Conflict-based Method for Conceptual Process Synthesis

The changing business environment demands that chemical industrial processes be designed such that they enable the attainment of multi-objective requirements and the enhancement of innovativedesign activities. The requirements and key issues for conceptual process synthesis have changed and are no longer those of conventional process design; there is an increased emphasis on innovative research to develop new concepts, novel techniques and processes. A central issue, how to enhance the creativity of the design process, requires further research into methodologies. The thesis presentsa conflict-based methodology for conceptual process synthesis. The motivation of the work is to support decision-making in design and synthesis and to enhance the creativity of design activities. It deals with the multi-objective requirements and combinatorially complex nature of process synthesis. The work is carriedout based on a new concept and design paradigm adapted from Theory of InventiveProblem Solving methodology (TRIZ). TRIZ is claimed to be a `systematic creativity' framework thanks to its knowledge based and evolutionary-directed nature. The conflict concept, when applied to process synthesis, throws new lights on design problems and activities. The conflict model is proposed as a way of describing design problems and handling design information. The design tasks are represented as groups of conflicts and conflict table is built as the design tool. The general design paradigm is formulated to handle conflicts in both the early and detailed design stages. The methodology developed reflects the conflict nature of process design and synthesis. The method is implemented and verified through case studies of distillation system design, reactor/separator network design and waste minimization. Handling the various levels of conflicts evolve possible design alternatives in a systematic procedure which consists of establishing an efficient and compact solution space for the detailed design stage. The approach also provides the information to bridge the gap between the application of qualitative knowledge in the early stage and quantitative techniques in the detailed design stage. Enhancement of creativity is realized through the better understanding of the design problems gained from the conflict concept and in the improvement in engineering design practice via the systematic nature of the approach.

Particle transport method for convection-diffusion-reaction problems

Convective transport, both pure and combined with diffusion and reaction, can be observed in a wide range of physical and industrial applications, such as heat and mass transfer, crystal growth or biomechanics. The numerical approximation of this class of problemscan present substantial difficulties clue to regions of high gradients (steep fronts) of the solution, where generation of spurious oscillations or smearing should be precluded. This work is devoted to the development of an efficient numerical technique to deal with pure linear convection and convection-dominated problems in the frame-work of convection-diffusion-reaction systems. The particle transport method, developed in this study, is based on using rneshless numerical particles which carry out the solution along the characteristics defining the convective transport. The resolution of steep fronts of the solution is controlled by a special spacial adaptivity procedure. The serni-Lagrangian particle transport method uses an Eulerian fixed grid to represent the solution. In the case of convection-diffusion-reaction problems, the method is combined with diffusion and reaction solvers within an operator splitting approach. To transfer the solution from the particle set onto the grid, a fast monotone projection technique is designed. Our numerical results confirm that the method has a spacial accuracy of the second order and can be faster than typical grid-based methods of the same order; for pure linear convection problems the method demonstrates optimal linear complexity. The method works on structured and unstructured meshes, demonstrating a high-resolution property in the regions of steep fronts of the solution. Moreover, the particle transport method can be successfully used for the numerical simulation of the real-life problems in, for example, chemical engineering.

Projecte d’urbanització del sector 22 – Polígon industrial de Can Sunyer

L’objecte del projecte és la renovació de les infraestructures i serveis d’un polígon industrial de 28, 5 hectàrees situat al municipi de Sant Andreu de la Barca. Amb les millores es preveu millorar la qualitat de vida dels principals usuaris i la integració del polígon dins la xarxa de polígons de la resta del municipi, per altra banda, es planteja que determinades zones del polígon puguin ser utilitzades com a zones de lleure. La millora de les infraestructures comprén: Xarxa de sanejament, xarxa d’aigua potable, xarxa elèctrica , xarxa d’enllumenat públic, millora del ferm i projecció d’un espai verd públic.

