Food Content of Six Commercial Fishes from Mississippi Sound

Specific dietary contents from six fishes collected in Mississippi Sound are recorded. In order of their importance, primary components grouped in major taxonomic categories were fishes, penaeid shrimps, and other crustaceans for Cynoscion nebulosus; Crustaceans and fishes for C. arenarius; fishes and crustaceans for C. nothus; crustaceans, pelecypods, and polychaetes for Pogonias cromis; crustaceans, molluscs, polychaetes, and fishes for Archosargus probatocephalus; and fishes and penaeid shrimps for Paralichthys lethostigma. Principal items in the diets of most of the fishes included Anchoa mitchilli, Penaeus aztecus, P. setiferus, and Callinectes sapidus. Those crustaceans show that competition exists for commercial shellfishes in Mississippi Sound. Ratios among the different dietary items vary, according at least to species of fish, length of fish, season, specific location, and abundance of available prey. Some of these variations are documented and are additionally related to selected findings by other authors sampling different localities. We suggest that examination of food items in Archosargus probatocephalus can serve as a practical means to sample and assess seasonal prevalence and abundance of a wide range of invertebrates throughout different habitats in Mississippi Sound and elsewhere.

Performance Analysis of Sparse Traffic Grooming in WDM Mesh Networks

Sparse traffic grooming is a practical problem to be addressed in heterogeneous multi-vendor optical WDM networks where only some of the optical cross-connects (OXCs) have grooming capabilities. Such a network is called as a sparse grooming network. The sparse grooming problem under dynamic traffic in optical WDM mesh networks is a relatively unexplored problem. In this work, we propose the maximize-lightpath-sharing multi-hop (MLS-MH) grooming algorithm to support dynamic traffic grooming in sparse grooming networks. We also present an analytical model to evaluate the blocking performance of the MLS-MH algorithm. Simulation results show that MLSMH outperforms an existing grooming algorithm, the shortest path single-hop (SPSH) algorithm. The numerical results from analysis show that it matches closely with the simulation. The effect of the number of grooming nodes in the network on the blocking performance is also analyzed.

Livestock Protection Dogs for Deterring Deer From Cattle and Feed

Disease transmission between wildlife and livestock is a worldwide issue. Society needs better methods to prevent interspecies transmission to reduce disease risks. Producers have successfully used livestock protection dogs (LPDs) for thousands of years to reduce predation. We theorized that LPDs raised and bonded with cattle could be used to also reduce risk of bovine tuberculosis (Myobacterium bovis; TB) transmission between white-tailed deer (Odocoileus virginianus) and cattle by minimizing contact between the 2 species and use of cattle feed by deer. We evaluated 4 LPDs over 5 months, utilizing 2 data collection methods (direct observation and motion-activated video) on deer farms that supported higher densities than wild populations. Dogs were highly effective in preventing deer from using concentrated cattle feed (hay bales), likely the greatest risk factor of TB transmission on farms. Dogs also prevented deer from approaching cattle in core areas of pastures (near hay bales) and were very effective throughout pastures. Our research supports the theory that LPDs, specifically trained to remain with cattle, may be a practical tool to minimize potential for livestock to contract TB from infected deer in small-scale cattle operations. Where disease is present in deer, it may be possible to reduce the potential for disease transmission by employing LPDs.

My life as a clone

Zehar, an extremely popular and dignified man, is a renowned scientist. He has worked extremely hard, and spend two years, on a research to make human cloning.His idea was to produce the creature, simply of its own looking and exactly identical as him. To his satisfaction he had accomplished to make the physical characteristic, simply like his own. Even his experiment on a mentality and emotional aspect of a clone was also a success. But his last and the most vital wish, remained a complete failure. He wanted that the soul of the cloning should also be identical like his own soul, as the physical characteristics. But it was a complete different. The character of the cloning was getting too dangerous and later part he found he has to lose all his sympathy of his own clone, as his clone had became the most dangerous enemy in his life. All his fame and his moral character is being uprooted to the public by his clone. Ultimately he decides to kill it, and clone even takes a motto to kill Zehar, if Zehar decides to kill it, simply because, the clone wants to create his own fame to rule the world. Thus the story, gives an advice, to the world of science, that not to try human clones, in particular.

