only the simulation, whereas in Experiment II, only students with high prior knowledge seemed to benefit from the combination relative to the simulation group. Regarding the differences between simulation and laboratory groups, the benefits of using a simulation seemed to be slightly higher among students with high prior knowledge. The results of the four empirical studies support the hypothesis concerning the benefits of using simulation along with laboratory activities to promote students’ conceptual understanding of electricity. It can be concluded that when teaching students about electricity, the students can gain better understanding when they have an opportunity to use the simulation and the real circuits in parallel than if they have only the real circuits or only a computer simulation available, even when the use of the simulation is supported with the explicit instruction. The outcomes of the empirical studies can be considered as the first unambiguous evidence on the (additional) benefits of combining laboratory and simulation activities in science education as compared to learning with laboratories and simulations alone.

Uso de língua bovina na prática de técnicas de sutura

The authors present a method of teaching of suture techniques being used instrumental surgical and bovine tongue used in the evaluation of the graduation students' learning. The evaluation of the technique, used since January 2000, considering students' motivation, learning curve, practical applicability, quality of the biological material used and similarity to the human tegument. The acceptance for the students was very good and the bovine tongue was shown material of easy acquisition and extremely useful in the teaching of suture techniques. The presented method is simple, easily reproductible and interesting. The bovine tongue is similar to the skin and the subcutaneous tissue, providing more enlightening and stimulants practical lessons.