Flow patterns and performance of distillation trays

It is known that distillation tray efficiency depends on the liquid flow pattern, particularly for large diameter trays. Scale·up failures due to liquid channelling have occurred, and it is known that fitting flow control devices to trays sometirr.es improves tray efficiency. Several theoretical models which explain these observations have been published. Further progress in understanding is at present blocked by lack of experimental measurements of the pattern of liquid concentration over the tray. Flow pattern effects are expected to be significant only on commercial size trays of a large diameter and the lack of data is a result of the costs, risks and difficulty of making these measurements on full scale production columns. This work presents a new experiment which simulates distillation by water cooling. and provides a means of testing commercial size trays in the laboratory. Hot water is fed on to the tray and cooled by air forced through the perforations. The analogy between heat and mass transfer shows that the water temperature at any point is analogous to liquid concentration and the enthalpy of the air is analogous to vapour concentration. The effect of the liquid flow pattern on mass transfer is revealed by the temperature field on the tray. The experiment was implemented and evaluated in a column of 1.2 m. dia. The water temperatures were measured by thennocouples interfaced to an electronic computerised data logging system. The "best surface" through the experimental temperature measurements was obtained by the mathematical technique of B. splines, and presented in tenos of lines of constant temperature. The results revealed that in general liquid channelling is more imponant in the bubbly "mixed" regime than in the spray regime. However, it was observed that severe channelling also occurred for intense spray at incipient flood conditions. This is an unexpected result. A computer program was written to calculate point efficiency as well as tray efficiency, and the results were compared with distillation efficiencies for similar loadings. The theoretical model of Porter and Lockett for predicting distillation was modified to predict water cooling and the theoretical predictions were shown to be similar to the experimental temperature profiles. A comparison of the repeatability of the experiments with an errors analysis revealed that accurate tray efficiency measurements require temperature measurements to better than ± 0.1 °c which is achievable with conventional techniques. This was not achieved in this work, and resulted in considerable scatter in the efficiency results. Nevertheless it is concluded that the new experiment is a valuable tool for investigating the effect of the liquid flow pattern on tray mass transfer.

Raman amplification and performance altering effects

This thesis presents an experimental investigation into several applications of the Raman scattering effect in communication optical fibres as well as how some of these applications can be modified to enhance the resulting performance. The majority of the work contained within is based on laboratory results using many commercially available components. The results can be divided into and presented in three main parts: Firstly, a novel application of a known effect is used to broaden Raman pump light in order to achieve a more continuous distribution of gain with respect to wavelength. Multiple experimental results are presented, all based around the prior spreading of the pump spectrum before being used in the desired transmission fibre. Gathered results show that a notable improvement can be obtained from applying such a technique along with the scope for further optimisation work. Secondly, an investigation into the interaction between the well known effect of Four Wave Mixing (FWM) and Raman scattering is provided. The work provides an introduction to the effect as well commenting on previous literature regarding the effect and its mitigation. In response to existing research experimental results are provided detailing some limitations of proposed schemes along with concepts of how further alleviation from the deleterious effects maybe obtained. Lastly, the distributed nature of the Raman gain process is explored. A novel technique on how a near constant distribution of gain can be employed is implemented practically. The application of distributed gain is then applied to the generation of optical pulses with special mathematical properties within a laboratory setting and finally the effect of pump noise upon distributed gain techniques is acknowledged.

Cost and performance analysis of new wood-fuelled power plant concepts

The objective of the thesis was to analyse several process configurations for the production of electricity from biomass. Process simulation models using AspenPlus aimed at calculating the industrial performance of power plant concepts were built, tested, and used for analysis. The criteria used in analysis were performance and cost. All of the advanced systems appear to have higher efficiencies than the commercial reference, the Rankine cycle. However, advanced systems typically have a higher cost of electricity (COE) than the Rankine power plant. High efficiencies do not reduce fuel costs enough to compensate for the high capital costs of advanced concepts. The successful reduction of capital costs would appear to be the key to the introduction of the new systems. Capital costs account for a considerable, often dominant, part of the cost of electricity in these concepts. All of the systems have higher specific investment costs than the conventional industrial alternative, i.e. the Rankine power plant; Combined beat and power production (CUP) is currently the only industrial area of application in which bio-power costs can be considerably reduced to make them competitive. Based on the results of this work, AsperiPlus is an appropriate simulation platform. How-ever, the usefulness of the models could be improved if a number of unit operations were modelled in greater detail. The dryer, gasifier, fast pyrolysis, gas engine and gas turbine models could be improved.