Necessidades de saúde, políticas públicas e gênero: a perspectiva das práticas profissionais

Examina-se a relação entre políticas públicas e práticas dos profissionais, relativamente às necessidades de saúde. Em abordagem teórico-conceitual, as práticas são definidas como desempenhos permeados por determinantes técnico-cien­tíficos e sócio-históricos para a produção social de um trabalho, analisando-se suas possibilidades de mudanças culturais, éticas e políticas, para um agir crítico das desigualdades de gênero. Tomando-se a atenção integral à saúde dos homens, examina-se a relevância da distinção entre necessidades masculinas e femininas, enquanto realidades parciais não necessariamente convergentes na (re)produção daquelas desigualdades. Igualmente se examinam as práticas profissionais, como realidade parcial e distinta das políticas, estabelecendo relações não imediatas. Desenvolve-se que são obstáculos simbólicos e práticos para mudanças: a normalização biomédica redutora das necessidades, a cultura do trabalho autônomo e da abordagem individualizante das necessidades, a cultura tradicional de gênero conservando práticas desiguais para homens e mulheres e a ausência de inscrição dos direitos como parte do agir profissio­nal. Isto exige propostas específicas às práticas de saúde e às necessidades masculinas para maior convergência com as reformas das políticas.

Predicting Delta Ferrite Content in Stainless Steel Castings

The distribution of delta ferrite fraction was measured with the magnetic method in specimens of different stainless steel compositions cast by the investment casting (lost wax) process. Ferrite fraction measurements published in the literature for stainless steel cast samples were added to the present work data, enabling an extensive analysis about practical methods to calculate delta ferrite fractions in stainless steel castings. Nineteen different versions of practical methods were formed using Schaeffler, DeLong, and Siewert diagrams and the nickel and chromium equivalent indexes suggested by several authors. These methods were evaluated by a detailed statistical analysis, showing that the Siewert diagram, including its equivalent indexes and iso-ferrite lines, gives the lowest relative errors between calculated and measured delta ferrite fractions. Although originally created for stainless steel welds, this diagram gives relative errors lower than those for the current ASTM standard method (800/A 800M-01), developed to predict ferrite fractions in stainless steel castings. Practical methods originated from a combination of different chromium/nickel equivalent indexes and the iso-ferrite lines from Schaeffler diagram give the lowest relative errors when compared with combinations using other iso-ferrite line diagrams. For the samples cast in the present work, an increase in cooling rate from 0.78 to 2.7 K/s caused a decrease in the delta ferrite fraction, but a statistical hypothesis test revealed that this effect is significant in only 50% of the samples that have ferrite in their microstructures.

TITANS OF CAPITALISM IN THE MODERNIZATION OF BRAZILIAN TERRITORY: URBAN AND AWARDS PUBLIC ASSISTANCE DURING THE FIRST REPUBLIC (1889-1930)

In Brazil, the newly created Republic expressed interests of the elite increasingly committed to foreign capital. The Rio de Janeiro saw accumulate vast resources in trade and finance, deriving for industrial applications. The city appears as articulator of Brazilian territory and mediation between it and the international market. In the capital of the Republic, the conservative plan would sweep the old city and inaugurate images copied from Europe and installed in the tropics with civilizing purpose. This materialized with infrastructure financing and loans to entrepreneurs in Europe and North America, awarded public service concessions. The project relied on strong support of mayors (members or representatives of the companies involved in the reforms). This work aims to address the relationship between the mayors of Rio de Janeiro during the First Republic and international capital, focusing on strategies for the production of new spaces in motion the modernization of Brazil and its international image.

