Correlação linear e espacial entre produtividade de Brachiaria brizantha, densidade do solo e porosidade total em função do sistema de manejo do solo

A densidade e a porosidade são propriedades físicas do solo que são alteradas em função do sistema de manejo utilizado, com consequente influência sobre a produtividade das culturas. A produtividade da planta forrageira, Brachiaria brizantha, em função da densidade do solo e da porosidade total foi analisada em dois sistemas de manejo de solo, em experimento conduzido no segundo semestre de 2009, no município de Santa Teresa, no Estado do Espírito Santo. O objetivo foi estudar a variabilidade e as correlações lineares e espaciais entre os atributos da planta e do solo, visando a selecionar um indicador da qualidade física do solo de boa representatividade para produtividade de forragem. Marcaram-se duas parcelas de 40 m por 50 m a cada 5 m, em duas direções, resultando em um reticulado retangular de 99 pontos, em cada um dos sistemas utilizados: preparo convencional e plantio direto. Os atributos estudados, além de não terem variado aleatoriamente, apresentaram variabilidade dos dados entre média e alta, e seguiram padrões espaciais bem definidos, com alcance entre 20,3 e 24,2 m. Por sua vez, a correlação linear entre o atributo da planta e os do solo, em função do elevado número de observações, foi baixa. A melhor correlação para produtividade de matéria seca foi com a densidade do solo na profundidade de 0,0 - 0,15 m, independentemente do sistema de manejo do solo, indicando que a produtividade e a densidade do solo são inversamente proporcionais. Portanto, a densidade do solo avaliada na camada de 0,0 - 0,15 m apresentou-se como satisfatório indicador da qualidade física do solo, quando se considerou a produtividade da forrageira.

Potential of utilization of rain water excess for irrigation of green roofs in Mato Grosso, Brasil

The aim of this study was to identify the relation between the evapotranspirometer demand and the supply of water from local rainfall, evaluating the possibility of using water excess for irrigation of Green Roofs in the State of Mato Grosso, in Brazil. The study was done using a series of historical data provided by the National Institute of Meteorology (INMET - Instituto Nacional de Meteorologia) which has official climatological stations in 12 cities and regions of the State. The evapotranspiration values were obtained by the Penman-Monteith method and by the Climatic Water Balance (CWB) by the Thornthwaite and Mather method using Available Water Capacity (AWC) of 12mm. With the CWB the excess and deficit were calculated, which were used for the estimative of the volume and area of a reservoir as a function of a collector area of a roof of 100m² and the volume of supplementary water for irrigation. With the obtained results, it was found that in most investigated regions of the State the use of green roofs is not compromised by the water deficiency. On the other hand, the use of a reservoir to accumulate the rain water excess may be impractical, because it requires a considerable area for installation and also because of the high cost of the land.

Influência local em um modelo espacial linear da produtividade da soja utilizando distribuição t-Student

O uso das ferramentas da geoestatística, aliadas à agricultura de precisão permitem o acompanhamento das áreas agrícolas produtoras de soja, estabelecendo as relações de dependência espacial entre os pontos amostrados. A modelagem da estrutura de variabilidade espacial possibilita a construção de mapas temáticos dos atributos estudados, utilizando como método de interpolação a krigagem. Porém, a presença de valores atípicos entre os elementos amostrais pode influenciar na construção e interpretação desses mapas. A distribuição de probabilidades t-Student tem sido utilizada na tentativa de diminuir a influência dos valores atípicos durante a estimativa dos parâmetros de dependência espacial, por ter caudas mais pesadas que a distribuição normal. A detecção dos valores influentes na área em estudo, por meio da análise de diagnósticos de influência local, confere maior confiabilidade na utilização dos mapas gerados, corroborando a aplicação de insumos. Deste modo, o objetivo deste trabalho foi aplicar as técnicas de influência local em dados espacialmente referenciados, com os modelos de perturbação aditiva e utilizando a matriz escala, considerando a distribuição t-Student n-variada. Foi utilizado um modelo espacial linear para o estudo de dados da produtividade da soja em função da altura média de plantas e do número médio de vagens por planta. As técnicas de influência local foram eficientes para detectar pontos que influenciam na escolha do modelo geoestatístico, nas estimativas dos parâmetros e na construção do mapa temático.