Functionalisation of polymers: reactive processing, structure and performance characteristics

The main aim of this work was to study the effect of two comonomers, trimethylolpropane trimethacrylate (TRIS) and divinylbenzene (DVB) on the nature and efficiency of grafting of two different monomers, glycidyl methacrylate (GMA) and maleic anhydride (MA) on polypropylene (P) and on natural rubber (NR) using reactive processing methods. Four different peroxides, benzoyl peroxide (BPO), dicumyl peroxide (DCP), 2,5-dimethyl-2,5-bis-(tert-butyl peroxy) hexane (t-101), and 1,1-di(tert-butylperoxy)-3,3,5-trimethyl cyclohexene (T-29B90) were examined as free radical initiators. An appropriate methodology was established and chemical composition and reactive processing parameters were examined and optimised. It was found that in the absence of the coagents DVB and TRIS, the grafting degree of GMA and MA increased with increasing peroxide concentration, but the level of grafting was low and the homopolymerisaton of GMA and the crosslinking of NR or chain scission of PP were identified as the main side reactions that competed with the desired grafting reaction in the polymers. At high concentrations of the peroxide T-101 (>0.02 mr) cross linking of NR and chain scission of PP became dominant and unacceptable. An attempt to add a reactive coagent, e.g. TRIS during grafting of GMA on natural rubber resulted in excessive crosslinking because of the very high reactivity of this comonomer with the C=C of the rubber. Therefore, the use of any multifunctional and highly reactive coagent such as TRIS, could not be applied in the grafting of GAM onto natural rubber. In the case of PP, however, the use of TRIS and DVB was shown to greatly enhance the grafting degree and reduce the chain scission with very little extent of monomer homopolymerisation taking place. The results showed that the grafting degree was increased with increasing GMA and MA concentrations. It was also found that T-101 was a suitable peroxide to initiate the grafting reaction of these monomers on NR and PP and the optimum temperature for this peroxide was =160°C. A very preliminary work was also conducted on the use of the functionalised-PP (f-PP) in the absence and presence of the two comonomers (f-PP-DVB or f-PP-TRIS) for the purpose of compatibilising PP-PBT blends through reactive blending. Examination of the morphology of the blends suggested that an effective compatibilisation has been achieved when using f-PP-DVB and f-PP-TRIS, however more work is required in this area.

Entry modes and performance of foreign direct investment in China

How does a firm choose a proper model of foreign direct investment (FDI) for entering a foreign market? Which mode of entry performs better? What are the performance implications of joint venture (JV) ownership structure? These important questions face a multinational enterprise (MNE) that decides to enter a foreign market. However, few studies have been conducted on such issues, and no consistent or conclusive findings are generated, especially with respect to China. It’s composed of five chapters, providing corresponding answers to the questions given above. Specifically, Chapter One is an overall introductory chapter. Chapter Two is about the choice of entry mode of FDI in China. Chapter Three examines the relationship between four main entry modes and performance. Chapter Four explores the performance implications of JV ownership structure. Chapter Five is an overall concluding chapter. These empirical studies are based on the most recent and richest data that has never been explored in previous studies. It contains information on 11,765 foreign-invested enterprises in China in seven manufacturing industries in 2000, 10,757 in 1999, and 10,666 in 1998. The four FDI entry modes examined include wholly-owned enterprises (WOEs), equity joint ventures (EJVs), contractual joint ventures (CJVs), and joint stock companies (JSCs). In Chapter Two, a multinominal logit model is established, and techniques of multiple linear regression analysis are employed in Chapter Three and Four. It was found that MNEs, under the conditions of a good investment environment, large capital commitment and small cultural distance, prefer the WOE strategy. If these conditions are not met, the EJV mode would be of greater use. The relative propensity to pursue the CJV mode increases with a good investment environment, small capital commitment, and small cultural distance. JSCs are not favoured by MNEs when the investment environment improves and when affiliates are located in the coastal areas. MNEs have been found to have a greater preference for an EJV as a mode of entry into the Chinese market in all industries. It is also found that in terms of return on assets (ROA) and asset turnover, WOEs perform the best, followed by EJVs, CJVs, and JSCs. Finally, minority-owned EJVs or JSCs are found to outperform their majority-owned counterparts in terms of ROA and asset turnover.