QuMinS: fast and scalable querying, mining and summarizing multi-modal databases

Given a large image set, in which very few images have labels, how to guess labels for the remaining majority? How to spot images that need brand new labels different from the predefined ones? How to summarize these data to route the user’s attention to what really matters? Here we answer all these questions. Specifically, we propose QuMinS, a fast, scalable solution to two problems: (i) Low-labor labeling (LLL) – given an image set, very few images have labels, find the most appropriate labels for the rest; and (ii) Mining and attention routing – in the same setting, find clusters, the top-'N IND.O' outlier images, and the 'N IND.R' images that best represent the data. Experiments on satellite images spanning up to 2.25 GB show that, contrasting to the state-of-the-art labeling techniques, QuMinS scales linearly on the data size, being up to 40 times faster than top competitors (GCap), still achieving better or equal accuracy, it spots images that potentially require unpredicted labels, and it works even with tiny initial label sets, i.e., nearly five examples. We also report a case study of our method’s practical usage to show that QuMinS is a viable tool for automatic coffee crop detection from remote sensing images.

Asset management of wastewater networks

Asset Management (AM) is a set of procedures operable at the strategic-tacticaloperational level, for the management of the physical asset’s performance, associated risks and costs within its whole life-cycle. AM combines the engineering, managerial and informatics points of view. In addition to internal drivers, AM is driven by the demands of customers (social pull) and regulators (environmental mandates and economic considerations). AM can follow either a top-down or a bottom-up approach. Considering rehabilitation planning at the bottom-up level, the main issue would be to rehabilitate the right pipe at the right time with the right technique. Finding the right pipe may be possible and practicable, but determining the timeliness of the rehabilitation and the choice of the techniques adopted to rehabilitate is a bit abstruse. It is a truism that rehabilitating an asset too early is unwise, just as doing it late may have entailed extra expenses en route, in addition to the cost of the exercise of rehabilitation per se. One is confronted with a typical ‘Hamlet-isque dilemma’ – ‘to repair or not to repair’; or put in another way, ‘to replace or not to replace’. The decision in this case is governed by three factors, not necessarily interrelated – quality of customer service, costs and budget in the life cycle of the asset in question. The goal of replacement planning is to find the juncture in the asset’s life cycle where the cost of replacement is balanced by the rising maintenance costs and the declining level of service. System maintenance aims at improving performance and maintaining the asset in good working condition for as long as possible. Effective planning is used to target maintenance activities to meet these goals and minimize costly exigencies. The main objective of this dissertation is to develop a process-model for asset replacement planning. The aim of the model is to determine the optimal pipe replacement year by comparing, temporally, the annual operating and maintenance costs of the existing asset and the annuity of the investment in a new equivalent pipe, at the best market price. It is proposed that risk cost provide an appropriate framework to decide the balance between investment for replacing or operational expenditures for maintaining an asset. The model describes a practical approach to estimate when an asset should be replaced. A comprehensive list of criteria to be considered is outlined, the main criteria being a visà- vis between maintenance and replacement expenditures. The costs to maintain the assets should be described by a cost function related to the asset type, the risks to the safety of people and property owing to declining condition of asset, and the predicted frequency of failures. The cost functions reflect the condition of the existing asset at the time the decision to maintain or replace is taken: age, level of deterioration, risk of failure. The process model is applied in the wastewater network of Oslo, the capital city of Norway, and uses available real-world information to forecast life-cycle costs of maintenance and rehabilitation strategies and support infrastructure management decisions. The case study provides an insight into the various definitions of ‘asset lifetime’ – service life, economic life and physical life. The results recommend that one common value for lifetime should not be applied to the all the pipelines in the stock for investment planning in the long-term period; rather it would be wiser to define different values for different cohorts of pipelines to reduce the uncertainties associated with generalisations for simplification. It is envisaged that more criteria the municipality is able to include, to estimate maintenance costs for the existing assets, the more precise will the estimation of the expected service life be. The ability to include social costs enables to compute the asset life, not only based on its physical characterisation, but also on the sensitivity of network areas to social impact of failures. The type of economic analysis is very sensitive to model parameters that are difficult to determine accurately. The main value of this approach is the effort to demonstrate that it is possible to include, in decision-making, factors as the cost of the risk associated with a decline in level of performance, the level of this deterioration and the asset’s depreciation rate, without looking at age as the sole criterion for making decisions regarding replacements.

