Understanding fusion suppression and enhancement in the (18)O+(58,60,64)Ni systems

Realistic coupled-channel calculation results for the (18)[O] + (58,60,64)Ni systems in the bombarding energy range 34.5 <= E(Lab) <= 6-5 MeV are presented. The overall agreement with existing experimental data is quite good. Our calculations predict an unexpected fusion suppression for above-barrier energies, with an important contribution of the two neutron ((18)O, (16)O) transfer channel couplings. The sub-barrier fusion enhancement and the above barrier suppression, predicted by the calculations, are consistent with the nuclear structure of the Ni region. Comparisons with recently reported similar effects in reactions induced by the (6)He projectile are discussed. (C) 2009 Elsevier B.V. All rights reserved.

Infrared analysis of ion beam irradiated polymers

Irradiation with heavy ions can produce several modifications in the chain structure of polymers. These modifications can be related to scissioning and cross-linking of chemical bonds. which depend on the ion fluence and the density of energy deposited in the material. Stacked thin film Makrofol-KG (R) samples were irradiated with 350 MeV Au(26+) ions and FTIR absorption spectroscopy was used to determine the bond changes in the samples. Data on the absorption bands as a function of the fluence indicated a higher probability for simple-bonds scissioning than for double-bonds scissioning and no dependence on the number of double bonds breaking with ion fluence. Since sample irradiation was done in a non-track-overlapping regime, a novel process for double bonds formation is suggested: the excitation of a site in the material by only one incident ion followed by a double bond formation during the de-excitation process. (C) 2009 Elsevier B.V. All rights reserved.

Reaction mechanisms in the (6)Li+(59)Co system

The reactions induced by the weakly bound (6)Li projectile interacting with the intermediate mass target (59)Co were investigated. Light charged particles singles and alpha-d coincidence measurements were performed at the near barrier energies E(lab) = 17.4, 21.5, 25.5 and 29.6 MeV. The main contributions of the different competing mechanisms are discussed. A statistical model analysis. Continuum-Discretized Coupled-Channels (CDCC) calculations and two-body kinematics were used as tools to provide information to disentangle the main components of these mechanisms. A significant contribution of the direct breakup was observed through the difference between the experimental sequential breakup cross section and the CDCC prediction for the non-capture breakup cross section. (C) 2009 Elsevier B.V. All rights reserved.

alpha-Spectroscopic factor of (16)O(gs) from the (12)C((16)O,(12)C)(16)O reaction

Elastic scattering angular distributions of (16)O + (12)C in the center of mass energy range from 8.55 MeV to 56.57 MeV have been analyzed considering the effect of the exchange of an alpha particle between projectile and target leading to the same nuclei of the entrance channel (elastic-transfer). An alpha particle spectroscopic factor for the ground state of the (16)O was determined. (C) 2011 Elsevier B.V. All rights reserved.

An imaginary potential with universal normalization for dissipative processes in heavy-ion reactions

In this work we present new coupled channel calculations with the Sao Paulo potential (SPP) as the bare interaction, and an imaginary potential with system and energy independent normalization that has been developed to take into account dissipative processes in heavy-ion reactions. This imaginary potential is based on high-energy nucleon interaction in nuclear medium. Our theoretical predictions for energies up to approximate to 100 MeV/nucleon agree very well with the experimental data for the p, n + nucleus, (16)O + (27)Al, (16)O + (60)Ni, (58)Ni + (124)Sn, and weakly bound projectile (7)Li + (120)Sn systems. (C) 2008 Elsevier B.V. All rights reserved.

Study of (9)Be+(12)C elastic scattering at energies near the Coulomb barrier

In this work, angular distribution measurements for the elastic channel were performed for the (9)Be + (12)C reaction at the energies E(Lab) = 13.0, 14.5, 17.3, 19.0 and 21.0 MeV, near the Coulomb barrier. The data have been analyzed in the framework of the double folding Sao Paulo potential. The experimental elastic scattering angular distributions were well described by the optical potential at forward angles for all measured energies. However, for the three highest energies, an enhancement was observed for intermediate and backward angles. This can be explained by the elastic transfer mechanism. (C) 2011 Elsevier B.V. All rights reserved.

Indirect Study of the (2)H(d,p)(3)H and (2)H(d,n)(3)He Reactions at Astrophysical Energies via the Trojan Horse Method

The (2)H(d,p)(3)H and (2)H(d,n)(3)He reactions have been indirectly studied by means of the Trojan Horse Method applied to the quasi-free (2)H((3)He, p(3)H)(1)H (2)H((3)He, n(3)He)(1)H reaction at 18 MeV of beam energy. This is the first experiment where the spectator (here (1)H) has been detected in coincidence with the charged participant, avoiding the limitations of standard neutron detectors. The d - d relative energy has been measured from 1.5 MeV down to 2 keV, at center of mass angles from 40A degrees to 170A degrees. Indirect angular distributions are compared with the direct behaviour in the overlapping regions.