Organisational slack resources, the definitions and consequences for business flexibility and performance : an empirical investigation

Slack resources are recognised to be those spare capabilities and assets of the organisation that are variable reclaimable for re-deployment. They represent under utilised and hidden spare energies within a company that may be recaptured and employed for a variety of tasks. However their positive contribution to organisational success has been a contentious claim that has provoked the intuitive argument that slack resources are inefficiency and are to be eradicated. The counter argument has been that very efficient organisations are inflexible and therefore incapable of being responsive to an increasingly dynamic environment. Therefore this work compares and contrasts three distinctive industries in a holistic manner and maps the impact of environmental flux on the firm, its subsequent disruptive ripples through the organisation and its absorption by slack resources. Through this process it is demonstrated that slack resources do positively contribute to organisational performance and subsequently the ability of slack to promote sustained competitive advantage is also identified. The major findings of this work are listed. 1. This work has developed and perfected a new research model that aids the investigation of the internal behaviours and consequences of Slack Resources. 2. Supported by argument a new variable of Soft Slack was developed. Its validity was demonstrated in its ability to capture the contribution of intangible assets, such as education, experience, spare management time and further training, to the extant levels of Organisational Hard Slack resources. 3. The validity of Soft Slack was further supported when its contribution to organisational Flexibility was also established. 4. The original argument that Slack Resources enhance organisational Performance has been further developed. It is now evidenced that Slack Resources facilitate Organisational Flexibility and by this process enhances Organisational Performance.

A comparative and longitudinal analysis of the evolving relationship between the environment and the strategy, structure and performance of selected organisations in the British carpet industry 1959-1986:a firms in sector perspective of organisational adaptation

Orthodox contingency theory links effective organisational performance to compatible relationships between the environment and organisation strategy and structure and assumes that organisations have the capacity to adapt as the environment changes. Recent contributions to the literature on organisation theory claim that the key to effective performance is effective adaptation which in turn requires the simultaneous reconciliation of efficiency and innovation which is afforded by an unique environment-organisation configuration. The literature on organisation theory recognises the continuing confusion caused by the fragmented and often conflicting results from cross-sectional studies. Although the case is made for longitudinal studies which comprehensively describe the evolving relationship between the environment and the organisation there is little to suggest how such studies should be executed in practice. Typically the choice is between the approaches of the historicised case study and statistical analysis of large populations which examine the relationship between environment and organisation strategy and/or structure and ignore the product-process relationship. This study combines the historicised case study and the multi-variable and ordinal scale approach of statistical analysis to construct an analytical framework which tracks and exposes the environment-organisation-performance relationship over time. The framework examines changes in the environment, strategy and structure and uniquely includes an assessment of the organisation's product-process relationship and its contribution to organisational efficiency and innovation. The analytical framework is applied to examine the evolving environment-organisation relationship of two organisations in the same industry over the same twenty-five year period to provide a sector perspective of organisational adaptation. The findings demonstrate the significance of the environment-organisation configuration to the scope and frequency of adaptation and suggest that the level of sector homogeneity may be linked to the level of product-process standardisation.

