Cedar Point Chaussee

This pictures shows a stream of automobiles making their was down the Cedar Point Chaussee (Chaussee is French for a paved road.) Realizing that access to Cedar Point by the automobile was an essential to the park's success, owner George Boeckling built a road that ran the length of the Cedar Point peninsula. This was a distance of seven miles, beginning at U.S. Route 6 to the entrance of Cedar Point.

Foot of Columbus Avenue, Sandusky, Ohio

The foot of Columbus Avenue in Sandusky, Ohio was the location of Lake Erie steamer service during the years from 1870 to 1930. As this picture shows hundreds of men and women have arrived and parked their automobiles and are preparing to board steamers for Lakeside, Kelleys Island, Cedar Point, and South Bass Island.

A golden anniversary, 1895-1945. Personal side lights of America's first automobile race.

Mode of access: Internet.

Investigating assistive technology to support memory for people with cognitive impairments

Technologies such as automobiles or mobile phones allow us to perform beyond our physical capabilities and travel faster or communicate over long distances. Technologies such as computers and calculators can also help us perform beyond our mental capabilities by storing and manipulating information that we would be unable to process or remember. In recent years there has been a growing interest in assistive technology for cognition (ATC) which can help people compensate for cognitive impairments. The aim of this thesis was to investigate ATC for memory to help people with memory difficulties which impacts independent functioning during everyday life. Chapter one argues that using both neuropsychological and human computing interaction theory and approaches is crucial when developing and researching ATC. Chapter two describes a systematic review and meta-analysis of studies which tested technology to aid memory for groups with ABI, stroke or degenerative disease. Good evidence was found supporting the efficacy of prompting devices which remind the user about a future intention at a set time. Chapter three looks at the prevalence of technologies and memory aids in current use by people with ABI and dementia and the factors that predicted this use. Pre-morbid use of technology, current use of non-tech aids and strategies and age (ABI group only) were the best predictors of this use. Based on the results, chapter four focuses on mobile phone based reminders for people with ABI. Focus groups were held with people with memory impairments after ABI and ABI caregivers (N=12) which discussed the barriers to uptake of mobile phone based reminding. Thematic analysis revealed six key themes that impact uptake of reminder apps; Perceived Need, Social Acceptability, Experience/Expectation, Desired Content and Functions, Cognitive Accessibility and Sensory/Motor Accessibility. The Perceived need theme described the difficulties with insight, motivation and memory which can prevent people from initially setting reminders on a smartphone. Chapter five investigates the efficacy and acceptability of unsolicited prompts (UPs) from a smartphone app (ForgetMeNot) to encourage people with ABI to set reminders. A single-case experimental design study evaluated use of the app over four weeks by three people with severe ABI living in a post-acute rehabilitation hospital. When six UPs were presented through the day from ForgetMeNot, daily reminder-setting and daily memory task completion increased compared to when using the app without the UPs. Chapter six investigates another barrier from chapter 4 – cognitive and sensory accessibility. A study is reported which shows that an app with ‘decision tree’ interface design (ApplTree) leads to more accurate reminder setting performance with no compromise of speed or independence (amount of guidance required) for people with ABI (n=14) compared to a calendar based interface. Chapter seven investigates the efficacy of a wearable reminding device (smartwatch) as a tool for delivering reminders set on a smartphone. Four community dwelling participants with memory difficulties following ABI were included in an ABA single case experimental design study. Three of the participants successfully used the smartwatch throughout the intervention weeks and these participants gave positive usability ratings. Two participants showed improved memory performance when using the smartwatch and all participants had marked decline in memory performance when the technology was removed. Chapter eight is a discussion which highlights the implications of these results for clinicians, researchers and designers.