Enhanced Mixed Integer Programming Techniques and Routing Problems

Mixed integer programming is up today one of the most widely used techniques for dealing with hard optimization problems. On the one side, many practical optimization problems arising from real-world applications (such as, e.g., scheduling, project planning, transportation, telecommunications, economics and finance, timetabling, etc) can be easily and effectively formulated as Mixed Integer linear Programs (MIPs). On the other hand, 50 and more years of intensive research has dramatically improved on the capability of the current generation of MIP solvers to tackle hard problems in practice. However, many questions are still open and not fully understood, and the mixed integer programming community is still more than active in trying to answer some of these questions. As a consequence, a huge number of papers are continuously developed and new intriguing questions arise every year. When dealing with MIPs, we have to distinguish between two different scenarios. The first one happens when we are asked to handle a general MIP and we cannot assume any special structure for the given problem. In this case, a Linear Programming (LP) relaxation and some integrality requirements are all we have for tackling the problem, and we are ``forced" to use some general purpose techniques. The second one happens when mixed integer programming is used to address a somehow structured problem. In this context, polyhedral analysis and other theoretical and practical considerations are typically exploited to devise some special purpose techniques. This thesis tries to give some insights in both the above mentioned situations. The first part of the work is focused on general purpose cutting planes, which are probably the key ingredient behind the success of the current generation of MIP solvers. Chapter 1 presents a quick overview of the main ingredients of a branch-and-cut algorithm, while Chapter 2 recalls some results from the literature in the context of disjunctive cuts and their connections with Gomory mixed integer cuts. Chapter 3 presents a theoretical and computational investigation of disjunctive cuts. In particular, we analyze the connections between different normalization conditions (i.e., conditions to truncate the cone associated with disjunctive cutting planes) and other crucial aspects as cut rank, cut density and cut strength. We give a theoretical characterization of weak rays of the disjunctive cone that lead to dominated cuts, and propose a practical method to possibly strengthen those cuts arising from such weak extremal solution. Further, we point out how redundant constraints can affect the quality of the generated disjunctive cuts, and discuss possible ways to cope with them. Finally, Chapter 4 presents some preliminary ideas in the context of multiple-row cuts. Very recently, a series of papers have brought the attention to the possibility of generating cuts using more than one row of the simplex tableau at a time. Several interesting theoretical results have been presented in this direction, often revisiting and recalling other important results discovered more than 40 years ago. However, is not clear at all how these results can be exploited in practice. As stated, the chapter is a still work-in-progress and simply presents a possible way for generating two-row cuts from the simplex tableau arising from lattice-free triangles and some preliminary computational results. The second part of the thesis is instead focused on the heuristic and exact exploitation of integer programming techniques for hard combinatorial optimization problems in the context of routing applications. Chapters 5 and 6 present an integer linear programming local search algorithm for Vehicle Routing Problems (VRPs). The overall procedure follows a general destroy-and-repair paradigm (i.e., the current solution is first randomly destroyed and then repaired in the attempt of finding a new improved solution) where a class of exponential neighborhoods are iteratively explored by heuristically solving an integer programming formulation through a general purpose MIP solver. Chapters 7 and 8 deal with exact branch-and-cut methods. Chapter 7 presents an extended formulation for the Traveling Salesman Problem with Time Windows (TSPTW), a generalization of the well known TSP where each node must be visited within a given time window. The polyhedral approaches proposed for this problem in the literature typically follow the one which has been proven to be extremely effective in the classical TSP context. Here we present an overall (quite) general idea which is based on a relaxed discretization of time windows. Such an idea leads to a stronger formulation and to stronger valid inequalities which are then separated within the classical branch-and-cut framework. Finally, Chapter 8 addresses the branch-and-cut in the context of Generalized Minimum Spanning Tree Problems (GMSTPs) (i.e., a class of NP-hard generalizations of the classical minimum spanning tree problem). In this chapter, we show how some basic ideas (and, in particular, the usage of general purpose cutting planes) can be useful to improve on branch-and-cut methods proposed in the literature.