Universal trend for heavy-ion total reaction cross-sections at energies above the Coulomb barrier

Heavy-ion total reaction cross-section measurements for more than 1100 reaction cases covering 61 target nuclei in the range (6)Li-(238)U and 158 projectile nuclei from (2)H to (84)Kr (mostly exotic ones) have been analyzed in a systematic way by using an empirical, three-parameter formula that is applicable to the cases of projectile kinetic energies above the Coulomb barrier. The analysis has shown that the average total nuclear binding energy per nucleon of the interacting nuclei and their radii are the chief quantities that describe the cross-section patterns. A great amount of cross-section data (87%) has been quite satisfactorily reproduced by the proposed formula; therefore, the total reaction cross-section predictions for new, not yet experimentally investigated reaction cases can be obtained within 25% (or much less) uncertainty.

Total reaction cross-sections for light weakly bound systems

We have measured the elastic scattering cross-section for (8)Li + (9)Be and (8)Li + (51)V systems at 19.6 MeV and 18.5 MeV, respectively. We have also extracted total reaction cross sections from the elastic scattering analysis for several light weakly bound systems using the optical model with Woods-Saxon and double-folding-type potentials. Different reduction methods for the total reaction cross-sections have been applied to analyze and compare simultaneously all the systems.

Scientific program of the Radioactive Ion Beams Facility in Brasil (RIBRAS)

The RIBRAS facility (Radioactive Ion Beams in Brasil) is installed in connection with the 8MV Pelletron tandem of the University of Sao Paulo Physics Institute. It consists of two superconducting solenoids which focalize light radioactive secondary beams of low energy, produced by transfer reactions. Recent experimental results include the elastic scattering and transfer reactions of (6)He halo nucleus on (9)Be, (27)Al, (51)V and (120)Sn targets. The elastic scattering and transfer of (8)Li and (7)Be on several targets is also being studied. The transfer reaction (8)Li(p,alpha)(5)He of astrophysical interest was also Studied in the E(cm)=0.2-2.5 MeV energy range.

Low-energy d plus d fusion reactions via the Trojan Horse Method

The bare nucleus S(E) factors for the (2)H(d, p)(3)H and (2)H(d.n)(3)He reactions have been measured for the first time via the Trojan Horse Method off the proton in (3)He from 1.5 MeV down to 2 key. This range overlaps with the relevant region for Standard Big Bang Nucleosynthesis as well as with the thermal energies of future fusion reactors and deuterium burning in the Pre-Main-Sequence phase of stellar evolution. This is the first pioneering experiment in quasi free regime where the charged spectator is detected. Both the energy dependence and the absolute value of the S(E) factors deviate by more than 15% from available direct data with new S(0) values of 57.4 +/- 1.8 MeVb for (3)H + p and 60.1 +/- 1.9 MeV b for (3)He + n. None of the existing fitting curves is able to provide the correct slope of the new data in the full range, thus calling for a revision of the theoretical description. This has consequences in the calculation of the reaction rates with more than a 25% increase at the temperatures of future fusion reactors. (C) 2011 Elsevier By. All rights reserved.

Application of abrupt cut-off models in the analysis of the capacitance spectra of conjugated polymer devices

In this paper, a detailed study of the capacitance spectra obtained from Au/doped-polyaniline/Al structures in the frequency domain (0.05 Hz-10 MHz), and at different temperatures (150-340 K) is carried out. The capacitance spectra behavior in semiconductors can be appropriately described by using abrupt cut-off models, since they assume that the electronic gap states that can follow the ac modulation have response times varying rapidly with a certain abscissa, which is dependent on both temperature and frequency. Two models based on the abrupt cut-off concept, formerly developed to describe inorganic semiconductor devices, have been used to analyze the capacitance spectra of devices based on doped polyaniline (PANI), which is a well-known polymeric semiconductor with innumerous potential technological applications. The application of these models allowed the determination of significant parameters, such as Debye length (approximate to 20 nm), position of bulk Fermi level (approximate to 320 meV) and associated density of states (approximate to 2x10(18) eV(-1) cm(-3)), width of the space charge region (approximate to 70 nm), built-in potential (approximate to 780 meV), and the gap states` distribution.

Uma Técnica de depuração e teste de circuitos integrados usando um microscópio eletrônico

O trabalho tem por objetivo mostrar uma técnica de depuração de circuitos integrados VLSI, utilizando um microscópio eletrônico de varredura (MEV) aliado ao fenômeno de contraste por tensão. São abordadas a descrição da ferramenta, técnicas de observação e depuração dos circuitos, bem como, são sugeridas estratégias de concepção visando facilitar a depuração dos circuitos. Embora tenham sido utilizados circuitos NMOS para realizar as experiências, a técnica é aplicável a circuitos MOS em geral. Resultados experimentais, utilizando circuitos projetados no PGCC, são apresentados.