Introducing Basic Systematic Requirements Engineering Practices in Small Organizations with an Easy to Adopt Method

Requirements-relatedissues have been found the third most important risk factor in software projects and as the biggest reason for software project failures. This is not a surprise since; requirements engineering (RE) practices have been reported deficient inmore than 75% of all; enterprises. A problem analysis on small and low maturitysoftware organizations revealed two; central reasons for not starting process improvement efforts: lack of resources and uncertainty; about process improvementeffort paybacks.; In the constructive part of the study a basic RE method, BaRE, was developed to provide an; easy to adopt way to introduce basic systematic RE practices in small and low maturity; organizations. Based on diffusion of innovations literature, thirteen desirable characteristics; were identified for the solution and the method was implemented in five key components:; requirements document template, requirements development practices, requirements; management practices, tool support for requirements management, and training.; The empirical evaluation of the BaRE method was conducted in three industrial case studies. In; this evaluation, two companies established a completely new RE infrastructure following the; suggested practices while the third company conducted continued requirements document; template development based on the provided template and used it extensively in practice. The; real benefits of the adoption of the method were visible in the companies in four to six months; from the start of the evaluation project, and the two small companies in the project completed; their improvement efforts with an input equal to about one person month. The collected dataon; the case studies indicates that the companies implemented new practices with little adaptations; and little effort. Thus it can be concluded that the constructed BaRE method is indeed easy to; adopt and it can help introduce basic systematic RE practices in small organizations.

Competitor Information andCompetitive Knowledge Management in a Large Industrial Organization

Thisthesis supplements the systematic approach to competitive intelligence and competitor analysis by introducing an information-processing perspective on management of the competitive environment and competitors therein. The cognitive questions connected to the intelligence process and also the means that organizational actors use in sharing information are discussed. The ultimate aim has been to deepen knowledge of the different intraorganizational processes that are used in acorporate organization to manage and exploit the vast amount of competitor information that is received from the environment. Competitor information and competitive knowledge management is examined as a process, where organizational actorsidentify and perceive the competitive environment by using cognitive simplification, make interpretations resulting in learning and finally utilize competitor information and competitive knowledge in their work processes. The sharing of competitive information and competitive knowledge is facilitated by intraorganizational networks that evolve as a means of developing a shared, organizational level knowledge structure and ensuring that the right information is in the right place at the right time. This thesis approaches competitor information and competitive knowledge management both theoretically and empirically. Based on the conceptual framework developed by theoretical elaboration, further understanding of the studied phenomena is sought by an empirical study. The empirical research was carried out in a multinationally operating forest industry company. This thesis makes some preliminary suggestions of improving the competitive intelligence process. It is concluded that managing competitor information and competitive knowledge is not simply a question of managing information flow or improving sophistication of competitor analysis, but the crucial question to be solved is rather, how to improve the cognitive capabilities connected to identifying and making interpretations of the competitive environment and how to increase learning. It is claimed that competitive intelligence can not be treated like an organizational function or assigned solely to a specialized intelligence unit.

Permanent magnet synchronous motor for industrial inverter applications - analysis and design

During the latest few years the need for new motor types has grown, since both high efficiency and an accurate dynamic performance are demanded in industrial applications. For this reason, new effective control systems such as direct torque control (DTC) have been developed. Permanent magnet synchronous motors (PMSM) are well suitable for new adjustable speed AC inverter drives, because their efficiency and power factor are not depending on the pole pair number and speed to the same extent as it is the case in induction motors. Therefore, an induction motor (IM) with a mechanical gearbox can often be replaced with a direct PM motor drive. Space as well as costs will be saved, because the efficiency increases and the cost of maintenance decreases as well. This thesis deals with design criterion, analytical calculation and analysis of the permanent magnet synchronous motor for both sinusoidal air-gap flux density and rectangular air-gapflux density. It is examined how the air-gap flux, flux densities, inductances and torque can be estimated analytically for salient pole and non-salient pole motors. It has been sought by means of analytical calculations for the ultimate construction for machines rotating at relative low 300 rpm to 600 rpm speeds, which are suitable speeds e.g. in Pulp&Paper industry. The calculations are verified by using Finite Element calculations and by measuring of prototype motor. The prototype motor is a 45 kW, 600 rpm PMSM with buried V-magnets, which is a very appropriate construction for high torque motors with a high performance. With the purposebuilt prototype machine it is possible not only to verify the analytical calculations but also to show whether the 600 rpm PMSM can replace the 1500 rpm IM with a gear. It can also be tested if the outer dimensions of the PMSM may be the same as for the IM and if the PMSM in this case can produce a 2.5 fold torque, in consequence of which it may be possible to achieve the same power. The thesis also considers the question how to design a permanent magnet synchronous motor for relatively low speed applications that require a high motor torqueand efficiency as well as bearable costs of permanent magnet materials. It is shown how a selection of different parameters affects the motor properties. Key words: Permanent magnet synchronous motor, PMSM, surface magnets, buried magnets