Effects of maintenance management procedures in sugarcane mechanic harvesting system equipment

ABSTRACT The aim of this study was to evaluate the effects of modifying the maintenance programming of equipment used in sugarcane mechanical harvesting, by transferring actions that can be planned to periods when machines are inactive due to meal breaks and other working shift transitions stoppages. A simulation model was developed to represent the maintenance procedures of combines, haulouts, and other vehicles used by a harvest team. Scenarios were tested using alternatives for interventions such as refueling, lubrication and harvester blade replacement, enabling strategies to be focused towards better utilization of cutting, loading, and transport (CLT) system equipment. As a result, it was possible to remove one combine and two haulouts, while maintaining current daily production. The maintenance time for harvesters, which refers to corrective maintenance and the transfer of remaining interventions for periods of inactivity, was reduced from 10.0% to 3.5% over the useful period. This study indicates that maintenance management in the sugarcane sector enables the expanded use of equipment, leading to the greater productivity of the CLT system.

Anastomose esôfago-jejunal látero-lateral com grampeador linear cortante complementada por sutura manual

One of the most difficult procedures in digestive-tract surgery is esophago-jejunal anastomosis following total gastrectomy. Cost/benefit analysis of this procedure justifies the use of mechanical staplers, in spite of their high cost. A technical variant of the side-to-side esophago-jejunal anastomosis is presented, which incorporates the use of a cutting linear stapler. Technical maneuvers are easy to perform, the cost of the cutting linear stapler is smaller than the circular ones, the amplitude of the anastomosis is wider and the likelihood of fistulae is smaller when compared to other techniques. The side-to-side esophago-jejunal anastomosis with the cutting linear stapler is always complemented by a manual suture.

The knapsack problem approach in solving partial hedging problems of options

En option är ett finansiellt kontrakt som ger dess innehavare en rättighet (men medför ingen skyldighet) att sälja eller köpa någonting (till exempel en aktie) till eller från säljaren av optionen till ett visst pris vid en bestämd tidpunkt i framtiden. Den som säljer optionen binder sig till att gå med på denna framtida transaktion ifall optionsinnehavaren längre fram bestämmer sig för att inlösa optionen. Säljaren av optionen åtar sig alltså en risk av att den framtida transaktion som optionsinnehavaren kan tvinga honom att göra visar sig vara ofördelaktig för honom. Frågan om hur säljaren kan skydda sig mot denna risk leder till intressanta optimeringsproblem, där målet är att hitta en optimal skyddsstrategi under vissa givna villkor. Sådana optimeringsproblem har studerats mycket inom finansiell matematik. Avhandlingen "The knapsack problem approach in solving partial hedging problems of options" inför en ytterligare synpunkt till denna diskussion: I en relativt enkel (ändlig och komplett) marknadsmodell kan nämligen vissa partiella skyddsproblem beskrivas som så kallade kappsäcksproblem. De sistnämnda är välkända inom en gren av matematik som heter operationsanalys. I avhandlingen visas hur skyddsproblem som tidigare lösts på andra sätt kan alternativt lösas med hjälp av metoder som utvecklats för kappsäcksproblem. Förfarandet tillämpas även på helt nya skyddsproblem i samband med så kallade amerikanska optioner.

Memristive Computing

Memristive computing refers to the utilization of the memristor, the fourth fundamental passive circuit element, in computational tasks. The existence of the memristor was theoretically predicted in 1971 by Leon O. Chua, but experimentally validated only in 2008 by HP Labs. A memristor is essentially a nonvolatile nanoscale programmable resistor — indeed, memory resistor — whose resistance, or memristance to be precise, is changed by applying a voltage across, or current through, the device. Memristive computing is a new area of research, and many of its fundamental questions still remain open. For example, it is yet unclear which applications would benefit the most from the inherent nonlinear dynamics of memristors. In any case, these dynamics should be exploited to allow memristors to perform computation in a natural way instead of attempting to emulate existing technologies such as CMOS logic. Examples of such methods of computation presented in this thesis are memristive stateful logic operations, memristive multiplication based on the translinear principle, and the exploitation of nonlinear dynamics to construct chaotic memristive circuits. This thesis considers memristive computing at various levels of abstraction. The first part of the thesis analyses the physical properties and the current-voltage behaviour of a single device. The middle part presents memristor programming methods, and describes microcircuits for logic and analog operations. The final chapters discuss memristive computing in largescale applications. In particular, cellular neural networks, and associative memory architectures are proposed as applications that significantly benefit from memristive implementation. The work presents several new results on memristor modeling and programming, memristive logic, analog arithmetic operations on memristors, and applications of memristors. The main conclusion of this thesis is that memristive computing will be advantageous in large-scale, highly parallel mixed-mode processing architectures. This can be justified by the following two arguments. First, since processing can be performed directly within memristive memory architectures, the required circuitry, processing time, and possibly also power consumption can be reduced compared to a conventional CMOS implementation. Second, intrachip communication can be naturally implemented by a memristive crossbar structure.