Remoção de íons Cd2+ de soluções aquosas por eletrodeposição em eletrodos de carbono vítreo reticulado

As soluções aquosas obtidas após o tratamento final de efluentes de processos de eletrodeposição de Cd contém baixas concentrações de íons Cd2+. Neste trabalho determinaram-se as melhores condições para a utilização de eletrodos de carbono vítreo reticulado (CVR) no polimento destas soluções. A eletrodeposição do íon Cd2+ sobre eletrodo de carbono vítreo reticulado de porosidades distintas, 30, 60 e 100 ppi, com e sem recobrimento com polipirrol, foi investigada em soluções aquosas aeradas de ácido sulfúrico e sulfato de potássio em pH 4,8. Sob condições potenciostáticas, uma elevada eficiência de remoção foi obtida para soluções contendo 5 e 10 mg L-1 de íon Cd2+, na faixa de potenciais entre –0,9 e –1,1 V para CVR e em –3,0 V para CVR recoberto com polipirrol (CVR-PPy0). Após cada experimento de eletrodeposição, a diminuição da concentração do íon Cd2+ no eletrólito foi monitorada por voltametria de redissolução anódica. Neste experimenteo, empregando um eletrodo de gota pendente de mercúrio sendo estes resultados comparados com medidas por espectrometria de emissão atômica (ICP). Para o eletrodo de CVR, neste intervalo de potenciais, -0,9 e –1,1 V, a eletrodeposição do íon cádmio é controlada por transporte de massa e a concentração de íons cádmio varia exponencialmente com o tempo, seguindo uma cinética de pseudo primeira ordem. Para a concentração 10 mg L-1 e usando eletrodo de CVR 30 ppi, as eficiências de corrente e de remoção determinadas a -1,1 V após 30 minutos de eletrólise foram, 38 % e 97% , respectivamente. Para eletrodo de CVR 60 ppi foram encontrados 30 % e 99 %, respectivamente. Para o eletrodo de CVR-PPy0 a maior eficiência de remoção encontrada foi de 84% após 90 minutos de eletrólise em –3,0 V, sendo a eficiência de corrente menor do que 2%. A presença de Cd metálico depositado na superfície do eletrodo de CVR e CVR-PPy0 depois da redução em –1,1 V e –3,0 V, respectivamente, foi confirmada por análise de Microscopia Eeletrônica de Varredura (MEV) e espectrometria de energia dispersiva (EDS).

Metodologia de análise de dioxinas em cinzas obtidas da incineração de couro Wet-Blue

O presente trabalho trata da validação de uma metodologia de análise para a determinação de dibenzo-p-dioxinas policloradas (PCDDs) em cinzas obtidas através de um processo de incineração de aparas de couro wet-blue. As dioxinas, compostos de extrema toxicidade, podem ser formadas na superfície das partículas de cinzas em reações de combustão. O mecanismo de formação de PCDDs requer uma atmosfera rica em oxigênio, uma fonte de cloro e a presença na cinza de um metal capaz de catalizar uma reação Deacon. O couro wet-blue apresenta em sua composição os precursores para a formação de dioxinas tais como o cloro e o metal catalisador sódio, cuja presença destes elementos foi comprovada por análises de superfície realizadas no couro e nas cinzas usando as técnicas de Rutherford Back-scattering Spectrometry (RBS) e Microscopia Eletrônica de Varredura (MEV). Desta forma, torna-se necessária a análise de dioxinas em cinzas de couro para especificar seu tratamento e destino final. As cinzas de couro foram obtidas numa unidade de bancada de incineração com reator de leito fixo, processo conhecido como GCC (Gaseificação e Combustão Combinadas). A metodologia utilizada para analisar dioxinas nas cinzas de couro foi baseada no Método 8280B da Agência de Proteção Ambiental dos Estados Unidos da América (EPA-USA). Este método descreve os procedimentos de extração de matrizes específicas, o clean-up para os analitos específicos e a determinação de dioxinas através das técnicas de cromatografia gasosa de alta resolução e espectrometria de massa de baixa resolução. O sucesso da análise depende da preparação dos extratos das amostras, etapa conhecida como clean-up, a qual é descrita minuciosamente neste trabalho, incluindo a montagem das colunas cromatográficas. A eficiência de extração das dioxinas foi obtida com os resultados comparativos das análises entre matrizes contaminadas com solução padrão de dioxinas e o padrão analítico. A validação deste método para análise de dioxinas policloradas em cinzas de couro wet-blue foi considerada satisfatória para os objetivos do trabalho, uma vez que a eficiência de extração de dioxinas obtida ficou dentro dos critérios estabelecidos pelo método.