Optical Wireless Communication for Mobile Platforms

The past few decades have witnessed the widespread adaptation of wireless devices such as cellular phones and Wifi-connected laptops, and demand for wireless communication is expected to continue to increase. Though radio frequency (RF) communication has traditionally dominated in this application space, recent decades have seen an increasing interest in the use of optical wireless (OW) communication to supplement RF communications. In contrast to RF communication technology, OW systems offer the use of largely unregulated electromagnetic spectrum and large bandwidths for communication. They also offer the potential to be highly secure against jamming and eavesdropping. Interest in OW has become especially keen in light of the maturation of light-emitting diode (LED) technology. This maturation, and the consequent emerging ubiquity of LED technology in lighting systems, has motivated the exploration of LEDs for wireless communication purposes in a wide variety of applications. Recent interest in this field has largely focused on the potential for indoor local area networks (LANs) to be realized with increasingly common LED-based lighting systems. We envision the use of LED-based OW to serve as a supplement to RF technology in communication between mobile platforms, which may include automobiles, robots, or unmanned aerial vehicles (UAVs). OW technology may be especially useful in what are known as RF-denied environments, in which RF communication may be prohibited or undesirable. The use of OW in these settings presents major challenges. In contrast to many RF systems, OWsystems that operate at ranges beyond a few meters typically require relatively precise alignment. For example, some laser-based optical wireless communication systems require alignment precision to within small fractions of a degree. This level of alignment precision can be difficult to maintain between mobile platforms. Additionally, the use of OW systems in outdoor settings presents the challenge of interference from ambient light, which can be much brighter than any LED transmitter. This thesis addresses these challenges to the use of LED-based communication between mobile platforms. We propose and analyze a dual-link LED-based system that uses one link with a wide transmission beam and relaxed alignment constraints to support a more narrow, precisely aligned, higher-data-rate link. The use of an optical link with relaxed alignment constraints to support the alignment of a more precisely aligned link motivates our exploration of a panoramic imaging receiver for estimating the range and bearing of neighboring nodes. The precision of such a system is analyzed and an experimental system is realized. Finally, we present an experimental prototype of a self-aligning LED-based link.

Design of bicycling suitability maps for hilly cities

Post-print version. Pictures and tables separated from main text and presented at the end.

FY 2016 Equipment and Vehicle Revolving Fund report

The Equipment and Vehicle Revolving Fund report covers all equipment and vehicle purchases through the highway materials and equipment revolving fund during FY 2016.

How to Efficiently Control the Title and Registration Mail-in Workload Backlog Processing

The Titles and Registration Mail-In Unit of the Department of Motor Vehicles only processes title and registration work that has been mailed in. During the time periods of May through June and November through January, the mail workload backlog becomes overbearing. This research will attempt to find out the cause of this increase backlog during those periods, determine what procedures or steps are currently in place and unnecessarily creating needless work that has a direct correlation with the backlog and deploy a recommendation that will totally eliminate peak time backlog work loads.

Captain Buckle Up and the highway super heroes

This coloring book depicts Captain Buckle Up teaching children why its important to use seat belts properly. It also shows how car seats for children are important.