Customer satisfaction data utilization: identifying value drivers and information use practices

The objective of this master’s thesis was twofold: first to examine the concept of customer value and its drivers and second to identify information use practices. The first part of the study represents explorative research that was carried out by examining a case company’s customer satisfaction data that was used to identify sales and technical customer service related value drivers on a detailed attribute level. This was followed by an examination of whether these attributes had been commented on in a positive or a negative light and what were the reasons why the case company had received higher or lower ratings than its competitor. As a result a classification of different sales and technical customer service related attributes was created. The results indicated that the case company has performed well, but that the results varied on the company’s business segment level. The case company’s staff, service and the benefits from a long-lasting relationship came up in a positive light whereas attitude, flexibility and reaction time came up in a negative light. The reasons for a higher or lower score in comparison to competitor varied. The results indicated that a customer’s satisfaction with the company’s performance did not always mean that the company was outperforming the competition. The second part of the study focused on customer satisfaction information use from the viewpoints of information access, dissemination and reaction. The study was conducted by running an internal survey among the case company’s staff. The results showed that information use practices varied across the company and some units or teams had taken a more proactive approach to the information use than others.

Utilization of non ferrous metals in boiler combustion environment

The made research is focused on possibility of application of non ferrous metals in boiler pressure parts as a substitute of currently used ferrous-base alloys. The main issue was to define resistive ability of some perspective non ferrous metals to chlorine induced corrosion. Experimental study was performed using simultaneous thermal analysis (STA) in the temperature range of 400-700 °C. The chloride induced corrosion was simulated by mixtures of metal samples with potassium chloride treated by synthetic air. The advantage of synergetic effect of non ferrous alloys compare to single metals is shown due to the obtained data from conducted thermal balance tests.

Structural and operational optimisation : applications in energy systems

In this work mathematical programming models for structural and operational optimisation of energy systems are developed and applied to a selection of energy technology problems. The studied cases are taken from industrial processes and from large regional energy distribution systems. The models are based on Mixed Integer Linear Programming (MILP), Mixed Integer Non-Linear Programming (MINLP) and on a hybrid approach of a combination of Non-Linear Programming (NLP) and Genetic Algorithms (GA). The optimisation of the structure and operation of energy systems in urban regions is treated in the work. Firstly, distributed energy systems (DES) with different energy conversion units and annual variations of consumer heating and electricity demands are considered. Secondly, district cooling systems (DCS) with cooling demands for a large number of consumers are studied, with respect to a long term planning perspective regarding to given predictions of the consumer cooling demand development in a region. The work comprises also the development of applications for heat recovery systems (HRS), where paper machine dryer section HRS is taken as an illustrative example. The heat sources in these systems are moist air streams. Models are developed for different types of equipment price functions. The approach is based on partitioning of the overall temperature range of the system into a number of temperature intervals in order to take into account the strong nonlinearities due to condensation in the heat recovery exchangers. The influence of parameter variations on the solutions of heat recovery systems is analysed firstly by varying cost factors and secondly by varying process parameters. Point-optimal solutions by a fixed parameter approach are compared to robust solutions with given parameter variation ranges. In the work enhanced utilisation of excess heat in heat recovery systems with impingement drying, electricity generation with low grade excess heat and the use of absorption heat transformers to elevate a stream temperature above the excess heat temperature are also studied.