Families 'at risk' and the family nurse partnership:the intrusion of risk into social exclusion policy

This article considers why the family nurse partnership (FNP) has been promoted as a means of tackling social exclusion in the UK. The FNP consists in a programme of visits by nurses to low-income first-time mothers, both while the mothers are pregnant and for the first two years following birth. The FNP is focused on both teaching parenthood and encouraging mothers back into education and/or into employment. Although the FNP marks a considerable discontinuity with previous approaches to family health, it is congruent with an emerging new approach to social exclusion. This new approach maintains that the most important task of social policy is to identify quickly the most 'at-risk' households, individuals and children so that interventions can be targeted more effectively at those 'at risk', either to themselves or to others. The article illustrates this new approach by analysing a succession of reports by the Social Exclusion Unit. It indicates that there is a considerable amount of ambiguity about the relationship between specific risk-factors and being 'at risk of social exclusion'. Nonetheless, this new approach helps to explain why British policy-makers may have chosen to promote the new FNP now. © 2009 Cambridge University Press.

Properties and performance of polymer modified cements and mortars

Polymer modified cements and mortars have become popular for use as patch repair materials. General evidence suggests that these materials offer considerable improvements compared to traditional mortars although the mechanisms for this are not fully understood. This work elucidates the factors which govern some properties and performance of different polymer systems. In view of the wide range of commercial systems available, investigations concentrated on the use of three of the most commonly available groups of polymers. These were: (1) Styrene Butadiene Rubber (SBR), (2) Acrylics and, (3) Ethylene Vinyl Acetates (EVA). The later two were in the form of both emulsions and redispersible powders. Experiments concentrated on: (1) Rheological behaviour of polymer modified cement pastes; (2) Workability of polymer modified mortars; (3) Influence of curing conditions on the pore size distribution and diffusion of chloride ions; (4) Bond strength of polymer modified cement and mortar patches; and (5) Microscopic examination and semi-quantitative analyses of the bulk and interfacial microstructures. The following main conclusions were reached: (1) The addition of polymer emulsions have a considerable influence on the workability of fresh cement pastes, the extent of this depending on the type of system used. (2) The rheological parameters of fresh polymer modified mortars can be established using a two-point workability test which may be used when comparing the properties of different systems at constant workability. (3) Curing conditions affect the properties of polymer modified systems and a wet/dry curing regime was essential for good adhesion of these materials to mortar substrates. (4) In contrast, the wet/dry curing regime resulted in a curing affected zone at the surface of patch materials. This can result in a much coarser pore structure and enhanced diffusion of e.g. chloride ions. (5) The microstructure of polymer modified systems was very different compared with the unmodified cement/mortar and varied depending on curing conditions.

Characterisation and performance of a Terfenol-D coated femtosecond laser inscribed optical fibre Bragg sensor with a laser ablated microslot for the detection of static magnetic fields

We present a novel device for the characterisation of static magnetic fields through monitoring wavelength shifts of femtosecond inscribed fibre Bragg grating and micromachined slot, coated with Terfenol-D. The device was sensitive to static magnetic fields and can be used as a vectoral sensor for the detection of magnetic fields as low as 0.046 mT with a resolution of ± 0.3mT in transmission and ± 0.7mT in reflection. The use of a femtosecond laser to both inscribe the FBGs and micromachine the slot in a single stage prior to coating the device significantly simplifies the fabrication.

Political leadership:character and performance. A comparative analysis of British political leadership, 1997-2010.

Classical and contemporary scholarship on leadership has referred to political performance and the ability of political actors to deploy the self to political purpose. Literature on contemporary British politics (Hennessy, 2001; Marquand, 2008, King, 2009) has highlighted the qualitative shift in political leadership from the mid-1990s towards a focus upon the image, style, celebrity and performance of political leaders, and the shift towards the presidentialisation or semi-presidentialisation of the prime minister (Foley, 2001). However, the literature has lacked a focus upon political performance and a methodology for assessing leadership performance within cultural and institutional contexts. This thesis assesses British political leadership performance from 1997-2010 through the proposal of a framework of political performance to suit comparative purpose. The framework consisting of culture, institutions and performance is used to assess the performance of the case studies (Tony Blair, Gordon Brown and David Cameron, and Gordon Brown, David Cameron and Nick Clegg in the televised Leaders’ Debates of 2010). The application of the framework to the case studies will allow us to a) analyse political performance within given cultural and institutional contexts; b) establish the character traits and other aspects of a politician’s political persona; and c) appraise the role and effects of performance and persona upon the political process.