Cinétique de photolyse d’oxydes d’azote sous rayonnement UV

Le smog photochimique est un phénomène qui prend de l'ampleur dans les grandes villes industrialisées. Il est la cause de plusieurs maladies respiratoires. Son apparition provient majoritairement des polluants émis par les véhicules automobiles, soit les hydrocarbures et les oxydes d'azote. Le rayonnement du soleil interagit avec ces espèces chimiques et le dioxygène présent dans l'atmosphère pour mener à une production d'ozone troposphérique importante. L'ozone en basse altitude endommage les écosystèmes et est nocif pour la santé humaine. Le sujet de recherche est d'abord axé sur la réaction limitante du processus qui crée le smog photochimique : la photolyse du dioxyde d'azote. Quoique cette réaction est assez bien connue dans la littérature en phase gazeuse, les données expérimentales en phase condensée sont manquantes. Les travaux ont été effectués dans le but de combler le manque d'information à ce sujet. En premier lieu, les conditions optimales pour l'isolation du NO[indice inférieur 2] par matrice de gaz rare ont été déterminées. Par la suite, l'irradiation des échantillons du mélange NO[indice inférieur 2] et gaz rare a été effectuée. Par spectroscopie infrarouge à angle rasant, il a été possible de suivre l'évolution de la destruction des molécules de NO[indice inférieur 2] en fonction du temps. Différentes hypothèses sont émises afin d'interpréter les données de cinétique obtenues. Ces hypothèses sont alors testées à partir d'expériences sous-jacentes ou expliquées selon des principes théoriques. Finalement, un modèle exprimant le profil du champ électrique à l'intérieur de films minces a été construit. Ce modèle s'inspire des effets d'interférences observés par spectroscopie d'absorption-réflexion. En guise de conclusion, une proposition d'expérience pour supporter le modèle du champ électrique est décrite. La portée du modèle s'étend à tous les processus impliquant un rayonnement lumineux sur une surface réfléchissante. Bien qu'il serve principalement à expliquer le taux de photolyse observé dans le cadre du projet de maîtrise, le modèle est applicable à plusieurs spectroscopies en réflexion.

Perfil logístico de Volkswagen desde la producción

Este análisis muestra detalladamente la línea de producción de la planta de Volkswagen, ubicada en México en el estado de Puebla. Se describe la capacidad operativa utilizada para satisfacer la demanda de la planta de producción de automóviles más grande de Latinoamérica, siendo clave para mantenerse en el mercado con estándares de calidad altos y contribuir al desarrollo de la economía del país. Asimismo, a nivel regional, esta planta se abastece de proveedores estratégicos ubicados en una zona cercana, ayudando a disminuir costos de transporte de piezas y tiempos de respuesta. Inicialmente se realiza una breve descripción del entorno económico de la empresa a nivel regional y del sector a nivel global para hacer énfasis en lo competitivo que es el mercado de la producción de automóviles. Posteriormente se describe la finalidad que tiene esta misión empresarial soportada por la Universidad del Rosario, donde se afianzan conocimientos importantes sobre un mercado de talla mundial. El siguiente aspecto es un diagnóstico de la empresa, donde se dan a conocer las marcas que hacen parte del grupo Volkswagen y la situación financiera que refleja la marca desde el 2012, revelando los ingresos obtenidos durante el período 2012-2014, gastos operacionales y factores que no se destacan positivamente como un flujo de caja negativo para el 2014. Posteriormente se plasman los conceptos teóricos necesarios para que el lector comprenda las variables inmersas en una planta de producción, destacando la teoría de colas y el diseño del layout de la empresa. Finalmente, se da una descripción detallada del proceso de producción en esta planta, donde se muestra la línea de producción, el ensamble y la importancia de un sistema operativo interno que depende principalmente de una alta inversión de tecnología e ingeniería que permite obtener un mayor beneficio en cada etapa del proceso.

La construcción de sentido (‘sensemaking’) de un entorno estratégico turbulento por parte de los altos directivos: un estudio en una multinacional automotriz

Este artículo presenta los resultados de una investigación realizada al interior de dos contextos. Por un lado, el teórico, en el marco de uno de los discursos más relevantes en los campos de la estrategia organizacional, de la managerial and organizational cognition (MOC) y, en general, de los estudios organizacionales (organization studies): la construcción de sentido (sensemaking). Por el otro, el empírico, en una de las grandes compañías multinacionales del sector automotriz con presencia global. Esta corporación enfrenta una permanente tensión entre lo que dicta la casa matriz, en relación con el cumplimiento de metas y estándares específicos, considerando el mundo entero, y los retos que, teniendo en cuenta lo regional y lo local, experimentan los altos directivos encargados de hacer prosperar la empresa en estos lugares. La aproximación implementada fue cualitativa. Esto en atención a la naturaleza de la problemática abordada y la tradición del campo. Los resultados permiten ampliar el actual nivel de comprensión acerca de los procesos de sensemaking de los altos directivos al enfrentar un entorno estratégico turbulento.