Relating vehicle generated pollutants to urban stormwater quality

Rapid urbanisation and resulting continuous increase in traffic has been recognised as key factors in the contribution of increased pollutant loads to urban stormwater and in turn to receiving waters. Urbanisation primarily increases anthropogenic activities and the percentage of impervious surfaces in urban areas. These processes are collectively responsible for urban stormwater pollution. In this regard, urban traffic and land use related activities have been recognised as the primary pollutant sources. This is primarily due to the generation of a range of key pollutants such as solids, heavy metals and PAHs. Appropriate treatment system design is the most viable approach to mitigate stormwater pollution. However, limited understanding of the pollutant process and transport pathways constrains effective treatment design. This highlights necessity for the detailed understanding of traffic and other land use related pollutants processes and pathways in relation to urban stormwater pollution. This study has created new knowledge in relation to pollutant processes and transport pathways encompassing atmospheric pollutants, atmospheric deposition and build-up on ground surfaces of traffic generated key pollutants. The research study was primarily based on in-depth experimental investigations. This thesis describes the extensive knowledge created relating to the processes of atmospheric pollutant build-up, atmospheric deposition and road surface build-up and establishing their relationships as a chain of processes. The analysis of atmospheric deposition revealed that both traffic and land use related sources contribute total suspended particulate matter (TSP) to the atmosphere. Traffic sources become dominant during weekdays whereas land use related sources become dominant during weekends due to the reduction in traffic sources. The analysis further concluded that atmospheric TSP, polycyclic aromatic hydrocarbons (PAHs) and heavy metals (HMs) concentrations are highly influenced by total average daily heavy duty traffic, traffic congestion and the fraction of commercial and industrial land uses. A set of mathematical equation were developed to predict TSP, PAHs and HMs concentrations in the atmosphere based on the influential traffic and land use related parameters. Dry deposition samples were collected for different antecedent dry days and wet deposition samples were collected immediately after rainfall events. The dry deposition was found to increase with the antecedent dry days and consisted of relatively coarser particles (greater than 1.4 ìm) when compared to wet deposition. The wet deposition showed a strong affinity to rainfall depth, but was not related to the antecedent dry period. It was also found that smaller size particles (less than 1.4 ìm) travel much longer distances from the source and deposit mainly with the wet deposition. Pollutants in wet deposition are less sensitive to the source characteristics compared to dry deposition. Atmospheric deposition of HMs is not directly influenced by land use but rather by proximity to high emission sources such as highways. Therefore, it is important to consider atmospheric deposition as a key pollutant source to urban stormwater in the vicinity of these types of sources. Build-up was analysed for five different particle size fractions, namely, <1 ìm, 1-75 ìm, 75-150 ìm, 150-300 ìm and >300 ìm for solids, PAHs and HMs. The outcomes of the study indicated that PAHs and HMs in the <75 ìm size fraction are generated mainly by traffic related activities whereas the > 150 ìm size fraction is generated by both traffic and land use related sources. Atmospheric deposition is an important source for HMs build-up on roads, whereas the contribution of PAHs from atmospheric sources is limited. A comprehensive approach was developed to predict traffic and other land use related pollutants in urban stormwater based on traffic and other land use characteristics. This approach primarily included the development of a set of mathematical equations to predict traffic generated pollutants by linking traffic and land use characteristics to stormwater quality through mathematical modelling. The outcomes of this research will contribute to the design of appropriate treatment systems to safeguard urban receiving water quality for future traffic growth scenarios. The „real world. application of knowledge generated was demonstrated through mathematical modelling of solids in urban stormwater, accounting for the variability in traffic and land use characteristics.