Continuity and Change in New Products

This doctoral dissertation is triggered by an emergent problem: how can firms reinvent themselves? Continuity- and change-oriented decisions fundamentally shape overtime the activities and potential revenues of organizations and other adaptive systems, but both types of actions draw upon limited resources and rely on different organizational routines and capabilities. Most organizations appear to have difficulties in making tradeoffs, so that it is easier to overinvest in one of them than to successfully achieve a mixture of both. Nevertheless, theory and empirical evidence suggest that too little of either may reduce performance, indicating a need to learn more about how organizations reconcile these tensions. In the first paper, I moved from the consideration that rapid changes in competitive environments increasingly require firms to be “ambidextrous” implementing organizational mechanisms and structures that allow continuity- and change-oriented activities to be engaged at the same time. More specifically, I show that continuity- and change-related decisions can’t be confined either inside or outside the firm, but span overtime across distinct decision domains located within and beyond the organizational boundaries. Reconciling static and dynamic perspectives of ambidexterity, I conceptualize a firm’s strategy as a bundle of decisions about product attributes and components of the production team, proposing a multidimensional and dynamic model of structural ambidexterity that explains why and how firms could manage conflicting pressures for continuity and change in the context of new products. In the second study I note how rigorous systematic evidence documenting the success of ambidextrous organizations is lacking, and there has been very little investigation of how firms deal with continuity and change in new products. How to manage the transition form a successful product to another? What to change and what to keep? Incumbents that deal with series of products over time need to update their offerings in order to have the most relevant attributes to prospect clients without disappoint the current customer base. They need to both match and anticipate consumers’ preferences, blending something old with something new to satisfy the current demand and enlarge the herd by appealing to newer audiences. This paper contributes to strategic renewal and ambidexterity-related research with the first empirically assessment of a positive consumer response to ambidexterity in new products. Also, this study provides a practical method to monitor overtime the degree to which a brand or a firm is continuity- or change- oriented and evaluate different strategy profiles across two decision domains that play a pivotal role in new products: product attributes and components of the production team.

L'idea di metafora nell'opera di Oswald Mathias Ungers

This research focuses on the definition of the complex relationship that exists between theory and project, which - in the architectural work by Oswald Mathias Ungers - is based on several essays and on the publications that - though they have never been collected in an organic text - make up an articulated corpus, so that it is possible to consider it as the foundations of a theory. More specifically, this thesis deals with the role of metaphor in Unger’s theory and its subsequent practical application to his projects. The path leading from theoretical analysis to architectural project is in Ungers’ view a slow and mediated path, where theory is an instrument without which it would not be possible to create the project's foundations. The metaphor is a figure of speech taken from disciplines such as philosophy, aesthetics, linguistics. Using a metaphor implies a transfer of meaning, as it is essentially based on the replacement of a real object with a figurative one. The research is articulated in three parts, each of them corresponding to a text by Ungers that is considered as crucial to understand the development of his architectural thinking. Each text marks three decades of Ungers’ work: the sixties, seventies and eighties. The first part of the research deals with the topic of Großform expressed by Ungers in his publication of 1966 Grossformen im Wohnungsbau, where he defines four criteria based on which architecture identifies with a Großform. One of the hypothesis underlying this study is that there is a relationship between the notion of Großform and the figure of metaphor. The second part of the thesis analyzes the time between the end of the sixties and the seventies, i.e. the time during which Ungers lived in the USA and taught at the Cornell University of Ithaca. The analysis focuses on the text Entwerfen und Denken in Vorstellungen, Metaphern und Analogien, written by Ungers in 1976, for the exhibition MAN transFORMS organized in the Cooper - Hewitt Museum in New York. This text, through which Ungers creates a sort of vocabulary to explain the notions of metaphor, analogy, signs, symbols and allegories, can be defined as the Manifesto of his architectural theory, the latter being strictly intertwined with the metaphor as a design instrument and which is best expressed when he introduces the 11 thesis with P. Koolhaas, P. Riemann, H. Kollhoff and A. Ovaska in Die Stadt in der Stadt in 1977. Berlin das grüne Stadtarchipel. The third part analyzes the indissoluble tie between the use of metaphor and the choice of the topic on which the project is based and, starting from Ungers’ publication in 1982 Architecture as theme, the relationship between idea/theme and image/metaphor is explained. Playing with shapes requires metaphoric thinking, i.e. taking references to create new ideas from the world of shapes and not just from architecture. The metaphor as a tool to interpret reality becomes for Ungers an inquiry method that precedes a project and makes it possible to define the theme on which the project will be based. In Ungers’ case, the architecture of ideas matches the idea of architecture; for Ungers the notions of idea and theme, image and metaphor cannot be separated from each other, the text on thematization of architecture is not a report of his projects, but it represents the need to put them in order and highlight the theme on which they are based.