Gas-liquid mass transfer in bubbly flow: Estimation of mass transfer, bubble size and reactor performance in various applications

Gas-liquid mass transfer is an important issue in the design and operation of many chemical unit operations. Despite its importance, the evaluation of gas-liquid mass transfer is not straightforward due to the complex nature of the phenomena involved. In this thesis gas-liquid mass transfer was evaluated in three different gas-liquid reactors in a traditional way by measuring the volumetric mass transfer coefficient (kLa). The studied reactors were a bubble column with a T-junction two-phase nozzle for gas dispersion, an industrial scale bubble column reactor for the oxidation of tetrahydroanthrahydroquinone and a concurrent downflow structured bed.The main drawback of this approach is that the obtained correlations give only the average volumetric mass transfer coefficient, which is dependent on average conditions. Moreover, the obtained correlations are valid only for the studied geometry and for the chemical system used in the measurements. In principle, a more fundamental approach is to estimate the interfacial area available for mass transfer from bubble size distributions obtained by solution of population balance equations. This approach has been used in this thesis by developing a population balance model for a bubble column together with phenomenological models for bubble breakage and coalescence. The parameters of the bubble breakage rate and coalescence rate models were estimated by comparing the measured and calculated bubble sizes. The coalescence models always have at least one experimental parameter. This is because the bubble coalescence depends on liquid composition in a way which is difficult to evaluate using known physical properties. The coalescence properties of some model solutions were evaluated by measuring the time that a bubble rests at the free liquid-gas interface before coalescing (the so-calledpersistence time or rest time). The measured persistence times range from 10 msup to 15 s depending on the solution. The coalescence was never found to be instantaneous. The bubble oscillates up and down at the interface at least a coupleof times before coalescence takes place. The measured persistence times were compared to coalescence times obtained by parameter fitting using measured bubble size distributions in a bubble column and a bubble column population balance model. For short persistence times, the persistence and coalescence times are in good agreement. For longer persistence times, however, the persistence times are at least an order of magnitude longer than the corresponding coalescence times from parameter fitting. This discrepancy may be attributed to the uncertainties concerning the estimation of energy dissipation rates, collision rates and mechanisms and contact times of the bubbles.

Compromise solutions for bankruptcy situations: a note

Although classic bankruptcy problems take into account a single claims vector, Pulido et al. (2008) show that there are real bankruptcy situations where agents face more than one reference vector. In particular, they consider the claims and an additional reference vector. To analyze these situations, they propose the extreme and the diagonal approaches. Nonetheless, the former approach depends on the order of the vectors: if we interchange the claims and the reference vectors, the result changes. Moreover their study is limited to the case in which the reference vector is lower than the claims vector. In the present note, we propose an extension that solves these short- comings by introducing the idea of impartiality. Keywords: bankruptcy problems; reference point; compromise solution; impartiality.