Leadership practices of Kuwaiti Secondary School Principals for embedding ICT

Globalisation and the emergence of knowledge-based economies have forced many countries to reform their education system. The enhancement of human capital to meet modern day demands of a knowledge economy, and equip the new generation with the capacity to meet the challenges of the 21st Century has become a priority. This change is particularly necessary in economies typical of countries, such as Kuwait, which have been dependent on the exploitation of non-renewable natural resources. Transiting from a resource-based economy to an economy based on knowledge and intellectual skills poses a key challenge for an education system. Significant in the development of this new economy has been the expansion of Information Communication Technology (ICT). In education, in particular, ICT is a tool for transforming the education setting. However, transformation is only successful where there are effective change management strategies and appropriate leadership. At the school level, rapid changes have affected the role that principals take particularly in relation to leading the change process. Therefore, this study investigated the leadership practices of school principals for embedding ICT into schools. The case study assessed two Kuwaiti secondary schools; both schools had well established ICT programs. The mode of data collection used a mixed-methods design, to address the purpose of the study, namely, to examine the leadership practices of school principals when managing the change processes associated with embedding ICT in the context of Kuwait. A theoretical model of principal leadership, developed, from the literature, documented and analysed the practices of the respective school principals. The study used the following five data sources: (a) face to face interviews (with each school principal), and two focus group interviews (with five teachers and five students, from each school); (b) school documents (related to the implementation and embedding of ICT); (c) one survey (of all teachers in each school); (d) an open-ended questionnaire (of participating principals and teachers); and (e) the observation of ICT activities (PD ICT activities and instruction meetings). The study revealed a range of strategies used by the principals and aligned with the theoretical perspective. However, these strategies needed to be refined and selectively used to fit the Kuwait context, both culturally and organisationally. The principals of Schools A and B employed three key strategies to maximise the impact on the teaching staff incorporating ICT into their teaching and learning practices. These strategies were: (a) encouragement for teaching staff to implement ICT in their teaching; (b) support to meet the material and human needs of teaching staff using ICT; and (c) provision of instructions and guidance for teaching staff in how and why such behaviours and practices should be performed. The strategies provided the basic leadership practices required to construct a successful ICT embedded implementation process. Hence, a revised model of leadership that has applicability in the adoption of ICT in Kuwait was developed. The findings provide a better understanding of how a school principal’s leadership practices impact upon the ICT embedding process. Hence, the outcome of this study informs emerging countries, which are also undergoing major change related to ICT, for example, other members of the Cooperation Council for the Arab States of the Gulf. From an educational perspective, this knowledge has the potential to support ICT-based learning environments that will help educational practitioners to effectively integrate ICT into teaching and learning that will facilitate students’ ICT engagement, and prepare them for the ICT development challenges that are associated with the new economy; this is achieved by increasing students’ knowledge and performance. Further, the study offers practical strategies that have been shown to work for school principals leading ICT implementation in Kuwait. These strategies include how to deal with the shortage in schools’ budgets, and the promotion of the ICT vision, as well as developing approaches to build collaborative culture in the schools.

Creative industries in China : art, design and media

Creative industries in China provides a fresh account of China’s emerging commercial cultural sector. The author shows how developments in Chinese art, design and media industries are reflected in policy, in market activity, and grassroots participation. Never has the attraction of being a media producer, an artist, or a designer in China been so enticing. National and regional governments offer financial incentives; consumption of cultural goods and services have increased; creative workers from Europe, North America and Asia are moving to Chinese cities; culture is increasingly positioned as a pillar industry. But what does this mean for our understanding of Chinese society? Can culture be industrialised following the low-cost model of China’s manufacturing economy. Is the national government really committed to social liberalisation? This engaging book is a valuable resource for students and scholars interested in social change in China. It draws on leading Chinese scholarship together with insights from global media studies, economic geography and cultural studies.