NMR spectroscopy and imaging of hyperpolarized gases

Since the discovery of the nuclear magnetic resonance (NMR) phenomenon, countless NMR techniques have been developed that are today indispensable tools in physics, chemistry, biology, and medicine. As one of the main obstacles in NMR is its notorious lack of sensitivity, different hyperpolarization (HP) methods have been established to increase signals up to several orders of magnitude. In this work, different aspects of magnetic resonance, using HP noble gases, are studied, hereby combining different disciplines of research. The first part examines new fundamental effects in NMR of HP gases, in theory and experiment. The spin echo phenomenon, which provides the basis of numerous modern experiments, is studied in detail in the gas phase. The changes of the echo signal in terms of amplitude, shape, and position, due to the fast translational motion, are described by an extension of the existing theory and computer simulations. With this knowledge as a prerequisite, the detection of intermolecular double-quantum coherences was accomplished for the first time in the gas phase. The second part of this thesis focuses on the development of a practical method to enhance the dissolution process of HP 129Xe, without loss of polarization or shortening of T1. Two different setups for application in NMR spectroscopy and magnetic resonance imaging (MRI) are presented. The continuous operation allows biological and multidimensional spectroscopy in solutions. Also, first in vitro MRI images with dissolved HP 129Xe as contrast agent were obtained at a clinical scanner.

When the Practice of Theorizing Meets the Theorizing of Practice. Social Knowledge Making in Organization Science Academia and Managerial Communities

The aim of the present work is to contribute to a better understanding of the relation between organization theory and management practice. It is organized as a collection of two papers, a theoretical and conceptual contribution and an ethnographic study. The first paper is concerned with systematizing different literatures inside and outside the field of organization studies that deal with the theory-practice relation. After identifying a series of positions to the theory-practice debate and unfolding some of their implicit assumptions and limitations, a new position called entwinement is developed in order to overcome status quo through reconciliation and integration. Accordingly, the paper proposes to reconceptualize theory and practice as a circular iterative process of action and cognition, science and common-sense enacted in the real world both by organization scholars and practitioners according to purposes at hand. The second paper is the ethnographic study of an encounter between two groups of expert academics and practitioners occasioned by a one-year executive business master in an international business school. The research articulates a process view of the knowledge exchange between management academics and practitioners in particular and between individuals belonging to different communities of practice, in general, and emphasizes its dynamic, relational and transformative mechanisms. Findings show that when they are given the chance to interact, academics and practitioners set up local provisional relations that enable them to act as change intermediaries vis-a-vis each other’s worlds, without tying themselves irremediably to each other and to the scenarios they conjointly projected during the master’s experience. Finally, the study shows that provisional relations were accompanied by a recursive shift in knowledge modes. While interacting, academics passed from theory to practical theorizing, practitioners passed from an involved practical mode to a reflexive and quasi-theoretical one, and then, as exchanges proceeded, the other way around.

Macular edema: Miscellaneous

Abstract. This article provides the reader with practical information to be applied to the various remaining causes of macular edema. Some macular edemas linked to ocular diseases like radiotherapy after ocular melanomas remained of poor functional prognosis due to the primary disease. On the contrary, macular edemas occurring after retinal detachment or after some systemic or local treatment use are often temporary. Macular edema associated with epiretinal membranes or vitreomacular traction is the main cause of poor functional recovery. However, the delay to observe a significant improvement of vision after surgery should be long, as usually observed in tractional myopic vitreoschisis. Finally, some circumstances of macular edemas such as hemangiomas or macroaneurysms should be treated, if symptomatic, with the treatments currently used in diabetic macular edema or exudative macular degeneration.