Measuring effects of strategic utilization of social media in business-to-business marketing: Case Greenlux Finland Oy

Utilization of social media is increasingly common in B2B marketing. Social media is an efficient and cheap marketing and communication channel available for everyone, and thus extremely attractive marketing medium. The more companies get involved in social media the more failures are reported. It is not enough for a company to just be present in social media. Succeeding on it requires hard work, investing time and money, and ability to measure and to monitor performance. With an increasing number of companies failing in utilizing social media, together with lack of research on strategic utilization of social media focusing on B2B marketing, measuring, and monitoring create a purpose for this research. The aim of this research is to discover methods for measuring and monitoring effects of strategic utilization of social media in B2B marketing. Most relevant financial and non-financial indicators are discussed, and the methods by which these can be monitored and measured. In addition, effects of strategic utilization of social media on the case company are measured and analyzed. The research methodology used in this research is a participatory action research, which includes elements of both qualitative and quantitative research methods. The case company examined in the research provides a unique opportunity to follow through all phases of strategic utilization of social media for B2B marketing purposes concluding real effects of social media to the case company, and thus gain a deep understanding about this new marketing medium in the perspective of B2B marketing. Duration of the research period is seven months. During this time, information is collected, measured, and analyzed. Case company does not have any other marketing activities simultaneously which makes it possible to examine social media apart from effects of other visible marketing activities. Effects of strategic utilization of social media can be monitored and measured in many ways. Methods that should be used depend on goals set for social media. Fundamental nature of social media requires multidimensional assessment, and thus effects should be measured, and monitored considering both financial and non-financial indicators. The results implicates that effects of strategic utilization of social media are relatively wide ranged. According to the findings, social media affects positively on brand, number of web page visitors, visitor behavior, and on distribution of awareness. According to investment calculations social media is a legitimate investment for case company. Results also implicate that by using social media case company gains conversation, arouses interest, gets attention, and creates interactivity. In addition and as a side note, winter holiday season appears to have a great effect on social media activity of B2B companies’ representatives.

Utilization of Particle Image velocimetry in PPOOLEX condensation experiments

Particle Image Velocimetry, PIV, is an optical measuring technique to obtain velocity information of a flow in interest. With PIV it is possible to achieve two or three dimensional velocity vector fields from a measurement area instead of a single point in a flow. Measured flow can be either in liquid or in gas form. PIV is nowadays widely applied to flow field studies. The need for PIV is to obtain validation data for Computational Fluid Dynamics calculation programs that has been used to model blow down experiments in PPOOLEX test facility in the Lappeenranta University of Technology. In this thesis PIV and its theoretical background are presented. All the subsystems that can be considered to be part of a PIV system are presented as well with detail. Emphasis is also put to the mathematics behind the image evaluation. The work also included selection and successful testing of a PIV system, as well as the planning of the installation to the PPOOLEX facility. Already in the preliminary testing PIV was found to be good addition to the measuring equipment for Nuclear Safety Research Unit of LUT. The installation to PPOOLEX facility was successful even though there were many restrictions considering it. All parts of the PIV system worked and they were found out to be appropriate for the planned use. Results and observations presented in this thesis are a good background to further PIV use.

The effects of location, feedstock availability, and supply-chain logistics on the greenhouse gas emissions of forest-biomass energy utilization in Finland

Forest biomass represents a geographically distributed feedstock, and geographical location affects the greenhouse gas (GHG) performance of a given forest-bioenergy system in several ways. For example, biomass availability, forest operations, transportation possibilities and the distances involved, biomass end-use possibilities, fossil reference systems, and forest carbon balances all depend to some extent on location. The overall objective of this thesis was to assess the GHG emissions derived from supply and energy-utilization chains of forest biomass in Finland, with a specific focus on the effect of location in relation to forest biomass’s availability and the transportation possibilities. Biomass availability and transportation-network assessments were conducted through utilization of geographical information system methods, and the GHG emissions were assessed by means of lifecycle assessment. The thesis is based on four papers in which forest biomass supply on industrial scale was assessed. The feedstocks assessed in this thesis include harvesting residues, smalldiameter energy wood and stumps. The principal implication of the findings in this thesis is that in Finland, the location and availability of biomass in the proximity of a given energyutilization or energy-conversion plant is not a decisive factor in supply-chain GHG emissions or the possible GHG savings to be achieved with forest-biomass energy use. Therefore, for the greatest GHG reductions with limited forest-biomass resources, energy utilization of forest biomass in Finland should be directed to the locations where most GHG savings are achieved through replacement of fossil fuels. Furthermore, one should prioritize the types of forest biomass with the lowest direct supply-chain GHG emissions (e.g., from transport and comminution) and the lowest indirect ones (in particular, soil carbon-stock losses), regardless of location. In this respect, the best combination is to use harvesting residues in combined heat and power production, replacing peat or coal.