Nonlinear H_infinity control of UAVs for collision avoidance in gusty environments

This paper proposes a nonlinear H_infinity controller for stabilization of velocities, attitudes and angular rates of a fixed-wing unmanned aerial vehicle (UAV) in a windy environment. The suggested controller aims to achieve a steady-state flight condition in the presence of wind gusts such that the host UAV can be maneuvered to avoid collision with other UAVs during cruise flight with safety guarantees. This paper begins with building a proper model capturing flight aerodynamics of UAVs. Then a nonlinear controller is developed with gust attenuation and rapid response properties. Simulations are conducted for the Shadow UAV to verify performance of the proposed con- troller. Comparative studies with the proportional-integral-derivative (PID) controllers demonstrate that the proposed controller exhibits great performance improvement in a gusty environment, making it suitable for integration into the design of flight control systems for cruise flight of UAVs.

From slum to suburbia : examining a spectrum of planned and unplanned urban morphology in humid sub-tropical regions of the world

The current rapid urban growth throughout the world manifests in various ways and historically cities have grown, similarly, alternately or simultaneously between planned extensions and organic informal settlements (Mumford, 1989). Within cities different urban morphological regions can reveal different contexts of economic growth and/or periods of dramatic social/technological change (Whitehand, 2001, 105). Morpho-typological study of alternate contexts can present alternative models and contribute to the present discourse which questions traditional paradigms of urban planning and design (Todes et al, 2010). In this study a series of cities are examined as a preliminary exploration into the urban morphology of cities in ‘humid subtropical’ climates. From an initial set of twenty, six cities were selected: Sao Paulo, Brazil; Jacksonville, USA; Maputo, Mozambique; Kanpur, India; Hong Kong, China; and Brisbane, Australia. The urban form was analysed from satellite imagery at a constant scale. Urban morphological regions (types) were identified as those demonstrating particular consistant characteristics of form (density, typology and pattern) different to their surroundings when examined at a constant scale. This analysis was correlated against existing data and literature discussing the proliferation of two types of urban development, ‘informal settlement’ (defined here as self-organised communities identifiable but not always synonymous with ‘slums’) and ‘suburbia’ (defined here as master planned communities of generally detached houses prevalent in western society) - the extreme ends of a hypothetical spectrum from ‘planned’ to ‘spontaneous’ urban development. Preliminary results show some cities contain a wide variety of urban form ranging from the highly organic ‘self-organised’ type to the highly planned ‘master planned community’ (in the case of Sao Paulo) while others tend to fall at one end of the planning spectrum or the other (more planned in the cases of Brisbane and Jacksonville; and both highly planned and highly organic in the case of Maputo). Further research will examine the social, economical and political drivers and controls which lead to this diversity or homogeneity of urban form and speculates on the role of self-organisation as a process for the adaptation of urban form.

Design and construction of fixed bed pyrolysis system and plum seed pyrolysis for bio-oil production

This work investigated the production of bio oil from plum seed (Zyziphus jujuba) by fixed bed pyrolysis technology. A fixed bed pyrolysis system has been designed and fabricated for production of bio oil. The major components of the system are: fixed bed reactor, liquid condenser and liquid collector. Nitrogen gas was used to maintain the inert atmosphere in the reactor where the pyrolysis reaction takes place. The feedstock considered in this study is plum seed as it is available waste material in Bangladesh. The reactor is heated by means of a cylindrical biomass external heater. Rice husk was used as the energy source. The products are oil, char and gas. The parameters varied are reactor bed temperature, running time and feed particle size. The parameters are found to influence the product yields significantly. The maximum liquid yield of 39 wt% at 5200C for a feed particle size of 2.36-4.75 mm and a gas flow rate of 8 liter/min with a running time of 120 minute. The pyrolysis oil obtained at these optimum process conditions are analyzed for some of their properties as an alternative fuel. The density of the liquid was closer with diesel. The viscosity of the plum seed liquid was lower than that of the conventional fuels. The calorific value of the pyrolysis oil is one half of the diesel fuel.