Unas reflexiones sobre localización industrial aplicadas a la industria catalana

El trabajo es una reflexión sobre las pautas de localización industrial,con una especial referencia a la industria de la economía catalana. En el estudio se realiza una revisión de los principales factores explicativos de la localización y aglomeración industrial defendidos por las teorías de la localización. Con estos argumentos de base, posteriormente el análisis se aplica a una división de catorce grandes sectores industriales catalanes. El objetivo es llegar a conclusiones acerca de si los sectores en los que la industria catalana muestra mayor grado de especialización son también aquellos que, a tenor de los principales factores que inciden en la localización industrial, tienen mayor riesgo de sufrir futuras deslocalizaciones.

Caracterización de las almazaras cooperativas catalanas, análisis interno de la fase industrial o de transformación

En el presente artículo hemos tratado de analizar las características de las almazaras cooperativas catalanas con la finalidad de destacar no solamente sus elementos más importantes de gestión sino también sus principales debilidades.Las cooperativas se consideran instrumentos útiles para acometer políticas de desarrollo económico y bienestar social. A pesar de ello hay un gran debate abierto acerca de la eficiencia de estas organizaciones, que plantean el interrogante de si están en condiciones de competir con éxito en una economía cada vez más abierta, liberalizada y global. A través de las encuestas que hemos realizado al conjunto de las cooperativas oleícolas de Catalunya, hemos podido averiguar sus características distintivas, así como las principales desventajas y problemas a los que se enfrentan. Creemos puede ser de interés analizar las características de estas organizaciones, que tanto desde el punto de vista organizativo como de recursos humanos, como financiero, las hace diferentes de otro tipo de organizaciones pero que sin embargo, han de hacer frente a un mercado cada día más exigente y competitivo.

Aproximación multicriterio a la estructura industrial de la economía española

El trabajo presenta una forma alternativa de analizar la estructura industrial de la economía española. En concreto, el estudio se interesa tanto por la vertiente de la estructura productiva sectorial, como por la vertiente de la especialización territorial. Mediante la técnica multicriterio se acceden a programas de optimización que, a partir de las variables que se consideran más relevantes (empleo, valor añadido y número de establecimientos) determina, por un lado, qué sectores son los más significativos dentro del tejido industrial de la economía española, y por otro lado, se llega a determinar qué Comunidades Autónomas son las que adquieren mayor peso relativo para cada uno de los sectores industriales.

Factores determinantes de la concentración industrial de la economía española

El objetivo de este trabajo es exponer cuáles son los factores que han influido en el modelo de concentración industrial de la economía española y analizar si son los que postulan las teorías más significativas del comercio. El análisis se realiza en dos momentos distintos del tiempo para evaluar si se han producido cambios significativos. A partir de los índices de concentración relativa y absoluta, calculados para los años 1995 y 2003, sobre 24 sectores de las 17 CCAA, se construyen dos modelos de regresión que son los que permiten el análisis del mapa industrial. Los resultados indican que la localización de la industria puede explicarse en gran medida por las variables sugeridas por las teorías del comercio y que entre ambos periodos no ha habido grandes cambios en los patrones de concentración. Asimismo, el factor que se revela como más determinante de la concentración relativa y absoluta de la industria española es el tamaño y acceso a los mercados.

La decisión de endeudamiento y los factores de mayor relevancia. Una aplicación empírica en la empresa industrial española

El presente trabajo aborda el estudio de los factores determinantes del endeudamiento empresarial para contrastar empíricamente la hipótesis del Pecking Order. El endeudamiento empresarial se mide junto a su madurez y para los diferentes tamaños empresariales dada la importancia de diferenciar sus posibles efectos contrapuestos o compensados. Los modelos utilizados para el contraste de hipótesis se han estimado con una muestra de 1.320 empresas manufactureras españolas proporcionada por la Encuesta sobre Estrategias Empresariales (ESEE), para el período 1993-2001. El análisis empírico aplica un modelo multivariante de regresión logística que permite concluir que la teoría del Pecking Order es la de mejor cumplimiento, además de constatarse que las empresas de menor tamaño tienen mayores dificultades de acceso a la financiación con deuda a largo plazo.