The future of design

When asked about the future of design, I immediately think of two things. Firstly, I am drawn to the concept of design thinking - the process individuals go through when critically evaluating a situation, place, space or circumstance and reframing it. Design thinking is the critical reframing process. Secondly, my thoughts turn to education and the teaching of design thinking and the late philosopher John Dewey (1910:139), who states...

A Systems-level approach to building sustainable assessment cultures : moderation, quality task design and dependability of judgement

This paper considers the conditions that are necessary at system and local levels for teacher assessment to be valid, reliable and rigorous. With sustainable assessment cultures as a goal, the paper examines how education systems can support local level efforts for quality learning and dependable teacher assessment. This is achieved through discussion of relevant research and consideration of a case study involving an evaluation of a cross-sectoral approach to promoting confidence in school-based assessment in Queensland, Australia. Building on the reported case study, essential characteristics for developing sustainable assessment cultures are presented, including: leadership in learning; alignment of curriculum, pedagogy and assessment; the design of quality assessment tasks and accompanying standards, and evidence-based judgement and moderation. Taken together, these elements constitute a new framework for building assessment capabilities and promoting quality assurance.

A holistic blended design studio model : Exploring and expanding learning opportunities

This book involves a comprehensive study of the learning environment by adopting Grounded Theory methodology in a qualitative comparative way.It explores the limitations and benefits of a face-to-face and a virtual design studio as experienced by architecture students and educators at an Australian university in order to find the optimal combination for a blended environment to enhance the students’ experience. The main outcome:holistic multidimensional blended learning model,that through the various modalities,provides adaptive capacity in a range of settings.The model facilitates learning through self-determination,self-management,and the personalisation of the learning environment. Another outcome:a conceptual design education framework,provides a basic tool for educators to evaluate existing learning environments and to develop new learning environments with enough flexibility to respond effectively to a highly dynamic and increasingly technological world.The provision of a practical framework to assist design schools to improve their educational settings according to a suitable pedagogy that meets today’s needs and accommodates tomorrow’s changes.

Creating new possibilities : using design processes to overcome constraints

This paper describes how a team from a large company, when faced with a challenge to develop new customers in fast growing international markets, carried out the exploration of the needs of new clients in the largely unexplored market space of a developing country. This team used design methods and processes to identify the latent needs of new customers in situations of major economic, geographical, cultural and financial constraints. This encapsulation of the life experiences of potential customers is used extensively in some new product development, but is largely novel to business practices and in processes of developing new services. This research links with the sub-theme of discovering creativity in necessity and highlights the potential benefits of design methodologies to create new possibilities for better accessibility of the company’s products to new clients, with future implications for organizational strategy. The overall theme of Design for the Colloquium encourages exploration of the ways and means of developing new ideas for new business with better outcomes, using design concepts and design technologies.

Integrating driving and traffic simulators to study railway level crossing safety interventions : a methodology

Safety at Railway Level Crossings (RLXs) is an important issue within the Australian transport system. Crashes at RLXs involving road vehicles in Australia are estimated to cost $10 million each year. Such crashes are mainly due to human factors; unintentional errors contribute to 46% of all fatal collisions and are far more common than deliberate violations. This suggests that innovative intervention targeting drivers are particularly promising to improve RLX safety. In recent years there has been a rapid development of a variety of affordable technologies which can be used to increase driver’s risk awareness around crossings. To date, no research has evaluated the potential effects of such technologies at RLXs in terms of safety, traffic and acceptance of the technology. Integrating driving and traffic simulations is a safe and affordable approach for evaluating these effects. This methodology will be implemented in a driving simulator, where we recreated realistic driving scenario with typical road environments and realistic traffic. This paper presents a methodology for evaluating comprehensively potential benefits and negative effects of such interventions: this methodology evaluates driver awareness at RLXs , driver distraction and workload when using the technology . Subjective assessment on perceived usefulness and ease of use of the technology is obtained from standard questionnaires. Driving simulation will provide a model of driving behaviour at RLXs which will be used to estimate the effects of such new technology on a road network featuring RLX for different market penetrations using a traffic simulation. This methodology can assist in evaluating future safety interventions at RLXs.

Public realm and transport, international best practice case studies and opportunities for Brisbane

This report was prepared for Lat 27 Pty Ltd for the purpose of conducting a City Centre Public Realm and Active Transport Study for Urban Renewal Brisbane, Brisbane City Council. In this review, we highlight some key learnings and recommendations from innovative projects across the globe to inform public realm design and help facilitate active transport in subtropical Brisbane. Traditionally, Australian cities have been have been based on northern European models. This report is informed by the view that planners and urban designers must look beyond that paradigm to redefine and re-conceptualise our city in a different way, one that values our unique local identity and climate. In re-designing Brisbane’s public realm, therefore, design interventions and responses must celebrate our unique identity and outdoor lifestyle and address the subtropical climate's reality of life in warm humid summers and cool dry winters. The current period of rapid urban change, and the imperative to adapt to climate change, together offer an opportunity to prioritise and integrate design features that provide shade and shelter from sun and summer rain, open and permeable urban environments that facilitate cooling air movement, and connections to water and nature, so that the urban built form co-exists within an inviting, functional and memorable natural landscape. To inform this transformation, this review provides insight into international experiences and best practices. To date, although there is much practice-based knowledge, academic studies outlining learnings and recommendations from case studies (especially in a subtropical context) remain rare. Thus, a range of sources (industry reports, websites, journal articles and books) have been utilised.

Challenges in passenger terminal design : a conceptual model of passenger experience

In recent years, de-regulation in the airline industry and the introduction of low-cost carriers have conspired to produce significant changes in the airport landscape. From an airport operator’s perspective, one of the most notable has been the shift of capital revenue from traditional airline sources (through exclusive use, long term lease arrangements) to passengers (by way of fees collected from ticket sales). As a result of these developments, passengers have become recognized as major stakeholders who have the power to influence airport profitability. This link between passenger satisfaction and profitability has generated industry wide interest in the “passenger experience”. In this paper, we define the factors which influence passenger experience, namely (a) artifacts, (b) services and (c) the terminal building, and explore the challenges that exist in the current approaches to terminal design. On the basis of these insights, we propose a conceptual model of passenger experience, and motivate its use as a framework for further research into improving terminal design from a passenger oriented perspective.

A sequential Monte Carlo approach to the sequential design for discriminating between rival continuous data models

Here we present a sequential Monte Carlo approach to Bayesian sequential design for the incorporation of model uncertainty. The methodology is demonstrated through the development and implementation of two model discrimination utilities; mutual information and total separation, but it can also be applied more generally if one has different experimental aims. A sequential Monte Carlo algorithm is run for each rival model (in parallel), and provides a convenient estimate of the marginal likelihood (of each model) given the data, which can be used for model comparison and in the evaluation of utility functions. A major benefit of this approach is that it requires very little problem specific tuning and is also computationally efficient when compared to full Markov chain Monte Carlo approaches. This research is motivated by applications in drug development and chemical engineering.

The Convergent Media Policy Moment

This paper will consider some of the wider contextual and policy questions arising out of four major public inquiries that took place in Australia over 2011–2012: the Convergence Review, the National Classification Scheme Review, the Independent Media Inquiry (Finkelstein Review) and the National Cultural Policy. This paper considers whether we are now witnessing a ‘convergent media policy moment’ akin to the ‘cultural policy moment’ theorized by Australian cultural researchers in the early 1990s, and the limitations of various approaches to understanding policy – including critiques of neoliberalism – in understanding such shifts. It notes the rise of ‘soft law’ as a means of addressing the challenges of regulatory design in an era of rapid media change, with consideration of two cases: the approach to media influence taken in the Convergence Review, and the concept of ‘deeming’ developed in the National Classification Scheme Review.